Maintenance Manager / Electrical Engineer / Instrumentation Engineer Power Plant : East Africa

[360Degrees]

A leading European power generation company, showing growth with both greenfield and brownfield projects, generating clean energy for its clients

Job Description:
As a Maintenance Manager you will be responsible for developing the maintenance organization and managing both planned and emergent maintenance to ensure the availability of the plants meet or exceeds our contractual obligations and internal targets.

You will be expected to supervise a team(Mechanical, Electrical, C&I Engineers and Technicians) but also play a hands-on role, acting as a maintenance specialist as well as leading the team.
The Maintenance Manager will be in charge of the following activities of maintenance at the power plant and for the off-shore platform:
• Ensure the execution of all scheduled and non-scheduled maintenance activities of all equipment (engines, engine & common auxiliarieson-shore and platform equipment off-shore)
• Use properly, monitor and handle spare parts, tools and operational equipment by him/her and the Maintenance team
• Follow-up and participate in executions of all the different maintenance team activities
• Ensure that the “Work Authorization Process” is strictly followed and implemented for all equipment before/and after performing any task
• Ensure and perform all LOTO (Lock Out Tag Out) procedures of equipment before/and after performing any task
• Develop standard maintenance and follow the ContourGlobalHealth, Safety& Environmental policies and ensure proper applications
• Ensure continual training of the maintenance team
• Supervise performance of planned maintenance
• Develop maintenance philosophy (e.g. time vs. condition based maintenance)
• Develop a supporting electronic documentation of maintenance procedures, tracking and record-keeping
• Develop optimal logistical infrastructure and processes for stock-keeping and optimization of the routing and scheduling of maintenance personnel
• Develop performance indicators and set up a regular reporting system
• Assist with recruitment, training and retention of maintenance specialists
• Train on-site operators to perform routine maintenance tasks and reviewing maintenance work done

Candidate Requirement
• Master’s degree in Engineering or equivalent experience, with 10 plus years of experience in various field of activities related to maintenance and management of electrical power stations and off shore platforms
• Accustom to working in remote parts of Africa at operation sites of power generation and having the resourcefulness to adapt to ever changing job requirements and conditions
• Familiar with contractor health and safety standards and the ability to enforce company H&S standards as well as environmental management plans as required providing a safe and healthy work site
• Proven problem solving skills and ability to analyze project related documents such as operating and maintenance procedures, process flow diagrams, piping and mechanical and instrument drawings, and general arrangement as needed to interpret and respond to contractor questions
• Good verbal and written communication skills and ability to utilize, proficiently, Microsoft Office products such as Word, Excel, MS Project, and Power Point
• Ability to work independently and as a team member at an operation site
• English fluency.
Experience: 10 - 15 years

Compensation Details
Salary: Best in the industry
Expatriate-based perks along with return air tickets to india every 6 months.

Send resume to dir@360degreeresources.com

[360Degrees]

A leading power generation company that has grown through greenfield and brownfield development, for generation of clean energy.

Job Description: The Electrical Engineer will assist the Maintenance Manager in maintenance for operations to deliver equipment and controls of on shore electrical power station and off shore gas processing facilities on the barge, as well as, maintenance of the subsea piping, risers and separators. Working under the supervision of the Maintenance Manager, the individual will monitor daily operation maintenance activities, to insure compliance with operations and coordinate maintenance plan for the power station and the barge equipment.

The Electrical Engineer will be in charge of following activities, supervising an Electrical Technicians team:
• Verify electrical equipment and parts according to the maintenance plan and expectations
• Supervise all scheduled and non-scheduled electrical activities of all equipment (on shore engines, engine & common auxiliaries and off shore gas treatment equipment)as per Maintenance Manager’s Instructions and planning
• Prepare data reports for Maintenance Manager
• Supervise proper records of parameters noted on site (running hours/flushing counters, operating parameters)
• Give the right information collected to the Maintenance Manager in due time
• Ensure regular and proper handling and maintenance of tools
• Ensure that advices/instructions are implemented and followed prior to approval from hierarchies if need be
• Act immediately and responsibly in case of fire, gas emergency alarm and accident that might happen on site
• Respect the Health, Safety & Environmental policies and ensure proper applications

Candidate Requirement
• Bachelor’s degree in Electrical Engineering or equivalent experience, with 5 plus years of experience in various field construction activities related to large industrial applications including marine applications both on and off shore
• Use to working in remote parts of Africa at construction sites and having the resourcefulness to adapt to ever changing job requirements and conditions
• Familiar with contractor health and safety standards and the ability to enforce company H&S standards as well as environmental management plans as required providing a safe and healthy work site
• Proven problem solving skills and ability to analyze project related documents such as process flow diagrams, piping and electrical and instrument drawings, general arrangement and equipment specifications as needed to interpret and respond to contractor questions
• Good verbal and written communication skills and ability to utilize, proficiently, Microsoft Office products such as Word, Excel, MS Project, and Power Point
• Ability to work independently and as a team member at an operation site
• English fluency.

Experience: 5 - 10 years

Compensation Details
Salary: Best in the industry
All other expatriate-related perks shall be given, and return air tickets to India once in every 6 months

Send resume to dir@360degreeresources.com

[360Degrees]

A leading European power generation company in East Africa, that believes in growth through greenfield and brownfield development, producing clean energy

Job Description:
The Control and Instrument Engineer assists the Maintenance Manager in maintenance for operations to deliver equipment and controls of on shore electrical power station and off shore gas processing facilities on the barge, as well as, maintenance of the subsea piping, risers and separators. Working under the supervision of the Maintenance Manager, the individual will monitor daily operation maintenance activities, to insure compliance with operations and coordinate maintenance plan for the power station and the barge equipment.
The Control and Instrument Engineer will be in charge of following activities, supervising an Control and Instrument Technicians team:
• Verify electrical equipment of control and instrumentation and parts according to the maintenance plan and expectations
• Supervise all scheduled and non-scheduled activities, tests, and troubleshooting of all on shore and off shore equipment of the power plant and barge as per Maintenance Manager’s Instructions and planning
• Prepare data reports for Maintenance Manager
• Supervise proper records of operating parameters recorded on site
• Give the right information collected to the Maintenance Manager in due time
• Ensure regular and proper handling, testing, calibration and maintenance of tools
• Ensure that advices/instructions are implemented and followed prior to approval from hierarchies if need be
• Act immediately and responsibly in case of fire, gas emergency alarm and accident that might happen on site
• Respect the Health, Safety & Environmental ContourGlobal policies and ensure proper applications

Candidate Requirement

• Bachelor’s degree in Engineering for Electrical and Controls (instrumentation) or equivalent experience
• 5+ years of experience in various field construction activities related to large industrial applications including marine applications both on and off shore
• Familiar with contractor health and safety standards and the ability to enforce company H&S standards as well as environmental management plans as required providing a safe and healthy work site
• Proven problem solving skills and ability to analyze project related documents such as process flow diagrams, automatism, piping and electrical and instrument drawings, general arrangement and equipment specifications as needed to interpret and respond to contractor questions
• Good verbal and written communication skills and ability to utilize, proficiently, Microsoft Office products such as Word, Excel, MS Project, and Power Point
• Ability to work independently and as a team member at an operation site
• English fluency.

Experience: 5 - 10 years

Compensation Details
Salary: Best in the industry
All other expatriate-related benefits shall be provided, and return air tickets to india on leave, once in every 6 months.

Send resume to dir@360degreeresources.com

[ashwanikumar6012@gmail.com]

PERMANENT ADDRESS :
Ashwani Kumar Sharma
Email :- ashwanikumar6012 AT gmail.com
K.ashwani36 AT yahoo .com

Carrier Object
A good academic background coupled with dynamic professional experience has widened my understanding of issues and generating reasonable solutions with the perfection of Engineers. Have a strong orientation towards developing furthermore skills to tackle practical cases in engineering issue.

SUMMERY :-
Worked in Transmission lines from 11 KV to 132 KV S/C & D/C
66KV Transmission line from Bhakra to Rakkar Distt Una Himachal Pradesh
132 KV Transmission line from Amb To Distt Una Himachal Pradesh
132 KV Double Ckt Transmission Line from Jassore to Dehra Distt Kangra. Himachal Pradesh
Augmentation and construction of 33 KV lines in City Shimla Himachal Pradesh
Construction of 11 KV & LT lines & Sub Station Gagret Distt UNA Himachal Pradesh
Material procurement cell ,Tendering, comparative Statement , Material specifications in the material management cell Shimla
Commercial cell sales purchase of power ,Deciding the per KWH cost ,tariff collection of revenue from sale of power in commercial Unit Shimla

Carrier :-
Start Job as Junior Engineer Electrical i.e. 15, December, 1981 in the Government Department Himachal Pradesh State Electricity Board
Voluntary retired from the State Government Department July 2010 from the Post of Additional Assistant Engineer Electrical
Again Joined in the International Company In December 2010 Noida INDIA
Now present working in Rwanda (Africa) Electricity water supply & sanitary Authority (EWSA) for Rural Electrification Project

Achievements’ :-
1 To prepare planning and construction schedule in respect of Transmission lines right from survey ,Tower spotting data ,Sag calculation ,Static calculation ,Tower profiles ,Stubbing of tower, fixing of template, , Tower Designs , erection , Stringing & sagging of conductors & commissioning of Transmission lines & also construction of Grid Sub- Stations , maintenance thereof
2 Construction of 33 KV & 11 KV lines & maintenance upkeep the lines for breakdown, regular patrolling the lines & Sub Stations
3 Preparation of estimates, drawings & inventory of material thereof
4 Procurement of material, maintained the specifications of material, & Quality Control thereof
5 Supervision the Men, Material. & Machinery upkeep the record of material & budget of estimates, Plant & Machinery etc
6 Progress of work, timely completion of Job/Work reporting to the higher Authority

Academic Qualification :-
1 Metric
2 Three Years Diploma in Electrical Engineering
Experience : - 29 years in the State Electricity Board
1 Year in International Company

Computer Proficiency :-
Microsoft, star office Internet ERP M. S word MS Project Etc

Extracurricular Activity - :-
Active member of employee welfare committee
Organized the culture program Social activities such as poor welfare committee, Gram welfare committee

Strength :-
Engineering coordination, engineering procedure and calculations
Project planning, coordination and project management
Skill to deal with people, which is very essential to engineering and construction project
Proactive, articulate, tactical mind system focused and development oriented
Analytical skills, high level of motivation & constant endeavor to improve
Good IT skills
Fluent English, Hindi, Punjabi

Personal Details :-
Date of birth : - 15, March, 1960
Marital Status : - Married
Nationality :- Indian
Expected Salary : - Negotiable
Time of joining :- Immediately

ASHWANI KUMAR SHARMA

[Unregistered]

RESUME
CHANDAN PRABHAKAR PATIL :-
Email ID : chandan.patil1010 AT gmail.com

CAREER OBJECTIVE :-
To pursue career as a Instrumentation Technology Professional that allows application of my knowledge and exposure to various techniques which utilizes my strength to maximum towards continued growth and advancement of the organization.

PERSONAL PROFILE :-
Name : CHANDAN PRABHAKAR PATIL.
Date of birth : 22/10/1991
Gender : Male
Nationality : Indian
Languages known : English, Marathi & Hindi

EDUCATIONAL QUALIFICATION :-
Examination Year Institute % Marks/Class
S.S.C. March 2007 S.K.P. Walawalkar, Kurla. 81.23% (Distinction)
Diploma Engineering Instrumentation June 2010
Vivekanand Education Society’s Poly.(Mumbai University) 78.56% (Distinction)
Degree Engineering Instrumentation Aug. 2010 to June 2013 Bharti Vidyapeeth College Of Engineering. (Mumbai University) A waiting For 8th Semester Results

ELECTIVE SUBJECT IN FINAL YEAR :-
- ES :- Expert System
- PPI :- Power Plant Instrumentation
PROJECT CONDUCTED :-
- Diploma :- “MICROCONTROLLER BASED BATCH PROCESS”

The objective of Project is Batch control using microcontroller. Project application based on mixing of two fluids for a predetermined time with the help of Pipeline mounted solenoid valve.

- Degree :-“ FEATURE EXTRACTION AND ANALYSIS SYSTEM FOR INDUSTRIAL PIPELINES”
Feature extraction and analysis involves detection of rusting, cracks and surface
Non-uniformity but scope of our project is to detect only cracks in industrial pipes. By using Ultrasonic Sensor for detection of cracks in pipeline can be found.

SKILL SET :-
“MTS Exam” :-2004-05 & 2005-06
“Dr. Homi Bhabha Bal Vaidnyanik Competition” :-2002-03 & 2005-06

HOBBIES :-
Marathon Running (Trying to get the place in Indian Athletics team).

PLACE :- Mumbai .
DATE :-