Adyard Abu Dhabi UAE : Piping QC Inspector

[Admin]

Adyard Abu Dhabi
http://www.topazworld.com

Keywords: Quality

Designation: QC Inspector-Piping
Experience: 5 - 10 Years
Location: Abu Dhabi UAE
Education:
UG - Any Graduate - Any Specialization;Graduation Not Required
PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Production, Maintenance, Quality
Posted Date: 04 Oct 2008

Job Description
-Conducting inspections as per ASME Sec II A , B, C / ASTM standards / European standards / NACE standards.
-In depth Knowledge of material & its properties.
-In depth knowledge of material management system like JDE / BAN etc.
-Knowledge of Non destructive & destructive testing & methods.
-Ability to select & recommend alternative materials.
-Exposure to SQC techniques for inspection..

Desired Candidate Profile
-Basic - Bachelor of Technology/Engineering ( Mechanical , Production/Industrial ) , Diploma , PG - Master of Technology/Engineering
-Dip + 10 years exp / Degree + 6 years experience in quality control department of reputed in offshore structure fabrication company /EPC Company .
-Inward raw material inspection as per purchase order & client specification.
-Coordination with TPI & clients for material acceptance.

Company Profile
Topaz as Engineering Division has four major business verticals viz, O&G Fabrication and Construction, Ship Repair, Ship Building & Maintenance Services and has it has physical presence in Abu Dhabi, Dubai & Fujairah. These businesses cover an area of approximately 250,000 Sq meters and boast of state of the art infrastructure, a dedicated and skilled team of nearly 5,000 people in different businesses and the latest technological solutions which integrate these businesses & enable us to run these businesses effectively. The Engineering division has seen a rapid growth in the last 3 years having quadrupled its turnover in the year 2007 as compared to 2005 and the projected turnover for 2008 is expected to be in the range of USD 165 Million.

Executive Name: Recruiter

Address:
Not Mentioned

Email Address: hr@adyarduae.com

Telephone: Not Mentioned

[Guest]

Sir,
I am working in Maritime Industrial Services (MIS) Sharjah as a QC Inspector-piping and pressure vessels etc. I am having a total experience of 07 years and 05 years in Maritime Industrial Services (MIS) Sharjah and 02 years in India.I would like to join with you,my qualifications are as follows

1) 03 years engg.diploma with distinction
2) CSWIP certified welding Inspector
3) ASNT–TC-1A Levell II in RT,UT,MT,PT
4) Basics of the Code Book Usage, ASME SEC.VIII Div1 (MAB, Dubai, U.A.E.)
5) Basics of the Code Book Usage, ASME SEC.VIII Div2 (MIS, Sharjah, U.A.E)
6) Sea survival training (GTSC Abudhabi)
7) Fire fighting Training (MIS Sharjah, U.A.E)
8) H2S Training (SUNBELT Dubai)


regards,
vijayan
E-mail - ng.vijayan AT yahoo.com

[Guest]

RESUME
S. MAHESH
Email : mahesunqc AT gmail.com
Objective
WELDING INSPECTOR
To serve in an organization that develops my skill and utilizes my trait to the maximum.
Technical Qualification
- CSWIP 3.1 from The Welding Institute, U.K.(Certificate No.49581, Exp Dt : 23.07.2015)
- Magnetic Particle Testing ASNT Level II
- Liquid Penetrant Testing ASNT Level II
- Ultrasonic Testing ASNT Level II
- Radiographic Testing ASNT Level II
- RTFI ASNT Level II
Educational Qualification
- Bachelor of Engineering (Mechanical) Annamalai University
Chidambaram, Tamil Nadu, India.
Computer skill :
- Microsoft office, Microsoft windows
Summary of Experience
A qualified QC Piping / Welding having about 5+ years of experience in Petrochemical, Chemical, Power plant construction. Knowledge in Quality manuals, policies, procedures, inspection and testing plans on major projects. Well versed with codes and standards leading to the success of all projects under taken.
Professional Experience
COMPANY : SALAM-RBG Middle East, QATAR
DURATION : MAY 2011 (ONE MOUTH) SHUT DOWN
POSITION : WELDING INSPECTOR
CLIENT : RAS GAS QATAR.
Responsibilities :
- Responsible for Quality Control inspection of all pipes ,fittings ,joints, valves equipments and support installation
- Studying the piping and instrument diagrams (P & IDs) and identifying the pipelines and systems
- Monitoring welder performance and repair rates of each welder in accordance with job quality and code requirements.
- Supervise, Inspects and lead QC activities on installation of external and internal components of Columns, Pressure Vessels and Heat Exchangers.
- Visual inspection of fit –ups filet welds, butt welds, seal welds &various techniques in welding
- Making status reports and co-ordination with, welding, planning and inspection.
.
COMPANY : NAGARJUNA CONSTRUCTION COMPANY LIMITED
DURATION : APRIL 2010 TO APRIL 2011
POSITION : WELDING INSPECTOR
CLIEN : INDIAN OIL COMPANY LIMITED REFINERY SITE
(ORISSA)INDIA
Responsibilities :
- Inspection of fit-ups, weld preparations and completed welds.
- Monitoring of welding parameters while welding.
- Carried out penetrant inspection and magnetic particle inspection.
- Coordination with client representatives.
- Visual inspection on finished weld appearance, weld size, weld length, dimensional accuracy & hardness test of weldments, preparation of all inspection reports submission to client & maintain company’s inspection filing system.
- Control of Electrode storage (Indenting, Receipt, Inspection, Storage and issues of welding consumables.) Responsibility of Allocation welders/ welding operators.
- Field check for monitoring correct parameters like welding current, voltage
- Implementing the approved Weld Procedure, Supervise all welding personnel and ensure their
- Preheat, inter pass temperatures are in limits of approved WPS
- Competence. Ensure that all the welders are approved for the welds they have to perform.
- Qualification of welders, Procedure qualifications according to ASME Sec IX .
COMPANY : ZEPPELIN GULF SAUDI ARABIA
DURATION : MAY 2009 – APRIL 2010
POSITION : WELDING INSPECTOR
CLIENT : NCP &DAELIM SAUDI ARABIA.
Responsibilities :
- Inspection of fit-ups, weld preparations and completed welds.
- Monitoring of welding parameters while welding.
- Carried out penetrant inspection and magnetic particle inspection.
- Co-ordinate with the welding foreman, NDT personnel, Coating Personnel for the completion of the job.
- Witnessing hydro tests, pneumatic tests dye penetrant inspection, magnetic particle inspection and evaluating radiographic films
- Inspecting fit up of joints for material surface, root gap, bevel angle as per established WPS and visual inspection of finished welds
- Checking of welding sequences which has to be followed to avoid distortion
- Preparation of daily welding reports
- Coordinating with clients in their inspection activities
- Carrying out visual inspection before, during and after completion of welding.
- Identifying the NDE and Heat treatment requirement on welding.
- Checking all welding activities are in compliance with the applicable code, standards and specification
- Checking that the welding procedure to be used are approved and duly qualified as required
- Inspecting fit up and visual inspection of the welding
- Witnessing the hydro test of piping of superstructures and NDT activities
- Radiographic film review of joints and checking PMI reports
- Witnessing of load test for superstructures and report preparation
- Verification for right welding consumable materials for each installation as per requirement in welding procedure
- To ensure that only calibrated equipment/instrument were used in the project and proper calibration records are maintained.
- Providing technical support to production team, inspection of material traceability, joint preparation
- Coordinating with third party as well as client related to all inspection activities
COMPANY : SAUDI EUROPEAN PETROCHEMICAL (IBN ZAHR)
DURATION : FEB 2009 TO APRIL 2009 (SHUT DOWN)
POSITION : QC INSPECTOR / NDT INSPECTOR
LOCATION : JUBAIL-SAUDI ARABIA
Responsibilities
- Inspection of incoming materials identification, visual and consumable verification. In-process welding inspection, visual inspection and final dimensional verification.
- Verification of test mill certificate and incoming material certificate.
- Monitoring the welding activities as per WPS and quality system procedures, Positive Material Identification Test (PMI)
- Coordination with NDE and HT crew to carry out required test on the weld joints and evaluation of test results.
- Blasting and painting stage inspection, thickness verification, visual inspection and final clearance.
- Co-ordinate with client inspector for inspection activities and documentation.
- In-process welding inspection, visual, dimensional checking and report preparation.
- Preparation and final submission of test pack as per client requirement.
COMPANY : RELIANCE ENGINEERING SERVICES, CHENNAI.
DURATION : MAY 2006 TO DECEMBER 2008
POSITION : QC INSPECTOR
Responsibilities
- Radiographic film interpretation and evaluation in compliance with relevant codes.
- Coordination with NDE and HT crew to carry out required test on the weld joints and evaluation of test results.
- Carrying all kind of NDT methods independently and Interpreting test results to various standards.
- Radiography joint offering and coordination with sub contractor.
- Witnessing of dye penetrant inspection, magnetic particle inspection and ultrasonic inspection.
- Radiography of structural, Pipe & Tank welds
- Radiography Film Interpretation & Reporting
- Magnetic Particle Inspection & Reporting.
- Dye Penetrant Inspection & Reporting.
- U.T. Inspection & Reporting.
- RT offering as per line NDT status and film interpretation .
- Carrying all other NDT activities like PT, MPI and UT.
- Prepare the documents for the QC activities and test packages. Updating all NDT report and prepare the test packages status and progress reports.
- Checking and preparing as-built revision drawing of isometric drawing and P&ID

[Guest]

CURRICULUM VITAE
SARATH SADANAND
E Mail : sarathsadan AT gmail.com
OBJECTIVE
To be associated with a progressive organization that gives a challenging position with an opportunity for growth and development
EDUCATIONAL QUALIFICATIONS
- Diploma in Mechanical Engineering passed in 2002 from Thiagarajar Polytechnic Alagappanagar, Thrissur, from Board of Technical Education, Kerala State, India
- S.S.L.C passed in 1999 from St :Thomas High School Thiroor, Thrissur, from Board of Technical Examinations, Kerala State, India
PROFFESSIONAL CERTIFICATIONS
- CSWIP 3.1 Welding Inspector –The Welding Institute (TWI)
Certificate No : 38678
- ASNT LEVEL II Ultrasonic Testing
- ASNT LEVEL II Radiographic Testing
- ASNT LEVEL II Liquid penetrate Testing
- ASNT LEVEL II Magnetic particle Testing
- ASNT LEVEL II Visual Inspection
COMPUTER KNOWLEDGE
- DRAWING PACKAGE – AUTO CAD 2000
- OFFICE PACKAGE – M S OFFICE
EXPERIENCE
- Presently Working as Piping QC Inspector for Saipem Eni in Dubai (Drydocks World) for the Conversion of LNG Carrier "Golar Frost" to FSRU LIVORNO.
- Worked as a Piping Engineer in Dubai (Drydocks World) for the SPS of Semi-submersible Rig PRIDE VENEZUELA. (Owner representative)
- Worked as a Structural Engineer in Bahrin (ASRY) for the SPS of JACK-UP RIG PRIDE NORTH MONTANA. (Owner representative)
- 2 Year Worked as a Welding and Piping QC in Dry Docks World – Dubai from October 1st 2007 to October 1st 2009.
- 3 Year Worked as a Welding and Piping QC in Spectrum International LLC, Dubai – U. A. E. (from April 2004 to September 2007).
- 2 Year Worked As A Welding and Piping QC Engineer in Engi Techs, Irimpanam, Cochin, kerala, India. (From May 2002 to March 2004).
RESPONSIBILITIES / DUTIES / EXPERTISE
- Capable of reviewing/identifying hold /witness/ % of witness / surveillance/ document review points in the Inspection Test plan (ITP) as well as well familiar with Quality Control Plan (QCP) which generates from main contractor (EPC)
- Familiar with PQR package which should be reviewed before qualification of the WPS.
- WPS (Welding Procedure Specification) reviewing/and approval of WPS.
- Experienced with Mechanical completion walk down (MCC)of piping systems
- Capable of reviewing test packages for pressure test release.
- Witnessing /Monitoring pre, in-process, final Welding of Tie –In joints on the behalf of Owner
- Review of weld and line description table based on piping class.
- Familiar with weld maps / wps index
- Witness welder performance qualification Test (WPQT) as per ASME SEC-9 and as well as WQT Record reviewing to see the actual tested and range qualified.
- Familiar with job clearance card (JCC) issuance to welders based on the range qualified
- Capable of preparing project weld report (initial & production)
- Capable of coordinating group inspectors to achieve project quality requirements.
- RFI notification to the client as per the ITP followed and Releasing of Hold/Witness Point.
- Familiar with shop fabrication, erection of spools as well with site runs also.
- Review of project weld report as well as tool box meeting co-ordination to achieve weld rejection rate (WRR) with in the specific project targets.
- Witness PT/MT Inspection of The Root And Final In Penetration Weld & Seal Welds as per the Code, ASME Sec-8/AWS D1.1
- Pre Heating, Post Heating, Stress Relieving Activities And SR Chart Verification, In Carbon Steel, Low Alloy Steel Welding
- Review of PWHT chart verification as well NDT reports.
- Review of RT films/Radiography Interpretation as Per ASME Section Viii Division I appendix 4 (rounded indication) of the Boiler & Pressure Vessel Laboratory Witness of mechanical testing as well hardness testing
- Re-drying / Baking Schedule of Low Hydrogen Electrodes according to the Tensile Grades, verification of the consumable control register.
- Familiar with Line History Documentation, Mechanical Clearance of Loops
- Review of hydro package and punch list preparation.
- Card Board Blasting, Flushing and Hydro testing Of Pipe Loops.
- Familiar with Different Welding Techniques like GTAW/SMAW/GMAW/SAW/FCAW As well As Electrodes & Filler Wires.
- Capable of checking pre- painting conditions like RH (relative humidity),dew point temperature, surface temperature
- Review of MTC as well Batch certificates of consumables/electrodes/fluxes.
- Familiar with isometrics, GA drawing, P &ID etc.
NEW BUILDING PROJECTS

1. PROJECT : Construction of AKER H-6 DRILLING RIGS
CLIENT : Aker Kvaerner Stord As
CLASS : Det NorskeVeritas (DNV)
2. PROJECT : Construction of WG TASWAN 1
SEISMIC RESERCH VESSEL
CLIENT : ULSTEIN
CLASS : Det NorskeVeritas (DNV)
3. PROJECT : Construction of WG COOK
SEISMIC RESERCH VESSEL
CLIENT : ULSTEIN
CLASS : Det NorskeVeritas (DNV)
4. PROJECT : Construction of POLARCUS NADIA
SEISMIC RESERCH VESSEL
CLIENT : POLARCUS
CLASS : Det NorskeVeritas (DNV)
5. PROJECT : Construction of POLARCUS NAILA
SEISMIC RESERCH VESSEL
CLIENT : POLARCUS
CLASS : Det NorskeVeritas (DNV)
CONVERSION PROJECTS
1. PROJECT : Floating Production Storage Offloading (FPSO) FRADE
Construction of CHEVRON
CLIENT : SBM
CLASS : American Bureau of Shipping (ABS)
2. PROJECT : Floating Production Storage Offloading (FPSO) KNOCK ALLAN
Construction of OLOWI
CLIENT : FRED OLSEN
CLASS : Det NorskeVeritas (DNV)
3. PROJECT : Floating Production Storage Offloading (FPSO) GIMBOA
Construction of SAIPEM
CLIENT: SAIPEM
CLASS: American Bureau of Shipping (ABS)
4. PROJECT: Floating Storage Offloading (FSO) TI ASIA
Construction of EURONAV
CLIENT: OSG
CLASS: Lloyd’s Register (LR)
5. PROJECT: Floating Storage Offloading (FSO) TI AFRICA
Construction of EURONAV
CLIENT: OSG
CLASS: Lloyd’s Register (LR)

[Guest]

Karthik.G
E-mail : amrimech AT yahoo.co.in

OBJECTIVE :
To put my best in any work I undertake thereby helping in the development of the organization.
EDUCATIONAL QUALIFICATION :
- B.E – Mechanical Engineering – Amrita Institute of Technology & Science, Coimbatore (2005). – 71.8%.
PROFESSIONAL COURSES :
- Completed Plant Design Management System (PDMS) and Computer Aided Engineering and Stress Analysis Report (CAESAR-II) for Piping in Kagira Drawing Solution, Perungudi.
- AWS Certified Welding Inspector
- ASNT Level II in (RT, UT, MPT, PT)
PROFILE#1
Company : KAZSTROY SERVICE INFRASTRUCTURE INDIA PVT. LIMITED
Position : Deputy Manager – QA/QC
Duration : Jan 2011 to till date
Client : Indian Oil Corporation Limited
PMC : Foster Wheeler
Project : Paradip Refinery Project
Responsibilities :-
- Preparation, implementation, monitoring and updating of KSS’s ITP, QC procedures and instructions.
- Ensure that all work procedures are duly approved before commencement of the job.
- Responsible in assisting, the internal and external audits are carried out as per the audit schedule and follow up for the close out of NCR issued.
- Responsible to raise deviation permit, if any activities to be carried out at site against project specification.
- Ensure that the measuring and monitoring devices used shall be duly calibrated and within the accuracy requirements of project specifications.
- Identify and record the site problems related to the quality issues.
- Responsible for ensuring as-builts are prepared by draughts man as per the inputs given by construction engineer / supervisors.
PROFILE#2
Company : Punj Lloyd Ltd, Qatar
Position : QC Inspector
Duration : march 2009 to July 2010
Project : Jet Fuel System Pipeline
Client : Overseas Bechtel Inc.
Responsibilities :-
- Preparation and Review of test pack for pneumatic testing.
- Witness Pneumatic Testing of Pipeline.
- Preparation and Review of test pack for hydro testing of HDPE pipeline
- Witness Hydro Testing of HDPE Pipeline.
- Inspection of project incoming material as per specification, test certificate, standards and material substitution and get approved from Client.
- Inspection of Static equipment (underground tanks, pressure vessels etc.) installation and alignment as per approved drawing.
- Inspection of Rotary Equipments (Pumps etc) installation and alignment as per standards, method statement, ITP and approved drawing.
- Inspection of Pump preservation and maintaining the record.
- Witness tension test of bolts for structural steel erection.
- Visual Inspection of Piping and Structural Fit up and welding.
- Inspection of Pipe routing and Pipe support as per approved drawing.
PROFILE : 3
Company : Tebma Shipyards Ltd, India
Position : Engineer (I &QC)
Duration : Aug 2005 to mar 2009.
Project : Platform Supply Vessel
Client : Cochin Shipyard Ltd.
Responsibilities :-
- Monitor Welder’s Performance.
- Monitor Sub contractors’ activities.
- Coordinate with NDT activities.
- Witnessing of Pressure Testing of piping systems
- Visual Inspection of Welding.
- Fit up inspection of weld joints as per approved Drawings.
- Monitoring handling of consumables and welding
- Witnessing of NDT activities like MPT and PT.
- Carried out Load line and LSA & FFA survey.
- Carried out Underwater structural outfit inspection activities.
- Coordinate with the client representative for clearing all inspection activities related to ship delivery.
- Maintain quality records as required by the quality control plan
- Planning the weekly work schedule.
- Carried out Fabrication works as per approved drawings.

[ashishmistry46@yahoo.com]

CURRICULUM VITAE
ASHISH R. MISTRY
ashishmistry46 AT yahoo.com
Application for the Post of : - QA/QC ENGINEER
Total Experience : 2.5 Yrs & Above
OBJECTIVE :
To pursue a challenging, responsible and rewarding career in a growing, leading and global company
and contribute effectively in accelerating its growth and development.
ADDTIONAL QUALIFICATION :
NDT LEVEL II ( RT,UT,PT,MPT )
(American Society for Non Destructive Testing)
Institute : INNOVATIVE NDT Training Institute, Adajan.
ACADEMIC QUALIFICATION :
Sr,No
Course
Institute
Month & Year of Passing
Percentage
1
D.M.E Vidya bharti poly tech. trust, umrakh. Surat
Dec-2008
58.42%
2
S.S..C Shree swaminarayan vidya mandir, ladvi. Surat
March-2005
66.43%

PREVIOUS JOB PROFILE :
- Company Name : LARSON & TOUBRO. LTD, HAZIRA
(FAB.TECH ENGINEERING COMPANY)
Projects : A.C.N. REACTOR

Client : ASHI KASHI PETROCHEMICAL LTD. THAILEND
Role : QA/QC ENGINEER.
Duration : From 03.04.2009 To 12.04.2010
- Company Name : MODY TECHANICAL CONSULTANCY(INDIA)PVT LTD, ADAJAN.
Projects : MEGIII PLANT (PEO) Project.
Client : Reliance Petroleum Limited. Hazira
Role : INSPECTION ENGINEER.
Duration : From 01.08.2010 To 30.06.2011.
- Company Name : MODY TECHANICAL CONSULTANCY(INDIA)PVT LTD, ADAJAN.
Role : INSPECTION ENGINEER
Duration : From 01.08.2010 To Till date.

RESPONSIBILITIES :
- Ability to learn quickly, hard working and punctual.
- Self-disciplined and goal-oriented.
- Excellent communication and interpersonal skills.
- Ability to work in-groups.
- WORK PROFILE
- Familiar with ASME B31.3, Sec V, IX, Codes, Standards.
- Fit up & Weld Visual Inspection for all pipes and structural’s.
- Verify that the inside of pipes is cleaned prior to welding
- Selection of WPS for all weld joints in the spool or pipe line
- Check proper backing of electrode as applicable
- Welding application with various processes i.e., SMAW, GTAW, GMAW and SAW.
- Witness for Pre-heating ,Post heating and Post Weld Heat Treatment of weldments and pipe.
- Witness of MPT,DPT,RT,UT
- Material identification with the help of P.M.I analyzer M/c
- Execution of piping works like spool fabrication and inspection at various stages from material identification to dispatch to erection site
- Inspection of Piping-system wise and verification according to Isometric Drawing.
- QA/QC Document : Welder performance record, WPS, Incident log resister
- Welder Qualification and verification of WPS & PQR as per ASME Sec IX.
- Verify and ensure that all field Welds are free from visual defects as per the project specification
- Determine whether the defective welds are repaired as per the specification
- Verify that the inside of pipes is cleaned prior to welding.

AREA OF INTEREST :
- Fabrication
- Structural
- Piping

[Guest]

MICHAEL T. DOLOR
Email address : michaeldolor22 AT gmail.com

SUMMARY OF QUALIFICATIONS :
Registered Mechanical Engineer with seven and a half (7.5) years work experience in Quality Control Inspection of Boiler and Pressure Vessel, HRSG, Piping, Ducting and Structural Parts of Power, Oil & Gas Industrial Plant in accordance with Codes and Standards.

NDE qualification (PT, VT and MT Level II as per ASNT-TC-1A)

DESIRED POSITION : QA/QC ENGINEER/ QC PIPING AND WELDING INSPECTOR

WORK EXPERIENCES :

COMPANY : BABCOCK- HITACHI (PHILIPPINES) INC.
San Roque, Bauan, Batangas, Philippines
POSITION : QC ENGINEER III
PERIOD COVERED : June 3, 2004 up to present

JOB DESCRIPTION :

1. Conduct material receiving inspection, lay-out inspection, fit-up inspection, welding inspection, visual & dimensional inspection and final inspection on fabrication of the following component such as Boiler and Pressure vessel, Water wall Panels, Headers, Tube coils, HRSG, Piping, Ducting, Structural Parts of Power and industrial plant.
2. Conduct site inspection and perform NDE activities such as PT, VT and MT.
3. Witness hydrostatic test in accordance w/ ASME Code, METI Code and work instruction.
4. Prepare Inspection and Test Report in accordance with Inspection and Test Plan, such as Material Traceability Report, Edge preparation record, Welding Data Record, NDE report, Hydrostatic test report, Dimensional/Visual examination records.
5. Conduct presentation of products witnessed by Authorized Inspector or Customer.
6. Cooperatively prepare the Process Control List (PCL) with Operations Department, indicates inspection/hold points requirement for inspection.
7. Indicate RT requirements on Planning Drawing before issuance of Fabrication drawing.
8. Review of Material Test Report, Pipe cutting plan, PWHT Chart and Welding Record.
9. Prepare Manufacturers’ Partial Data Report , ASME (MDR)

COMPANY : BABCOCK-HITACHI (PHILIPPINES) INC.
San Roque, Bauan, Batangas, Philippines
POSITION : INTERNSHIP TRAINEE (Production Engineering Section)
PERIOD COVERED : June 18, 2002 ~ September 20, 2002
TRAINING ATTENDED :
1. WELDING ENGINEER TRAINING COURSE
By Japan Welding Engineering Society (JWES) and Philippines Welding Society (PWS)
General Santos Avenue ,Bicutan, Taguig City Philippines
January 9, 2012 to January 14, 2012

2. BABCOCK-HITACHI K.K. KURE DIVISION ( BHK )
Takara-Machi, Kure-Shi, Hiroshima-Ken, Japan
July 10, 2006 ~ August 04, 2006
- Undergone training related to implementation of BHK Quality Control System

SITE PROJECT ASSIGNMENT :

1. ELM ROAD GENERATING POWER STATION
11050 S. Chicago Rd. Oak Creek, Wisconsin 53154 USA
May 2008 ~ August 2008 and October ~December 2008
- Site inspection and Assist Hitachi America and BHK members in monitoring of progress status during construction works for Power Plant in Wisconsin.

2. KOGAN CREEK POWER STATION
Chinchilla, Queensland, Australia
October 14, 2007 ~ December 10, 2007
- Assist (CBH) Australia and BHK Japan in commissioning activity of Power plant.

SEMINARS ATTENDED :

FEBRUARY 24, 2006 FORUM ON BOILER OPERATION AND RELATED TOPICS
Conducted By : BABCOCK- HITACHI (PHILS.)INC.
Engr. Fernando B. Urbanozo
Bolbok, Batangas City
MARCH 17 ~21, 2005 IN-PANT SEMINAR ON WELDING PROCEDURE SPECIFICATION (WPS) IN ACCORDACE WITH ASME CODE
Conducted by : HSBCT Representative
Mr. Carl Francen.


DECEMBER 7, 2002 GAS TURBINE
Conducted By : SIEMENS POWER INC.
Engr. Nestor S. Manalo
Batangas State University, Campus II

MAY 8, 2001 INSTRUMENTATION AND CONTROL
Engr. Enrique Marcellana
Batangas State University, Campus II


GOVERNMENT AFFILIATION : Registered Mechanical Engineer (2003)
Licensed No. : 0062449
PRC, Manila, Philippines

: Member of Philippine Welding Society (PWS)

SCHOLASTIC RECORD : BATANGAS STATE UNIVERSITY
(Formerly Pablo Borbon Memorial Institute of Technology)
Alangilan, Batangas City, Philippines
Bachelor of Science in Mechanical Engineering
1998~2003

CHARACTER REFERENCES :
ENGR. GERONIMO C. DUCUSIN
QC SECTION MANAGER
BABCOCK-HITACHI (PHILS.) INC.
San Roque, Bauan Batangas

ENGR. REYNILO J. LACSAMANA
QA DEPARTMENT MANAGER
BABCOCK-HITACHI (PHILS.) INC.
San Roque, Bauan Batangas

I hereby certify that the above information is true and correct to the best of my knowledge and belief.


MICHAEL T. DOLOR
Applicant’s Signature