IAP Company Ltd Delhi : Piping Design Engineer

[Admin]

IAP Company Ltd.
http://www.iap-online.com

Keywords: Design Engineering, Piping Isometric, Plant Engg, Piping Engg, Mechanical Engg, Piping design

Designation: Lead Engineer
Experience: 10 - 20 Years
Location: Delhi
Compensation:
Best in the Industry
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date: 04 Oct 2008

Job Description
Graduate Mechanical Engineer with min. 10 years of Design Engineering experience in Plant / Piping Engg.
Should have experience in managing a large Piping design group, responsible for -Conceptual and detailed piping design calculations, equipment sizing and weights.
Piping and equipment layouts, plot plans, elevations and section drawings.
Piping and Pipeline studies and analysis, using typical stress analysis software.
Piping material classification and valves specifications
Master equipment lists and data sheets.
Piping Isometrics and Material Take off List (MTO)
Mechanical equipment requisitions.
Provide inputs to the process group during P&ID generation.
Participate in Risk Assessment, HAZOP and Constructability reviews.
Interactions with inter disciplines and external agents viz. Client, contractors, vendors.

Desired Candidate Profile
Self Starter type, reliable having organizing capabilities.
Good Working attitude and team player.
Project execution (planning budgets, schedule and quality) skills having high personal standards.
Have excellent oral and written communication skills in English.
Must have Leadership and decision making abilities.
Good Mentoring and coaching skills.
Capable of handling independently all the Responsibilities.

Company Profile
We are IAP Company Limited, an ISO 9001:2000 certified, Software Development & Software Solution provider - with major operations in Tokyo (Japan) and New Delhi, Gurgaon (India). Our company ethos is led by the Japanese drive for efficiency and productivity.
We aspire to achieve Japanese quality and perfection whilst leveraging on the highly skilled human resource pools from both Japan and India. We currently employ over 350 people (100+ in Japan, 250 in India) - later this year the numbers will exceed 600.
IAP has been chosen as a preferred IT partner with several Global Corporates for services in the areas of IT Consulting, Software development (on Java, Microsoft, Mobile, embedded and security besides others), software products and IT support, Maintenance and Management.
We work in Japan and India with several global Corporates like NTT Communication, NEC Corporation, Sanyo, Sony, Nikko Cordial, Alpine, Metro International, Portwise A.B., Xerox, Hewitt and many others.

Executive Name: Praveen

Address:
Not Mentioned

Email Address: praveen.jha@iaccess.co.in

Telephone: 9899614352

Reference ID:
Lead Engg

[kalathiya87]

ALPESH B. KALATHIYA
E-MAIL :alpesh_kalathiya AT yahoo.com
kalathiya87 AT gmail.com
MALE, 23 YRS
EDUCATIONAL QUALIFICATIONS :
Post Graduation Diploma(August-2008 to November-2008)
PGD in Piping Design Engineering & Construction with FIRST CLASS from Trinity Academy of Professional Training, Pune.
Bachelor of Engineering (Mechanical) (June-2008)
Completed graduation in the B.E.Mechanical with FIRST CLASS from Government Engg. College of Surat, Veer Narmad South Gujarat University, Aggregate 61.02%
H.S.C. (Science) (April-2004)
Passed Higher Secondary School Certificate Examination from Gujarat Secondary & Higher Secondary Education Board with the 66.66%
S.S.C (May-2002)
Passed Secondary School Certificate Examination from Gujarat Secondary Education Board with the 79.89%
SOFTWARE KNOWLEGDE :
o I am Completed PDS Training in CAD Star Engineers Solution Pvt Ltd.(Libra Processtech pvt. Ltd.)
Module :- Equipment Modeling.
Framework Modeling.
Piping Designer.
Isometric Extract.
GAD.
o Good Commanding on Auto-CAD(Completed From BCM,Surat).
o Good Knowledge about CAESAR-II (Piping and Element modeling with STATIC analysis) & CAD Worx P&ID 2007.
o Good Commanding on Pro-E WF-3 (Completed From VAST Academy,Surat)
Module :- Drafting.
Solid Modeling.
Sheet Metal Works.
Assembly.
TECHANICAL SKILLS :
Proficient in :-
o Preparation of G.A Drawings and Isometrics based on P&ID and plant layout.
o Zero/Intermediate/Bulk level MTO.
o Piping Material Selection/Specification/Valve Data Sheets.
o Pressure design of Process Piping and Component as per ASME B 31.3 [Straight Pipe, Flanges, Elbows and Miter bends, Reinforced branch connections, Blanks, Blind flanges, Expansion joints].
o Static and Dynamic analysis of piping systems (Sustained loads, Occasional loads & Expansion loads) Piping and Pipelines .
o Design of Fire safety and Chilled water piping.
o Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning.
Knowledge of :-
o PFD and P&ID
o Equipment drawings
o Plot plan
o Process plant layout
o Piping Welding, Erection & Testing.
Familiar with :- International Design codes & Dimensional standards.
Viz : ANSI/ASME, API, BS, ASTM & other use in design,analysis and calculation.
TOPIC OF PROJECT :
“Design & Analysis of Pressure vessel (Air Receiver)”
Description : -
Type of Air-Receiver selected is horizontal, cylindrical with dished ends and stationary vessel. Design of Air-Receiver is based on ASME section VIII-division I, edition 2007. Capacity of Air-Receiver is 2 m3 (2000 liters) nominal volume.
It is a pressure vessel used to handle compressed air. Its position in the plant is after compressor and before turbine to store high-pressurized fluid to avoid impact on turbine and to supply compressed air regularly.
SEMINAR REPORT :
“Ratchetting In Pipe”
EXPERIENCE :
1.)Company :- Inel Gas Controls Pvt. Ltd.,Baroda
Profile :- Company is ISO 9001-2008 Certificate Holder
:- Company is Involved in Design & Manufacturing of Natural gas,Nitrogen etc. Filtering & Metering Skid for Plant,City Gas Distribution and Cross Country Pipe line project.
Position : - As Project Design Engineer.
Duration :- 05/12/2009 to till date
Responsibility :-
o Preparation of P&I Diagram as per Client Requirement and Process Condition
o Preparation of Piping Routing,G.A Drawings,Base Frame,Spool Drawing,Equipment Drawing and Isometrics based on P&ID
o Preparation of Zero/Intermediate/Bulk level MTO,Piping Material Selection/Specification/ Valve Data Sheets,Bill Of Material,PFG etc.
o Filter Designing as Per ASME Sec VIII Div. 1
o Preparation of Documents (E.g.Sizing Calculation of Filter,PSV,CRV,PCV etc.,Velocity & Noice Calculation for Skid)
o Take Approval of Technical Documents from Client and Issued for fabrication.
o Final Technical Documents Submission to Client within time.
o Prepare Production Planning.
o Give Technical Document Approval For all Brought Out Items to all Venders.
o Prepare QAP for MRS Skid.
o Prepare Project Costing.
2.)Company :- Yes Power & Infrastructure Limited,Savali
Profile :- Company is U,S,R,PP Stamp & ISO 9001-2000 Certificate holder
:- Company is Involved in Manufacturing of Non-IBR & IBR Boilers, Tanks, Heat Exchangers, Pressure Vessels, Stacks, Non-pressure Parts, Boiler, Piping & Structures
Position :- As Mechanical Engineer in Piping Department
Project :- L&T- Jacketed Piping Spools (3/4” To 14”) for IOCL,Baroda
Kilburn-Condetion Tank ( Pressure Vessel)
Thermax- Decoking Tank ( pressure vessel ) for IOCL.
Technip KT India-Piping work (3/4” To 4”)
Punj Lloyd- Structural Pipe Rack for IOCL,Baroda.
Duration :- 01/12/2008 to 01/12/2009
Responsibility :-
o Inspecting QC Activities in piping,Witnessing & Inspecting of Fit up,Weld Visual, Surface Profile,DPT,Hydrotest & Mechanical Clearance.
o Preparing Hydrotest Packs & RT offering.
o Preparing stage documents for QA/QC activities.
o Prepare B.O.M For Purchase.
o Plan for in-house Production & Subcontracted items.
o Keep watch on Production,Check the Quality Of Parts & Assembly.
o Co-ordination with Purchase with Dept. as per Requirement.
o Maintain Safe working practice, systematic planning, process control, process calculation.
o Co-ordination with TPI Inspector.
o Estimation of material requirements.
ADDITIONAL INFORMATIONS:
o In N.C.C., completed B-certificate with B grade.
o Vocational training in Aalidhra Textool Engineers pvt.ltd.
o Project related Industrial visit in L&T (Hazira).
PERSONAL DETAILS:
Father’s Name : Bhavanbhai V. Kalathiya
Father’s Occupation : Farmer
Date of Birth : 04th February 1987
Permanent Address : 302/Ravi Raj Apt.,
Hira Baug,
Varachha Road,
Surat-395006.( Gujarat)
Pass Port Detail : P. P. No:G7062657
Phone Number : 0-9913298150
HOBBIES:
- Drawing, Photography & Travelling.
PHONE: 09913298150
E-MAIL: alpesh_kalathiya AT yahoo.com

[Guest]

CURRICULUM-VITAE

Jagdish Chandra.
E-Mail :-jagdish3687 AT gmail.com
JOB OBJECTIVE
To work with entrepreneurial zeal on innovative and challenging assignments that will hone my educational skills and will provide me with a platform for advancement in the profession.

ACADEMIC QUALIFICATION
- Intermediate from Uttrakhand Bord in 2004.
- High school from Uttrakhand Board in 2002.
PROFESSIONAL QUALIFICATION
- I.T.I. Mechanical Draughtsman Govt. Industrial Training Institute, Almora (Uttrakhand) with 79% (2004-06)
- One Year Apprentiship Tata Chemical Ltd. Mithapur (Gujarat) with 60% (2007-08)
COMPUTER SKILL
- AUTO CAD, (2008,2009.2010 & 2011)
- 3D DESIGNING.
- MS-WORD, EXCEL.
DESIGNING
- AutoCAD, 3D, ERP
PRESENTLY WORKING
- M/s Micro Precision Products (P) Ltd.
3 Link Road, Sector-28, Faridabad
From :-January 2011 to Till Date.
WORKED
- M/s STEAM TECH ENGG.
Rajkot (Gujarat)
From :-October 2008 to December 2009.
WORKED
- M/s M.R. ENGINEERS
Preet Viahr, (New-Delhi)
From :-May2010 to December 2010.
WORK EXPERIENCE & PROFILE :-
- Details Drawing Orifice Plate, Orifice Flange, Venturi, Flow Nozzle Assemblies,Ducting, Meter Run etc.
- Inspection & Measuring of parts on site, by using measuring instruments, eg. Vernier, Micrometer.
- P & ID (Piping & Instrumentation Diagram)
- Plumbing Drawing.
- Isometric Drawing.
- 3D Designing.
- ERP (Software)