www.qssindia.com Quality Services & Solutions Nasik : Inspection Engineer

[Admin]

quality services & solutions
http://www.qssindia.com

Designation: inspection engineer
Experience: 5 - 10 Years
Location: Nasik

Job Description
inspection of fabricated componants as per fabrication drawings,welding inspection, review of UT/RT reports.

Desired Candidate Profile
DME with 8-10 exeprience in inspection of fabricated equipments, pressure veseals and heavey fabricated machinary. inspection of cement plant machinary equipments, structurals.

Company Profile
We are third party independent inspection company, with Corporate Office in Mumbai and having 24 offices all over India. We provide services in 4 sectors ' Engineering, Agricultural, Minerals/Fuels, TQM.

Address:
quality services & solutions
Mandar, 2nd floor
Shivaji Nagar,
Thane,Maharashtra,INDIA 400602

Email Address: engg_mum@qssindia.com
Keywords: qa qc n

[Guest-IJT]

Name : VINAYA.M.H
Email : vinayamh1984 AT gmail.com
Designation / Skillset : Mechanical inspector,Inspection engineer/Mechanical QA/QC inspector/Piping & equipments & Inspection engineer , Design engineeer,
Resume of Mechanical Inspector QA/QC/Inspection Engineer,(Piping & equipments)

Resume :
Education & Qualification :
- B.E. Mechanical Engineering Acharya Institute of Technology, Bangalore,
- Diploma in Mechanical Engineering(DME)
- AutoCAD, Unigraphics,

Computer Knowledge :
- MS-Office 2000 (MS Word, Excel, PowerPoint)
- Windows-7 and Windows XP,
- VARICAD, AutoCAD, CAD/CAM,INOVX(RealityLINx),

Summary of Experience :
Three years experience in Quality Control /Supervision/Inspection with construction companies in India and abroad
- Responsible for entire inspection activities of Mechanical equipment, Piping, Welding, Fire fighting System and Painting / Insulation.
- Well versant with International Standards such as ASME B31.1,31.3, ASME section IX, ASME section V.

Presently working in Saudi Kayan TML project using software RealityLINx 5.4(INOVX).
2011-till date Company : Saudi Kayan Petro Chemical Complex
Project : Saudi kayan TML/CML
Position : Inspection Engineer

2010-2011 Company : DAELIM
Project : Saudi Kayan (HDPE)
Position : Mechanical Inspector

2009-2010 Company : KBR Kellogg Brown Root Saudi Ltd.
Project : Saudi Kayan Olefins Project (SKOP)
Position : Mechanical Inspector

2008-2009 Company : PRECITEC, (Bangalore),
Position : Design Engineer(Special Purpose Machines)

Duties and Responsibilities (Inspection Engineer)
- Creation of Corrosion loops and circuits, TML placement ,and Inspection Drawings and by 3D Modelling using RealityLINx 5.4 software for plants (EOEG, U&O, PP, OLEFINS, HDPE, PHENOLICS AND POLYCORBANATES)
- Make Corrosion loops highlighted on P & IDs using marked PFDs.
- During marking from PFD to P&ID checking the material of process line and make correct marking of complete process according to API 570 standard procedure.
- Extract all construction isometric drawings from the server and convert them in to inspection drawings using Micro station and AutoCAD.
- All vendor equipment drawing are has to be converted to inspection drawing.
- Placing TML’s on equipments and piping components using highlighted/marked P & IDs and PFDs.
- Making Knowledge Views of TML marking points for field verification in a arranged order or clear view of TML’s on Equipment and piping lines.
- From go through these knowledge views inspection has to be done in site on equipments and piping using UT method respective to given equipment numbers and line numbers of piping.
- After getting all TML’s readings verify the Thickness of material given in Vendor drawing or According to material specification for schedule of material how much thickness is given in API standards, collect that data’s and check the readings which have to be taken in site .
- If the comparison reading between actual taking in field and Standard given is within the limit of allowance standard thickness then it is accepted .
- If the reading is giving more differences then further action to be taken .
- After this making a correct TML’s readings Data sheet with respect to Equipments and pipe line numbers and submit these documents to client.
- Inspect the all final files before sending to client.
- To maintain the project status, handling of queries and Client feedbacks.

Duties & Responsibilities (Piping Inspector) :
- Working as a Quality Control Inspector and responsible for the entire piping erection inspection as follows; material inspection at ware house prior to issue for fabrication, visual inspection of welds verify the use of approved welding procedure specification, co-ordination with the third party inspectors and witness welder performance qualification test (PWQT) in accordance with ASME Sec. IX also witness procedure qualification test (PQR) including tension and guided-bend tests, hardness tests For the qualification of WPS in accordance with ASME Sec. IX and project specification.
- Verify test results of non-destructive examination, Review Radiographic Films at site and fabrication shop, RF pad leak testing, internal pipe cleaning, blasting and painting, Piping line check prior to hydro test and verify the installation of valves, direction of valves, identification tag and type, rating of flanges, supports, fittings, gaskets, drains, vents, blind flanges and gaskets etc, and material as per drawing and approved procedures.
- Prepare punch list prior to hydro test and final mechanical completion check. Final line checks with client prior to hand over the system.
- Review hydro test packages and verify the following; NDT completion, weld map/summary, radiography reports, checklist, valve list, P&ID showing test limits, isometric drawing, support details drawing, review line history sheet
- Verify all NDT examination records, material traceability record, pressure gauges calibration certificates, safety relief valve calibration, manifold test record, etc.
- Witness hydrotesting, evaluation of test package contents against drawing requirements to ensure completeness and accuracy of the piping system, verification of closed punch items and conduct walk through for each completed piping system prior to mechanical acceptance, final painting inspection of piping and structure steel pipe rack prior to handing over the piping system, fire fighting system piping installation, and witness the demonstration of sprinkler system.
- Review sub-contract to verify the documentation/records is complied / maintained as per approved procedure, and prepare finding during auditing and reports to QC manager.
- Responsible for static equipment erection inspection as follows; foundation elevation inspection, pad plate elevation check, equipment elevation, verticality, and verify foundation and equipment centre lines, bolt tightening and grouting, internal tray inspection to confirm proper gap, level according to vendor’s drawing and bolts tightening.
- Monitoring and inspecting the erection works by the subcontractors including piping, welding and insulation and co-ordination with client and subcontractors for the quality issues and issuing NCR’s when non-conformity activities were noted by the subcontractors.

Duties & Responsibilities(Mechanical Inspector) :
As a Rotating equipment Engineer, inspecting the alignment activities and invigilating site activities as per PIP 686. Supervision of positioning and levelling at machinery and clearing the queries related to maintenance aspects through all dimensional verification. IPMT (Integrated Project Maintenance Team) leads to good destination at Plant building activities.
- Alignment of all Equipment with respect to motor (Using Rim and face method, Reverse indicator method.)
- Assembly of Mechanical Seal (Single/Double) and Stuffing box.
- Servicing the Steam Turbine and Gas Turbine.
- Assembly of Gear Boxes (Agitator, Conveyer, Bucket elevator and etc...).
- Assembly of pumps centrifugal (Single Stage & Multi Stage) Reciprocating and Rotary pumps.
- Servicing the centrifugal compressors ( single, multi stages) Reciprocating & Screw compressor
- P&I Drawings & Isometric Drawings For Various Pipe Routing To Be Study
- Pipe Routing & Support For Different System To Be Checked In The Site
- Air Blowing & Water Flushing For Different System Cooling Water, Sea Water, Fuel Gas System, Demine System, Butane System, Propylene System, Waste Water System And Condensate System Etc...
- Jet Cleaning To Be Done For Various Pipe Line Using High Pressure Water
- Mechanical Running Test Of Different Pumps Cooling Water, Sea Water, Boiler Feed Water, Demine System, Condensate System and Air compressor Etc...
- Leak Test for Fuel Gas System, Sea Water Chemical System, Boiler Chemical System Etc…
- Chemical Injection for Cooling Water, Sea Water & Boiler System
- Steam Blowing For High Pressure Steam, Medium Pressure Steam, Low Pressure Steam Lines To Be Done Successfully
- Boiler Start Up Work To Be Done In This Project
- Steam Turbine Start Up Work For Various Type Of Turbine To Be Done Successfully
- Psa System Start Up Work To Be Done Successfully
- General maintenance and trouble shooting of failures of process Equipment.
- Scheduling of preventive maintenance and carrying out of works as per schedule.
- Maintaining of History reports of individual mechanical Equipment for failure analysis. Reporting to Engineer.
- Having the experience in types of heat exchangers (shell &tube, plate type, fin-fan coolers)
- Servicing Gate Valve, Ball Valve, Globe Valve, Diaphragm Valve, M.O.V, N.R.V etc…
- Running maintenance, Breakdown maintenance, Start up and Shutdown maintenance of plant.
- Work operation & Maintenance going through PSMS (Process Safety Management System).
- Fire fighting and H2S Safety procedures & self contained breathing apparatus course done.

Experience in India :
1. MULTI SPINDLE DRILLING MACHINE
Client : LARSEN & TOUBRO LIMITED, HAZIRA- GUJARAT
Tool : Auto Cad,
Role : DESGIN ENGINEER,
Description :
This is a machine which made a many no of drills at a time at different pcd’s . The machine is totally with conveyor system, PLC based.
Responsibilities :
1 Handling project combinable with design chief.
2 Preparing of DAP drawing.
3 Design and detailing of the same.

2. ROTARY INDEXING TABLE(RIT)
Client : LARSEN & TOUBRO LIMITED. Kalpakam
Role : DESGIN ENGINEER.
Tool : Auto Cad,and Varicad
Description :
This is table used for indexing the job for required angle where job is hold on this table, which gives accurate indexing ,this table is fixed on Milling machines for typical jobs applications.
Responsibilities :
4 Handling project independently.
5 Preparing of DAP drawing.
6 Design and detailing of the same.

3. VERTICAL TURRET LATHE(VTL)
Client : LARSEN & TOUBRO LIMITED, Oman
Role : Design engineer
Tool : Cadian Mech and Varicad
Description:
This is a lathe but here job is constant , tool is rotating, which is plc controlled machine.
Responsibilities:
7 Handling project combinable.
8 Preparing of DAP drawing
9 Design and detailing of the same
Duties and Responsibilities: I am working as Design Engineer in

PRECITECT :
I handled 3 projects, first is ROTARY INDEXING TABLE (RIT) FOR 90 degree rotation, which is specially ordered by customer, and this project is “INDIVIDUALLY HANDLED”, but second one is handled by combined with my colleague. In RIT project I did all drawings of RIT designs and according to that drawing dimensions in

PRODUCTION UNIT I get all parts and these parts are assembled and checked by the QC ,finally project will completed. I handling this project from start of design to assembling and Quality Checking. RIT uses in industries is to get accurate indexing of jobs when job are holding on table of Sliding, Milling machines etc, and individually also this table is used. And in SLIDING UNIT ATTACHMENT is a extra attachment unit for SPM machine which is designed for costumer requisition, this is handled by combinable with my colleague, this project also completed. Now working on VERTICAL TURRET LATHE (VTL)

Development project for 1000dia job. and we are using CMTI DESGIN BOOK for calculation of stress, power, gear calculation, and design purpose.

[Unregistered]

Curriculum Vitae
NITESH NIMJE
E-mail ID : niteshnimje0115 AT gmail.com

CAREER OBJECTIVE :
To pursue a career in the field of quality & audit where I execute my skills, experience and solution oriented approach towards enhancement to the organization.

EDUCATION :
TECHNICAL :
BE (Mechanical Engineering) from NRI Institute of Information Science Technology BHOPAL (M.P.) Rajiv Gandhi Technical University Bhopal in June 2010 with 69.4%. This collage affielied to AICTE New Delhi

ACADEMIC :
H.S.S.C (12th) from MP Board in 2006 with 74.70%.
S.S.C (10th) from MP Board in 2004 with 67.80%.

ACADEMIC PROJECT :
Project : Electricity Generated By Speed Breaker

INDUSTRIAL TRAINING :
Industrial training from
Company Name : Raymond Textile Division Borgaon, Chhindwara (M.P)
Company Department : Boiler Plant
Duration : 2 months

COLLAGE PARTICIPATION :
I participated the Entrepreneurship Awareness Camp
Duration : 3 Days

EXPREIENCE :
** BADVE AUTOCOMPS PVT LTD.GROUP SUMEDH TOOLS PVT LTD CHAKAN From 13th Oct. 2010 to 10th Aug. 2012date as Quality Engineer in QA department.

** ANUDEEP INDUSTRIES :
All types of precision components pressing & fabrication
** Anant extrusions ltd Kalmeshwar, Nagpur
Pvc pipes manufacturer
JOB PROFILE :
** Receiving Inspection
** In process Quality
** New fixture report made & maintain
** Customer complaints
** TS – Documentations etc
I am working as a quality engineer in QA department
KNOWLEDGE :7QC, Why Why Analysis,5s , vernier calipers, micrometer, plug gauge etc.

TECHNICAL SKILL :
** Automobile Engineering

COMPUTER SKILLS :
** Application - MS Office 2003,2007
** Auto Cad - 2004
** Basic knowledge of Internet Explorer

STRENGTHS :
Positive Attitude, Work Passion and Great Competitors

PERSONAL DETAILS :
DOB : 28/10/1988
Father’s Name : Shri Vishnu Nimje
Languages known : Hindi, English, Marathi.

I hare by declare that the above information given by me is true to the best of my knowledge.
Thanks & Regards,
Date :
NITESH NIMJE