www.quiverelectronics.com Quiver Electronics Hyderabad : Supervisor Trainee

[ijt.jency]

Company Name : Quiver Electronics(quiverelectronics.com)
Company Location : Hyderabad
Designation : Supervisor Trainee

Website : http://www.quiverelectronics.com/careers.html

Careers :
We require Engineers, supervisors for our technical division :
1) Supervisors :
Diploma in Electronics, EEE and instrumentation branches from a reputed institution.

Experience of 2-5 years is essential.

We require young, energetic and result oriented marketing personnel

Qualification :
A degree with MBA (Marketing) from a reputed University/Institution.

Candidates with experience are preferred. However, freshers are considered for trainee positions.

2) Engineers :
Qualification :
BE/B.Tech from a reputed University/Institution in Electronics and commutation engineering branches.

Experience of 1- 3 years is desirable. However, fresher’s are considered for trainee positions.

About us :
Quiver Electronics is an apex manufacturing unit of electronic devices. Our venture is to pack the emptiness of a steadfast firm that is concerned about the needs of the customer in the issue of electronic products. We design and bring the devices into being such that they cater to domestic as well as industrial needs. One could not afford evading security facet in accordance with living a stress free life.

Contact us :
Quiver Electronics
Plot No.82, 2nd Floor, Savarkar Nagar
Beside ESI Hospital, Nacharam, Hyderabad - 76
Andhra Pradesh, INDIA.

[Unregistered]

CURRICULUM VITAE
C.SRINIVAS,
Email :csrinivas261 AT gmail.com.

CAREER OBJECTIVE :
To work in the most challenging position with an organization that provides ample opportunities to learn and to contribute. I am flexible & willing to work on any technology.

EDUCATIONAL QUALIFICATION :
Completed M.Tech (PE) from Gokaraju Rangaraju College with an aggregate of 60% in the year 2013.
Completed B.Tech (EEE) from VIF College with an aggregate of 54.73% in the year 2008.
Intermediate (10+2) from ALIYA Junior College with 48% in April 2004.
10th standard from Vijaya Nagar Colony Gov’t School with 63% in March 2002.

TECHNICAL SKILLS :
HARDWARE LANGUAGES : MATLAB, PSIM, PSPICE, TINA.
Programming languages : C& Data Structure, C++
Operating Systems : Windows 98,2000,XP & Windows 7

ACADEMIC PROJECTs :
M.Tech Project :
Title : Fluorescent Lamp Drive.
Duration : 6-Months.
Material used : Using IC is MC34262, SMPS Transformer.
Responsibilities : Designed schematic circuit and simulation done by using
MATLAB Software, Component Selection.
Team Size : 1 Member.
DESCRIPTION : To drive the fluorescent lamp with high frequency by using
Electronic ballast circuit. In this circuit we have boost circuit and half bridge circuit, a boost converter (step-up converter) is a power converter with an output DC voltage greater than its input DC voltage. When the switch is turned ON increasing inductor current. When the switch turned OFF Inductor current is through the fly back diode D, the capacitor C and the load R. When the line voltage is applied, capacitor C1 charges exponentially through resistor R1. When the voltage across C1 reaches the trig value of D4, the Diac turns on, discharging C1 into the Base Emitter network of Q2. This transistor turns on and the change in collector current through the primary of T1 generates a voltage across each of the secondaries of T1. The voltage VBB is negative for the upper switch and positive for the lower one. This forward biases Q2 and the Collector current of this transistor keeps raising until the core of T1 saturates.

B.Tech Project :
Title : Solar lighting system.
Duration : 6-Months.
Material used : Solar panel, Battery, Tube light.
Responsibilities : Designed schematic circuit and Component Selection.
Description : The suns, solar panel, battery, triggering the circuit, relay
Drive circuit, amplifier circuit are the main requirements of lighting system. The heat energy from the sun falls on the solar panel; it converts into electrical energy and stores this energy in the battery i.e. storage circuit. One terminal of the solar panel connected to manual switch and another terminal to the battery. In between solar panel and battery diode kept in forward bias to stop the flow of reverse current. One terminal battery is connecting triggering circuit. In this triggering circuit we have LDR resistor and 555 timers.
LDR is electronic component whose resistance decreases with increasing light intensity. This also called photo resistor and photo conductor. The resistance of the LDR normally high during the day time when the light rays falls on the LDR.
Relay circuit is electromagnetic switch. When the voltage enters into the relay drive circuit the coil gets electro magnified and voltage enters into amplifying circuit.
In this Amplifying circuit transistor ranges BC3055 and another is BC187.in this circuit one terminal connect to ground and another is connect step-up transfer, it is transfer to increase output voltage. The load is connecting at this point.

ACHIEVMENTS :
School first 6th & 7th class in “BHAGHAT SINGH UPPER PRIMARY SCHOOL”.
Participated in sports of our “VIJAYA NAGAR COLONY GOVE’T HIGH SHOOL” I got first prize in shot put.
Participated in cricket tournaments in school level and college level.
Participated in college cultural activities.

STRENGTHS :
Dedicated towards my job, Confidence, Cool and Calm.
Thinking, Strong Determination, Highly Ambitious.
Tackle any type of situation.

PERSONNEL PROFILE :
Father name : C. Krishnaiah
Date of birth : 02-05-1985
Languages known : Telugu, Hindi, English.
Marital status : Single
Gender : Male
Nationality : Indian
Religion : Hindu

DECLARATION :
I hereby declare that the above information and particulars are true and correct to the best of my knowledge and belief.
Date :
Place : Hyderabad
(C.SRINIVAS)