Zentech India Offshore Marine Engg. Mumbai : Piping Engineer PDMS

[Admin]

Zentech India Offshore &Marine Eng Pvt Ltd
http://zentech-usa.com

Keywords: Piping Engineer

Designation: Piping Engineer
Experience: 2 - 5 Years
Location: Mumbai Suburbs
Education:
UG - B.Tech/B.E. - Chemical, Mechanical
PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Other
Posted Date: 20 Oct 2008

Job Description
Should be well conversant with Plot Plans, Layouts, P &ID, Specifications, Bill of material. Sound knowledge of international codes and standards. as well as 3d software's like PDMS, Cadworx, AutoCAD. Should be able to lead team of Draftsman

Desired Candidate Profile
BE Mechanical /Chemical having 2-5 years piping experience in the field of Oil and Gas, Drilling rigs, Offshore Platforms etc. well conversant with Plot Plans, Layouts, P &ID, Specifications, Bill of material. international codes ,PDMS,Cadworx

Company Profile
Zentech is an engineering consultancy company, specializing in offshore oil & gas industry

Executive Name: Miss Arpana Singh

Address:
Not Mentioned

Email Address: arpana@zentech-usa.com

Telephone: 27781416

[srig_2003]

Gajanan C Bacchewar 170-C Janata flat
Pocket-m

E-mail: Srig_2003 AT rediffmail.com

[EMAIL="Gajanan.bacchewar AT valdelec.com"]Gajanan.bacchewar AT valdelec.com

(09953324457)

(02461 245106)

Sarita vihar
DELHI,
PIN-110076


Objective:
To apply my specialized knowledge of Piping Engg. in a fast growing organization and a full time engineering position in an organization where technical, hard-working, leadership skills would be needed.

Qualifications:

o Bachelor in Chemical Engg. from JNEC AURANGABAD in 2003.

(Aggregate Percentage: 65.50%)

o H.S.C, from latur board, in 1999.

(Aggregate Percentage: 86.00%)

o S.S.C, from Aurangabad board in 1997.

(Aggregate Percentage: 81.06%)

Additional Qualification:
· Piping Engineeringfrom Suvidya Institute of Technology (Mumbai) with Distinction.
· Studied preparation of isometrics, MTO, rack layout, piping &equipment layout,
· Familiar with PT rating calculations, valve data preparation, preparing material specification sheet
Experience : Total experience of 5 years 9 months
A. 3 years 3 months in piping design industry
B 2 years 6 months in pharmaceutical industry

(1) 13TH OCT 2008 : VALDEL ENGINEERS & CONSTRUCTORS PVT. LTD (DELHI)
TILL DATE
Designation…SR.PIPING ENGINEER… PROJECT: (PETROLOGISTICS)
Client: S&B ENGINEERS &CONSTRUCTORS

Responsibilities
1. Equipment modelling according vendor print in PDS (3D).
2. Piping routing from p&id & piping studies in PDS (3D).
3. Isometric extraction from PDS of modelled piping
4. co-ordination with stress & civil group
5. support marking ( primary& secondary)
6. PDS model updating as per revised piping database

(2.) 19TH OCT 2007 : LARSEN & TOUBRO LIMITED (DELHI)
TO 10TH OCT 2008
Designation…EXECUTIVE PIPING ENGINEER
PROJECT: A. PANIPAT NAPTHA CRACKER
B. MSQ UPGRADATION
OWNER : IOCL
1. Equipment modelling according vendor print in PDS (3D).
2. Piping routing from p&id & piping studies in PDS (3D).
3. Isometric extraction from PDS of modelled piping
4. co-ordination with stress , mechanical, process , instrumentation & civil group
5. support marking ( primary& secondary)
6. PDS model updating as per revised piping database
7. co-ordination with site

(3) 24th July 2006 : RELIANCE ENGINEERING ASSOCIATES PVT LTD TO 10TH OCT 2007 (JAMNAGAR)

Designation… PIPING ENGINEER
PROJECT: (JERP)
OWNER : RELIANCE
Responsibilities
1. Piping modelling from p&id & piping studies in PDS (3D).
2. Isometric extraction from PDS of modelled piping
3. Co-ordination with stress, mechanical, process, instrumentation & civil group
4. support marking ( primary& secondary)
5. PDS model updating as per revised piping database
6. Co-ordination with site & site visit.
7. updating model review comments


(4) 15TH Jan 2004
TO 15TH July 2006 : ELIXIR CHEMICALS PVT LTD, TARAPUR (MUMBAI)
Designation …….. Production officer

Responsibilities

1. Supervision for catalytic hydrogenation reaction (R/NI, PD)
2. Documentation as per FDA requirement
3. pay attention to maintenance of plant
4. Fulfil the requirement during shut down job .
5. Responsible for product quality


projects:
As a part of my Curriculum in my B.E (Chem.), I had successfully completed my project on Production of glycerine in Colgate Palmolive pvt ltd in Aurangabad.


Optional Subject
· Piping Engineering
· Process modelling &simulation
· Food Processing Technology

Computer Knowledge:
Work experience in the following areas:
· Micro station-SE
· PDS (Intergraph’s design software)
· Spoolgen v5
· Smart plant review
· Navis works
· I-sketch
· Microsoft excel

Familiar with
1 CEASAR –II (stress analysis)
2 AutoCAD 2006




Permanent Address:
S/o Chandrakant P Bacchewar
At Post Chandola
Tq mukhed
Dist Nanded
Maharashtra - 431715

Personal Details:
Date of Birth: 1 June 1981
Gender: Male
Marital Status: married
Blood Group: ‘o’ +ve
Languages known: English, Hindi, and Marathi

Interest:
Watching Cricket, listening to soft music, playing carrom, playing cards


PLACE:
DATE: GAJANAN BACCHEWAR

[Guest]

i am mechanical engineer.i have done piping course.i have one year exp in hvac