SPA Computers Pvt Ltd Bangalore : ELECTRONIC HARDWARE DESIGN ENGINEER

[Admin]

SPA Computers Pvt Ltd

Designation: WALKIN EVENT FOR ELECTRONIC HARDWARE DESIGN ENGINEERS
Experience: 0 - 1 Years
Location: Bengaluru/Bangalore

Job Description
ADDRESS:
SPA COMPUTERS (P) LTD.
NO.A4, NGEF INDUSTRIAL ESTATE,
MAHADEVAPURA,
Near ESI Bustop (Mahadevapura)
Bangalore-48
Landmark:.The road opposite to ABB(Bhoruka tech park).Come straight towards Axis Bank ATM.Get inside KSSIDC Gate & take right

Desired Candidate Profile
Mandatory Skills to take the test : (Any of the below)
• HAVING DONE ACADEMIC PROJECTS IN ELECTRONIC HARDWARE DESIGN
• BASIC KNOWLEDGE OF CIRCUIT SCHEMATICS WOULD BE PREFERABLE.
• KNOWLEDGE ON ANY TOOLS LIKE CADENCE,XILINX,ORCAD,MATLAB

Company Profile
SPA Computers Pvt Ltd is an 20 Year old Embedded Product development Company.It is a global leader in Operating System solutions for embedded systems.SPA got selected as the sole distributor in India for QNX software.

Email Address: deepa@spacomp.com
http://www.spacomp.com

Keywords: Board Design

[Guest]

VISHAL MAGANUR
174/1 2nd main 2nd cross
Bhovipalya, Mahalaxmipuram Email:maganurvishal AT gmail.com
Bangalore-560086 Ph: +91 9740248098

OBJECTIVE:
To exhibit my skills with utmost sincerity and learn more from my working ambience by grabbing opportunities that come in my way.

EDUCATIONAL DETAILS:
B.E: University : Visveswariah Technological University, Belgaum.
College : S.J.C Institute of Technology, Chickballapur
Branch : Electronics and communication.

SEM I II III IV V VI VII VIII
PERCENTAGE 74.32 72.12 65.55 60.11 59.55 64.11 66.83 74.40
RESULT FCD FCD FC FC FC FC FC FCD
Aggregate: 66.72 %

PRE – GRADUATION:
Exam Name of the institute Examination Board Year Percentage
P.U.C G.H. College ,Haveri PU Board 2005 74.3
S.S.L.C L.E.M High school,Haveri KSEEB 2003 73.6

TECHNICAL SKILLS:
- Programming in C, CCN.
- Microprocessor 8086, Microcontroller 8051, Logic Design.

SEMINAR PRESENTATION:

- PAPER BATTERY
o It is nano-composite paper made by growing carbon nanotubes on silicon substrate and integrating gap between the tubes with cellulose which is essentially paper. The uniqueness of the device is it can function as both high-energy battery and high-power super capacitor.

PROJECT WORK:

Title : “AUTOMATIC RAILWAY GATE CONTROL USING RF”
Period : August 2008- June 2009
Project brief :
RF based railway gate control is having Transmitter and Receiver section. According to the condition like train is coming or not is detected by transmitter section using IR sensor module and the corresponding bit pattern is sent by transmitter to receiver. The receiver will receive RF signals and it is given to microcontroller after decoding. Microcontroller will issue the signals to stepper motor and controls the operation of gate. There are two IR sensor modules on either side of the gate. The project components are relatively inexpensive making it cost effective.

ACHIEVEMENTS:
- I have participated in District Level Hockey Tournament.

- I have participated in State Level Foot Ball Tournament.

HOBBIES:
Playing cricket, listening music

PERSONAL DETAILS:
Father’s Name : Siddalingappa R Maganur
Mother’s Name : Aruna S Maganur
Date of Birth : 26-06-1987
Sex : Male.
Passport Details : G9792051.
Marital Status : Single
Nationality : Indian.
Languages Known: English, Kannada, and Hindi.


DECLARATION:

I hereby declare that all information’s furnished above are true to the best of my knowledge.

[Guest]

Name : GURURAJA
Email : gururajece AT gmail.com
gururaj_kunda AT yahoo.co.in

To learn and deliver my duties for effective functioning in organization and to reach responsible position in future, work for the betterment of the company in any circumstances.
Total Experience : 2 Years and 5 Months
1. From August 2010 to till date working as Hardware Engineer in M/s. SATTVA eTECH India Pvt. Ltd, Hongasandra, Bangalore.
2. 1.4 Years of Experience in M/s Code &Development Electronics Ltd. Bangalore from 13th April 2009 to 23rd August 2010 worked as Testing & Servicing Engineer.
Work Experience
- Having experience in Hardware Digital and Analog Circuit Designing.
- Having hardware design experience with 32 bit processors.
- Having experience in designing of peripheral interfaces to MCF 5485, MCF5272 Cold
fire processor.
- Used ORCAD software in designing of Schematics and created net list.
- Worked on High Speed Memory interfaces like FLASH, NVRAM, SRAM and SDRAM.
- Having experience in designing of IO interfaces to processor.
- Worked on VME bus systems.
- Expertise in Hardware testing, functionality testing and System Testing.
- Having experience in BDM, Boot loader and Image downloading to flash.
- Having experience in testing of different protocols in Ethernet applications.
- Having good experience in Trouble shooting of PCB’s.
- Having experience in debugging of PCB’s using Logic Analyzers and Digital Oscilloscopes.
- Having Experience in Preparing BOM (Bill of Material) and Technical documentation.
Languages : C, VHDL.
CPUs : MCF5485, MCF5272 Cold fire Processor, 80186, 8086,
8051 Microcontroller. Operating system : Windows 98/2000/XP /Vista/Linux/Fedora 9
Tools Used : PSPICE Simulator, Logic analyzer and Digital Oscilloscopes.
1. Industrial Controller Board (Himagni)
Current Employer : M/s Sattva eTech India Pvt. Ltd.
Client : NPCIL, Mumbai
Duration : 6 months.
Role : Hardware Design &Testing Engineer.
Description :
Industrial controller board is a Motorola MCF 5485 microprocessor based product will be used in embedded systems for Nuclear Power Plants to control different IO Boards.This board incorporates a VME bus interface to communicate with the other VME bus compatible devices.
Responsibilities :
- Involved in the preparation of Hardware Requirement Specification (HRS).
- Hardware Design Implementation.
- Component Selection for the Hardware Design.
- Designed Schematics using ORCAD.
- Designed RS232/485, Ethernet and BDM (Background debug mode) interface to processor.
- Designed different test jigs for IO board application.
- Involved in functional and integration testing of boards.
- Involved in bug fixing and trouble shooting of boards.
2. Robotic control (Data Acquisition System)
Current Employer : M/s Sattva eTech India Pvt. Ltd.
Client : UNAXIS, Switzerland.
Duration : 4 months.
Role : Hardware Design &Testing Engineer
Description :
This system comprises of an analog board built around using AduC841 and a Digital board
with 32 bit Motorola Cold fire MCF 5272 as its core. The analog board acquires and converts
analog signal to digital through DACs and is given to Digital board. The digital board has
facilities to interface with Computer and other peripherals. It has facilities like RS232, RS485
and Ethernet connectivity.
Role and Responsibilities :
- Worked on designing of digital board and its peripheral interfaces.
- Designed digital input and output interface to processor.
- Designed Ethernet and SDRAM interface to processor.
- Involved in hardware testing and debugging.
- Performed functionality testing of both hardware and software.
3. DENET (ETHERNET) Board
Previous Employer : M/s Code &Development Electronics Ltd.
Client : ECIL, Hyderabad
Duration : 4 months.
Role : Hardware Testing Engineer.
Description :
DENET is an 80186 microprocessor based product. This board incorporates a
VME bus interface to communicate with the other VME bus compatible devices and
the VME bus interface is controlled by Virtex FPGA.80186 is interfaced to EEPROMS
and Ethernet chip.
Responsibilities :
- Testing and debugging of boards.
- Used UV Eraser, Universal Programmer and Jtag for testing.
- Unit level and System level testing of boards.
- Worked on EEPROM testing and programming.
- Tested Ethernet chip on custom built tools.
- B.E in Electronics & Communication Engineering with 60.08% from K.V.G.College of Engineering Sullia, D.K., VTU University in 2008.
- PUC Passed with 1st Class 74.83% from Govt. PU College Navunda Kundapur, Pre University Board in 2003.
- SSLC Passed with 1st Class 65.92% from Govt. High School, Maravanthe Kundapur ,KSEEB Board in 2001

[Guest]

RESUME
SWETHA.S
Email :swetha0704 AT gmail.com
CAREER OBJECTIVE :
I am looking forward to take up challenging assignments to the related field of industry. I assure that I will set record and will grow with the organization.
ACADEMIC CREDENTIALS :
Course Board/University School/Institution.
B.E.(Electronics & Communication)
Vishveshwaraya Technological University, Belgaum. East Point College of Engineering & Technology, Bangalore, Karnataka.
Diploma 3 Years (Electronics & Communication)
Technical Board of Education, Karnataka.
CSI Goodwill Polytechnic for Women, Bangalore.
PROFESSIONAL EXPERIENCE
UNDERGOING GRADUATE ENGINEERING TRAINEE (GET) TRAINING IN
M/s.BEML LIMITED,
(UNDER MINISTRY OF DEFENCE), K.G.F

TECHNICAL SKILLS
- Programming Languages : C, C++
- OPERATING SYSTEM : LINUX AND WINDOW 98, XP
- APPLICATION SOFTWARE : CADENCE
- OFFICE TOOLS : MS OFFICE, MS WINDOWS,MS DOS
- Networking :CCNA
STRENGTHS :
- Adaptable to any situation.
- Willing to learn new Technology
- Get along well with colleagues
- A strong will power with desire to contribute and succeed
INDIVIDUAL SKILLS :
- Good Logical and Analytical Skills.
- Communication Skill.
- Highly Motivational.
PROJECT :
1. BIOMEDICAL EMBEDDED BASED PROGRAMMABLE SYRINGE CONTROL SYSTEM
2. HIGH TECH ROBOT WITH WIRELESS CAMERA FOR DETECTION OF EXPLOSIVES

[navneethsingh]

NAVNEETH SINGH A

Email : navneethsingh AT gmail.com

Objective
Seeking an entry level position as a design engineer in a dynamic organization which has carved a niche in the field of electronics design and development. Also looking forward to develop my interpersonal, technical and management skills.
Technology Summary
Languages : C, C++, 8051, Assembly Languages, MATLAB, VHDL & VERILOG
Design tools : Cadence - NCVERILOG, SIMVISION, RTL Compiler; Xilinx ISE and Keil µVision
Project Experience
Boundary Scan Design for Testing Embedded Control Interface
- Undertook literature Survey to understand JTAG standards and Boundary Scan protocols.
- Prepared detailed design and test algorithm for the implementation of boundary scan principle for the embedded controller interface.
- Performed Verilog Coding and simulation using Cadence NCVERILOG tools.
- Test bench was implemented in Verilog.
- Synthesis using RTL Complier on TSMC 0.18u technology.
Certification
Advanced Diploma in VLSI Design & Technology, 2010
Indian Institute of VLSI Design & Training, Bangalore
One-year course in ASIC Design based on Cadence flow. Course work included 150 hours of theory and 200 hours of lab work including industry standard project work.
Education
B.E in Electronics and Communication Engineering, 2010 : 54.25 %
(New Horizon College Of Engineering, Bangalore)
CLASS 12 (PUC) : 65.33 %
(Sri Jagadguru Renukacharya College, Bangalore)
CLASS 10 (CBSE) : 56.2 %
(Kendriya Vidyalaya IISc, Bangalore)

[Guest]

RESUME

Arvind Singh
Email : arvind.singh530 AT sify.com
CAREER OBJECTIVE :
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential.
EDUCATION QUALIFICATION :
- B.E in Electronics Engineering (2006-2010) from Jiwaji University, Gwalior with 64.9% aggregate
- A.I.S.S.C.E-2006 from CBSE with 69% aggregate.
- A.I.S.S.E-2004 from CBSE with 67% aggregate.
SOFTWARE PROFICIENCY :
- Operating Systems : Working Knowledge of Windows-2000 , XP, Windows-7 & .Ubuntu
- Programming Languages : C-language, HTML, Working Knowledge of XHTML, and XML.
- Other Tools : M.S. Office, Linux (Ubuntu,Fedora,Ophcrack)
- Web Designing : HTML, Working knowledge of JavaScript
ELECTRONICS PROFICIENCY :
- Robot Designing
- PCB Designing
- Working Knowledge of SMD(Surface Mount Devices)
- Telecommunication Systems
- Embedded Electronics
- Electronics Designing
Area of Interest : Robotics, Embedded Systems, PCB designing, Surface Mount Technology, Electronics Designing
CURRICULAR-ACTIVITIES :
- Attended “Cognizance-08” at IIT Roorkee
- Participated in “Techkriti-09” at IIT Kanpur
- Participated in “Beagle-Board Workshop” organized at IIT Kanpur in Association with “Texas Instruments, Bangluru”
- Worked as a Web-Designer for Institute of Engineering Jiwaji University, Gwalior
- Won the “Best-Design” award for Designing GSM Robot at Technical-Fest of Institute of Engineering Jiwaji University, Gwalior
- Worked as an organizer of Technical-Fest of Institute of Engineering Jiwaji University, Gwalior
- Worked as a Student Partner in Cognizance-10 annual technical festival of IIT Roorkee from Gwalior Division.
LATEST PROJECTS :
- Projects : - 3G operated Unmanned Ground Vehicle, Solar Lighting System, Ultrasonic Ranging System, Firefighting Robot, GSM home Automation, Digital Security System, RF based wireless Data Transmission, Pipe Climbing Robot, Light following Robot, Quad rotor Helicopter, Unmanned Glider, Underwater Robotics, RFID Systems, Wireless Machine Monitoring System for industries.
- Platform : - Embedded C & 8051 Microcontrollers
- Venue : - VedikLabs Inc, Gwalior
EXPERIENCE :
- Running a partnership company named VedikLabs Inc., Gwalior providing training and development services in the field of Robotics, Embedded Systems & Solar Power Systems since April, 2008.
PERSONAL SKILLS :
Highly innovative and confident, Able to adapt to the ever changing nature of environment, Systematic working style by setting deadlines, Quick to learn, hardworking, sincere, Ability to do something new, comprehensive problem solving abilities, ability to deal with people diplomatically, willingness to learn, team facilitator.
VOCATIONAL TRAININGS :
Training : 1
- Title : Manufacturing and Testing of Cables
- Duration : 15 Days
- Venue : Universal Cables Limited (UCL), Satna
Training : 2
- Title : Embedded Systems (8051 Microcontrollers)
- Duration : 40 Days
- Venue: Institute of Electronics and Telecommunication Engineers (IETE)

[Guest]

dear sir/madam,
please help me to remove my resume from your website...

[codendev]

CURRICULAM VITAE
DEEPAK

OBJECTIVE :

To work in a challenging and creative environment and effectively contribute my skills and abilities towards the goal of the organization, where I could constantly learn and successfully deliver solution to problems.
PROFILE SUMMARY :
- A qualified B.E having above 4 years of exposure in designing and developing of windows & web based applications by using ASP, ASP.Net, C#, XML as well as Relational database MS SQL Server with ADO.NET.
- Sound knowledge on networking Concepts and LAN technologies.
- Have a good development experience in Client-Server Application.
- Thorough understanding of web development life cycle.
- Ability to learn new technologies quickly.
TECHNICAL SKILLS :
Programming Languages C, C++, C#, ASP.Net, ADO.Net.
Operating Systems Windows-NT, 7, XP, and Vista.
Database Microsoft SQL Server 2005.
Computer Science Concepts
Scripting language
Markup Languages Software Engineering, DBMS, OOP, Data Structures, Computer Networks.
JavaScript
HTML, CSS.
WORK EXPERIENCE

Company : icent Technologies Pvt Ltd, Bangalore.
Duration : From August 2006 to till date.
Designation : Software Engineer.
PROJECTS UNDERTAKEN
Project #1
Title of the Project : Stock dealing
Role : Team Member
Team Size : 9
Technology : ASP.NET, C#, SQL Server.
Database : SQL Server 2005.
Description :
This project is basically a processing, storing, developing the details for KANKRIYA ENTERPRISE. Effectively organize the incoming product details, quantity sales on the day or month or year, Available Stocks, Customer details. The main objective of KANKRIYA STOCKMAINTENANCE is to provide the database to organize the details of product like stock in, stock out, and Customer details.
The system should provide a login mechanism for the Administrator, Top Management, and the sales force of Kankriya. The interface available to any user should be based on the role of the user and only appropriate screens should be shown to any user.
Responsibilities :
- Involved in the development phase to gather requirements from various sources. Co-ordination with team members to discuss the scope of the project.
- Database Design and Development.
- Developed database interactions using ADO.NET (Data Adapter, Data Set and Command Objects).
- Developed the error handling Methodology and data validation for various inputs.
- Security and confidential information.
- To speed up processing within the firm.
Project #2
Title of the Project : Enterprise System.
Role : Team Member
Team Size : 6
Technology : ASP.NET, C#, SQL Server.
Database : SQL Server 2005.

Description :
A customized software package for Preparing and Maintaining Central Excise Invoices, Ledger and generating required reports. The primary data of the software is the Central Excise Invoice Details based on which the Central Excise invoice format is to be printed on a pre-printed form, Purchase-Sales Ledger the returns report based on the give period needs to be generated.
Responsibilities :
- Involved in the development phase to gather requirements from various sources. Co-ordination with team members to discuss the scope of the project.
- Developed database interactions using ADO.NET (Data Adapter, Data Set and Command Objects).
- Developed the error handling Methodology and data validation for various inputs.
- Developed Web Interface using ASP.NET Web Forms.
- Security and confidential information.
- Means of involvement of plans and actions.
- To speed up processing within the firm.

[Guest]

RESUME
SHALINI S.V
Email : shalini.shetty87 AT gmail.com
Objective :
Looking forward to work in an intellectually stimulating environment which is in line with my aspirations to be in a position of responsibility, and where I can contribute the best of my skills and efforts for the growth of the organization
Education summary :
- Post Graduation (Electrical & Electronics) M.S.Ramaiah institute of technology, Bangalore, Karnataka, with 79.5% (1st sem), 78.8% (2nd sem). 77.5% (3rd sem) and (4th sem awaiting) in 2012.
- B.E (Electronics & Communication) from Vidya Vardhaka College of Engineering, Mysore/V.T.U Karnataka, with 60% aggregate in 2009.
- PUC from St. Agnes College, Mangalore, Karnataka, with 55%.
- SSLC from St. Joseph’s school, sakleshpur, Karnataka, with 78.7%..
TECHNICAL SKILLS :
Programming Languages : Assembly, C programming, Embedded C, Verlog HDL, JAVA,J2EE
Assembly Languages : 8085, 8086, 8051, VHDL
Areas of Interest : Microcontroller, Microprocessor, logic
Design, VLSI and Embedded systems, Control systems
Achievements : National Level ROBOCORE 2012 project presentation.
IEEE paper presentation on “BATTLEFIELD ROBOT” in International
Conference (ICCTEM).
Training on JAVA, J2EE, STRUCT from Uttara info solutions Pvt.Ltd
C programming from NIIT with 75%
Electives Studied : DCPA, OS, VLSI, Embedded system design
Multimedia, cryptography, PLC, 8051 and 8086
Platforms : WIN98, WIN XP, WIN98
Protocols : Serial communication (RS232).
Skills & Strengths :
- Working under constant pressure with excellent output.
- Modeling and analyzing of complex ideas.
- Sense of responsibility and a very hard worker.
- A self motivated team player with excellent interpersonal skills.
- Excellent public speaking abilities and communication skills.
PROJECT EXPERIENCE :
M.Tech final year project :
1) Project Name “Battlefield robot”
I have actively participated in national level ROBOCORE 2012 for project presentation and International level conference(ICCTEM) for paper presentation and publication on “Battlefield Robot”
Duration 7 Months
Team 1
Role Designing circuit, PCB design and fabrication, Programming in assembly.
Description The radio frequency controlled military robot can be used in defense and in real war field. The military robot will be able to substitute the real human soldier in the battlefield. The objective of the project is to minimize human casualties in terrorist attack. It has got gun through which bullet can be fired. Radio camera is in synchronization with the gun can rotate vertical up and vertical down ,horizontal left and horizontal right to a safe firing limit .A laser gun has been installed on it so that it can fire on remotely when required. Which could be seen on a remote monitor and action can be taken accordingly. It can silently enter into enemy area and send us all information through its tiny camera eyes. It is designed for fighting as well as suicide attack when it is captured by enemies. As a self destructive robot acts as mobile bomb, which will destructs itself by explosion covering larger area, thus defeating enemies by self destruction.
M.Tech mini projects :
1) Project Name “Traffic light controller”
Duration 1 Month
Team 1
Role Design of digital circuits and writing code in assembly, soldering of circuits.
Description Traffic Lights usually contain three lamps : red, amber and green. Here is a small project wherein you can control the Traffic Light of a four way intersection using a single controller. Consider four roads ROAD A, B, C and D and their corresponding signals red, amber and green each represented by a LED. So in all there are 12 LED’s each of which is connected to a controller pin. In this code the duration of all green signals are the same and the duration of all amber signals are same. This duration is defined by DURATION_GREEN which is 10 seconds and DURATION_AMBER which is 2 seconds.
Responsibilities - Involved in Complete concept designing and architecture.
- Coding & implemented the functionality.
- I had taken the complete responsibility of the project.
2) Project Name Speed Control of DC motor using PWM technique using 8051”
Duration 1 Month
Team 1
Role Developer
Description Pulse width Modulation or PWM is one of the powerful techniques used in control systems today. They are not only employed in wide range of control application which includes : speed control, power control, measurement and communication. Pulse-width Modulation is achieved with the help of a square wave whose duty cycle is changed to get a varying voltage output as a result of average value of waveform.
B.E Academic Project :
1) Project Name An efficient implementation of Digital Signature Algorithm (DSA) - using verilog.
Won 3rd prize in “charge Carriers”, an event by the Alumni Association to recognize and reward the Best projects by E&C students, held on the date 23rd may 2009.
Duration 1 year
Team 4
Role Implementation of RSA algorithm.
Description A digital signature is the encrypted hash value of file being signed. The digital signature claim supreme importance in the entire network based applications due to the fact that it offers triple security services- authentication, data integrity and non-repudiation. We have developed a model in Verilog HDL for Digital Signature Algorithm (DSA) with an eye for efficient hardware implementation. The digital signature scheme consists of two main parts : the Secure Hash Function SHA-1 and a RSA algorithm. We have used a simple and straightforward SHA-1 implementation. We have taken a non-conventional yet an efficient approach to the RSA unit by incorporating Ancient Indian Vedic principles of multiplication (urudva Tiryakbhyam Sutra). Successful simulation of the HDL. Code using MODELSIM has been carried out. Our work can be further extended-synthesized and implemented in hardware.

Declaration :
I hereby declare that the above written particulars are true and correct to the best of my knowledge and belief.
Place : Bangalore [Shalini S.V]

[Guest]

I am Deepak Kanaujiya completed my B.E.(E&TC) with 73% and also completed course of VLSI, FPGA and verification. So please if there is any opening for electronic VLSI designer inform me