Company Name : Techport
Company Location : Mumbai (Thane)
Designation : Engineer/Asst/Deputy Manager -Power Projects (Turbine & Boilers)
Company E-mail ID : jagannath.mirajkar@ambujacement.com
Company Website : http://www.techport.in/careers/current-openings.aspx

Job Description, Candidate Profile, Company Profile, Company Address :
Job Title : Assistant/ Deputy Manager - Power Project (Captive)
This is the opportunity for energetic and technically oriented people to explore the positions present at the moment.
Department : CAPEX Project Management - Power Projects
Job Profile :
The incumbent will be responsible for :
** To assist in selection of optimal technical concepts (system engineering) for Captive Power Plants (CPP) Projects
** Concept Formulation-Mechanical Engineering
** To assist in senior managers in process engineering as and when required
Assist the team member for mechanical engineering activities of ACC & ACL Captive Powerprojects:
** Greenfield and Brownfield and up-gradation of existing plants
** To prepare Feasibility Study Report (FSR) and Technical Bid Documents
** To assist during tendering and technical selection of major packages
** To coordinate for smooth transfer of project activities from engineering phase to execution phase
** To provide engineering support to project site teams during Project execution of the CPP projects
** To assist the Engineering Manager monitor and control Power project progress
Qualification : B.E (Mechanical)
Experience :
** The incumbent must have 3 - 7 yrs of expertise and experience in Project Engineering/ Management for power plants.
** Should have good communication & documentation skills.
Job Location : Thane (Mumbai)

Job Title : CFD (Computationl Fluid Dynamics)
Department : Plants Performance Development
Job Profile :
The incumbent will be responsible for :
** To Generate & run Various CFD (Computational Fluid Dynamics) models of precess equipments to arrive at optimum solutions.
** To Support to develop various models, to improve production potential of all plants as well as to reduce specific energy consumptions.
** CFD Modeling of process equipment's like Cyclones, ESP, and Calciner etc.
** Collection of data & drawings from plant/ equipment's supplier / projects for CFD modeling.
** Prepare 3D geometry model using effective dimensions from drawings by using workbench software.
** Generate proper quality & size of grids or mesh using Ansys ICEM.
** Defining the physical boundary conditions, setting properties of fluid and selecting appropriate model in Physics setting of CFD software.
** Interpretation & validation of simulation results of existing equipment, comparing different design modification with existing equipment and so on.
Qualification : B.E/ M.Tech (Chemical).
Experience :
** Minimum 5 years of experience, with 2-3 years in the role of performing process engineering calculation for cement industry .
** 1 -2 years of Experience in CFD Software Exposure.
Job Location : Thane (Mumbai)

Job Title : Sr.Manager - Electrical
Department : Electrical & Process Control Technology - ECT
Job Profile :
The incumbent will be responsible for :
** To support plants in improving the manufacturing performance by review /up-gradation of the existing automation system.
** Assist plants in implementing and selection of efficient electrical equipment .
** Quality assurance of electrical Equipment.
** Ensure the smooth commissioning by implementing pre - commissioning tags/check lists as per guide lines
** Develop and implement contract services as per group companies
** Ensure implementation of design criteria in all Capex projects.
** Electrical equipment assessments by developing proper Data bank for major Electrical equipment
** Carryout MPR for the designated blocks & Implementing MPR recommendations/findings
** Carryout Technical Assessments
** Expert Support to PMP validation, Implementing standards/systems,Technology update, Supplier collaboration & Support for power distribution and large drives problems.
Qualification : BE .(Electrical) or Equivalent.
Experience :
** 15 + years experience in Electrical maintenance & management of system in large cement production units.
Job Location : Thane (Mumbai)

Job Title : Kiln Operation & Control Specialist
Department : Thermal Process Technology - TPT
Job Profile :
The incumbent will be responsible for :
** Responsible for Process measurement, data collection, assessment of equipment using PPE tools, working out solutions / proposals for improvements.
** To improve thermal efficiency of plant, resolve kiln operational problems through Heat and mass balance studies, diagnostic studies.
** Carry out the technical assessment of kiln system by using various PPE tools to identify problem areas and workout remedies.
** Revising of horse shoe geometry & fixing the dimensions Operating coolers to optimized air flow and loadings Cooler fans evaluations (design / operating).
** Update of Preheater, kiln, cooler and cooler fans technical details after modification, if any.
** Prepare comparative statement of techno-commercial aspects of key equipments & Identify main issues and discuss with suppliers.
Qualification : B.E (Chemical)
Experience :
** The incumbent must have 4 - 5 yrs of experience out of which 1 to 2 years of experience in Process Engineering at plant.
** Composite diagnostic study of plant / MPR Experience 2- 4 years.
Job Location : Thane (Mumbai)

Job Title : Refractory Specialist
Department : Thermal Process Technology - TPT
Job Profile :
The incumbent will be responsible for :
** Improve Kiln Production Rate Index (PRI) and reduce specific energy consumption in the pyro-section
** Carry out refractory performance audits in the thermal processes.
** Evaluate raw materials and fuel characteristics to select appropriate quality refractories &Implementing recommendations to improve the performance of the refractories
** Study the thermal system & grinding units where hot air furnace is installed - analysis of data, failure history & installation procedures
** To Identify and fix the problems & Propose the changes/modifications if any.
** Monitor, support and analyze the performance after recommendations are implemented.
** Evaluate the impact of AFR materials on Refractory performance
** Design, selection, refractory engineering and installation of refractory for existing and new projects
** Keeping abreast with the latest developments in Refractories by discussing with Manufacturers and users
** Selection of appropriate refractory materials and conducting trials with the same in a controlled manner.
Qualification : B.E (Chemical / Ceramic)
Experience :
** The incumbent must have 8 years of experience out of which 4 years in refractory selection, designing and installation in cement plants.
** 2 years in Cement process engineering to ascertain the impact of process conditions, raw mix design and fuel mix on Refractories.
** 2 years in Diagnostic studies, trouble shooting, technical assessments including AFR - specialist role
Job Location : Thane (Mumbai)

Job Title : Draftsman Specialist
Department : CAPEX Project Management - Control & Automation
Job Profile :
The incumbent will be responsible for :
** Prepare C&A (Control & Automation) and Electrical drawings.
** GA (General Arrangement) drawings of Control, Instrumentation rooms and load Centers.
** Prepare SLD (single line diagrams), P&I diagrams & Bill of quantity for cost estimation.
** Review and finalize suppliers equipment drawings, GA & layout during technical evaluation and do sign-off.
** To clarify doubts and assist project execution team for related C&A and electrical drawings.
Nature of Experience :
Qualification : Diploma in Instrumentation / Electrical
Experience :
** Minimum experience of 5 years with practical knowledge and exposure to AutoCad.
** Preliminary knowledge of Etap software & high level of computer literacy.
** To create data bank for drawings of executed projects and plants in central database server.
Technical / Functional Skills :
** Clear understanding of C&A and Electrical related jobs.
** Knowledge of codes and symbols of ANSI/ISA standards.
** Making P&I diagrams.
** To work out different design to optimize plant layout.
** Saving and retrival from central database server.
Job Location : Thane (Mumbai)

More Information about this submission and submitter :
Submission ID : 5530433
Date & Time : 14th Apr 2012 7:02 AM (UTC)
IP Address : 14.97.52.169
Browser info : Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
Predicted Country : India