www.tacogroup.com Tata Johnson Controls Automotive Ltd Pune : CAD Engineer Catia

[Admin]

Tata Johnson Controls Automotive
tacogroup.com

Designation: Executive-Engineering(cad engineer)
Experience: 3 - 5 Years
Location: Pune

Job Description
- Conceptualizes designs and models the parts and assemblies using 3D CAD software and assists Lead engineers in meeting the timely releases, keeping cost targets and quality in mind.
- Receives the inputs from suppliers, prototype group, testing group in finalizing the designs.
- Demonstrates general understanding of comfort, ride and ergonomics and applies this in Product Design.
- Understands and uses extensively all seat safety standards, material specifications and seat related manufacturing practices.
- Provides innovations in arriving at new designs and solutions to end customers.
- Follows BOS / PLUS procedures and customersâ specific
requirements (TS 16949) while designing the parts.
- Displays good ability in communication and teamwork with internal and external customers.
- Meets specific department objectives established by the organization through the Engineering Manager and GM (Engg.)
- Shares the knowledge with Other Cad Engineers and new recruits.
- Assists prototyping / Trim Development groups during the DV Build.
- Maintains good Housekeeping / discipline in work area.
- Takes part in activities like suggestion, changes, Kaizen Six Sigma, and various committees and organizational initiatives.

Desired Candidate Profile
Minimum two years experience in Product Design/ Development/ Prototype/Research in an Engineering / Automotive organization
SKILLS
- Designing and Engineering using CAD software
- Computer Literacy
- Communication skill
- Analytical Ability
- Conceptualization Skill
- Presentation Skill

Company Profile
A leading automobile manufacturing company in india.

Email Address: venkat@firstselectindia.com
http://WWW.tacogroup.com

Keywords: GD&T , Catiav5 , part surfacing , part modelling , sheet metal, plastics

[Guest]

CURRICULUM VITAE
MR. KAMBLE SWAPNIL.
Email- swapka20 AT gmail.com
OBJECTIVE
To contribute to organization’s success and productivity through the use of innovative and proactive skills.
ACADEMIC ACHIEVEMENTS
Engineering Qualifications
Course : B.E. (mechanical Engineering)
College : Karmaveer Bhaurao Patil College of Engineering and Polytechnic,
Satara.

Class University/Board Year Marks %
B.E (SEM-I) 2010-11 64.82
T.E 2009-10 59.14
S.E 2008-09 57.59
F.E 2007-08 56.74
Total average up to seven semester = 58.78 %
Pre-Engineering Qualifications

Class College/Institute Board Year Marks (%)
H.S.C Malojiraje sheti vidyalay & junior college,phaltan. Kolhapur 2006-07 64.33
S.S.C. Mudhoji high school & junior college ,phaltan. Kolhapur 2004-05 62.40
TECHNICAL SKILLS
Software’s Known :- 1) CATIA V5R17.
2) AUTO CAD- 2007.
COCURRICULAR ACTIVITIES

1. Projects- Design & manufacturing of hydraulic winch. sponsored by “cyclo transmission.ltd”,satara.
2. 15 days training in “ratna gears pvt.ltd” pune.
EXTRA CURRICULLAR ACTIVITIES
Won third prize in national level “contrazone” in “e-contraption” at Dr.J.J.MAGDUM COLLEGE OF ENGG. jaysingpur.
Third price in CATIA competition in CAT-PRO event at k.b.p college of engg. Satara..
Poster presented on “save a girl child” at “annasaheb dange college of engg. And technology” ashta.
Participation in national level “e-contraption” at k.b.p college of engg. Satara.
Member of “NSS”.
Done course of “yogasana and pranayam”.
Co-coordinator of “singing &dancing competition” in k.b.p college of engg.& poly. Satara.
STRENGTHS
Open mind.
Creative skill.
Honest.

[Guest]

CURRICULUM VITAE
P.V.LOKESH
E-mail : pv.lokesh AT yahoo.com
CAREER OBJECTIVE

To strive for excellence and to work hard towards a challenging position, where I can apply my technical and analytical skills efficiently to place myself in a suitable field, which can provide me an opportunity to explore the infinite possibilities of my field and to use all the gained ability for the growth of the organization as well as my personal growth in the organization.
ACADEMIC DETAILS
Ø Post Diploma in Plastics mould Technology from CIPET (Central Institute of Plastics Engineering and Technology) Ministry of Chemicals & Fertilizers, Govt. of India, Chennai with 74 % of marks during 2004-08 .
Ø S.S.C from Siddhartha public school with 73% of marks during 2003-04.
TECHNICAL SKILLS
Mechanical Softwares : CATIA V5R19
Packages : MS-Office, Windows 2000/XP
WORK EXPERIENCE
Organization : SHAPERS INDIA PVT.LTD
5/4, Nagar Road, Pune-411014
Company Profile :
SHAPERS INDIA PVT.LTD which is the leader in manufacturing of injection moulds .It is the alliance between the SERMO Group and the ZIMMERMANN group with trade name as SHAPERS GROUP. SHAPERS manufacture the mould for many automotive interior components, exterior components, climate system etc for two wheelers as well as four wheelers. Customers of SHAPERS are MARUTHI, VALEO, TATA MOTORS, PLASTIC OMNIUM/VARROC, HONDA MOTORS, FAURECIA and GENERAL MOTORS INDIA etc.
Designation : Design Engineer
Duration : Aug-2008 to till date
MAJOR PROJECTS DONE : Mould For
- MAP POCKET (FAURECIA)
- INSTRUMENT PANEL PROTO (TACO),
- LID GLOVE BOX INR+OTR LHD (VISTEON),
- FR GRILL MESH W408 (VISTEON),
- FRONT BUMPER (MAHINDRA),
- REAR BUMPER (POV),
- BOARD FRT DOOR TRIM RH (MARUTI)
- BEZEL FR LH/RH (MARUTI),
- MAPPOCKET 3D L/R PROTO (FAURECIA),
- MAIN CARRIER 3D LEFT (FAURECIA),
- CACHE LATERAL DET G COM MERU (CA9M077) (FAURECIA),
CURRENT JOB PROFILE & KNOWLEDGE
As a Design Engineer, I am having experience and knowledge in the below mentioned topics.
- Pre study analysis of components
- Modifications in the components
- Designing whole mould
- Raw Material Estimation
- Customer Interaction , regarding project issues
- Rework analysis
- Part modeling, surfacing, and drafting of mold design in “CATIA” & then tool design in the module of “CATIA-ASSEMBLY”.

[Guest]

CURRICULUM VITAE
KISHOR MADHUKAR PATIL

e-mail ID :kishoremadhukar AT yahoo.co.in
kishormadhukar AT gmail.com
__________________________________________________
Objectives :
To work with all Zeal & Efforts for your Reputed Organization with my Confidence and my Knowledge, considering the offer as the best oppurtunity. in CAM seeking for a position that will allow me to continue learning new technology.
Experience :
Company Name : MAGPLASTIC ASIA PVT. LTD.
Hinjewadi,PUNE.
Period : From April 2011 to till date.
Company Profile : Magplastic is a MNC Company orignal equipments manufacture Plastic bloe moulding machine manufacturing. Company having in house production of Blow mould and a commercial tool room with all requirements.
Work Responsibilities :
a) operating of work NC softweare.
b) Maintaining records like time schedule,planning sheet m/c maintenance documents etc.
c) Troubleshooting of minor m/c problems .
d) Preparing for preventive maintenance.
e) Assisting the planning team from operators’ part.
Company Name : MINDARIKA PVT. LTD. PUNE.
Chakan talegaon road,PUNE.
Period : From June 2008 to April 2011.
Company Profile : mindarika pvt ltd is Company and one of the
Major suppliers of TATA MOTORS, G.M, VOLKSWAGEN. RENAULT LOGAN, FIAT, VALEO having in house production of injection mould and a commercial tool room with all requirements for manufacturing of switches mould & press tool.
Work Responsibilities :
a) opreting of del cam.
b) Maintaining records like time schedule, planning sheet. M/c maintenance documents etc.
c) Troubleshooting of minor m/c problems.
d) Preparing for preventive maintenance.
e) Assisting the planning team from operators’ part.
Self profile :
- Trained in various activities.
-
- Able to understand the 2D & 3D drawing.
-
- Skilled in programming of various parts like core & cavity.

Company Name : VIPUL-S Plastocrafts pvt ltd.
Tathawade,PUNE.
Period : From April 2006 to June 2008.
Company Profile : Vipul is a ISO/ TS-16949 Company and one of the
Major suppliers of TATA MOTORS, PIAGGIO, TAPS. Company having in house production of injection mould and a commercial tool room with all requirements.
Work Responsibilities :
a) operating of del cam softweare.
b) Maintaining records like time schedule,planning sheet m/c maintenance documents etc.
c) Troubleshooting of minor m/c problems .
d) Preparing for preventive maintenance.
e) Assisting the planning team from operators’ part.
Self profile :
- Trained in various activities.
- Skilled in drawing - study.
- Skilled in opreting of various parts like core & cavity.
Company Name : FINE DIES&MOULDS pvt ltd,
Bhosari, Pune-26.
Period : May-2003 to March-2006.
Company Profile : FINE DIES&MOULDS pvt ltd is one among the topnotch commercial toolrooms involved in tooling activities catering national and international concerns mainly AUTOMOBILE equipments.
The Company is handling & Serving clients like KALYANI GROUP, MANIKCHAND,TOYOTA,etc.,by manufacturing precision moulds and presstools .

Work Responsibilities :
a) operating of vmc m/c.
b) Maintaining records like time schedule,planning sheet m/c maintenance documents etc.
c) Troubleshooting of minor m/c problems .
d) Preparing for preventive maintenance.
e) Assisting the planning team from operators’ part.
Self profile :
- Trained in various activities.
- Skilled in drawing - study.
- Skilled in opreting of various parts like core & cavity.
COMPUTER SKILL
WORK NC
DEL CAM (power mill)
AUTO CAD
MS OFFICE
EDUCATIONAL QUALIFICATION
:SSC,HSC,ITI
: BE(IIE appear)

[Guest]

PARAMESHWAR BANAKAR
EMAIL : pm_banakar AT rediffmail.com

PERSONAL ATTRIBUTES :
-Good leader & Quick learner
-Positive Approach
-Good attitude
-Team player
-Dedicated & Devoted worker
-Flexible and adaptive Objective
A quick learner & a hard worker with excellent communication & debating skills and with ability to adopt new situations and stand up to challenges. Keen to go beyond the defined scope of curriculum. Aspire to take challenges and solve them, be a part of efficient, progressive & esteemed organization that proves my knowledge & skills.
Education
- Bachelor of Engineering
(Aeronautical Engineering) in
MVJ College of Engineering, Bengaluru
- pre-university Course from
Jawahar Navodaya Vidyalaya haveri
- Secondary School from
Jawahar Navodaya Vidyalaya haveri
Industrial Visits
- ‘HAL‘,Bengaluru in 2009
- ‘AFTC‘,Bengaluru in 2010
Achievements and Training under-gone
- Represented college sports in Hockey and won 3rd Place in Inter College Level 2011, Bangalore.
- Trained for Catia V5
Interests
- Travelling to explore new places.
- Reading novels.
- Listening to Music.
Academic Profile
Academic Qualification :
Course University/Board Name of the Institution Batch Percentage
obtained
B.E.
V.T.U, Belgaum MVJ College of Engineering,Bengaluru 2012 67.02%
PUC Central Board Of Secondary Education Jawahar Navodaya Vidyalaya Haveri 2007 63%
SSLC Central Board Of Secondary Education Jawahar Navodaya Vidyalaya Haveri
2005
67%
TechnicalSkills
- Designing softwares : Ansys, Matlab, CAED-CAMD, Catia V5
- Platforms : windows 7,windows XP,windows vista
Academic Project Details
Project Title ”Comparative studies of stresses in beams of various materials”

Team size 3
Tools Catia & Ansys
Project work MVJCE Bangalore
Description :
The project focuses on generating six I-section beams of different materials like alluminium,carbon fibre T300,and sandwich(alluminium & E glass) having cut-outs and no cut-outs and analyzing and comparing the stresses acting on them under same loading condition.
Declaration
I here by declare that the above-furnished information is true to the best of my knowledge & belief.
DATE :
PLACE : [PARAMESHWAR BANAKAR]

[Guest]

NISHIKANTA SAHOO
MECHANICAL DESIGN ENGINEER
Pune, Maharastra
Email :nishikant267 AT gmail.com

Mechanical Engineer with solid expertise in the conceptualization, creation, development and demonstration of innovative mechanical design. Highly experienced in the areas of part design, catia modelling, tooling/fixture, special machinery, kinematics and FEA. Proven ability to apply general principles of physics and engineering to provide technically feasible solutions for complex engineering problems.
3D Solid Modelling, Adv 3D surface design, Various Rubber Machine Design with Detailing and BOM

TECHNICAL KNOWLEDGE :
- Design software
- MS Office - AutoCAD
- Pro-E
- MS words & Excel - Catia-V5

EDUCATION | TRAINING :
Catia-V5-R19
J.N Engineering (july.2012-Till dated)
Catia-V5-R17
Mangalmurti Engineering (Nov.2011-june.2012)
Master Diploma in Product Design
(Auto Cad, Pro-E, Catia)
Cad Centre (july.2011-Oct.2011)
Bachelors in Mechanical Engineering
B.P.U.T, Orissa (2007 – 2011)
Obtained 70% Aggregate

PROFESSINAL SUMMARY :
- 6 months experience on Catia V5-R19 currently working in J.N Engineering Bhosari, Pune.
- 8 months experience as a Mechanical Design Engineer working on Catia V5-R17 in Mangalmurti Engineering Mahalunge, chakan, Pune.
- Total Years of Experience in design is 1.2 years.
- Highly experienced in the areas of part design, catia modelling, surfacing tooling/fixture, and special machinery.
- Excellent interpersonal skills coupled with the ability to adapt quickly and understand new technologies.

CATIA SKILLS :
- Sketcher
- Part Modelling
- Assembly
- Surfacing
- Detailing
- Drafting
- Sheet metal
- Stress Analysis
- Animation

PRO-E SKILLS :
- Part Modelling
- Assembly
- Surfacing
- Detailing
- Sketcher

AUTO CAD SKILLS :
- Erage,move,copy,rotate,array,mirror, align
- Text,Table
- Layer control & management
- Hatching utilities
- Dimensions
- Filter,group,block,Insert,Xplode,multiline
- Defining & editing Attributes
- Divide,Measure,Mslide
- External Reference

PROFESSIONAL ENGAGEMENTS :
Company : J.N Engineering July 2012-Till dated
Company Profile :
J N Engineering is young, vibrant organization consistently marching ahead on the path of progress since last few years. In a short span of time, it has earned the recognition of a leading ‘Rubber Machinery Supplier’ company. At J N Engineering we supply Rubber Processing Machines. Right from compounding to finishing of all parts, every single process is being executed by us.
Simultaneously handle 4 different projects & successfully implemented model changes for machine
Project no-1 : Warmer Press
Project no-2 : Vacuum Compression Moulding Machine (200 ton)
Project no-3 : Vacuum Compression Moulding Machine (100 ton)
Project no-4 : Automatic Feeding And cutting Machine
Project no-5 : Hydraulic Cylinders.

Team Size : 03
Roll : Catia V5-R19
ROLES & RESPONSIBILITIES (Catia)
- Part Designed & created assembly drawings including Bill of Materials & detail drawing, for work holding equipment & tool holders.
- Redesigned existing product using geometric toleracing standards.
- Modelling of Various Rubber Machine
- Drafting, Detailing & Assembly in 3D software
- Vendors Coordination & development
- Design with using Stress Analysis.

Company Name : Mangalmurti Engineering Nov 2011-June 2012
Company Profile :
M/s. Mangalmurti Engineering, established in 1991 has now grown up and became a full-fledged plant which can handle large fabrication jobs and turn-key projects. Handling jobs at site as well as on site is our specialty. With Experience of more than 17 years in the field of engineering and fabrication, the unit has a yearly turnover of around hundred lakhs. We are providing our services to all industrial units, government organizations, construction units, individuals, depending on their requirement.
Project no-1 : Hood Trolley for SK-250
Project no-2 : Tail Gate Assembly Trolley
Project no-3 : Star Base Storage Rack
Project no-4 : Fender Trolley for SK-250
Team Size : 02
Role : Catia V5-R17
ROLES & RESPONSIBILITIES (Catia)
- Fabrication works.
- Part modelling.
- Drafting, Detailing & Assembly in 3D software
- Vendors Coordination & development
- Various trolley design using Catia V5
- Design with using GD & T.
- Sketcher

EDUCATIONAL PROFILE :
Examination Passed University / Board Year of Passing % Marks
BE(Mech) B.I.E.T,Bhadrak, B.P.U.T, Orissa 2011 70%
+ 2(12th) Kendrapara college kendrapara 2007 57%
Matriculation(10th ) S.K.C High school patrapur 2005 68%

PERSONAL STRENGTHS :
Communication skills :
Effective communication and presentation skills by developing strong peer and client relationships, interacting with people from different backgrounds and building up good interpersonal relations, strengthened during work experience.
Leadership :
Taking a leadership role in group works, with continuous development of organisational and decision making skills, strengthened during employment and tertiary education.
THANK YOU

[Unregistered]

CURRICULAM VITAE
SURENDRA SHANTARAM MANKAR
surendra_mankar AT rediffmail.com

Objective :
To excel in my area of activity by taking up challenging assignments, hone skills by maintaining a learning attitude and contribute to the organization development with personal growth.

Academic Profile :
Bachelor of Technology (B.Tech) in Mechanical Engineering [Continue] from Karnataka State University, Karnataka
Diploma in Mechanical Engineering from Govt. Polytechnic, Khamgaon, Maharashtra

Computer Skill :
CATIA V5
Autodesk Alias
Auto-CAD
MS-Office

Strengths :
Team player
Dynamic & Hard Working
Self confidence & human relationship

Professional Experience :
Mazel India Pvt. Ltd. Pune.
Company Profile : Mazel is a European engineering and consultancy company in transportation industry with headquarters in Barcelona Spain. Mazel offers constant development in leading technologies for Styling, Design and Prototyping and is a leading player in the said services in Europe, Asia and South America.
Designation : Design Engineer
Duration : March 2012 to till date
Project Details :
Seat (Door Panels)
Sonalika Tractor ( Exterior Face Lift )

Responsibilities :
Analyzing and creating the technical requirements.
Recommending design concepts and modifications based on customer requirements.
Coordinating with customer to resolve engineering problems.
Evaluating and developing applications of new processes and methods into products.
Suggesting proposal for the interfaces on the component.
Conducting various analyses like Draft, Clash for project work.
Designing master sections of the plastic parts.
B surface creation by using styling data provided by customer.
Attachment proposals for B-side. Worked on wall thickness.
Detailing using GD & T. Packaging study of plastics parts.
Creating Parametric Models using Data from (A-Surface)
Design the features like bosses, Ribs, Locaters, tongue and groove etc.
Huf India Pvt. Ltd. Pune.

Company Profile : Huf India Pvt. Ltd. situated at Chakan, Pune. India is a leading manufacturer of automobile security systems, switches. Huf Group is worldwide leader in supplying Auto Components like Locksets, Steering Column Locks, Remote Keyless Entry Systems, Outside Door Handles and Immobilizers
Designation : Engineer Design & Development
Duration : July 2010 to Jan 2012
Project Details : Nissan, Ashok Leyland, Renault, Ford, Toyota
Steering Column Lock
Ignition Switch (design of plastic, wiring harness, die cast & sheet metal components)
Door Lock
Glove box Locks Assembly
Remote key
Prepare BOM (Bill of Material)

Responsibilities :
Prepared feasibility study for new product
Generating 3D model, assembly, sub-assembly, part and detail drafting
Develop design concept and approval to be taken from customer
Ensuring development of design concept as per APQP time line
Design, validate the concept & prepare DFMEA
Detailed design study and customer requirement understanding
Knowledge on GD&T and Tolerance Stack up calculation
Document mention Design file and APQP file. Aware of ECN
Universal Solutions, Pune

Company Profile : Universal Solutions, Pune is in concern with engineering service provider CAD/CAE, CAD software training etc.
Designation : Design Engineer
Duration : May 2009 to Jun 2010 (1.2 years)
Minda Valeo Security Systems, Pune.
Company Profile : Minda Valeo Security Systems Pvt. Ltd. India is a leading manufacturer of automobile security systems, door handles, switches & electronic safety devises.
Project Details : Mahindra & Mahindra, Maruti Suzuki
Remote key
Ignition Lock
Responsibilities :
It involves modification in CAD data as per customer requirements & spcification.3D modeling, assembling & drafting of parts. Other than these regular activities involves standardization of drawings & 3D modeling of it. Aware of ECN.

Personal Profile :
Name Surendra Shantaram Mankar.
Gender Male.
Languages Known English, Hindi, Marathi
Hobbies Listen Song, Playing Carom.
Marital Status Married.

Declaration :
I hereby declare that the above written particulars are true to the best of my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.

Date : Yours Faithfully
Place : Pune (Surendra S. Mankar)