OHPC Recruitment 2012 www.ohpcltd.com Odisha Hydro Power Corporation Limited : Graduate Engineer Trainee GET, DET, MT

[muthukalee]

Name of the organisation : OHPC Odisha Hydro Power Corporation Limited (ohpcltd.com)
Name of the post : Recruitment of Graduate Engineer Trainees GET, DET, MT in 2012
Reference Number : Advertisement No.OHPC: HQ: HRD: RECTT: 03/2012

Advertisement : http://www.ohpcltd.com/DetailedADVT_GET_MT_DET2012.pdf
OHPC Recruitment Page : http://www.ohpcltd.com/index.asp?type=recruitment

CAREER OPPORTUNITIES FOR PROFESSIONALS
The Corporation intends to recruit young, bright and energetic individuals as Graduate Engineer Trainees, Management Trainees and Diploma Engineer Trainees in Electrical, Mechanical, Civil, HRD & Finance disciplines.

Name of Post TOTAL
GET (Ele.) 22 (*PH-01)
GET (Mech.) 6
GET (Civil) 1
MT (HRD) 3
MT (Fin) 2
DET (Ele.) 9 (*PH-01)
DET (Civil) 8

AGE : A candidate must be above 21 (twenty one) years and below 32 (thirty two) years as on 01.05.2012.

ESSENTIAL QUALIFICATION :
GET (Ele.) / GET (Mech) / GET (Civil)
Full time Degree in Electrical Engineering/ Electrical & Electronics, Mechanical, Civil Engineering from recognized University/Institution, approved by AICTE with a minimum of 60 % marks in aggregate or AMIE in Electrical Engineering with a minimum of 50 % marks in aggregate.

MT (HRD)
Post-Graduate Degree/ Diploma of Two years(Full time) duration in personnel Management/ Industrial Relations & welfare/ HRD/ HRM/ PM & IR/ MBA with specialisation in HRD or Personnel Management from recognised institute of repute with a minimum of 60% marks in aggregate.

MT (Fin)
Degree in any discipline with ACA/AICWA/MBA(Finance) from XLRI, IIMS or XIMB for candidates belonging to General and SEBC category. For candidates belonging to SC & ST category, the minimum qualification is Degree in any discipline with MBA(Finance) from a University or Institution of repute.

DET (Ele.), DET (Civil)
Full time Diploma in Electrical Engineering / Electrical & Electronics, Civil Engineering from recognized University/ Institution/ State Council of Technical Education with a minimum of 60% marks in aggregate.

FEE :
Before applying on line, candidate has to make a non-refundable A/C payee Demand Draft (DD) for Rs.350/- (not applicable for SC, ST and PH) drawn in favour of Odisha Hydro Power Corporation Limited, payable at Bhubaneswar. The candidate has to fill in the details of Demand Draft while applying on line.

HOW TO APPLY :
The applicants are to apply through "ON LINE APPLICATION REGISTRATION SYSTEM" through the Website www.ohpcltd.com of OHPC. The Website will be open from 28.05.2012 to 16.06.2012.

After filling up the ON-LINE application; Candidate is required to download the application form with unique registration number & take a print out of the same in A4 size paper and has to duly sign in the print copy of the on line application form in the space provided.

Print out of the application along with Two recent passport size colour photographs (one to be signed on the front & pasted in the form and the other to be enclosed) & necessary documents shall have to be sent through by ordinary post in an envelope superscribing ‘APPLICATION FOR THE POST OF GET / MT / DET’ (as applicable) to
Post Box No.2752,
GPO,
Kolkata-1
so as to reach on or before the last date i.e 23.06.2012.

[Guest]

Hi,
i am a fresher engineer in mechanical branch in this year.

[Guest]

RICHA SONI
E-Mail : richasoni1807 AT gmail.com

To work for an organization which can provide me more opportunity to serve my qualification, skills and experience in the optimum way to grow with the organization

PROFESSIONAL SYNOPSIS
- A result oriented professional in the areas of electrical equipments and power transmission.
- Knowledge of exploring & developing new markets.
- Exposure of spearheading development policies for achieving business from the clients.
- An effective communicator with good presentation and organisational skills.
ACADEMIC
- B.Tech. (Electrical) from LINGAYA’S INSTITUTE OF MANAGEMENT AND TECHNOLOGY Faridabad with 63% in 2011
- Intermediate from Aggarwal Public School Faridabad affiliated from C.B.S.E in 2007. Secured 70.00%.
- SSC from Aggarwal Public School affiliated from CBSE Board in 2005. Secured 61.00%.
IT Skills : Well versed with MS – Office, Auto-Cad, Linux,Windows 2000 & XP and Internet Applications.

ACADEMIC TRAINING
- Completed two months industrial training (From July’10 to August’10) in TECHNOFAB ENGINEERING LIMITED, Faridabad in Design Dept. and worked as “Trainee Engineer” on several ongoing projects on the shop floor.
- Completed two months industrial training (From June’09 to July’09) in ESCORTS LIMITED, Faridabad in Electrical Dept. and worked as “Trainee Engineer” on several ongoing projects on the shop floor

PRESENTATIONS AND PROJECT UNDERTAKEN
- Project on POWER LINE CARRIER COMMUNICATION (Working Model)
- Presentation on DESIGN OF SUBSTATION based on the training done in Technofab Engineering Limited.
- Presentation on Electric Distribution based on the training done in Escorts Limited.

MEMBERSHIP & CERTIFICATION
- 3rd rank in General Quiz Competition held during educational fest.
- Member of Organizing Committee of the inter college technical fest.
- Member of Organizing Committee of the inter college educational fest.
- Member of Discipline Committee in college zest.

HOBBIES
- Art
- Badminton
- Net Surfing
I hereby Certify that the above given information are correct to the best of my knowledge.
RICHA SONI
Date :
Place :

[Guest]

CURRICULUM VITAE

Richa Gupta
E-mail : gupta.richa116 AT gmail.com

CAREER OBJECTIVE :
To be able to excel at my work with best of my efforts in achieving organizational goals through my abilities based on continuous learning and be able to grow with a progressive organizations.
WORKING EXPERIENCE :
March 2010 – Present
Senior Recruitment Consultant
Net Consulting International
Dehradun, Uttarakhand
Net Consulting International is a telecommunication recruitment consultancy with the head office in London and offices in Asia. Net-Consulting International is an award winning ISO 9001 company. Net-Consulting is fast becoming one of Europe's most successful privately owned specialists Information and Communication Technology (ICT) Company’s.
JOB PROFILE :
- A talent for analyzing problems, developing procedures and finding innovative solutions.
- Strong client liaison, business development and relationship building skills.
- Maintaining database of clients / candidates profiles.
- Pre-screening of candidate resumes, telephonic screening for meeting requirement specifications and bundling and sending resumes to Vendors/Direct clients.
- Pre-selection Counseling of candidates and follow-ups with the clients.
- Keeping the records of all day-to-day correspondence.

ACADEMIA :
- Masters of Business Administration from Graphic Era University (2008- 2010), 1st Division
- Bachelor’s in Business Administration (HNB, Garhwal University) 2005-2008, 1st Division.
- Intermediate (ISC Board) 2004-2005, 1st Division.
- High school (ICSE Board) 2002-2003, 2nd Division.


SUMMER INTERNSHIP :
1) ORGANISATION - ONGC, Telbhawan, Dehradun
DESIGNATION - Management Trainee
PROJECT TITILE - Performance Appraisal
DURATION - Two month (15.05.2005-14.07.2005)
KEY REPONSIBILITIES
- Identify employee training needs
- Document criteria used to allocate organizational rewards
- Form a basis for personnel decisions : salary increases, promotions, disciplinary actions, bonuses, etc.
- Validate selection techniques and human resource policies to meet federal Equal Employment Opportunity requirements.
2) ORGANISATION - ONGC, Delhi
DESIGNATION - Management Trainee
PROJECT TITILE - Recruitment
DURATION - One month (15.07.2009-14.08.2009)
Recruitment refers to the process of attracting, screening, and selecting qualified people for a job at an organization or firm
KEY STUDY AREAS :
- The practicality, reliability, validity, and utility of various forms of selection measures
- Assessing fairness and making selection systems as fair as possible.
- The generalizability of validity across different work contexts.
- Recruitment refers to the process of attracting, screening, and selecting qualified people for a job at an organization or firm.
COMPUTER PROFICIENCY :
- Packages : MS-Office (Word, Power Point, Excel).
- Internet Operations.
PERSONAL PROFILE :
Strengths : Capable of achieving personal and team objectives through learning attitude, patience, listening, and persuasiveness. Ambitious and goal oriented with clear vision of future objectives. I am keen to find a challenging position within a progressive organization.
(RICHA GUPTA) DATED :

[amitpradhan]

RESUME
AMIT KUMAR PRADHAN
Email : amitpradhan666 AT gmail.com

OBJECTIVES
To work in a dynamic environment where I can utilize my skill at the edge of technology and creativity, to learn and innovate and that promotes my professional growth with challenging tasks and help me for enhancing my skills and potential to my best to create new avenues.
EDUCATIONAL PROFILE
- 10th from N.B.BIDHYAPITHA KONKORADA HIGH SCHOOL with 47.07% in the academic year 2003
- DIPLOMA CIVIL ENGG from B.S.E.T,BERHAMPUR with 63.07% in the academic year of pass out in 2010
WORK EXPERIENCE
- Now I am doing a job in Pune construction one north April 2010
COMPUTER SKILLS
- AutoCAD, internet browsing
PERSONAL SKILLS
- Good Learner
- Leadership
- Can work independently as well as with team in efficient way.
DECLARATION
I declare that the above information furnished by me is true to the best of my knowledge.
Date- ___/____/_____
Place- Bhubaneswar
AMIT KUMAR PRADHAN

[Guest]

This letter is in response to the mail for the post of Mechanical Engineering in you organization. I hereby express my interest in building career in your organization . I believe that my knowledge and skills will make me a competitive candidate for the specified position.

The key strengths that I possess for building a successful career include
:
1.Completed Diploma Mechanical Engg. With 71.82% in the year Dec. 2006

1. Completed Mechanical Engineering with 70.53%(66.66agr.) in the year Augt. 2010
2. Good knowledge of drawing and fabrication
3. Eager to learn new things.
I would like to thank you for sparing your precious time for considering
my resume. My detailed resume can be found as attachment in the mail. I can be reached anytime on my number (+91) 9574513703. I am looking forward to talk with you regarding any employment opportunity.
Thanks and Regards,
vipul kabariya.
KABARIYA VIPUL K.
Email : vipul_kabariya AT rediffmail.com
Career Objective
- Aiming to establish myself as a high performing asset of the organization where I can apply my strength and potentials as an engineer and hence can develop myself in addition to aiding the overall growth of the organization
- To advance in an environment offering new challenges and seeking a responsible career in the field of technical side.
Academic Profile
I have completed Degree Course in Mechanical Engineering (B.E Mechanical) from Shri. Gulabrao Deokar college of Engineering, (M.S.) Jalgaon, Approved by AICTE Recognized by Govt. of Maharashtra affiliated to North Maharashtra University, Jalgaon.
.
Examination University/Board Year of Passing Percentage of Marks Class/Division
B.E
MECHANICAL.
North Maharashtra University, Jalgaon.
2010

70.53%
(66.66 %aggr.)

Distinction
DIPLOMA IN
MECHANICAL
ENGG.
T.E.B
Gujarat
2006
71.82% (aggr.)
Distinction
S.S.C.
GSEB, Gujarat
2001
72.43 %
Distinction
Honesty.
Academic Projects
- Successfully completed project on “ROTATIONAL MOLDING MACHINE.” As a part of academic curriculum 2010.
Seminars
- Presented a seminar on “sugarcane harvester” as a part of academic curriculum.2010.
Work experience
Presently I work G.M.EXPORT PVT.LTD. Rajkot from 1/04/2011 to till date in Quality Department.
I hereby declare that above mentioned details are correct and complete to the best of my
Knowledge.

[Sudharsan V]

SUDHARSAN V
E Mail : sudharsan117 AT gmail.com
Career Objective :

To be a part of a progressive and an eminent company, impart the technical and leadership
skills acquired during the years of my education and taking the organization to great heights.
Academic Qualification :
Course Institution Year of Passing Aggregate
B.E - Mechanical SCSVMV University, Enathur, Kanchipuram. May - 2012
7.63 (CGPA)
XII Bharathidhasan Matriculation Hr. Sec. School, Kanchipuram. March - 2008
76.50%

X SSKV Matriculation Hr. Sec. School, Kanchipuram. March - 2006
72.63%
Project Works Undertaken :
Mini Project :
- Title : Experimental Analysis Of Pressure Distribution In Journal Bearing Using Various
Lubricants
This study focuses on replacement of petroleum-based engine oils with bio-lubricants, since the former are non-degradable and hazardous the environment.
Main Project :
- Title : Driver Alert System
This project is currently underway for the academic project work for the bachelor’s degree. The alertness of the driver when he drives the vehicle is monitored and if abnormality is found the system alerts the driver by an alarm and a vibrating unit placed below the driver’s seat. If he doesn’t respond for the first alert then the brake and clutch engages and slows down the vehicle and gradually halts the vehicle.
Areas of Interest :
- Manufacturing Technology
- Power Plant Engineering
Skill Set :
- Programming Languages : Basics of C & C++
- Software Packages : Autocad, Pro/E, Ansys, Codesys
- Others : MS-Word, Excel, PowerPoint

In-Plant Trainings Undertaken :
- Engineering Workshop, Arakkonam
- Integral Coach Factory, Chennai
Strength :
- Quick learner
- Dynamic and energetic
- Leadership qualities
- Adaptable and hard worker
- Desire for learning new things
- Good in time management

Extra Curricular Activities :
- Actively participated in athletics and won many prizes
- Actively participated in NSS events organized by SCSVMV University
- Completed two years NSS course and have been awarded for the same
- Active volunteer in the organizing committee for NSS events conducted by
SCSVMV University
- Active volunteer in the organizing committee for inter college annual sports meet conducted by SCSVMV University
- Have been an representative for my class
Achievements :
- Won silver medal in 400m State level inter college athletics meet - 2011
- Won bronze medal in 200m State level inter college athletics meet - 2010
- Won gold medal in 800m District level inter college athletics meet - 2009
- Stood 8th place in District level marathon organized by SDAT, Kanchipuram
- Have won many medals and prizes in marathon races
- Represented my school in the National level tennis ball cricket match at Shimla
- Runners up in shuttle doubles in Zonal level games
Hobbies :
- Listening music
- Photography
- Practising for athletics
- Hanging out with friends

Declaration :

I hereby declare that all the details mentioned above are true to the best of my
Knowledge and belief.
Place : Kanchipuram
Date : 11.06.2012 V.SUDHARSAN

[Guest]

RESUME
M. SANDEEP
Email :marikundam.sandeep AT gmail.com

OBJECTIVE :
To be Associated with Progressive Organization that gives me scope to update my knowledge and Skills with latest trends and be a part of team and Dynamically works Towards Growth of Organization with Sincerity and Determination and Gain Satisfaction.
ACADEMIC QUALIFICATIONS :
B.Tech with discipline Electrical & Electronics Engineering with an aggregate
of 57.68% in 2010 from Sree Dattha Institute of Engineering and Science.
INTERMEDIATE with an aggregate of 67.61% in 2006 from Aurobindo Junior College.
SSC with an aggregate of 66% in 2004 from Vidya Public School.
TECHNICAL EXPERTISE :

- Software Languages : - C Language
- Operating Systems : - Windows
PROJECT PROFILE :
MITIGATION OF VOLTAGE SAGS AND SWELLS TO IMPROVE POWER QUALITY
Technology : By using Matlab/Simulink
Objective : The objective of this work is to model and analyze custom power devices for compensating voltage sag and swell conditions in three phase systems. Faults occurring in power distribution systems or facilities in plants cause the voltage sag or swell.
In order to mitigate voltage sags, various custom power devices are used i.e. DVR (Dynamic voltage restorer), DSTATCOM (Distributed static Compensator), These schemes are able to quickly recognize the voltage sag or swell condition
TECHNICAL SEMINAR :
- Modelling and Simulation of The Three Phase Induction Motor.

MINI PROJECT :
- Intelligent Train Engine.
STRENGTHS :
- Hard Working, Quick Learner, Motivator, Good at Aptitude.
- Positive Thinking, Friendly and Extrovert.
- Ability to deal with people diplomatically.
- Flexible and willingness to accept new challenges.
DECLARATION :
I here by declare that all the information given above is true and complete to the best of my knowledge.
Date :
Place : (M.SANDEEP)