GAIL Recruitment 2012 GAIL India Ltd www.gail.nic.in : Junior Engineer, Officer

[hemalathaijt]

Name of the organisation : GAIL India Ltd (gail.nic.in)
Name of the post : Recruitment for Junior Engineer, Officer in 2012

GAIL Opening Page : http://www.gail.nic.in/final_site/current_opening.html
Advertisement : https://gailebank.gail.co.in/extapps/Online_recruitment/GAIL-OPEN-SRD-1-2011/Advertisement_for_SRD_2012-Revised%20(02.05.2012).pdf
Apply Online : https://gailebank.gail.co.in/extapps...ent/career.asp

SPECIAL RECRUITMENT DRIVE FOR SC / ST / OBC (Non Creamy Layer)/PWD(HH) CANDIDATES

GAIL (India) Limited, a Navratna PSU, invites applications from Scheduled Castes, Scheduled Tribes, OBC (Non-Creamy Layer) and PWD (HH) candidates only, to fill up category wise vacancies indicated below;

Total Post : 18

Name of the Post : Officer (Library) Grade: E-1
Pay scale : Rs. 20600 – 46500/-
Number of Post : 1
Upper Age Limit :
PWD(HH)-GEN :- 37 Years
PWD(HH)- SC/ST :- 42 Years
PWD(HH)-OBC(NCL) :- 40 Years
Minimum Essential Qualifications : Graduate with Master Degree in Library Science with minimum 55% marks for PWD (HH) candidates.

Name of the Post : Officer (Official Language) Grade: E-1
Pay scale : Rs. 20600 – 46500/-
Number of Post : 2
Upper Age Limit :
i)35 Years for OBC (NCL) Candiates
ii)40 Years for OBC (NCL)-PWD candidates
Minimum Essential Qualifications : Master Degree in Hindi Literature with minimum 60% marks for OBC (NCL) candidates and 55 % marks for OBC (NCL) – PWD candidates. Should have English as one of the subjects in graduation. Desirable: Degree or Diploma in translation in Hindi to English and vice-versa from any recognized University or equivalent.

Name of the Post : Officer (Laboratory) Grade: E-1
Pay scale : Rs. 20600 – 46500/-
Number of Post : 2
Upper Age Limit :
For OBC (NCL) Candiates – 35 Years.
For OBC (NCL)-PWD Candidates – 40 Years
Minimum Essential Qualifications : Master Degree (M.Sc.) in Chemistry with minimum 60 % marks for OBC (NCL) candidates and 55% marks for OBC (NCL)-PWD candidates.

Name of the Post : Officer (Security) Grade: E-1
Pay scale : Rs. 20600 – 46500/-
Number of Post : 3
Upper Age Limit :
For OBC (NCL) Candiates – 48 Years.
For OBC (NCL)-PWD Candidates – 53 Years
Minimum Essential Qualifications : Bachelor Degree with minimum 60% marks for OBC (NCL) candidates and 55% marks for OBC (NCL)-PWD candidates. Preference will be given to candidates with Diploma in Industrial Security.

Name of the Post : Junior Engineer (Mechanical) Grade: S-7
Pay scale : Rs. 16300 – 38500/-
Number of Post : 4
Upper Age Limit :
For SC/ST Candiates – 45 Years.
For SC/ST-PWD Candidates – 50 Years
Minimum Essential Qualifications : Diploma in Engineering in Mechanical / Production / Production & Industrial / Manufacturing / Mechanical & Automobile with minimum 55% marks for SC/ST and SC/ST-PWD candidates.

Name of the Post : Junior Engineer (Electrical) Grade: S-7
Pay scale : Rs. 16300 – 38500/-
Number of Post : 2
Upper Age Limit :
For SC/ST Candiates – 45 Years.
For SC/ST-PWD Candidates – 50 Years
Minimum Essential Qualifications : Diploma in Engineering in Electrical / Electrical & Electronics with minimum 55% marks for SC/ST candidates and SC/ST-PWD candidates.

Name of the Post : Junior Engineer (Chemical) Grade: S-7
Pay scale : Rs. 16300 – 38500/-
Number of Post : 4
Upper Age Limit :
For SC/ST Candiates – 45 Years.
For SC/ST-PWD Candidates – 50 Years
Minimum Essential Qualifications : Diploma in Engineering in Chemical / Petrochemical / Chemical Technology / Petrochemical Technology with minimum 55% marks for SC/ST candidates and SC/ST-PWD candidates.

Fee :
Candidates belonging to OBC (Non Creamy Layer) category and applying for post in E-1 grade are required to pay a non- refundable application fees of Rs. 200/- (Rupees two hundred only) by Demand Draft / Pay Order drawn in favour of GAIL (India) Limited payable at New Delhi.

HOW TO APPLY:
i)CANDIDATES WILL BE REQUIRED TO APPLY ONLINE THROUGH GAIL WEBSITE.
ii)Website will be open from 1000 hrs on 07.05.2012 to 2400 hrs on 06.06.2012
iii)Print out of the Online Application Form duly signed and affixing latest passport size colour photograph along with required demand draft (if applicable) and attested true copies of the testimonials / documents mentioned above (Clause No. 7.2) should be sent by Ordinary Post in a cover super scribed “APPLICATION FOR THE POST OF _______________ ” [POST, REGN. NO. and CATEGORY: SC/ST/OBC(NCL)/PWD as the case may be] to the following address :
Senior Manager (HRD),
GAIL (India) Limited,
GAIL Bhawan, 16,
Bhikaiji Cama Place,
R K Puram, New Delhi-110066

Last Date : 20.06.2012.

[Guest]

T.NAVANEETHA
E-Mail :
Navaneetha.tunkimetla AT gmail.com

Permanent Address :

Andhra Pradesh
India.
Personal Details
Father’s Name : T Ramulu Goud
Date of Birth : 07-05-1990
Nationality : Indian
Sex :
Marital Status : Married
Languages known :
- English
- Hindi
- Telugu
Objective

Seeking a challenging position to utilize my skills, aim to be with a progressive organization that gives me scope to update my knowledge and skills in accordance with latest trends and to be part of a team that dynamically works towards the organization and gain satisfaction thereof.
Education

Completed Bachelor in Electronics and Communication Engineering, Jawaharlal Nehru Technological University, Hyderabad.
Personal Traits
o Fast learning capability of any new cutting edge technology.
o Good Presentation and Leadership skills.
o Responsible and Sincere in attitude.
o Excellent Problem Solving Skills.
o Self Motivated-Workaholic.
o Positive thinking and enthusiasm.
Technical Skills :

- Languages : C, CORE JAVA

- Packages : Ms-Office
- Operating Systems : Windows ‘98/2000, XP, MS-DOS.

Other Activities
o Taken active part in co-curricular activities.
o Participated and organized cultural festivals in school and college.
o Currently doing apprenticeship training in cement corporation of india
ACADEMIC QUALIFICATION
DEGREE SCHOOL/COLLEGE YEAR OF PASSING UNIVERSITY PERCENTAGE
B.Tech.
(ECE).
S.S. Institute of Technology, Dundigal.
June 2011
Jawaharlal Nehru Technological University, Hyderabad.
68.9%
Intermediate

Guntur Vikas Junior College, Hyderabad
APRIL 2007 Board of Intermediate Education
Hyderabad.

88.2%
SSC DAV High School
May 2005 Board of Secondary Education

81%
Main Project :
Project Title : FPGA Implementation of Telemetry Link Transmitter and Receiver
- Team size : 4
- Platform : VLSI
- Technologies : ModelSim and Xilinx
Project Details :
Telemetry is the process by which an objects characteristic’s or parameters are measured and the results transmitted to a distant station where they are displayed, recorded and analyzed.
In this both the transmitter and receiver sections of telemetry link will be implemented on FPGA using Very High Speed Integrated Circuit Hardware Description Language(VHDL).
The Manchester encoder and decoder and FSK modulator and demodulator along with other timing and control circuitry will be implemented in VHDL and will be synthesized for FPGA’s.
- Technologies : Modelsim and Xilinx
Declaration :
I consider myself familiar with Electronics and Communication Engineering Aspects. I am also confident of my ability to work in a team. I hereby declare that the information furnished above is true to the best of my knowledge.
Place :
Date : (NAVANEETHA T)

[Guest]

CURRICULUM VITAE
SHARJEEL AHMED T.S
E-Mail : sharjeelin2020 AT yahoo.com ,

AIMS/OBJECTIVES :
- To work for professionally managed organization and to add value to the concern.
- To develop my skills and abilities through hands on experience and to learn from the best.
- To be fast, focused and flexible towards achieving goals.
- To cascade my knowledge & motivate sub-ordinates down the level for common goal & extracting their best for the organization.

EMPLOYMENT SUMMARY :
Eight+ years of versatile experience in the field of Programming & operating CNC Machine and various roles-and Commissioning, Maintenance, Project Management in the New OTR tyre plant.

EXPERIENCE DETAILS :
1. Presently Employed in J K Tyre & Industries Ltd,
Off The Road Tyre (OTR) Plant, Mysore,
As Mechanical Engineer
Since from May 2008 to till Date.
J K Tyre, OTR Project is one of the Largest OTR Tyre Manufacturing Unit in India, producing Large and Ultra large tyres for mining industries.

2. PREVIOUS WORK PROFICIENCY :
a. Worked as a Mechanical & Production Engineer in QADCO (Qasar Al-Andalus) Company LLC, Qatar.
Work period : November 2006 to February 2008.
b. Worked as a CNC Programmer Cum Operator in REFCON (Refrigerated Containers Industrial Company LCC) in Saudi Arabia.
Work period : June 2004 to August 2006.
c. Worked as a CNC Programmer Cum Operator in Automotive Axles Ltd, American Based Company (1SO-9001 & Q.S. 9000).
Work period : June 1999 to August 2003.

PROFICIENCY MATRIX
- Managing installation and commissioning of the heavy equipments which includes Tyre Curing presses, Tyre Building M/C’s etc.
- Preparing engineering drawings, layouts, diagrams.
- Preparing engineering critical spares drawings.
- Estimating the cost for erection & commission of the plant; reviewing & analyzing contractor's change order proposals & submittals.
- Planning and effecting predictive & preventive maintenance schedules of various equipments to enhance the equipment reliability and increasing machine up time.
- Identifying the areas of obstruction / breakdowns and taking steps to rectify the equipments through application of trouble shooting tools.
- Developing standard maintenance and operation procedures.
- Implementing various techniques to reduce down time and the effective utilization of man power.
Consolidated Responsibilities in J K Tyre & Industries Ltd, OTR Project

Worked extensively in installation & commissioning of OFF THE ROAD TYRE Plant.
- Prepared the plant & machinery layout for 30TPD Green field project
- Prepared the layout for the following Govt approvals
- Factory inspectorate,
- Udyog Mitra,
- Pollution & environmental board
- fire Hydrant & escape route
- Electrical Circuit Diagram
- Prepared Material Handling Equipment drawings and Critical Spares drawing
- Budgeting and Procuring materials as per plan/requirement.
- Prepared entire layout and Circuit Drawing of utility.
- Ensure adoption of proper work procedures by the concerned contractors; ensure safety of the work force by training and implementation of the standards.
- Ordering of critical spares for the equipments.
- Procurement of material by proper channel in working platform of SAP.

Achievements :
- Erection and commissioning of one of the Largest Curing Press in India
Of size 170” and produced LARGEST TYRE IN INDIA of size 40-00-57.
- Played a major role in the Relocation project , which included dismantling , transferring ,re-erection and commissioning of heavy machineries with all the TPM standards in record time of 72 days (8 Curing presses, 4 Bldg M/C’S, 4 Band Bldg M/C’s, extruder etc)
- Played a major role in the LCV project , which included dismantling , transferring ,re-erection and commissioning of heavy machineries with all the TPM standards .

PERSONAL COMPETENCIES
- Good team player.
- Problem solving and decision making skills.
- Willingness to Learn.
- Proven leadership skills as leader for project teams of up to 4 members.
- Perseverance and patience to attend problems.

ACADEMICS
Diploma in Mechanical Engineering.
From C.P.C Govt, polytechnic college, Mysore
Karnataka under Board of Technical Education, Bangalore

TECHNICAL SKILLS :
Programming Language Auto Cad 14, 2000, 2004, 2007, 2009 & 2010, 2012
Operating System Dos, Windows 95, 98, NT, 2000.
Windows XP & Windows vista
Application Software SAP, MS Word, Excel, Power Point Windows 98, XP
Programming and Operating. Computer Numerical Control (CNC)

WORK EXPOSURE
Consolidated Responsibilities in QADCO (Qasar Al-Andalus) Company LLC, QATAR
- Producing Interior Standard decorative sizes of profiles such as Studs, Furring Channels, Wall Angles, Racks, etc.
- To look after the quality of produced materials.
- To look after the machineries such as Roll Forming Machines, Compressors, etc.
- To look after & develop work design as per standard sizes.
- Handling & guiding the Technicians & casual labour to perform the job with all the safety precautions.
- Handling the shop floor & shift activities
- To look after preventive maintenance of all the equipments.
Consolidated Responsibilities in REFCON (Refrigerated Containers Industrial Company LCC) in Saudi Arabia.
- Programming & operating CNC Machine (CO2 Slab Laser).
- Giving output/produce the job such as cutting the sheets like : Mild steel up to 16 mm thickness, stainless steel up to 10 mm thickness, aluminum up to 10 mm thickness, acrylic sheet up to 16 mm thickness, rubber up to 30 mm thickness, coating sheet up to 10 mm thickness into any kind of desired shapes.
- Preparing drawings of any desired shapes by using AUTO CAD.
Using Fast Cam (software) to produce the cutting path to a particular shape as per the drawing.
- Programming & operating CNC Machine Hydraulic Press Pan Break machine.
- Programming Operating CNC DHGM Shearing Machine.
- Involved in planning of new projects with aid of Managers.
Consolidated Responsibilities in Automotive Axles Ltd, American Based Company (1SO-9001 & Q.S. 9000).
- Operating CNC machines (turning operation) PUMA 121 (Fanuc series, Horizontal axis).
- Producing of Axle shafts (RS 120, Q 109 (I) Q 109 (S), (Operation, setting & maintenance).
- Well versed in jobs like drilling, threading, boring, grooving, milling, turning operations etc.
- Writing the programs for drilling, threading boring, grooving, milling, turning.
- Operation of C.N.C machines (Heidene control, Fanuc control Standard cycles etc).
-
Apart from the above said M/C’s have a sound working experience on Hydraulic Machines, Punching Machines etc.

TRAININGS ATTENDED
- Undergone in plant training on Quality circle
- Undergone in plant training on TPM implementation skills
- Undergone in plant training on 5 S & its Implementation.
- Undergone in plant training on Safety Programme
- Undergone in plant training on ISO-9001-2000 Documentation

DECLARATION :
I am confident of my ability to work in a team. I hereby declare that the information furnished above is true to the best of my knowledge.

DATE :
PLACE : Mysore
Signature
(Sharjeel Ahmed T.S.)

[Guest]

Curriculum- Vitae

SANJEEV VERMA
Sanjeevverma10 AT rediffmail.com,sanjeevsoni25 AT indiatimes.com
Career Objective :
Intend to have a Professional career, which would exploit my potential and skill to its Maximum keeping me update of all the professional issues and evolve me as a better Professional through my career A challenging and rewarding career where I can impart my skills for the best use of the organization.
Professional Qualification :
B.E.-Chemical Engineering with 65.00% marks (1999 –2003) from S.D.C.E.T. Muzaffarnagar, affiliated to C.C.S. University Meerut (U.P.)
Academic :
B.Sc. : I have completed B.Sc. from Agra College Agra affiliated to Dr. B. R. A. University Agra.
Working experience : Presently working a renowned company Sep. 2008
Company Profile : Parkaire Engg. Co. Pvt. Limited. Company is an ISO 9001 system based company involved in Design &Manufacturers of all type of Heat Exchangers, air water cooled chilling units.
Process condensers, air gas receivers and high Pressure Vessels, LPG Bullets/ Vaporizers. Inter coolers After coolers, oil coolers, columns, Reaction Vessels, Suction heaters, Air heaters, Waste Heat Recovery units, Air & Water cooling systems, Under third party inspection LRIS, EIL, CEIL, BVIS, PDIL, NTPC, IRS, DNV, UDHE,IBR,TUV, Dalal Consultants & others. Designing & Fabrications in accordance with various National/International Standards IS 2825, IS 4503,TEMA, ASME, API, etc.
Position Title : Sr. Engineer (Design & Marketing)
Specialization : Detailed process, Thermal & Mechanical Design, Marketing of Heat Exchanger & Pressure Vessels in relevance to ASME &TEMA Submission & Approval of document from client, like NTPC, IOCL, ONGC, HPCL, PDIL, EIL etc. Detailed technical discussion with clients for approval of documents.Co-ordination with other departments for manufacturing of equipments.
July2007 to Aug. 2008
Company Profile : MVS Engineering Limited - New Delhi, Company is an ISO 9001 system based Company. MVS is 31-Years old Turnkey Supplier of skid mounted Gas generators and compressed air drying units.involved in Design & manufacturing program covers a complete range of equipment. Like
PSA Nitrogen /Oxygen Generators, Inert Gas Generators, Exo/Endo Gas Generators,CO2 Gas Plants Air/Gas Blowers, Pollution Control systems, Ammonia Crackers, Air Heaters, Gas Purification Units, Gas Drying Units, Heat Exchangers, Sintering Equipments and Hydrogen Plants, Furnace, Washing Equipment, Fabricated Tanks & Vessels.
Position Title : Sr. Project Engineer (Design & Marketing)
Specialization : Equipments are Designing & fabricated following good engineering practices as per
EN / ASME , standards and manufacturing is carried out in following steps. Assemblies of all equipments on skids Pressure Testing/ Radiography as per code requirement. Interconnecting Piping, Erection, commissioning.
Nov.2003 to June 2007
Company Profile : Meenakshi Associates (P) Limited. Company is an Authorize ASME “ U ” & ‘’R” stamp certified company, also an ISO 9001-2008 quality certified & ISO 14001-2004 environmental management system certified. A leader in one of the largest and fully equipped engineering units suitable for Designing, Procurement and Manufacturing of all type of Heat Exchangers Process- condensers, air gas receivers and high pressure vessels, columns, Towers Reactors and Liquefied gas cylinders, Storage tank in the core industry segments like refineries, Petrochemicals, Fertilizers , Oil & Gas Chemicals. Company recognized for our unparalleled quality, delivery, technical capability and reliability in producing the highest quality products.
Position Title : Design Engineer
Specialization : Detailed process, Thermal & Mechanical Design, Marketing of Heat Exchanger & Pressure Vessels in relevance to ASME &TEMA Submission & Approval of document from client, like NTPC, IOCL, ONGC, HPCL, PDIL, EIL etc. Detailed technical discussion with clients for approval of documents. Co-ordination with other departments for manufacturing of equipments.
I.T. Skills :
Software : PV Elite
Operating system : MS-DOS, Window
Major Project Under Taken :
“Modeling of jet mixed tank”
Plant Training :
1. Under six weeks IPT in IFFCO, Phulpur In Allahabad (U.P.). Here I worked in Ammonia plant & other Associate plant, Scheduled from 06/07/2001 to 16/08/2001
2. Undertook an industrial training Scheduled from 26/02/2002 to 28/03/2002 at
Sir Shadilal distilleries & Chemical works, Mansurpur, Muzaffarnagar (U.P)

DATED SANJEEV VERMA

[Guest]

I am a diploma mechanical engineer aged 37 years serving 5year in a state PSU thermal power generating sector. Can I apply for job in GAIL?

You can get the current opening details in the below link
http://www.gail.nic.in/final_site/current_opening.html

If you have required eligibility criteria as per given on the recruitment notifications, you can apply.