B.Tech Mechanical Engineer Fresher : Resume CV

[Guest]

CURRICULUM VITAE
A.VENKATA RAMANA RAO
ramanarao304 AT gmail.com

Career Objective :
To be a part of an organization where I can fully utilize my skills and make a significant contribution to the success of the employer and at the same time

Summary :
- Good Knowledge in Strength Of Materials, production planning
- Involved in lot of academic projects during the graduation
- Basic skills in CAD ,ANSYS, MASTER CAM
- Self-Motivated. Excellent communication skills and Strong work ethic
- Very good team player

Academic Qualifications :
- B.Tech from SRI CHUNDI RANGANAYAKULU Engineering College (JNTU University) in Mechanical Engineering Department with 66.7% (Aggregate) IN 2012
- Intermediate from SRI CHAITANYA JUNIOR COLLEGE with 80.1% in M.P.C (Maths, Physics and Chemistry) group in 2008
- S.S.C from SRI GOWTHAMI PUBLIC SCHOOL with 85.5% in 2006

Academic Projects :
- B. Tech Thesis : I had done main project “Off line work table for setting entry guide boxes of roughing train in bar mill in LMM department at Visakhapatnam steel plant”

- Project Description :
i. Rolling is a metal forming process in which metal stock is passed through a pair of rolls.
ii. In rolling there are two types of work stands i.e Horizantal stand and Vertical stand.
iii. A work stand basically comprises of work rolls, guides, service lines.
iv. A Guide is used to guide the rolling material on its way of entering aand leaving the roll pass
v. The problems associate in this are, sometimes it is required to change/reset the guides in rolling line due to different like wear and tear of guides, mis-alignment of guides etc.,
vi. To solve the above problems, we found a solution i.e., ''Off line work table" for setting entry guide boxes of roughing train.
vii. The spare entry guide box is assembled by using the above table.Once the ready spare guide is placed on stand it exactly matches with the roll pass without any deviation.
viii. By this, it avoids resetting works on guides in rolling line,thus it saves a lot of rolling time.

Achievements and Extra Curricular Activities :
- Volunteered technical symposiums in our college
- Player of branch cricket team

- Other Activities : Discussing in forums, playing cricket , chess

Declaration :
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Place : RAJAHMUNDRY
(A.VENKATA RAMANA RAO)

[Guest]

CARRICULLUM VITAE
Email Id- sanjusharma318 AT gmail.com
SANJEEV KUMAR
________________________________________
CAREER OBJECTIVE :
- TO HOLD A POSITION OF RESPONSIBILITY WITH AN OPPORTUNITY FOR THE GROWTH OF THE ORGANISATION ALONG WITH HAVING A LONE TERM RELATIONSHIP AND TO CONDUCT MYSELF IN MY SUCH MANNER SO AS TO UPLOAD THE LIGNITY OF THE PROFESSION.
- COMPREHENSIVE PROBLEM SOLVING ABILITIES, PLESING PERSONALY, FLUENT VERVALLY, ABILITY TO DEAL WITH PEOPLE DIPLOMETICALLY.
EDUCATION PROFILE :
- 10TH PASS IN CBSE BOARD
- 12TH PASS IN CBSE BOARD
TECHNICAL QUALIFICATION :
- THREE YEAR DIPLOMA IN MECHANICAL ENGGINEERING FROM (IME) INDIA MUMBAI, MEMBERSHIP NO IS -89969 IN 2010.
- AUTOCAD 2D..
COPUTER LITERRACY :
- BASIC KNOWLEDGE OF COMPUTER.
EXPERIENCE :
- 1 YEAR EXPERIENCE IN SHEETMETAL WORK AS A QUALITY HEAD IN QUALITY CONTROL DEPARTMENT.
- JOB WORK : - CHECK COMPONENT /MATERIAL AS PER DRAWING ACCORDING MEASURING TOOLS & EQUIPMENTS, MAKING ISO REPORT.

- IN SUNRISE ENTERPRISES SINCE FROM 2/6/2010 TO TILL DATE.
STRENGTH :
- HONEST, PUNTUAL, POSITIVE ATTITUDE.
SOFT SKILLS :
- ABILITY TO WORK IN A NEW CHALLENGING ENVIRONMENT.
- ALWAYS TRY GIVING MY BEST.
- I SELF MOTIVATED PERSON.

DATE; ………………
PLACE; ……………... (SANJEEV KUMAR SHARMA)

[Guest]

MADHAN. M
E-mail id : mmmadhan90 AT gmail.com

Carrier Objective :
Intend to build a career in an organization offering me an opportunity to contribute effectively as a committed & dedicated professional, which will help me to work as a key player in a challenging environment for the growth of organization.
Professional Synopsis :
- Presently working as an QUALITY INSPECTION ENGINEER IN OVERSEAS MERCHANDISE INSPECTION COMPANY INDIA PVT. LTD., Chennai. (For TVS-SUNDARAM FASTENERS, AUTOLEC DIVISION, Gummidipoondi) From Nov’2011 to till date.
- Understanding and knowledge about quality standards.
- Skilled at grasping new concepts quickly and utilizing in a productive manner.
- An effective communicator with excellent interpersonal & relationship building skills.
Academic Qualification :
- B.E Mechanical Engineering from Thanthai Periyar Government Institute of Technology (Anna University), Vellore in 2011 with 69% aggregate.
- Higher Secondary from Tamil Nadu State Board with 93% aggregate.
- Secondary education from Tamil Nadu State Board with 76% aggregate.
Software Proficiency :
Office Application : Microsoft Office.
Software package : AUTO CADD, ANSYS.
Data Base : SAP
Key Responsibilities :
- Development of Inspection standards.
- Conducting periodic internal audits to assess the status of deployment of systems and take corrective measures for achieving organizational objectives.
- Development of Supplier Quality levels to meet customer requirements through audits, PPAP and FMEA.
- Supplier rejection analysis and control.
- Implementing quality standards and maintaining relevant documents.
- Ensuring that EVERYTHING IN IT’S RIGHT PLACE in the shop floor (5’s activities) to achieve that right product to reach customer.
- Reaching faster than anything for various customer compliances & taking corrective, preventive actions & ensuring that such defects won’t come again.
- Identify Training (Skill Matrix) needs for the operators.
- Scrap Control (Using SAP).
- Education & Training of new operators in products, machines & Gauge Operation.
- Handling all measuring instruments like Linear Height Gauge, Depth gauges, Air Gauges, Comparator and Slip Gauges, Spring Load Tester etc.,
Project
TOPIC : DEFECT ANALYSIS OF A DYNAMIC STEEL STRUCTURE
I have done my project in NLC. In NLC, special mining equipments plays a vital role in removal over burden and excavation of lignite in mines. After some years, steels get defected (holes, cracks, change in properties), because of the heavier cutting force. To find out the defect we have used ultrasonic testing (NDT) as a tool. For reference, we have fabricated various thicknesses of steel plates and calculated the various sizes of defects. From that reference table, we can easily predict the size of the defect.
In plant Training :
Attended 13 days training in Neyveli Lignite Corporation, Neyveli. In NLC, I have seen the various workshop(foundry shop, teeth brazing shop, machine shop, fabrication shop, maintenance shop) and gained the knowledge about furnaces, lathe, drilling, hobbing, surface grinding, shaping machines, etc.,

Declaration :
I hereby declare that all the above furnished details are true to the best of my knowledge and belief.
Place : Chennai
Date : (MADHAN. M)

[dwivedi408]

RESUME

NAME : Rahul Kumar Dwivedi
DEGREE : B. Tech (ME)

Address For Communication :-
Dist. Jalaun
285127(U.P.)
E-mail :rahul.12690d AT gmail.com

Career Objective :
- Willing to pursue my career in an organization, which provides me an environment for achiving my goals where my skills, experience and abilities will be used effectively and which helps me to grow both professionally and individually.

Education detail :
Degree Name Institution Year of passing Percentage High School
10’th Jugal Devi Sarswati Vidhya Mandir, Kanpur 2005 70.6%
Intermediate (10+2)’th Jugal Devi Sarswati Vidhya Mandir, Kanpur 2007 70.2%

I have completed B. Tech(ME)- 2008-2012

Degree Name Institution Percentage
B.Tech-1st year Bhabha College Of
Engg. Ramabai Nagar 75.2%
B.Tech-2nd year Bhabha College Of
Engg. Ramabai Nagar 73.1%
B.Tech-3rd year Bhabha College Of
Engg. Ramabai Nagar 75.9%
B.tech-4th year Bhabha College Of Engg. Ramabai Nagar
80.6%

Project on :
- Wind energy & shocker energy car

Software skill :
- 2D & 3D Drawing with AutoCAD

CERTIFICATION :-
Aliens Computers (Certificate No. : AC-1055)

Interesting Area :-
- I.C.Engine , Automobile Engg & production technology
INDUSTRIAL EXPOSURE :-

- undergone four weeks vocational training in Gas Authority Of India Limited(GAIL)

Skills :
- Self motivated person and a positive thinker.
- Good communication- written and spoken skills.
- Goal oriented attitude.

Strength :
Group working capabilities with helping nature, analytical skills, positive emotions, hard work, friendly nature and patience.

Personal Profile :
Name : Rahul Kumar Dwivedi
Father’s Name : Mr.Mahesh Chandra Dwivedi
Date of Birth : 12/06/1990
Gender : Male
Marital Status : Single
Religion : Hindu
Language : Hindi and English
Nationality : Indian
Hobbies : Playing cricket & Volleyball

Declaration :
- I am here declaring that if you will give a chance, I will do my best to satisfy my seniors & the organization by my work.
- I do hereby confirm that the information given in this form is true to the best of my knowledge and belief.

Date : APPLICANT
Place :
Rahul Dwivedi

[Unregistered]

Curriculum Vitae
Name : Barkha Choudhury
Bankura(WB)
E-mail : barkha.choudhury AT gmail.com
Blood group : B+

Academic Qualifications :
Degree / Certificate Qualification Institute Board / University Year Aggregate % / CGPA :
Graduation
B-Tech Dr.B.C.Roy Engineering College, Durgapur.
West Bengal University of Technology 2013 80.0%
10th Matriculation W.B.B.S.E 2005 71%
Others Diploma K.G.Engg, Institute,
Bishnupur. West Bengal State Council Of Technical Education 2010 80.2%

Trainings / Projects Undertaken :
Name of Institute / Organization Project Title Duration :
Durgapur Project Limited Vocational Training 20th Sept to 19th Oct
MSME Tool Room Kolkata CAD/CAM using CATIA 19th Dec to 18th Jan

Additional Qualification / Achievements / Certifications :
- Modern computer Application
- Auto Cad
- Catia

Subjects of Interest :
- Strenght Of Material
- Manufacturing Technology

Hobbies :
- Listening Music,Cooking
- Spent Time With Computer

Date of Birth : 27/09/1989
Gender : .
Languages Known : English, Hindi, Bengoli.

Date : Signature :

[Unregistered]

R.MURUGARAJ E-mail : rajendramurugaraj AT gmail.com

OBJECTIVE :
To achieve a suitable position in Health, safety and environment filed in a reputed organization where my managerial skills, experience and knowledge can be utilized for continual improvement of occupational health, safety and environment for meeting the goals and objectives of the organization.

PERSONAL STRENGTH :
- Hard Working
- Good Leadership Qualities
- Self-confidence
- Quick Learner

ACADEMIC QUALIFICATION :
- Master of Engineering (M.E. Industrial Safety Engineering)
Institution : MEPCO SCHLENK ENGG COLLEGE, Sivakasi
Year of Passing : April 2013
Percentage of Marks : 84%

- Bachelor of Engineering (B.E. Electronics and Communication Engineering)

Institution : SATHYABAMA UNIVERSITY, Chennai
Year of Passing : April 2010
Percentage of Marks : 79%

- Diploma in Electrical and Electronics Engineering
Institution : P.A.C.R Polytechnic College, Rajapalayam
Year of Passing : April 2007
Percentage of Marks : 82.11%

- Secondary School Certificate (State Board)
Institution : N.A. Annaparaja Memorial Hr. Sec School,
Year of Passing : April 2004
Percentage of Marks : 91.2%

FIELDS OF INTEREST :
- Fire Safety
- Safety in Construction Site
- Safety management
- Microcontroller and Microprocessor
- Electronics Circuits and Analog Electronics

COMPUTER EXPERIENCE :
- Basics in C, C++, Microsoft Office, working knowledge of Autocad-2007 and proficient in MS-WINDOWS XP, VISTA, 7 Operating Systems.

INPLANT TRAINING UNDERWENT :
- A period of 6 days training at Viveka Electronics and Power Systems in Rajapalayam.
- A period of 11 days training at Sri Vishnu Shankar Mill Ltd in Rajapalayam.

PROFESSIONAL MEMBERSHIP AND EXTRA CURRICULAR ACTIVTIES :
- Undergone 2 days training program on “FIRST AID” conducted by St.John Ambulance Association
- Active Member in Safety Day Celebration ’12 at Mepco Schlenk Engineering College.
- Member of NATIONAL SAFETY COUNCIL

ACADEMIC PROJECTS :
UG PROJECT
TITLE : GSM BASED TRANSMISSION LINE MULTI FAULTS DETECTION AND AUTOMATIC INDICATION TO ELECTRICITY BOARD
Description :
The objective of my project is, when the voltage through the line falls below a programmed voltage, indication is provided by the microcontroller through the GSM Modem.
Another GSM Modem which is located in the EB control center. It will send the message to the mobile, which is placed in the electricity board. Then workers can easily identify the place where the problem has occurred.

PG PROJECT :
TITLE : VEHICLE OVER SPEED CONTROL AT DIFFERENT SPEED LIMIT ZONE WITH AUTOMATIC MOBILE PHONE ANSWER SYSTEM USING IVRS (INTERACTIVE VOICE RESPONSE SYSTEM).
Description :
The main aim of my project is, to avoid the mobile phone usage while driving. Once the call reaches the mobile phone the automated IVRS (Interactive Voice Response System) will be activated by means of micro controller.
Another aim of my project is to control and maintain the speed of the vehicle at different speed limit zones like School zones and Hospital zones etc.

PERSONAL INFORMATION :
Father’s Name : R. Rajendran.
Father’s Occupation : Cloth Merchants
Date of Birth : May 26, 1989
Sex : Male
Age : 23
Nationality : Indian
Marital status : Single
Languages : English, Tamil and Telugu
Hobbies : Playing Cricket, Watching Movies, Reading
Books
E-mail Id : rajendramurugaraj AT gmail.com

Declaration :
I hereby declare all the information’s furnished above are authentic and true to the best of my knowledge and belief.

Place : Yours Sincerely,
Date : (R.MURUGARAJ)

[Unregistered]

PRINCE SHARMA
Email : bhardwajprince18 AT gmail.com

CAREER OBJECTIVE :
To utilize skills and knowledge in advancement of technology and as a beginner, to learn various methods and techniques to get establish as a competent engineer in firm organization.

EDUCATIONAL QUALIFICATION :
Degree Institute University / division Year of passing Percentage
B.Tech
(Mechanical engineering) Sunder Deep College of Engg.& Tech. Ghaziabad GBTU 2013 65.9%
Intermediate Maharaja Ranbir singh School,Jammu J&K board 2009 61.60%
High school Shastri Memorial High School, Jammu J&K board 2007 72.00%

SOFTWARE SKILLS :
Operating Systems : Windows XP,Windows7
Softwares : Microsoft Word, PowerPoint,

PROJECT UNDERTAKEN :
PROJECT :-
Heat Exchanger using tubes
Brief Overview of the Project : Parallel and counter flow heat exchanger to illustrate exchange of heat, which is used in various industries. A shell and tube exchanger consists of several tubes inside the cylindrical shell. Two fluids can exchange heat as one fluid flows through the tube while other flow over the outside of the tube.

SUMMER TRAINING :-
Sri Ram Pistons & Rings Pvt. Ltd, Ghaziabad – Understand the production process for the Pistons.

FAVOURITE SUBJECT :-
Thermodynamics
Production Engineering
Fluid Mechanics

CERITIFICATION :-
UGS – NX 7.5 ( 3D Modeling, Assembly)
AUTO CAD 2010

STRENGTHS :
Determined to learn with practical approach.
Enthusiastic and can produce results under deadline constraints.
Efficient Team Worker.
Can handle a given task individually and keep the ability to cope with pressure and difficult
Decision-makingsituations.

PERSONAL DETAILS :
Father’s Name : Suersh Kumar Sharma
Mother’s Name : Pushpa Sharma
Date of Birth : 20-08-1991
Sex : Male
Marital Status : Single
Languages known : English, Hindi
Hobbies : Watching Movies, &Playing cricket.

DECLARATION :
I do hereby declare that the particulars of information and facts stated above are true, correct & complete.

Place :Hapur
Date :
PrinceSharma