Nasser.S. Al Hajri Corporation : Saudi, Qatar Mechanical freshers

[Admin]

NASSER.S.ALHAJRI CORPORATION ,SAUDI ARABIA & QATAR
http://www.alhajricorporation.com

Company Profile
INTERNATIONAL INDUSTRIAL CONTRACTING COMPANY ENGAGED IN THE CONSTRUCTION OF 15 HEAVY CONSTRUCTIONS LIKE REFINERY,PETROCHEMICAL,OIL&GAS INSTALLATIONS, POWER PLANTS ETC WITH A MANPOWER STRENGTH OF 40,000, SPREAD OVER SAUDI AND QATAR

Experience:0 - 2 Years
Location:Saudi Arabia

Job Description:
FRESH MECHANICAL ENGINEERS,(ONLY INDIAN NATIONALS)WITH AN APTITUDE FOR HEAVY CONSTRUCTION INDUSTRY LIKE PETROCHEMICAL,REFINERY,OIL&GAS INSTALLATIONS, WILLING TO WORK IN HIGHLY INHOSPITABLLE TERRAIN IN SAUDI ARABIA TO BE PROMOTED TO MANAGERS SOON

Desired Candidate Profile:
ONLY INDIAN NATIONALS FRESH BE/BTECH /DIP IN MECHANICAL ENGINEERING WITH A PROSPECTIVE APTITUDE FORCARRER BUILDING IN THE FIELD OF HEAVY CONSTRUCTION INDUSTRY LIKE PETROCHEMICAL,REFINERY, OIL& GAS INSTALLATIONS, POWERPLANT ETC ON PERMANENT BASIS

Address:WORLDlink Overseas Consultants
Amretheswari Complex,
Railway Station Junction, KP Road
Kayamkulam
Trivandrum - Kerala ,INDI 690502
Email Address: jkr@worldlinksindia.com

Keywords: BE BTECH DIPLOMA MECHANICAL ENGINEERS OF HIGH CALIBRE AND EXPERTISE IN THE FIELD OF CONSTRUCTION OF PERTOCHEMICAL, REFINERY , POWERPLANTS , OIL AND GAS INSTALATION S OF LARGE VOLUME USING STATE OF THE ART TECHNOLOGY EQUIPMENTS

[sunilmech.mce@gmail.com]

CURRICULUM VITAE
SUNIL KUMARA
EMAIL ID : sunilmech.mce AT gmail.com

CAREER OBJECTIVE :
Ambition to work in an organization where the best use of my talent, knowledge, dedication, hard work & sincerity can be made. I am seeking a high quality work life through challenging assignments, meaningful career growth and opportunities for value addition and professional development.

WORK EXPERIENCE :
Company : Arkay Fabrication Steel Systems Pvt. Ltd, Bangalore, INDIA.
Designation : Quality control Engineer.
January-2011 To Till Date.

Company profile : Arkay Fabrication Steel Systems Pvt. Ltd, Bangalore.
Offering world-class designing and robotic simulation facilities along with state of the art manufacturing capabilities.
- Welding Jigs & Checking Gauge Design & Manufacturing - Weld Shop & Assy Shop
- Special Purpose Machine design & Manufacturing.
- Design Simulation Facilities -- Robotics & Manual Welding Process.
Their main customers are L & T KOMATSU, TEREX, LEYLAND, MARUTI SUZUKI, JCB, KOBELKO, ESCORTS, MAHINDRA, CUMMINS, ECTRA, SONALIKA INTERNATIONAL, CATERPILLAR, POWERSCREEN, DOUGLAS, McCORMICK, PERKINS.
Working on L & T- Komatsu Limited [LTK]
Buckets : Track Frame;
1) PC 200- 0.93 Model 1) PC-200 Model
2) PC 130- 0.64 Model 2) PC-130 Model
3) PC 130- 0.53 Model

RESPONSIBILITIES :
- To Ensure Quality Control.
- Inspection of fabricated products from first stage to final stage.
- Inspecting the defects of welding.
- Maintain discipline according to safety rules.
- To encourage new product development activities.
- To prepare management information reports for progress in the department.
- Ensured proper housekeeping and coordinating with workers.
- Conducting continuous improvement projects.
- Organizing quality circles in department.
- Shop floor administration, handling skilled manpower.

ACADEMIC PROFILE :
B.E in Mechanical Engineering at Malnad College of Engineering, Hassan with an aggregate of 67.50%.
Year Course Institution Board/University Percentage
2010 B.E MECHANICAL (no backlogs) Malnad College of Engineering, Hassan VTU, Belgaum 67.50
2006 DIPLOMA MECHANICAL
Smt. L.V. Govt. Polytechnic, Hassan DTE, Bengaluru 73.32
2003 S.S.L.C Maruthi high school,Melagodu Hassan KSEEB 81.92

PROJECT :
1. Fabrication of Wind mill (In Diploma)
2. Thickness profile measurement of Deep Drawn cups using Vegetable oils as Lubricant
(In Engineering)

AREAS OF INTERESTS :
- Quality Control
- Manufacturing process
- Design Engineering
- Thermodynamics
- IC Engines

CO- CURRICULAR ACTIVITIES :
- Organizer of the event AALOCHANA-2009, held in MCE Hassan.
- Active Member of ISTE, MCE Branch, Hassan.

SOFTWARE SKILLS :
- Caps mill
- Caps turn
- Solid edge V18
- ANSYS
- Auto cad
- Have good knowledge and command over MS Office, Power-Point and Excel.

[Guest]

RESUME
ABDUL KADIR ALWARE
E-mail : kadir.alware123 AT gmail.com

Career Objective :
To secure challenging position where I can effectively contribute my knowledge & skills for growth of company.

Key Skills :
- Over 1 years of professional work experience as a Quality Control Engineer in Mechanical field.
- Preparing all the necessary Work Procedure, QAP, WPS & PQR for all jobs and getting approval / re-approval from client.
- Prepare periodic reports on quality checks conducted and submit them for review to the higher management.
- Handle the task of implementing quality deliverables as per customer requirement and internal procedure.
- Conducting and coordinating with internal ISO Auditing & implementing ISO standards.
- Check the status of production by conducting trails at every stage of production like raw mtls, work in process, inventory, storage, ware housing etc.
- Review the fabrication drawing & QAP for verification the inspection record.
- Observing & Inspecting all NDT test such as DP, MPI, UT, etc.
- Maintaining all the Inspection record in their proper formats.
- Arrange the technician on site as per inspection call.
- Review & Maintain the welding documents like WPS, PQR & WPQ.
- Suggest the vendor for welder qualification as per job requirement.
- Conduct the welder qualification test as per WPS & PQR.

Professional Experience :
1. UNITED VAN DER HORST LTD. Navi Mumbai. (1st July 2011 to till date)
Designation :- ASSISTANT QUALITY CONTROL ENGINEER.
Company Profile :-
- United Van Der Horst Ltd, is an ISO 9001 : 2008 & API Approved company, Design, manufacture and
Remanufacture hydraulic and pneumatic cylinder, manufacture connector and ring gasket
Remanufacture of ram BOP and annular BOP for oil and gas industry. Reconditioning of Marine field components Piston crown, Valve Seat, Spindle, Cylinder Head etc.

Job Profile :-
- Pre and final inspection.
- Involved in the preparation of document / procedure like PQR, WPS & QAP for approval / re-approval from client.
- Recommend detail scope of work to Mkt. Dept.
- Maintaining of non-conformance record & the respective correction action plan.
- Ensure that the welding, heat treatment, hardness testing, inspection &NDT are in compliance with ASME codes specification.
- Coordinating with third party inspection agency.
- Carry out NDT test like liquid penetrate tests and magnetic particle inspection tests.
- Interpretation for Ultrasonic tests, MPI tests and Radiographic inspections.
- Conducting pressure test (hydro / pneumatic / oil).
- Hands on experience in different types of instruments such as micrometers, bore gauges, hardness tester, surface roughness tester, thread gauges, inside micrometers, groove micrometer, dial calipers etc.
- Maintain calibration certificates for gauges and measuring instruments, corresponding records.
- Coordinating with client inspector for inspection & raise inspection notifications.
- Inspections of raw materials plates, welding consumables of vendors as per code and client requirements.
- Inspection of Surface Preparation and coating.

Education :
- B.E Mechanical Engineering, 2011 from Rajendra Mane College of Engg &Tech (Affiliated Mumbai University ) Passed with 68.86%..
- H.S.C passed with 55.17% from M.A Amien&Y.A Parkar Jr College of kalusta (Chiplun) Maharashtra.
- S.S.C passed with 72.12% from Maharashtra High School Chiplun, Maharashtra.

Technical skill :
- AUTOCAD 2007
- Non destructive test : DP, MPI, RT(ASNT II)

Declaration :
I hereby declare that all the details given above are correct and true to best of my knowledge and belief.
Date : (Mr. ABDUL KADIR ALWARE)
Place : Mumbai

[Guest]

JINAS T
jinasthettan AT gmail.com

Rewarding and challenging high level position in a reputed company that offers varied job responsibilities in the field of mechanical engineering and will utilize my tactical as well as managerial abilities.

SYNOPSIS :
- Presently associated with BOC India LTD, Manglore, India.
- Has knowledge of PFD and P&ID, Equipment drawings, Plot plan, Process plant layout, Piping Welding, and Erection & Testing.
- Good knowledge in Project Design and Management System (PDMS).
- Proficient in Flexibility analysis of piping systems.
- Team player with strong analytical and leadership skills.

TECHNICAL SKILLS :
- Zero/Intermediate/Bulk level MTO.
- Pressure design of Process Piping and Component as per ASME B 31.
- Flexibility analysis of piping systems.
- Hydraulic design of Liquid Piping and Pipelines (Pipe sizing, Pump head & power calculations)
- Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning.

1. LAYOUT :
- Proficient in preparing G.A Drawings and Isometrics based on P&ID and plant layout.
- Proficient in developing Rack Piping and Tank Farm Piping.
- Knowledge of type of Supports, & its Selection and Expansion loop design.
- Proficient in Nozzle Orientation.
- Knowledge of other department like : P&ID, Equipment Drawing, Hook up, Civil.

2. MATERIAL :
- Knowledge of preparing Material Specifications
- Knowledge of preparing Data Sheets.
- Familiar with relevant international codes and standards.
- Knowledge of Reinforcement Pad & Miter Bend calculations.

SOFTWARE SKILLS :
o Proficient in Piping drafting and AutoCAD.
o Familiar with Caesar2 (Static analysis) software.
o Knowledge of operating systems.
o Proficiency in PDMS.

CAREER HISTORY :
May-2010 -Present Piping Engineer
BOC India LTD, Mangalore, India
BOC India - The Gases Specialist Global expertise adapted for the Indian needs - this is the mantra which BOCI has been using for the last 75 years to satisfy its customers. We supply more than 20,000 gases and mixtures - that make steel plants more efficient, help conserve our environment, preserve food, help hospitals to sustain lives and in general make our customers more productive.
Current Industrial Project : Compressed Air and Nitrogen Plant
Duties and Responsibilities :
- Analyzing the drawing and give necessary instructions to the fabricators.
- Analyzing the work progress and reporting to the site in charge.
- Find out the modifications as per the site condition during erection and reporting to the Authority for necessary change.
- Keeping and maintain the fit up report and welding report.
- Overall supervision of welding and fabrication works in the work site.
- Analyzing the quality of each joint.
- Ensure safe working condition to all workers.

In the service Department :
- Supervising and analyzing the maintenance schedule.
- Supervision of the fabrication works in the work shop.
- Making the daily report of progressive work in the department.
- Supervision of break down works of the tillers, tractors, harvesters and other products.

Other duties :
- Maintain a good relation with the engineers and workers in each department.
- Maintain a regular and complete submission of daily report to the Asst. Engineer in the department.

ACADEMIC PROJECT :
Title : POWER GENERATING HUMP
Description : The power generated when a vehicle passes over a speed brake is converted to dc current and stored in a battery.

ACADEMIA :
B.Tech (Mechanical Engineering) College of Engineering, Thalassery. Scored 62% 2010
XII Subulussalam HSS,Areacode Scored 69% 2006
X Al Ansar Public School, Mundamparamba Scored 84% 2003

TRAINING :
Piping Design & Engineering Per ASME B 31.3, IPEBS (Institute of Piping Engineering & Building Services), Hyderabad

[Guest]

RESUME
Name: Ejaz Ahmad
email: ejzahmad019 AT gmail.com

Objective :
- A challenging to be a part of the mechanical Industry & Construction Industry work for the benefit of the organization by applying any knowledge, skill, & efforts.

Experience :
Organization :-Blue Star Engineering Services (Beawar, Rajasthan)
Clint Company : R.K.M powergen pvt ltd (Khrasiya, Chhattisgardh)
Duration : - 5th July 2011 to 10th October 2012
Designation : - Site Engineer

Site Responsibility :
- Fabrication of Bunker (Ring beam+Shell+Hoper) as per drawing.
- Pipe fabrication as per drawing.
- Preparing RFI & calling to Clint Company’s QA/QC engg. For inspection.
- Checking Groove, Root face, Visual welding inspection (SMAW/GMAW) as per WPS & physical dimension (as per drawing), surface irregularities, outer cracks, corner cracks etc.
- Perform Visual Inspection on completed welds for the occurrence of Porosities, Cracks, Undercuts, and Spatters, excess penetration lack of fusion, and taking corrective action prior to Non Destructive Testing.
- Checking DPT, kerosene test.
- Preparing protocols.
- Fabrication of other structure like precast molding frame from ISA, ISMC.
- Provide information the production department regarding the quality problem.
- Tank Fabrication and inspection as per drawing.

1. Top Dish part along with Air vent and Sight Glass.
2. Bottom dish part
3. Inner shell
All these three parts are made separately by mechanical application i.e. cutting of
Sheet material, tack in, grinding, TIG welding, denting and buffing, DPT
Testing is done at all the welding portions then assembly of all these parts is done.
- Hydro testing of tank by filling water.
- Proper tank insulation.
- Cladding (outer shell)
- Duct and Hopper manufacturing
- BMC Unit manufacturing.
- Checking welder’s welding test.
- Man handling & material issuing from store.
- To submit the daily & weekly report.

Key Skill :
- Computer skill : MS Office, MS Excel
Relevant Courses Taken in college
- Project management,
- Agile manufacturing
- Total quality management
- Automotive engineering ,
- Foundry technology

CURRICULUM PROJECT :
Project title : “Design and Fabrication of sieve analysis testing device”
Brief overview : The objective of this project is to simplify the device at minimum Cost for the application of sand grain test in foundry lab. The device has been made by using ten samples of galvanized iron meshes. The isolation of sand grains is done by vibration that is created by unbalancing force at the motor shaft. The required sand size is taken for good mould preparation for good casting.

Personal Information :
Name : Ejaz Ahmad.
Date of Birth : 20/12/1987
Gender : Male.
Marital Status : Unmarried
Nationality : Indian.
Language known :
- English-Good Speaking & Writing
- Hindi- Speaking & Writing
- Urdu-Speaking & Writing

Educational Qualification :
“10th” completed from Islamia High School .Bihar Board with 71.85% First Class in 2002.
“I.Sc” completed from Z.A. Islamia College. Bihar Board with 54.22%second Class in 2004.
“Bachelor of Mechanical Engineer” from H.M.S.IT,Tumkur, Karnataka, with 58.8% in 2011.
(Affliated to visveswaraya technological university Belgaum, Karnataka)

Declaration :-
I hereby declare that the information furnished above is true to the best of my knowledge.
Date : -
Place : - Ejaz Ahmad

[Unregistered]

RESUME :

OBJECTIVE :
To work in tandem with a team in a challenging and competitive environment where I can improve my knowledge, capabilities and put them to use for the development of the organization.

FIELDS OF INTEREST :
- Auto mobile
- Design
- Production
- Thermal

PROJECT WORK COMPLETED :
- Solar Water Purification System.
- Mini Project on Pneumatic Machine Vice

SKILLS :
- Sincerity and Adaptability.
- Comprehensive problem solving techniques.
- Excellent verbal and written communication skills.
- Ability to deal with people diplomatically.
- Willingness to learn team facilitator hard worker.

PROFESSIONAL EXPERIENCE :
- Project Engineer- Uni-Fire System. Oct 2012 to Till date :
(Uni-Fire System, L-1238,1st Floor, Meerut, U.P, is an ISO 9001 company. Uni-Fire System is a fire protection Consultant, undertaking various fire & safety projects, Deals with Hydrant, sprinkler and all types of Fire Equipments & Fire Alarm System)

EDUCATIONAL DETAILS :
Course Institution Board/University Year of
Completion Marks %/ CGPA :
B.E (Mech) Anna University Chennai

PERSONAL DETAILS :
DEGREE : Bachelor of Engineering.
BRANCH : Mechanical Engineering.
NAME : Jibin Varghese Oommen
E-mail ID : jibin013 AT gmail.com
DATE OF BIRTH : 17-09-1990.
AGE : 22
SEX : Male
FATHER'S NAME : M.V.Oommen
MOTHER TONGUE : Malayalam.
LANGUAGES : Read : English, Malayalam and Hindi.
Write : English, Malayalam and Hindi.
Speak : English, Malayalam, Tamil & Hindi

DECLARATION :
I, JIBIN VARGHESE OOMMEN, do hereby confirm that the information given above is true to the best of my knowledge.

Date :
Place : Jibin Varghese Oommen

[Unregistered]

CURRICULUM VITAE :
QA /QC INSPECTOR
MURALI JAYANTH.R
E-mail :muralijayanthr AT yahoo.com
:muralijayanth AT gmail.com

CAREER SNAPSHOT :
More than 3 years of experience in the field of welding, quality control department for Reviewing and preparation of welding procedures, qualification of welding procedures, qualification of welders/welding operators, inspection and NDE of finish welds for general fabrication and steel structures.

EDUCATION QUALIFICATION :
- BE in Mechanical Engineering with 80% from Anna University, Chennai in May 2010.
- HSC with 77.5% from Sacred Heart Higher Secondary School, Trichy in April 2006.
- SSLC with 83% from Sacred Heart Higher Secondary School, Trichy in April 2004.

TECHNICAL QUALIFICATION :
- Certified Welding Inspector Level 2 (CSWIP 3.1) Certificate No : 650319 Valid up to 11 December 2018.

- ASNT Level-II :
- Radiography Testing (RT),
- Ultrasonic Testing (UT),
- Penetrant Testing (PT),
- Magnetic Particle Testing (MT).

COMPUTER KNOWLEDGE :
Operating System : MS Office
Software : AutoCAD 2008

CODE KNOWLEDGE :
ASME SEC II, V, VIII & IX, AWS D1.1.
A)Present Employment
Employer : Cethar Ltd
Position : QC Inspector (Welding,Steel Structures)
Period : Feb 2011 to Present Date
Project :
1.Aryan coal pvt Ltd ( 2x135MW)
2.Meenakshi Energy Ltd ( 2x350MW)
3.Jay Prakash Ltd ( 2x125MW)
4.Vandhana Vidhyut Ltd( 2x135MW)
5.Sks power pvt Ltd ( 2x300MW)
Location : Trichy.

B) Previous Employment
Employer : Tridents Implements Pvt Ltd
Position : QC Inspector (Machining Components)
Period : Aug 2010 to Sep 2011
Project : Agri Farms
Location : Chennai.

RESPONSIBILITIES AND JOB EXPOSURE :
- Reviewing Inspection Test Plan (ITP) for welding and piping and follow-up.
- Reviewing and approval of NDT procedures, specifications and method statements for contractors
- Reviewing and approval of third party NDT Company and personnel.
- Selection of welded joints for RT, PT, MT and UT at pre-fabrication shop and construction site.
- Interpretation of RT films and review of NDE reports.
- Interpretation and witness of Liquid penetrant and magnetic particle tests.
- Maintaining monthly welders performance rate as per NDE reports
- Interpretation of RT films as per ASME 31.3 and Section IX for acceptance criteria
- Inspection of welding procedure qualification tests and Electrode qualification tests.
- Reviewing and approval of WPS with supported PQR documents
- Working as a QA/QC Inspector,
- Conducting welder qualification test according to ASME Sec. IX.
- Well conversant with codes and standards like ASME 31.3, 31.1,ASME Sec.IX, II, ASTM, API, etc.
- Witnessing MT,PT and UT at shop and site .
- Inspection of piping material traceability, Fit-up & weld visual
- Documents reviewing of Welding consumables batch certificates.
- Witnessing welder certificates and identity cards for the welders.
- Monitoring welding consumables log sheet (In Baking , Holding and portable ovens)
- Reviewing Technical Specification for procuring raw material & welding consumable.
- Materials receiving inspection and review of Mill test Certificates.
- Reviewing line history sheet and NDE summary list with RT joints coverage as per fluid category
- Monitoring welder performance on weekly basis and over all project repair rate on monthly basis.
- Reviewing and approval of Test Packages
- Pre-qualification Surveillance inspection for contractor’s sub-contractors.
- Monitoring calibration of welding machines, baking, holding and portable ovens & Testing Equipments (Holiday tester and PWHT Recorder.
- Analyze the defects, identify the root causes and implement the corrective measures for continual improvement.
- Preparation of Quality Assurance Plan (QAP), Shop Weld Plan and Test Plan.
- Preparation of Method statement and Inspection test plan for above ground and under ground piping.
- Preparation of WPS/PQR as per code & client specification & conducting test for the same.
- Inspection and monitoring of different welding processes like SMAW, GMAW, GTAW and SAW.
- Inspection and witness of Holiday test for under ground piping Systems
- Physical inspection of pipes, fittings, flanges & valves as per purchase order & mechanical, chemical properties as per code & specification requirement.
- Witness of Orifice flange internal flush grinding.
- Inspection of pipe spool Alignment, Orientation, Material Code, piping class and Measurement.
- Weld visual inspection of fabricated piping spool in line with isometric and specifications.
- Reviewing PWHT Chart and witnessing Hardness report for higher thickness C.S and Alloy steels.
- Monitoring Pre-Heat, inter-pass temperature and PWHT in line with concerned WPS/PQR.
- Witnessing Positive Material Identification report (PMI) for Alloy and S.S.
- Execution of Hot tapping, hook-up and Tie-in point activities.
- Reviewing Test packages, Line checking with contractor, making punch points and release for testing.
- Witness of hydro, Pneumatic and service Tests.
- Making reports and maintain record of the NDT and Pressure Test.
- Review of third party documents and witnessing the same.
- Prepare Manufacturing Data Report (MDR).
- Monitoring proper usage of weld consumable.
- Co-ordination with NDT activities like RT, PT, MT & Hardness Test.
- Carry out internal cleaning inspection of fabricated spools
- Preparation of weekly and Monthly Quality Reports, maintaining Quality Records and submission of Final QC Dossier.
- Welding inspection of different type of materials like CS, SS, LTCS and LAS.
- Carry out internal cleaning inspection of fabricated spools
- Review of test packages and release for test & witness of test.
- Keeping co-ordination with sub-con & close communication with client.
- Final Loop Clearance and test package acceptance.

PAINTING AND INSPECTION :
- Blasting and Painting Inspection of Structures and column.
- Checking Storage condition of paints, Monitoring whether condition.
- Visual inspection of blasted surface, profile checking by profile gauge
- Checking equipment condition, air quality, paint mixing, paint system identification and paint application.
- Checking calibration certificates for equipments and instruments.
- Inspection of blasting surface preparation, paint system identification, paint application, adhesion test, DFT verification.

PERSONNEL DETAIL :
Sex : Male
Nationality : Indian
Marital Status : Single
Languages Known : English, Tamil and Telugu.
Date of Birth : 09.09.1988
Permanent Address : No 17A, Bishop Road ,Puthur, Trichy -620017. Trichy (Dist), Tamilnadu (state) -INDIA

Place : yours sincerely,
Date :

[Unregistered]

RESUME
Mohammad Minhajuddin Ansari
E-Mail ID : minhaj.mechanical AT gmail.com

OBJECTIVE :
To seek an organization that offers career growth and enhances to achieve goals through persistence and hard work which will help me to explore myself and realize my potential.

Educational Qualification :
Qualification University/Board Month-Year of Completion Percentage :
B.E(Mechanical ) AVIT(VMU),CHENNAI May,2013 85.6%
H.S.C SFS COLLEGE, NAGPUR May ,2009 75%
S.S.L.C Sec. DELHI PUBLIC SCHOOL, GAYA May,2007 87.6%

Key Skills / Certification :
** CADD-CATIA V5
** MICROSOFT OFFICE

Industrial Training :
Organization Training Duration :
BHARAT COKING COAL LMTD., DHANBAD,JHARKHAND 15 days
M.K.ENGINEERS AND TRADERS,DHANBAD,JHARKHAND 20 days

Conferences / Workshops / Industrial visits :
** National conference- “Environmental Science &technologies for Sustainable Development-2011”
** National level technical symposium–“Recent trends in Nano Engineering-2011”,Anna University,chennai
** National Workshop-“ Emerging materials and its applications”-2012”
** Industrial visit-“Autotech industries, Ambattur , Chennai”
** Industrial visit-“Chennai Forge Products Pvt, Ambattur, Chennai”


Papers Presented / Awards / Prizes Won :
** National Integration &Communal Harmony Elocution Competition : 3rd rank(nov,2009)
** Proficiency certificate in the Second year University Examination : 3rd rank(2010-2011)
** Tech quiz (Madras metallurgical society student chapter) : 1st rank(feb,2012)
** Tech make(Madras metallurgical society student chapter) : 2nd rank (feb,2012)
** National Service Scheme Essay Writing Competition : 3rd rank(2012)
** Tech quiz(Madras metallurgical society student chapter) : 3rd rank(aug,2012)
** Tech make(Madras metallurgical society student chapter) : 2nd rank(aug,2012)
** Tech speak(Madras metallurgical society student chapter) : 2ndrank(aug,2012)
** Business plan(Society of Automotive Engineers collegiate club tier-1) : 1st rank(aug,2012)
** Represented college in Business plan (SAE tier-2 Student Convention Event) at SAVEETA ENGINEERING COLLEGE,CHENNAI
** Paper presented on “Biodiesel” and “Alternative sources of energy”,
** VICE-CHAIRPERSON OF SAE STUDENT COLLIGIATE CLUB, AVIT

Industrial Project (Final year) :
“DESIGN OF FIXTURE FOR ROLLER TAPPET BRONZE PRESSING” at “Autotech industries (INDIA) Pvt. Ltd”., Ambattur industrial estate, Chennai-600058

Membership in professional Society :
** SOCIETY OF AUTOMOTIVE ENGINEERS(SAE-INDIA)
** MADRAS METALLURGICAL SOCIETY(MMS)

Soft skills :
** Participated in INFOSYS CAMPUS CONNECT program.
** Participated in SAEINDIA - life long technical program

Extra-curricular activity :
** Participated in the “SHRI ANNA VAIDYA SINGLE WICKET TOURNAMENT” ORGANISED BY S.B.C.C.,SHIVAJI PARK ,MUMBAI(2008-09)
** Participated in "CHEMSPORTS 2012” ORGANISED BY CHENGALPATTU MEDICAL COLLEGE,CHENNAI

Personal Profile :
Nationality : Indian
Father’s Name : Mohammad Alimuddin Ansari
Date of Birth : 25th April 1992
Sex : Male
E-Mail ID : minhaj.mechanical AT gmail.com

I hereby affirm that all the information furnished above is true to the best of my knowledge.
Place : Chennai
Date :
Mohammad Minhajuddin Ansari

[Unregistered]

Will NSH recruit fresher mechanical engineer, now?

[Unregistered]

RESUME :
PRABIN ANANTH.S
mechprabin2 AT gmail.com Mangalam

CAREER OBJECTIVES :
Seeking a challenging job in an organization that provides ample opportunities to learn and contribute constructively.

ACADEMIC QUALIFICATION :
Sl.No COURSE RECORD UNIVERSITY/ BOARD SCHOOL/ COLLEGE YEAR OF PASSING %
1 B.E Mechanical Engineering ANNA UNIVERSITY Narayanaguru college of engineering 2013 7.34 (in CGPA)
2 HSC Maths-Biology STATE BOARD St,Mary’s Higher secondary school 2009 67.34%
3 SSLC STATE BOARD St,Mary’s Higher secondary school 2007 77.4%

IN-PLANT TRAINING :
Attended 3 days training at Visteon Automotive System India Pvt Ltd,Chennai.

MINI PROJECT :
Design and Fabrication of Mini Wood Lathe Machine.

FINAL YEAR PROJECT :
Experimental Investigation of Rubber Seed Oil as an Alternate Fuel in CI Engine.

SOFTWARE SKILLS :
APPLICATION SOFT WARE :MS-office
CAD-MODELLING SOFTWARE :Solid Works , AutoCAD

AREAS OF INTEREST :
Automobile Engineering
Power plant Engineering
Manufacturing

STRENTH :
Self Confidence.
Smart working ability.
Ability to learn and adapt promptly.

ACHIEVEMENTS :
Consistent Academic skills.

PERSONAL PROFILE :
Age and DOB : 21,06-02-1992
Gender : Male
Father’s Name : Swamy Dhas
Mother’s Name : Vasantha
Marital Status : Single
Nationality : Indian
Hobbies : Playing Cricket,Swimming,Listening Music
Languages known : Tamil,English,Malayalam.

DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge and belief.

Place : Mangalam
Date : PRABIN ANANTH.S

[smartsaran97@gmail.com]

I am saravanakumar Graduate BE CIVIL and hav one year field experience. I would like to work in UAE. Can I apply?