oil and gas company Bangalore : piping Lead engineer PDS / PDMS

[Admin]

a leading oil and gas company

Keywords: piping engineer

Designation: piping engineer-lead engineer
Experience: 8 - 13 Years
Location: Bengaluru/Bangalore
Education:
UG - B.Tech/B.E. - Mechanical
PG - Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date: 23 Oct 2008

Job Description
Job Title : Piping Engineer
Position : Lead Engineer
Key Duties &
Responsibility
- Knowledge of
1. Equipment layout
2. Safety & Escape route layout
3. Piping layout
4. Piping support layout
5. Bill of materials
6. Piping material specification & value material specification.
- Knowledge to analyze the Stress Analysis Reports to improve the system
design by proper layout and support.
- Proficient on various codes & standards (ANSI, API, NACE, NFPA, IBR etc,)
- Knowledge of various vendor packages, review of vendor drawings and
documents, knowledge of safety engineering.
- Lead the team of engineers, designers/draftsman, modelers and provide
technical support and guidance.
- Ability to interact with various disciplines, vendors & clients.
- Ability to monitor the progress of project work with respect to schedule, manhours
spent keeping in view the quality aspect.
Software Knowledge on:
- CEASER-II
- PDS / PDMS
- Dynamic Stress Analysis Tools
Education &
Job
Experience
- Post Graduate / Graduate Engineers with minimum 8 years experience in
Basic Design and Detail Engineering in the respective engineering discipline.
- Candidate with experience in the Oil & Gas / Hydrocarbon sector with offshore
engineering background.
Location-Bangalore

Desired Candidate Profile
Job Title : Piping Engineer
Position : Lead Engineer
Key Duties &
Responsibility
- Knowledge of
1. Equipment layout
2. Safety & Escape route layout
3. Piping layout
4. Piping support layout
5. Bill of materials
6. Piping material specification & value material specification.
- Knowledge to analyze the Stress Analysis Reports to improve the system
design by proper layout and support.
- Proficient on various codes & standards (ANSI, API, NACE, NFPA, IBR etc,)
- Knowledge of various vendor packages, review of vendor drawings and
documents, knowledge of safety engineering.
- Lead the team of engineers, designers/draftsman, modelers and provide
technical support and guidance.
- Ability to interact with various disciplines, vendors & clients.
- Ability to monitor the progress of project work with respect to schedule, manhours
spent keeping in view the quality aspect.
Software Knowledge on:
- CEASER-II
- PDS / PDMS
- Dynamic Stress Analysis Tools
Education &
Job
Experience
- Post Graduate / Graduate Engineers with minimum 8 years experience in
Basic Design and Detail Engineering in the respective engineering discipline.
- Candidate with experience in the Oil & Gas / Hydrocarbon sector with offshore
engineering background.
Location-Bangalore

Company Profile
a leading oil and gas company

Executive Name: ipshita

Address:
Not Mentioned

Email Address: ipshita@busisol.net

Telephone: 08041538235

[Guest]

Dear sir
RESUME
Name : K. KRANTHI KUMAR
Email : kranthi.9k AT gmail.com
OBJECTIVE :
A suitable position in a professionally managed organization to improve my knowledge and skills through hard work, dedication and sincerity towards my job and to execute the responsibilities entrusted to me by the organization to the fullest of my abilities and derives job satisfaction.
BRIEF WORK PROFILE :
Sir/ Madam,
I would like to submit my candidature for a challenging position in an organization, which will explore my potential to the fullest for its services.
I work hard and firmly believe in planning and resourceful time management. I have a passion for learning new concepts and open to new ideas. I can work individually as well as in a team.
My Educational and Professional experience has given me in-depth knowledge into the mechanical equipments and environment technology. I have over 3.7 years of combined professional and design experience in material handling systems, water and waste water treatment plants.
EXPERTISE /SKILLS : ( Mechanical Engineer having 3.7years exp. )
- Designing and detailed engineering of Piping for water & waste water treatment plants.
- Designing and detailed engineering of R.O plants, Softners & Pre Filtration.
- Errection and execution engineer for water and waste water treatment plants
- Mechanical equipments for Water treatment plants designing, Fabrication and Inspection.
- Cost estimation and evaluation of equipments/ treatment technologies for implementation of the WTP project.
- Project tendering and cost estimation for WTP
- AutoCAD drafting and designing the mechanical equipments
- Project commissioning, trouble shooting and performance evaluation of the system.
- Managed small, medium and large project teams of diverse professionals and technicians working under difficult budget and time constraints.
- Direct interaction with customers and clear the doubts about project.
- Ability to work independently and to organize work on multiple projects.
- Creative and enthusiastic in new projects.
- Comprehensive problem solving skills.
WORK EXPERIENCE : June 2007 TO Till Date.
- Design Engineer - (May 15th 2009 – Till date)
Organization : M/s. Ultra Water Solutions & Services Pvt. Ltd, Hyderabad
- Designing and detailed engineering of Piping for water and waste water treatment plants.
- Design of R.O plants, Water Softners, Prefiltration, Ultra filtration & Dual media filters.
- Erection & execution of Sewage Treatment plants and Effluent Treatment plants.
- Autocad design and detailed engineering of waste water treatment plants.
- Fabrication Inspection Engineer

Major customers handled :
- Nuchem Ltd – STP
- Jyothi Fabrica in Doddaballapur near Bangalore- UF & ETP
- Marata Cements – STP
- Aplas Capco. – STP
- Agrigold group - R.O plants
- L S G Sky Chess Rajiv Gandhi International Airport - R.O plants etc.,
- Jr. Engineer- Designs (Feb19th 2008 – April 30th 2009 )
Organization : M/s. Indwa Technologies Pvt. Ltd, Hyderabad
- Designing, cost estimating and tendering of Reverse Osmosis plants.,Water Softners, Sand Filtration, Ultra filtration and have an experience in ROSA, Agro Analyser and Wincaps Softwares.
- Preparation of detailed BOQ, pipeline drawings, Isometric views.
- Design and detailed drawings of piping for several water and sewage treatment plants for various clients of M/s Indwa Technologies Pvt. Ltd.
- Erection and Execution Engineer for sewage treatment plants and Effluent treatment plants.
- Autocad design and detailed engineering of water and wastewater treatment plants.
- Total Fabrication inspection engineer and Material handling engineer.
Major customers handled :
- A P I I C Gundlapochampally- CW-WTP
- Naturol Bio Energy- ETP
- N I T Warangal- STP
- Dr. Reddy’s Laboratories Ltd.- Biologics Development Center-STP
- Nuclear Fuel Complex (NFC) – Pre Filtration
- Engineer Projects. (June 2007 – Dec 2007)
Organization : M/s. Hantek Technologies Pvt. Ltd, Bangalore.
- Designing of Belt Conveyers.
- Design and detailed engineering of several material handling plants for various clients of M/s Hantek Technologies Pvt. Ltd.
- Site Engineer for manufacturing of material handling systems.
MECHANICAL SOFTWARE’S :
Auto CAD, Ansys, Unigraphics, & Wincaps and Rosa
EDUCATIONAL QUALIFICATIONS :
Qualification College / University Duration/Year of passing
B.Tech (Mechanical) NBKR Institute of science and Technology, vidyanagar, Nellore (DT).
2003-2007
Intermediate Govt.Jr College, Anantapur.
2000-2002
SSC Govt. high school, Anantapur
2000

[Guest]

M Vineeth
Email : ajuvineeth AT gmail.com / ajuvineeth_m AT rediffmail.com /
OBJECTIVE
To take up a challenging position with knowledge and experience in your Esteemed Organization and move along with latest Technology there by proving to be a positive sway in the advancement of the Organization.
PROFESSIONAL SYNOPSIS
- A dynamic professional with over 9 years of rich Overseas & Domestic experience in Project Management, Design Engineering, Erection & Commissioning, construction, Fabrication and Man Management of GAS plants, Refineries & Off Shore Projects
- Presently associated with Gulf Consolidated Contractors Company (GCC), Saudi Arabia as Commissioning Engineer
- A project planner with expertise in planning, executing and spearheading various design & development, erection, commissioning & fabrication projects in compliance to quality standards.
- Experienced in Equipment erection like Turbine, Generator, Vessels, Valves, Heavy duty Pumps, Cooling towers, Heat exchangers Etc
- Proficient in managing design & development related operations involving resource planning, in-process inspection, team building and co-ordination with internal / external departments.
- Adept in managing erection & commissioning and maintenance activities involving resource planning, in-process inspection, team building and co-ordination with Internal / External Departments.
- Honed skills in fabrication process of converting raw material into finished steel building system components.
- An effective communicator with excellent relationship building & interpersonal skills. Strong analytical, problem solving & organizational abilities. Possess a flexible & detail oriented attitude.
- Awareness of safety standards& regulations in Gas Plants & refineries.
CORE COMPETENCIES
- Project Planning & Management
o Managing overall operations for executing projects related to hydraulics designing involving scoping, initiating and resource mobilization within cost & time parameters.
o Monitoring / tracking project operations with respect to budgeted cost, demand forecasts, time over-runs to ensure timely execution of projects.
- Design Engineering
o Developing the conceptual design of new components entailing drawings & specification study, quotation enquiry study & finalization, vendor selection & finalization, schedule for development, first sample approval, tool modification and final product approval.
o Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals.
o Designing the product to meet customer requirement & translating the design model using various tools.
o Reviewing the engineering / design changes & resolving quality related problems associated with design.
o Final checking and release of engineering drawings for the prototype and subsequently for production.
- Erection & Commissioning
o Anchoring on-site erection & commissioning of various structures while ensuring effective resource utilisation to maximise the output.
o Installation and commissioning of various equipments as well as conducting tests & inspections to ensure operational effectiveness.
o Reviewing engineering drawings, technical specifications, cost estimates for installation & commission of the equipment; reviewing & analyzing contractor's change order proposals & submittals.
- Fabrication Operations
o Studying drawings, plans or patterns of structures to be made as per client’s requirements.
o Marking out shapes and other measurements on the metal.
o Pulling, bending, forming sheet metal plates and joining metal parts together by bolting or welding.
o Pressing, rolling, welding and cutting steel along with lowering of pipes & platforms.
- Man Management
o Directing, leading and motivating workforce; imparting continuous on job training for accomplishing greater operational effectiveness/ efficiency.
o Working on succession planning of the workforce, rendering technical guidance to the staff, shift management activities, appraising the member’s performance & providing feedback.
ORGANISATIONAL EXPERIENCE
Since Dec’10 with GCC (Gulf Consolidated Contractors company, EPCC Contractor), Saudi Arabia, as a COMMISSIONING ENGINEER (Mechanical/Piping)
Projects Handled
v Title : Jubail Export Refinary Project (Package 8 - including cock transfer belt
Conveyor system 31km).
Client : SATORP (Saudi Aramco & Total Refining Petrochemicals)
Main Contract : GCC (EPCC), Saudi Arabia
Sub Contractors : Technoconsult, Venenzuela
Tenova, Italy
Kentz, Saudi Arabia
SISCO, Saudi Arabia
Gulf Strategic Partners
Role : Involved in:
- Preparation commissioning & start up sequence procedure.
- Commissioning of Cock transfer belt conveyor system (31 Km)
- Preparation of pre-commissioning & commissioning execution plan
- Progress monitoring & budget controlling.
- Preparation of pre-commissioning & commissioning special spare part tools
- Preparation of commissioning dossiers and commissioning spare part list.
- Preparation of pre-commissioning, commissioning, start up and handing over procedures
- Board discussion with the clients regarding the material requirement
- Planning pre-commissioning & commissioning execution of mechanical equipments & piping systems.
- Test pack preparation
- To develop the Commissioning philosophy, strategy and implementation, execution plans which are to be in line or consistent with the project execution strategy and plans.
- Supervise, commissioning of project systems, assist with compilation, sign-off and handover of certification packs to platform operations team.
- To lead and manage the execution of all commissioning activities.
- To review design packages and ensure that the existing commissioning procedures, manuals and criteria are applicable.
- Provide the project team with an accurate assessment of the commissioning requirements and status to ensure subsequent decisions are well founded.
- Ensure necessary HSE reviews are undertaken and identified actions completed.
- Ensure all commissioning related works for the facilities are in accordance with project specifications and making sure they are maintained in order to safeguard technical integrity.
- Participate in technical reviews for QA/QC and engineering works.
- Ensure all necessary permits, licenses and other compliance requirements are in place prior to commencement of any commissioning activities.
- Endorse discipline specific formal Handover documents from contractors, suppliers at pre-commissioning completion stage confirming their acceptability.
Jul’09 – Jun’10 with Punjlloyd Ltd (main EPC contract), Ruwais, Abu Dhabi as a SR.PIPING/PRE-COMMISSIONING ENGINEER.
Projects Handled
v Title : Borouge-2 Utility Offsite & External Interconnections (UOE)
Client : Abu Dhabi Polymers Company Ltd. (Borouge-2)(ADNOC)
Main Contract : Technicas Reunidas
Company Profile
The Group, with a turnover of US $2 billion, comprises PunjLloyd headquartered in India, Sembawang Engineers & Constructors in Singapore, and Simon Carves in the United Kingdom along with their respective subsidiaries. A strong multinational and multicultural workforce of over 15,000 employees strives to attain the group's vision of being amongst the top five EPC companies in the segments and markets it serves by2012.Punj Lloyd Limited is a transnational company specialising in the energy and infrastructure sectors. Our operations spread across the Middle East, Africa, the Caspian, Asia Pacific and South Asia. As a reflection of international quality standards, construction and project management techniques, Punj Lloyd holds ISO 9001 :2000, ISO 14001:1996 and OHSAS 18001:1999 certifications.
Role : Involved in:
- Varification of plant piping drawings.
- Site co-ordination, progress monitoring & controlling budjet
- Board discussion with the clients regarding the material requirement
- Preparation & maintenance of various reports like isometric drawing, as built drawing, P&ID’s & Hydro testing preparation.
- Planning pre-commissioning & commissioning execution of mechanical equipments & piping systems.
- Test pack preparation.
Review mechanical completion packages. Prepare pre-commissioning and commissioning schedules as per system priority based on commissioning matrix
- Planning & executing of Hydro testing, pneumatic testing & service test by using pressure test chart & temperature test chart
- Pre- Commissioning activities like flushing, cardboard blasting, air blowing & pre-startup etc
- Performing combined line walk, Punching & Punch list preparation with the client
- Performing meeting with the client for the effective & on time completion of work
- Manpower management.
- Coordinating with client/contractor for job requirement & effective completion.
- Evaluating progress of work at site with regards to planned jobs, preparing DPR, etc.
Dec’06 – Jun’09 with Almeer Technical Services Co. W.L.L (EPC Company), Kuwait as Sr. Piping Engineer (KOC approved)
Projects Handled
v Title : Chemical Injection, Corrosion and Scale Monitoring Packages for SEK GC’s (14 Nos.)
Client : Kuwait Oil Company (KOC)
PMC : AMEC (American Engineering Consultants)
Scope : The project was initiated for installation and commissioning of 115 Nos chemical injection
skids including around 2400 Tie-ins in process piping (600 Nos of Hot tapping), around 60 kms of chemical transfer piping networks and piping modification.
Role : Involved in:
- Rendering assistance for pre-engineering survey, fabrication and hook-up of various pipelines.
- Preparation & maintenance of various reports like isometric drawing, as built drawing, NDT reports, Hydro testing preparation.
- Removal of the existing lines & erection of new lines for various equipment and processes, valve replacement.
- Fabrication of piping spool on shop floor and installation in live lines.
- Installation of access fittings on live lines.
- Coordination with procurement for effective and on time availability of materials
- Hydro testing and commissioning of CS, RTRP piping.
- Manpower management.
- Evaluating progress of work at site with regards to planned jobs, preparing DPR, etc.
v Title : Moderniztion Of Obsolete Instrumentation Project (MOIP PHASE-1)
Client : Kuwait National Petroleum Co. (KNPC KSC)
Consultant : NAMA Mott Mac Donald
Role : Involved in:
- Rendering assistance for fabrication and hook-up of various pipelines.
- Valve replacement and erection of new lines
- Activities inside the control room
- Panel fabrication & erection inside the control room
- Manpower management & preparation of DPR
- Material clearance and issue as per standard
- Shutdown construction activities
Feb’04 – Jun’06 with Supreme Offshore Constructions & Technical Services Limited, Mumbai (India) as Piping Engineer
Projects Handled
v Title : B&S – NH4 Well Platform Project – II
Client : National Petroleum Construction Company (An Abu Dhabi based EPC Company)
Scope : The project involved Launcher/Receiver, Vessel and related Water Injection/Well Fluid
facility for 4 Platforms in, Neelam & Heera Field under the contract of National Petroleum Construction Company – an Abu Dhabi based EPC Company. The project was installation of new 4 well platforms including laying of Sub-Sea Pipelines & Sub Sea Cables, modification on existing platforms and other miscellaneous works in Heera and Bassein Field of ONGC. Installation of Wells & Pipe laying by M/s. NPCC and Topside modification by M/s. SOCTSL.
Role : Involved in:
- Evaluation of the project bid & packages.
- Removal of the existing lines & erection of new lines for various equipment and processes, valve replacement
- Preparation of query to vendors.
- Document preparation against bid packages.
- Material evaluation as per MTO’s & BOM.
- Verification of drawings as per the survey.
- Material identification of pipes, fittings, valves, etc.
- Installation, hookup and pre-commissioning of piping systems in manned (process complex) and unmanned platforms.
- Hydro testing and commissioning of piping.
- Hydrocarbon and gas platforms shutdown jobs.
- Manpower management.
- Evaluating progress of work at site with regards to planned jobs, preparing DPR, etc.
v Title : Revamping Project at Mumbai High South & North Field
v Title : Flow Arms Project for O.N.G.C Platform
Client : Oil and Natural Gas Corporation Limited – India, British Gas (India) Limited and Larson
Toubro Limited
Nov’02 – Jan’04 with Abrol Engineering Co. Private Limited, Kapurthala (Punjab) as Mechanical Engineer
Projects Handled
v Title : Design & development of Sheet Metal Fabrication of LHB SG Panels for both
Non-AC & AC Coaches (A New Project of RCF, Kapurthala, Punjab)
Client : Rail Coach Factory, Kapurthala
v Title : Design and Development of the Model & Sheet Metal Fabrication for Distribution
Box
Client : Rail Coach Factory, Kapurthala
QUALIFICATIONS
Master’S Program in CAD/CAM/CAE & Mould Designing from Central Institute of Plastic Engineering
& Technology (CIPET), Hyderabad.
2002 Diploma in Mechanical Engineering (DME) from Kerala State Technical Education in Seethi Sahib
Memorial Polytechnic, Tirur
IT SKILLS
Operating System : MS DOS, Windows 95 / 98 /2000 / XP / VISTA
Languages : Cobol
Designing Packages : PRO-E (Wildfire), Inventor (V6), CATIA (V5), I-
DEAS (Master Series 7), Master Cam, MSP,
Pro Mould, AUTOCAD