Vadodara/Baroda : Instrument PDS Designer : Shivam Consulltants

[Admin]

A Leading MNC project consultants –Client of Shivamm Consulltants : Vadodara/Baroda : Instrument PDS Designer (Baroda)
A Leading MNC project consultants –Client of Shivamm Consulltants
http://www.shivamc.com

Keywords: Hands on exp on PDS with AutoCAD Microstation Hands on exp on PLC DCS designing

Designation: Instrument PDS Designer (Baroda)
Experience: 10 - 12 Years
Location: Vadodara/Baroda
Compensation:
Rupees 4,00,000 - 8,00,000
(send c.v. as MS word attachment with present & expected salary details with joining time required by you)
Education:
UG - Any Graduate - Any Specialization;Graduation Not Required
PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date: 01 Oct 2008

Job Description
Modeling of Instrument Cable Tray Routine Layout, Preparation of Inst. Location Plan / Layout, JB Grouping / Cable Schedule, Installation hook-ups,MTO,Instrument Loop Diagrams, Control system Configuration Diagram,Functional Logic Diagrams.

Desired Candidate Profile
Dip.(Instrumentation/ Electronics)/ITI with min 10-12 yrs exp. in the field of designing with consultancy firm. Hands on exp. on PDS with AutoCAD & Microstation.Hands on exp. on PLC & DCS designing.

Company Profile
Client of Shivamm Consulltants -A Leading MNC project consultants known for Petrochemicals,Pharma and Oil & Gas projects & known for it's expertise in these projects in India & Abroad.

Executive Name: Pradip C.Kumar

Address:
Not Mentioned

Email Address: getjobs@shivamc.com

Telephone: Not Mentioned

Reference ID:
jssk/ Instrument PDS Designer (Baroda)

[Guest-IJT]

Name : Safa Fathima
Email : safasmails AT rediffmail.com
Designation / Skillset : Instrument Engineer

Resume :

CURRICULUM VITAE
OBJECTIVE :
Seeking a responsible position in an esteemed organization and enhance my technical skills and knowledge for the betterment of the organisation, and to work towards achieving the goal of the organization. I am confident to learn and work on new technologies and want to give an exemplary display of my abilities by keeping up to the expectations.
ACADEMIC QUALIFICATIONS
Course Institution Board/University marks
BE in Electronics and Instrumentation Engineering
(2007-2011) Noorul Islam College Of Engineering,
Kumaracoil Anna University,Tirunelveli 74% till S7
HSE
(2007) Government Higher secondary School,
Cotton hill Board of higher Secondary examination, Kerala
86.4%
SSLC
(2005) Holy Angels’ Convent High school,
Trivandrum State Board of Examination, Kerala.
88%
TRAINING PROGRAMMES
Implant training : The implant training in HLL Lifecare was done to enrich our knowledge in the field of Process control in industrial sector.
- Others : Training in ‘Fundamentals of Distributed control systems’ by the internationally acclaimed DCS providers, Yokogawa.
- Training in PLC, SCADA.
ACHIEVEMENTS
- Second prize in Physics quiz in high school.
- Prizes won in versification,elocution,essay writing etc at inter-school level
- Participated in TCS-IT quiz
- Participated in Intel Science fair
- Participated in National level symposiums like Eclat’09,Techwars’10
- Second prize in quiz competition conducted by Civil engineering in 2010
STRENGTHS
- Optimistic
- Hard working
- Self confident
- Good communication and comprehensive skills
- Deterministic
HOBBIES : Cooking, Reading ,Drawing
TECHNICAL SKILLS :
MS office, C,C++,DCS,PLC
ELECTIVE :
1. DCS
2. Process control
3. Digital Signal Processing
4. Computer Networks
5. Computer Control of Process
DECLARATION :
I hereby declare that the above given contents are true to my knowledge and belief.
Place :Kumaracoil Safa fathima
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4151870
Date & Time : 19th May 2011 1:40 PM (UTC)
IP Address : 59.93.41.36
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.6; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; .NET4.0C; InfoPath.2)
Predicted Country : India

[Guest]

PRAKASH P.R
e-mail : prakash.be_eie AT ymail.com

OBJECTIVE

To work efficiently and effectively,as well as to build my career in a prestigious organization
like yours that will provide me exciting opportunities to learn more and help me to explore myself
fully and realize my potential and to become a successful professional.
WORK EXPERIENCE
Working as a Contract with Honeywell Process Solutions, Pune from June15 to till date.
Project Name : B3 (EU3)
End User : Bourge
Location : Abu Dhabi
Platform : EPKS R400 DCS
Duration : 15 June 2011 to 31 July 2011
Responsibilities :
- Quality checking for controllers
- Making reports
- Control module Alignment
- Parameter connection for Control modules
Project Name : HADEED MODULE
End User : Hadeed
Location : Saudi Arabia
Platform : EPKS R400 DCS
Duration : 15 June 2011 to 31 July 2011.
Project Description : Hadeed intends to revamp the existing HPM controller to new Experion . C300 controllers to take the advantage of current technology.
Responsibilities :
- Quality checking for controllers
- Making reports
- Control module Alignment
- Parameter connection for Control modules
Exposure in handling automation projects at Cybomac Automation, Chennai
from October 2010 to April 2011.
Project Name : Motorized Weigh Batching using PLC & Field Bus
End User : Bajaj Dhatu Udyog, Nagpur.
PLC : Allen Bradley SLC 5/03
Duration : 3 Months
Project Name : High Resolution Component Detection System
End User : Rane TRW Occupant Restraints LTD, Chengalpett.
PLC : Allen Bradley MicroLogix 1500
Duration : 3 Months.
TECHNICAL SKILLS
Automation Course (PLC, SCADA and DCS) Certified from HONEYWELL AUTOMATION INDIA Ltd., PUNE.
- In this course I learned about the role of major hardware and software components and data processing techniques of ML200R PLC using Soft Master software tool.
- Gained sufficient knowledge in Honeywell Experion PKS DCS System.
TRAINING
- Had an On Site Training in RASHTRIYA CHEMICAL FERTILIZERS, MUMBAI.
- Course Objective
o Process plant overview.
o DCS & PLC installation in RCF.
- Honeywell ExperionPKS
o Honeywell Experion Architecture overview.
o Gained knowledge about closed loop Implementation.
- Yokogawa CS3000 DCS
o Gained knowledge about CS3000 closed loop Implementation.
- Emerson Delta V DCS
o Gained knowledge about Closed loop Implementation of Delta V.
EDUCATIONAL QUALIFICATION
Examination
Passed Institution Board/University Year
of Passing
B.E(EIE) Noorul Islam College of Engineering, Nagercoil Anna University, Chennai 2010
H.S.C Govt : Higher Secondary School, Kamaleshwaram, Trivandrum State Board, Kerala 2006
S.S.L.C Govt: Model Boys Higher Secondary School, Trivandrum State Board, Kerala 2004

[ramesh.parmar63@gmail.com]

RAMESH L. PARMAR
Email id : rameshlparmar AT yahoo.co.in & ramesh.parmar63 AT gmail.com
OBJECTIVES
Highly motivated self starter, seeking a career opportunity as a PIPING DESIGNER, were I may utilize my knowledge, skills and abilities acquired through education and work experience. I have lot of interest to learn new things in Engineering Design and further my work efficiency. I am a team player and always believe in team work and synergy in work place. I will support the Team Leader in meeting tight time schedule and be flexible.
PROFILE PIPING DESIGNER
- Total Experience of 7.5+ years.
- Area of Experience in Oil, Gas & Petrochemical Refineries Projects and Power, Process & Chemicals Plant and Mechanical Industries.
PRESENT EMPLOYER :-
(September-2010 To Till Date)
- Company Name : TATA Chemicals Private Limited, Mithapur,(Gujarat).
: (M/S. Alpha Projects Services Pvt. Ltd.)
Position : Piping Designer
- Preparation of Piping General Arrangement Drawings & Piping Routing as per P&ID.
- Experience in Piping Modeling and Isometric Extraction.
- Experience in 3D Modeling of Piping with Cad Worx Pipe & PDMS.
- Preparation of Rack Piping, Pump Piping, Heat Exchanger Piping etc, Routing on Cad Worx.
- Clash Verification with Structural and Civil Models.
- Experience in As Built Isometric drawings and Isometric Checking.
- Experience in Drawing Manager and ISO Generation and Bulk MTO Generation.
- Preparation & Modification of Equipment & Piping Layout, Overall Piping Layout.
- Preparation of GAD to Isometric Drawing with Bill of Materials.
- Experiences in the field of Piping Layout, /Supporting, Materials or Specifications generation. Interacting with other engineering disciplines.
- Preparation of Design & Detailing like Piping, Equipment & Support Drawings.
PREVIOUS EMPLOYER :-
(January-2009 To September-2010)
- Company Name : Satnam Global Infraprojects Private Limited, Baroda, (Gujarat).
: (IOCL - Petrocamical & Refinery Project Baroda.)
- Position : Piping Designer
- Preparation of Isometric Drawings with Bill of material from piping GAD.
- Preparation of Tendering and Bulk Material Take off (MTO) from P&I D's and Equipment Layouts.
- Piping material Take-Off,
- Preparation of Tank farm Area, Overall Plot Plan Layout,
- Designing for Piping Layout/Pipe rack Layout,
- Design and development of Equipment Layouts.
- Design and Development of Piping Layouts.
- Extraction of Isometric, output in G.A.working with Cad Works Plant Professional.
- Line list preparation.
- Equipment and Piping layout.
- Piping GA, ISOMETRIC, Plot Plan, P&ID Drawings
- Rack Piping, Exchanger piping, and Pump Piping.
- Preparation of Pipe rack and Tank Farm Piping.
- Preparation of Valve Material Specification,
- Preparation of Piping Material Specification,
- Familiar with Codes and standards like ASME ASTM, ANSI.API.B.S etc.
- Preparation & modifications of Equipment drawing like that pressure vessel, Heat exchanger & storage tank.

(February 2007 To January-2009 )
- Company Name : Reliance Engineering Associates Pvt. Ltd, Jamnagar (Gujarat).
: (M/S. Sinclus Engineering & Consultancy Services.)
- Position : Piping Designer
- Preparation of IBR Piping Design Package, Hydro test Package, & As Built Package, for Submit- ion to the Boiler Authorities for necessary approval.
- Experience in 2D Department which comprises of drafting, checking & Modification of Plot- Plan, Equipment Lay-Out, G.A. drawing etc.
- Prepared & Checking of Drawing Index, Pipe Wall Thickness, Piping data, Design Pressure, Temperature, Hydro tests Pressure against (LDT).
- I was actively involved in resolving site queries.
- Making schedule, planning & monitoring progress of piping job.
- I have Understanding of Plot-plan, Piping & Equipment Lay-Out, and P & ID Drawing & Fabrication Detail Drawing etc.
- I have understanding of ASME 31.3 (Process Piping), ASME 31.1(Power Piping) & API RP520 Design and Installation of Pressure Relieving Systems in Refineries Code & Standard.
- Expertise Drafting Software, Micro-station SE & J 7.1, Autocad-2006, 2007.
- All PCO change is incorporated in P & ID for Coker, MTF and RTF Areas.
- Planning and give solution related design and drawing.
- Updating and Correction as per As-Built Drawing using Micro station.
- DCN and PCO updating and Corrections.
- All Process and Utility P&IDs for Crude Train 1 and Train 2 Complexes.
- I have Undergone official trailing for Micro-station and other Technical Software.
(May-2004 To December-2006)
- Company Name : ESSAR PROJECT PVT. LTD: - (VADINAR), Jamnagar (Gujarat).
: (M/S S.K. Construction)
- Position : Piping Designer / Piping Draughtsman
- Preparation of Isometric Sketch & As-Built Drawing.
- Preparation of G.A. to Isometric Drawing.
- I have Understanding of Plot Plan, Equipment layout, P& ID, Pipe-rack Layout etc.
- I was involved in resolving for site queries.
- I have Prepared Foundation Lay-Out, As built drawing & Piping Isometric Drawing with Bill of Materials.
- I have Prepared Fabrication Detailed Drawing for Structure, Pipe Bridge, Shed, Equipment, Pipe rack,
- I have worked in CDU-VDU, DHDS Unit, & Tank Area for Essar Project Ltd. (Vadinar) in Jamnagar.
(Oct-2003 to May 2004)
- Company Name : APPLE INTERNATIONAL ENGG. PVT.LTD,Jamnagar (Gujarat)
- Position : Draughtsman –Mechanical
- Mechanical Design Works.
- Preparation of 2D as well as 3D drawing of Miscellaneous Machine parts in Auto CAD.
- Good exposure in 2D and 3D environment of Auto Cad.
TECHNICAL QUALIFICATION :-

Diploma in Mechanical Engineering (D.M.E.) T.E.B. (Technical Edu. Board)
Oct-2006 77% (Govt. Poly. Jamnagar)
Draughtsman Mechanical (G. C. V. T. Technical Edu. Board Gandhinagar) July-2003
74% (I. T. I. Jamnagar)
AMIE Institutes of Engineering Section-A Completed
- ACADEMIC QUALIFICATION :-
March – 2000 S.S.C 70%
(Guj Secondary edu. Board Gandhinagar)
March – 2002 H.S.C 62%
(Guj Higher Secondary edu. Board Gandhinagar)
COMPUTER KNOWLEDGES
- PDMS. (3D Modeling).
- CAD -Worxpipe-8.1(3D Modeling & Isometric Extract, etc.)
- PDS. (3D Modeling & Isometric Extract)
- Micro- station SE, and “J”
- Auto CAD -2008, 2011(2D & 3D Drawing).
- M.S. Office.
PROJECT WORK :-
I have prepared a Project of working modal of PROTABLE TOOL HANDAL TROLLY of Diploma in Mechanical Engg.
- INTERESTS :-
- 3D modeling & designing on latest software of mechanical field.
- Painting, Sketching & Reading.
Qualification : DIPLOMA IN MECHANICAL ENGINEERING – 2006 With 77%(Distinction)
Institution : Govt. Polytechnic Jamnagar, Gujarat
Qualification : I.T.I. IN DRAUGHTSMAN MECHANICAL- 2003 With 74%(Distinction)

Institution : Govt. Industrial Training Institute Jamnagar

[G.Iyyappan]

RESUME
IYYAPPAN.G
e-mail : iyyappa_gopal AT yahoo.co.in
: iyyappa.gopal13 AT gmail.com
Objective

Seeking a position to utilize my skills and abilities in the firm that offers professional growth while being resourceful, innovative and flexible, and to excel as a successful professional in a dynamic organization that would require novel ideas and allow me to develop and apply my skills and knowledge, while contributing to organizational goals.
Academic Qualification
B.E ELECTRICAL AND ELECTRONICS ENGINEERING.

Software Exposure
Operating Systems : Windows XP.
Languages : C, C++
Software Packages : PDS, Microstation V8, AutoCAD,
PC Schematic Automation.

Academic Record
U.G Percentage secured Institution

2010 66% P.S.R ENGG.COLLEGE.,
SIVAKASI.

HSC Percentage secured Institution
2006 65% I.C.I.BOYS.HR.SEC.SCHOOL,
TENKASI.

SSLC Percentage secured Institution

2004 83% I.C.I.BOYS.HR.SEC.SCHOOL,
TENKASI.
Certifications
- PDS (Plan Design System) & Microstation V8 at MECH-CI CADD in Chennai.
- Diploma in Electrical CADD (AutoCAD and PC Schematic Automation) at CADD Centre.
Experience
- Worked as a Electrical Engineer at Sri Saravana Electrical
Engineers & Contractors From 15.05.2010 to 28.02.2011.
Area Of Interest
- Transmission and Distribution.
- Protection and Switchgear.
Project
Title :
DESIGN AND IMPLEMENTATION OF SINGLE PHASE FULL BRIDGE INVERTER.
Description :
In this project a Single Phase Full Bridge Inverter is designed with MOSFET Switches. The magnitude of the output voltage is controlled by PWM technique.

[Guest]

CURRICULUM VITAE
ANKIT MAHESHWARI
E-mail :aankit1988pinto AT gmail.com

OBJECTIVE
Scale new heights of excellence in professional career by setting imprints of success through highest
level of dedication and determination and this is possible only when I am associated with a progressive
and dynamic organization which can provide me a rewarding career opportunity and strong platform
to exercise my technical , analytical and leadership skills to achieve organizational goals.

TECHNICAL QUALIFICATION
- B. Tech. in ELETRONICS INTRUMENTATION & CONTROL Engineering from GOVT. ENGINEERING COLLEGE, AJMER affiliated to Rajasthan Technical University in 2011 with 65.80%.
- DIPLOMA in ELECTRICAL ENGINEERING from GOVT. POLYTECHNIC COLLEGE, AJMER in 2008 with 64.55%.
EDUCATIONCAL QUALIFICATION
- Sr. Secondary with science & maths from Central Board Secondary Education ,AJMER in 2005
- Secondary from Board of Secondary Education Rajasthan in 2003.

SOFTWARE SKILLS
- PLC & SCADA COURSE
PLC ( Allen breadly)
SCADA (Wonderware) .
- Operating System : Win 2000, Win XP, Win Vista
- Applications : MS Office, C language
PRACTICAL TRAINING
Sach Electro Mech Pvt. Ltd. Over the CAIRN ENERGY INDIA PTY LTD., BADMER (FROM 15 MAY TO 25 JUNE 2010) For all the activity in MANGALA PROJECT (CAIRN ENERGY) specially in PCS(PROCESS CONTROL SYSTEM)
NORTHERN WESTERN RAILWAY, AJMER(FROM 21 MAY TO 17 JUNE)
PROJECT
- : PLC BASED TEMPERATURE AND LEVEL CONTROLLER
IN GOVT. ENGG. COLLEGE, AJMER
- ALARM INDICATOR CIRCUIT for 24 days in Polytechnic college, Ajmer
- : DIGITAL SPEEDOMETER for 20 days in Govt .Engg.collegeAjmer

STRENGTH :
I will make effort to win the trust of management by using my qualities. Every time I inspire and creates a positive approach in me.

[DWIJIN]

CURRICULAM VITAE
DWIJIN.S.K
Email - dj_monu02 AT yahoo.co.in
PROFFESSIONAL SUMMARY
OBJECTIVE To get enrolled in an organization, looking forward to encourage the growth and efficiency, by providing an opportunity to effectively apply and improvise my skills for the betterment of the organization and myself.
PERSONALITY A creative, initiative driven, quick learner and a dedicated team player with excellent personality and very good communication, interpersonal, analytical, problem solving, presentation, coordination, organizational.
Contact Address
26/ B, S.K.NIWAS, VAYALIL NAGAR
T.K.M.C. P.O., KARICAODE,
KOLLAM – 691005
KERALA.
EDUCATION
I.T.I DIPLOMA IN FITTER
(Approved by State Government of India) March 1998- 2000
12th from delhi open school March 1999- 2000
10th From atomic energy central school rawatbhata, C.B.S.E BOARD AJMER RAJASTHAN-INDIA March 1995
INDUSTRIAL EXPERIENCE IN U.A.E
ALLIANCE OILFIELD EQPT & INDUSTRIAL TRADING CO.LLC
FOREMAN (2008 feb – STILL CONTINUING IN THE JOB)

Discussing with Engineers about the progress of work in workshop and site.
Visiting to site to make sure about the all works.
Explain to fabricator about approved drawing.
Arranging people for site works with all accessories.
Maintaining daily production sheets
INDUSTRIAL EXPERIENCE IN U.A.E
SUNRISE ENGINEERING L.L.C FABRICATOR, WELDER CUM FITTER (2006– 2008)
ALLIANCE OILFIELD EQPT & INDUSTRIAL TRADING CO.LLC
FABRICATOR, WELDER CUM FITTER (2008– till doing)

Making fabrication in mild steel, stainless steel and aluminium as per the approved drawing.
Doing site works in case of erection.
INDUSTRIAL EXPERIENCE IN INDIA
1 U.B ENGINEERING LTD.AT THEMBU, MAHARASTRA STRUCTURAL FABRICATOR.
14/04/2001- 01/03/2002
2 DECONS UNDER U.B.ENGNEERING LTD. AT RTPS, KPCL.RAICHUR, KARNATAKA. STRUCTURAL FABRICATOR 03/03/2002 TO 25/07/2002
3 SURESH ENGNEERING WORKS, KOLLAM, KERALA. MECHANICAL FITTER 01/08/2002 TO 28/03/2004
4 DODSAL Pvt. LTD., NPCIL 5&6, RAWATBHATA STRUCTURAL & PIPELINE FABRICATOR 13/04/2002 TO 13/11/2004
5 SHARMA STRUCTURAL PVT. LTD. UNDER HINDUSTHAN CONTRUCTION COMPANY LTD., NPCIL 5&6, RAWATBHATA. FEBRICATOR CUM SUPERVISOR 15/11/2004 TO 30/10/2006
PERSONAL STRENGTHS
- Creativity
- Interest in interpersonal interacts
- Dedicated team player
- Ability to adapt with every situation
- Decision making
- Willingness to walk the extra mile to achieve excellence
* Knowlege of computer & autocad