Al-Hoty Est. Saudi Arabia : QA/QC Engineer

[Admin]

Al-Hoty Est.
http://www.al-hoty.com

Keywords: Independent Testing laboratories

Designation: QA/QC Engineer
Experience: 3 - 5 Years
Location: Saudi Arabia
Compensation:
U.S Dollars Less Than 5,000
Education:
UG - B.Tech/B.E. - Any Specialization;Diploma - Chemical, Civil, Mechanical
PG - Post Graduation Not Required
Industry Type:
Construction/ Engineering/Cement/Metals
Functional Area:
Production, Maintenance, Quality
Posted Date: 16 Sep 2008

Job Description
Civil/Mechanical equipment calibration and carry out QA/QC audit and implement QMS as per ISO-9001/ISO-17025/ISO-14000

Desired Candidate Profile
Civil/Mechanical equipment calibration and carry out QA/QC audit and implement QMS as per ISO-9001/ISO-17025/ISO-14000

Company Profile
Saudi British testing Laboratory

Address:
Not Mentioned

Email Address:
jobs.ahsl@al-hoty.com

Telephone:
Not Mentioned

[Guest]

RESUME
SHOUKATH ALI
Shoukath_ktpm@yahoo.com
Ph No:- +974-5719573, +91-494-2609285, +91-9961166500
Parathodi House, Pazhur P.O,
Kuttippuram, Malappuram – 679 571,
Kerala State, INDIA
Pin:- 679571
________________________________________________________________
OBJECTIVE
I am confident that my skills and past experience would make great contribution to your organization. Therefore I would appreciate the opportunity to discuss my qualification for this position in greater detail with you in person at your earliest convenience.

PROFESSIONAL EXPERIENCE AND EXPERTISE
1. Present Company : “DUCHES BABCOK ALJABER”

Project : SHELL PEARL GTL PRLJECT – EFFLUENT TREATMENT
PLANT

Owner : QATAT PETROLIUM AND SHELL

Position : QA/QC Engineer

Description:
The project mainly involved in different size of cone roof storage tanks-material -carbon steel, and above ground and underground piping works of different materials-Carbon steel, Stainless steel, Glass reinforced plastics.etc are concerned to me

Duties:-
- Checking & Approval for WPS, PQR and initiate corrective actions to be done.
- Preparation and implementation of quality procedure and quality manual
- Conducting periodical internal audit.
- Coordinating with third party inspectors and client.
- Coordinating with third party inspectors and client.
- Witness for Welder Qualification Test.
- Preparation and approval of inspection test plan.
- Inspection of received materials
- Mechanical inspections and weld joint testing on tank and piping works according to the ITP, method statements, project standards and codes
- Carrying out Visual Inspection on shop and field weld
- Monitoring welding consumables
- Co-coordinating with NDTCo-ordinator for conducting the NDT- NDTrequest, interpretation and documentation.
- Inspection of Heat treatment cycle using WPS, Procedures & codes
- Review Percentage of RT shoot for welder or welding joints.
- Checking documents for test packages with client. Included P & ID, iso., welding Summary, material take off and all reports for hydro test, punch list.
- Modification of isometrics according to site situation and make as built.
- Carrying out punch list and checking if points (A) closed.
- Codes: " ASME IX, ASME B 31.3, BS2654, API650, API620 ,API 1104 & AWS D1.1


PREVIOUS OCCUPATION (INDIA)
From AUG 2006 Till Jan 2008 work with “V&H FABRICATORS PVT.LTD”, Indore, Madyapradesh,

Project : 7MT Expansion project sinter plant-2, lime
calcinations plant

Owner : JSW Steel Limited, Bellary, Karnataka

Position : Project Engineer-Structural

Description:
The project mainly involved in structural fabrication, erection and alignment work of both building and technological structures, such as columns, rafters, tie beams, bracing, crane girder, ECT.

Duties:-
- currently responsible for project execution for the Engineering&construction of fabricated structures
- Prepare, deliver and monitor project plans, budgets, schedules, deliverables and manpower estimates
- Preparation and supply of material indents, bolt lists & bought out items list to the store management
- giving instructions to supervisors for Procurement and collection of all steel materials(Free Issue Items) from stockyards/ Purchaser’s stores, including loading, transportation, unloading , stacking and storing on skids or supports according to the look ahead schedule
- According to the front availability & urgency planning the fabrication & erection of the erection marks and giving instructions to supervisors to achieve the target
- Take appropriate action, where necessary, to ensure targets of Quality, Cost, Time and Safety are met.
- Implement project strategy; produce weekly management reports and the Engineering Scope of Work
- Act as a focal point for Vendors and Engineering Contractor by ensuring timely delivery of services, materials, equipment, work packages, drawings etc.
- Preparing & claiming bill for the marks fabricated and erected

STRENGTHS:-
- A pro-active team player, with excellent motivation and interpersonal communication skills
- Adept at coordinating all project aspects to the approved schedule, deadlines and budgets
- Accustomed to ensuring work completed in accordance with quality standards and regulations.
- Strong in the efficient management of Contractors, Sub-Contractors, Fabricators and Vendors, to ensure compliance with project scope and delivery schedules.
PROFESSIONAL QUALIFICATION:

C-SWIP3.1 welding inspector : TWI-UK- 2009 March

Bachelor of Engineering (mechanical) : 2006 batch Anna University, Chennai,
Tamilnadu, India.

Diploma in Engineering (mechanical) : State technical board, Kerala , India.


COMPUTER LITERACY:-
- Microsoft Office ( Word, Excel, Outlook & Access)
- AutoCAD, Cad Cam
PERSONAL INFORMATION
Name : Shoukathali.p
Nationality : Indian
Age and DOB : 23 years and 28 Feb 1985
Sex : Male
Marital Status : Single
Passport No : F7316083 Valid up to 05/04/2016
Languages Known : English, Hindi, Malayalam, and Tamil

DECLARATION:

I hereby declare that the details furnished above are true to the best of my knowledge.

Place: doha
Shoukathali.p
Date:

[Guest]

RÉSUME
OF
Joseph. Arul Winstone Devadhas

E-mail

pearlsdevan AT gmail.com
arul_rpondt AT rediffmail.com

Contact No.
Work : +967-735680136
Home: +91-4637 231813

Permanent Address
1762 A. Luther Mission Church Road.
Vadakangulan.
Trinelveli dist, India
Pin 627116.
Personal Information.
Sex : Male
Nationality : Indian
Marital Status: Married
Languages : Tamil, English
Hindi& Malayalam .
Passport Details
Passport No. : E1394091 Date of Issue : 09.03.2002
Place of Issue : Trichy Date of expiry : 08.03.12
Old Passport No. K.283022
Extra Curricular Activities
Type-writing - English
S/w Knowledge - MS- Office
Hobbies
- Listening to music
- Reading books
Major Strengths
- Hard Working
- Punctuality
- Sincerity
- Team management


Objective
Intend to build career with leading corporate of hi-tech environment with committed and dedicated people, which will help me to explore myself fully and realize my potential and to contribute my education and management skills in a position with a growing and dynamic firm.

Position Applying for
- NDT COORDINATOR. / Radiation Protection Officer.
- QA/QC Engineer / QMS Lead Auditor


Experience
1. Engineer (QA/QC & HSE).
April 2009 to till date with Betim Energy and construction Ltd, Yemen. for Jabal Salab project . Mareb. Cross country pipe line

2. NDT Engineer and Radiation Protection Officer,
August 2007 to Feb 2009 with Gama Industrial Plants Manufacturing and Erection Inc . Yemen Branch
- YLNG Project, Republic of Yemen

3. NDT Coordinator . April 02 to July 07 with Supreme Excel NDT Services. Trichy , India.
- Bharat Heavy Electrical Ltd, Trichy
- Nuclear Power corporation of India Ltd, Koodangulam.
- Madras Refinery Limited. Chennai.
- Indian Space research organization, Mahendragri.
BSTAB project at the Bintulu Integrated Facility, Bintulu Crude Oil Terminal, Sarawak. Malaysia.
( short period 2 months).

4. QC Inspector, 2 months shutdown work with Industrial Support Service, SASREF KSA

5. QC Inspector ( Painting) 8 months short period. With CCIC , Abu Dhabi OGD II, ADNOC Project
Both these short term jobs were done during the above service period.

6. NDT Trainer. Jan 1999 to March 2002 in Excel Institute of Technology , Trichy in following job sites.
- Faculty member in Institute.
- Sivanantha Steels , Trichy.

7. NDT Inspector . Feb 96 to Jan1999 with Al Hoty Stanger Ltd. K.S.A (Third party Inspection company and independent lab). Some of the projects were
- Alshuwair , Dam am , K.S.A
- SADAF, Expansion Al-Jubail, K.S.A
- SASREF ,Al-Jubail, K.S.A
- TEKFEN, Damam. KSA. Cross country pipe line.
- Al Zamil , Damam. KSA.
- All Kadi , Damam, KSA
- Major S. Aramco Projects KSA etc
.


7. NDT Coordinator, Jan1995 to Oct 95 with NDT CCS, Abu Dhabi for OGD I.
. QC Inspector( Painting) , March 1993 to October 1994 with CCIC Yemen for Yemen Masila Export Project.

9. Sr. NDT Technician. Jan 1990 to 1993 with WENS NDT Services , Madras.
- Indian Space search Organisation, Mahendragiri.
- National Thermal Power Corporation Ltd. Rihand.
- NTPC Ltd, Singrauli.
- Tamil Nadu Petro Products Ltd .
- Hindustan Petroleum Ltd, ( Cross country Pipe Line) .


10. NDT Technician March 1983 to Nov 1989 with National Radiographers,
Madras.
- National Thermal Power Corporation Ltd. Singrauli.
- National Thermal Power Corporation Ltd. Vindyachel.
- Hindustan Petroleum Ltd . Madras.
- NTPC Rihand ,
- ONGC Narimanam (Cross country Pipe Line)
- Madras Refineries , Madras.
- Cochin Refinery , Cochin.

Nature of Duties, Responsibilities and Knowledge gained.

Summary of Experience.

22 years of comprehensive experience in major Inspection Activities with Construction Companies and Inspection companies in the field of oil and gas fields in Onshore, offshore, Chemical plants, Cross country pipe line, Refineries, Fertilizer plant, Thermal power station, Atomic power Stations & Faculty in NDT Institution. During the period of service my nature of duties and responsibilities are as mentioned below.
9 years in the capacity of QA/QC Inspector/ NDT coordinator.
2 years in the capacity of QA/QC Inspector ( Painting)
4 years as Faculty member in NDT & HSE Training Center.
7 years as NDT Technician.

As NDT COORDINATOR:

- Radiographic Film Interpretation.
- Planning for NDT Methods as per Quality Plan.
- Crew allotment based on the quality and quantity requirements, by considering their capability.
- Maintaining All NDT Records and documentations.
- Co- ordination with clients and internal staffs.
- Getting accepted some problematic results (either on weld or NDT quality) by client or third party inspectors when border case issues arise.


As Radiation Safety Officer:
- Monitoring of Radiation Safety Complaints and follow up with site team.
- Radiation Safety as per ICRP and Local Regulations, (Import license of isotopes in my name.)
- Conducting regular Radiation safety meeting to get proper coordination with NDT crews. Routine check of exposure devices and survey equipments.
- Solving problems regarding Radiation Safety with Client (YLNG) and Local radiation authority (NATEC) safety representatives to meet the specified requirements.
- And relevant Documentations .

As QC Inspector :
- Welding and Piping inspection, Visual inspection of welding, Visual Inspection & Dimensional Inspections of structures. Stage inspection as per quality plan.
- Ensure the correct heat number on both pipe & supports.
Inspection of pipe fabrication & installation in fabrication shop & field
Witnessing hydro test for piping.
Ensure quality control of spools & supports for both fabrication &erection as per specification.
- Inspection, witnessing & monitoring work activities and if required take preventive actions to ensure a satisfactory solution and smooth progress as per QA/QC norms.
- Assist QA/QC engineer in internal/external audits as well as the Welding engineer to conduct the PQR, WQT.
- hydrostatic pressure testing of pipe & pipe lines as per specification
- Regular checking of main backing oven, holding oven & portable oven for electrodes.


AS Painting QC:

- Checking surface profile after blasting , Temp, paint mixing and equipments
- WFT,DFT recording, Scratch Test Impact Test.
- Painting , Coating & Holiday Testing Inspection.
- Maintaining relevant Quality Records.

As Faculty Member.

- NDT Operations & Training , ASNT Level II program arrangements.
- Evaluation of candidate’s eligibility by qualification and experience.
- Documentations.


As NDT Technician:
- Acquired good knowledge in conducting NDT methods such as RT,MT,PT & UT.
- Have vast experience in conducting NDT on Structural , Piping ,Cross country pipelines , Tanks and Vessels.
- Handled more trouble shooting jobs in various projects .
- Handled various types of NDT Equipments.

Education & Credential
- Diploma in Mechanical Engineering . 3 years. State Board of Technical Education and Training. Tamil Nadu . India.

- Industrial Radiographer (RT-1) .Certificate no 1013 Jan 04-1986
BHABHA ATOMIC RESEARCH CENTRE, MUMBAI . (Govt of India) .
- ASNT-Level II in RT, UT.,MT, PT & RTFI
- Diploma in Industrial Safety, Chennai, India.
- Proficiency in Elementary First Aid, Tamilnadu Marine Academy, Thoothukudi, India.
- Radiation Protection Officer by National Atomic Energy Commission . YEMEN. (approval by Exam) .
- Lead Auditor ISO 9001 – 2008 from IRCA (UK)
- CAWI from American Welding Society , Certificate # 09041854.
Re test given for CWI certification by Oct 09

Seminars and Training Courses Attended.
- Seminar on NDT Methods RT,UT,MT & PT to Qualify as per ASNT-TC-IA & CP 189. ( Refresher course).
- Seminar on Radiographic Film Interpretation.
- Seminar on Welding inspection.
- Training on WQT,WPQT witnessing & WPS.
- Seminar on industrial Painting ,coating Inspection and Holiday Testing.

- Radiographer Course Conducted by Bhabha Atomic Research Centre, India.
- Seminar on NDT methods. ,RT,MT,UT&PT Conducted by IQC,1991. India.
- Mandatory Life study carried out at various LPG Bottling plants in India, such as Indian Oil Corporation Ltd, Hindustan Petrochemicals Ltd & Bharat Petrochemical Ltd.
- Attended a Course in Environmental Awareness, H2S Safety & Working at Height .YLNG Project Training Center. Technip, Yemen.
- Welding Inspection by American Welding Society at Betz Zone , Chennai.
- Lead Auditor seminar to qualify as per IRCA(UK) norms by Quest Certification Chennai.
- Attended Emergency First Aid Course Conducted by OGD ADNOC,
Abu Dhabi.

Achievements during my Service period :
When worked for Indian Space Research Organization, India the Radiographic team which lead by me achieved the quality which the client specified ( 2 -2T) for SS pipe Line by 1990 , four of other companies were disqualified before us. Third party was BV
When working for Oil and Natural Gas commission , Narimanam project as client completed the work with stipulated time with less man power which reduced the cost for our organization.
When working for CCC , Yemen As painting QC , even though it was new field for me, by the instruction of my Sr. Engineer carried out the job and no NCR was received where other activities received NCs
When working for sub contractor some instances some miss interpretations were got accepted by client by giving valuable arguments.
While working with some organization acted as Management Representative for Internal and External auditing and acquired good knowledge.
While working as Radiation Protection Officer no NC were obtained either from client or the local Authorities who would be always in site whilst the job in YLNG project. ( Work in case of safety , training of workers and maintenance of Equipments )
When worked with sub contractor of YLNG as NDT Engineer first 5 months with very less manpower carried out the work ,and by selection of able manpower and carried out the NDT team in nice way.
My nature is to have good relationship with clients and sub contractors and solved the problems in polite manner when ever some issues raised, The same way have good friendly relation ship with co workers to get done the jobs.
Above are some achievements but not all .

.
Extra Curricular
- Acquainted Sufficient Knowledge on Handling of Computer (MS Office)
- independently to carry out any type of QC Related /Office Documents .
- Worked as an Instructor In NDT Training Institute, where gained sufficient experience on training principles.
- Good Managerial and Communication skills.
- Familiarization with International Standards like; ASME, ANSI,API, ISO , OHSHA etc.
- Worked as Managewment5 Representative for Internal Audits

The above information furnished hereby me are true to the best of my Knowledge.


(J.ARUL WINSTONE DEVADHAS)

[Guest Poster]

RESUME

ABDULALEEM.D S/o Abdul khader.D India Mob-9986385007
# 42, Ward No-25 RES: 00918392-245353
Jayanagar 2nd cross Qatar mob: 009745125149
Cantonment, Bellary. 583104 E-mail: abdul_aleem38 AT yahoo.com
KARNATAKA -INDIA

PROFESSIONAL PROFILE:

My experience in fields related to quality check and control, Managing and planning which has given me courage to show my talents and take up challenging roles to work with big organizations.

OBJECTIVE:

I consider myself familiar with Civil Engineering aspects, Confident of my ability to work in a team and of facing the challenges in the competitive environment.

Total experience-5 years
SEP 2007--Till date-- Gulf Contracting Co. WLL. (Doha-Qatar)

QA/QC Engineer
Company profile:-
Gulf Contracting Co. WLL. Is mainly involved in substations, industrial building, airport & multi-storey building projects and is having ISO 9001, OHSAS 18001, 14001 Certification.
Description of projects
1. Substation projects of KAHRAMAA (Qatar General Electricity & Water Corporation), Phase 7 and phase 8.

2. Strategic gas transmission project (Qatar petroleum)

3. Worked with main contractors like Siemens Consortium (Germany), Isolux ingineria (Spain), Punj Lloyd
Job profile:
- Immediate supervisor :- QA/QC Manager
- To follow the Quality Assurance Plan for execution of work.
- To co-ordinate with client for daily inspections.
- To get approval of materials used on site from client, consultant and main contractor.
- To maintain QA/QC records.
- To prepare material submittal (civil/arch.), method statement (civil/arch.) as per specifications (QCS), drawings and coordinating with concern authorities.
- To conduct quality toolbox meeting for execution team.
- To maintain drawing register.
- To co-ordinate with subcontractors for MEP works.

Also, undergone HSE &H2S training.(Safety training)

JOB PROFILE:
- Company: KRISTAL PROJECTS (I) PVT LTD,
- Designation: SITE ENGINEER.
- Period: Since jul 05 to sep 07
- Constructed independently individual villas with full-furnished quality according drawings issued to the site.
- Attempted each and every part of construction starting from marking, foundation, reinforcement, shuttering, block work, plastering, flooring, painting with quality considerations within given period of time.
- Made all the rate analysis and abstract and also work orders before commencement of work and done billing of exact quantity of work to the contractors.
- Conducting tests for construction material, C.C blocks and C.C cubes
- Preparing weekly reports, idle statement to track record of the projects progress.

ACADEMIC QUALIFICATION: B.E (Civil Engineering)
Vijay nagar engineering college. Bellary (V. T U. BELGAUM, KARNATAKA)

B. E Passed with -74.80%

Class of the degree – FCD

Year of passing – 2005


COMPUTER KNOWLEDGE
- AUTOCAD.
- BASICS IN C PROGRAMMING.

CERTIFICATE OF ACHIEVEMENT:
- BAI/APEX High Tech Institute/ VTU undergone training in construction field.

PERSONAL INFORMATION:

- D.O.B: 15 Sep 1982.
- Father’s name: Abdul khader D
- Nationality: Indian.
- Marital Status: Unmarried.
- Sex: Male

Interest- Reading books, internet surfing, music.

Minimum time required for joining – 40 Days.

DECLERATION: I hereby that all the information mentioned above is true to best of my knowledge and belief.

(ABDUL ALEEM D)

[Guest]

Dear Sir,
Regarding the position of QA / QC Engineer, I attached resume which is presented for your consideration
As I have qualification which represents me as an eligible candidate for this. Also I had an experience which I can use for my company’s growth.
Enclosed resume shows my qualification, capabilities and history of my career. So please contact me on 0502187058 or e-mail me on bamurty AT gmail.com / ba_murty AT yahoo.co.in
Thank you for your consideration, I am waiting for your reply.
Sincerely,
Balla Adinarayana Murthy

CV
Targeted Role : QA / QC ENGINEER (CIVIL)
Family name : Balla
First name : Adinarayana Murthy
Date of birth : 9th June 1971
Nationality : Indian
Civil status : married
Contact on : 00966 502 187 058
Email.ID : bamurty AT gmail.com / ba_murty AT yahoo.co.in
Passport # E8754367
Educational qualification : Bachelors degree in Civil Engineering from Osmania University, Hyderabad – India
Computer skills : M.S.Office
ARAMCO SAP # 70004832
Languages Known : English, Hindi & Telugu (Read, write & speak)
Present position : QA / QC engineer – Civil
Years within the firm : since February 1996 to present time
Experience : Presently working in Saudi Kayan – petro chemical plant with Fluor Arabia Ltd / S.A.Kentz since March,2008
2007 to 2008 – worked for permanent communications project at Khursaniyah Aramco plant
2006 to 2007 – worked at Hawiyah NGL plant ( Aramco) for Gas recovery & compression facilities project
2005 to 2006 – worked at Juaymah gas plant ( Aramco) for third party cogeneration inter connection facilities project.
2000 to 2005 – worked at Berri gas plant ( Aramco) for Ethane recovery project, fire water upgrading project & Qatif facilities at Berri gas plant
1996 to 2000 – worked at Abqaiq refinery plant ( Aramco) for support facilities project, upgrading of fire water line & shaybah project. And for short form contracts, combinnaire renovations,concrete repairs at shedgam,udailiyah pgas plants.
All the approvals are attached

[Guest]

CURRICULUM VITAE
JAYA PRAKASH.G
Prakash.qaqcmech AT hotmail.com
prakash.qaqcmech AT gmail.com

S/o P.Govindarajan, Eachankadu, Westrajapalaym (P.O), Attur (T.K), Salem – 636 115, Tamil Nadu, India.
Company M/s Emirates Trading Agency L.L.C. P.O. Box 5239, Dubai – U.A.E
Nationality Indian
Age 27 years
Current position QA / QC Engineer
Experience 7 + Years
Visa status Employment Visa
Year of joining firm 2008.
Qualifications :
- Diploma in Mechanical Engineering State Board of Technical Education and Training.
- Percentage of marks – 85%
- CSWIP 3.1 Welding Inspector level-2 Initial (Reg.No : 3108202 England) in TWI Certification Ltd.
- NDT Level-II (MPT, PT, UT, RT) According to ASNT Standard.

- ISO 9001- 2008 QMS Lead Auditor Course with NABET Reg.No :LQ70105.
- ISO 9001 & 2008 QMS Internal Auditor Course with LRQA in Dubai.
- Diploma Quality Management in Anna Mali University.
Key Work Experience :
Having more than 7 years of experience; Having knowledge about PQAP, QCP, WPS, ITP, MTS, IR, MRIR, NDT, Familiar with ASHRAE, SMACNA, NFPA-250 & 70, PDI, ASME, ANS, API, AWS D1.1, ASTM, ISO and ASNT standards reviewing of MEP drawings. Conducting internal audit with subcontractors, welding Inspection and MEP inspection.
Career Summary :
Nov 2008 – Present

Position : Mechanical QA/QC Engineer.
Company : M/s ETA Mechanical & Electrical Division, P.O Box 5239, Dubai.
Project : Dubai Airport , Opus, Techno Park, Fujarah commercial Complex.
Consultant : IBA, ACG, BSBG.
Oct 2006 – Oct 2008

Position : Mechanical QA/QC Engineer
Company : M/s Al Jaber & Partners W.L.L
Project : Shell GTL Project
Consultant : JGC/KBR.
Oct 2005 – Sept 2006
Position : Assistant QC Engineer.
Company : M/s Wheels India Limited
Department : Quality Assurance
Client : Hyundai, Ford, Toyota, Maruthi and Nissan
Sept 2004 – Sept 2005
Position : Training QC Engineer
Company : M/s Bharat Electronic Limited
Department : Quality Assurance
Client : HVF
Professional Experience :
QA Responsibilities :
- Controlling and distribution of quality management procedures.
- Prepare / Review Quality plan, Related QA/QC procedures. Inspection and Test Plans for Tender submissions and Projects.
- Assisting with Quality manager to internal audit.
- Controlling final contract documents, Drawings and Specifications.
- Review contractor Quality Plan and Quality Manuals to conform to ISO specifications
- Identifying and recording quality problems and reporting to Construction Team as well as Quality manager
- Reviewing contractor PQAP, WPS, WPQ, ITP, MTS and welder qualification continuity records.
- Conducting audit for contractor Quality management system.
- Preparing Weekly / Monthly quality reports.
- Customer satisfaction survey for ongoing projects at the middle and end of project.
- Implementation of Clint / consultant requirement.
- Follow up of all Non-conformance reports (NCR’S) to ensure closure.
- Monitoring the Calibration of Inspection and Measuring Equipment.
- Conducting Induction training for new staffs briefing about company quality management system and
individual job responsibilities
QC Responsibilities :
- To ensure the all works are Inspected and Tested in accordance with Specific Requirements.
- Incoming material & consumable inspection, reviewing material test certificates, preparing MRIR and monitoring the proper storage as per requirement.
- Carrying out stage wise MEP Inspection (First fix, Second fix & Final fix).
- Witnessing the hydro test, Gravity Test, Smoke Test for MEP works and flushing activities.
- Preparing & Reviewing Test packages on system wise.
- Closing of NCN & JSI Clint / consultant requirements.
- Witnessing of WPS qualification, Welder qualification and destructive tests.
- Conducting stage wise inspection like before welding, during welding, after welding on shop as well as field as per approved ITP.
- Ensuring the welding is carried out as per the approved WPS.
- Preparing weld history sheets for the piping job.
- Preparing welder register and analyzing welder performance.
- Performed UT, MT, PT & VT inspections on various construction projects.
- Coordinating with NDT contractor for carrying out NDT tests.
- Final inspection after completion of successive NDT test to prepare the punch list.
- Reviewing the piping job for issuing mechanical clearance.
- Witnessing and certifying Hydro testing of piping.
- Liaison with client representatives for acceptance of the job.
- To manage / improve the effectiveness of Quality Management Systems within The facility, in
The way that all customer requirements are fulfilling.
- Ensure the latest Drawings and ITP in Work Area.
- Monitor the Work activities to ensure the Materials meet as Approved Specification.
- Prepare the Preventive / Corrective action.
- Reports to the Project Manager in Coordination with QA/QC Manager.
- Having Knowledge about CMM, Profile Projector and Hardness tester, callipers height & depth,
micrometers, dial gauge etc..
- Inspection of Casting and Machined Components.
- Used Various Mechanical Measuring Instruments.
- Prepare the Final Inspection Report for Delivery Components.
- Having Knowledge about the Material Identification and Traceability.
Training Courses Attended :
- ISO Internal Audit Training Program.
- First Aid Safety Training Program.
- Quality Circle Training.
- SPC, 5S, 3C, 5Why problem solving Training.
- Employ Involvement Training.
- FMEA Failure Mode Effective Analyses Training.
- TQM Total Quality Management Training.
- Train the trainer course.
- Work to Permit Training.
Computer Literacy:
- Auto Cad.
- Auto desk inventor.
- MS Word, Excel and
- Power point.

[Guest]

Email : - ahsanadsar AT yahoo.co.in
Mohammed Ahsan Raza

Instrument QC Inspector Engineer
As instrument QA/QC inspector Review plans and drawings in accordance with
specifications, codes and standards. Familiar with the International industry codes and
standards related to intrinsically safe systems and electrical systems for Instrumentation
such as; NFPA 70/NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC
60529,IEEE518, IEEE1100, ANSI MC 96.1, ISA RP12.6, ISA RP 12.2.02
Work experience
Company : - Dar Al Riyadh CO LTD (K.S.A) from20.11.2009 to Till now
Position : - Instrument QA,QC inspector Engineer
Project : - Petrokemya
Duties and responsibilities-
- Electrical
1. Installation inspection of grounding cable, inspection of ‘C’ crimp including bitumatic
2. paint coating and tape.
2. Installation inspection of ground rods and resistance test.
3. Installation inspection of duct bank and stub-up conduit.
4. Cable laying inspection in transformer yard.
5. Receiving and installation inspection of equipment.
- Instruments :
1. Installation inspection of stub-up conduit.
2. Installation inspection duct bank.
3. Installation inspection’s belongs to Pilot Plant in JUEG-1.
My experience spans more than 15 year, working in heavy constructions as well as
operational QA/QC instrument inspector Abu Dhabi and Saudi Arabia. The environment I
worked in include major construction activates and decommissioning of old plant
moreover , I was challenging overseeing the day to day activities of maintenance crews
in highly –hazardous petrochemical & natural gas industries.
Prepare daily inspection documents and final acceptance documents prior to project
completion. Maintain close working relationship with the construction personnel and with
the customer representatives
Involved in the pre-commissioning, commissioning and start up both in instrumentation
and operation aspects during the construction phases of the project. Also prepare loop
folder including as instrument index, instrument data sheet, p&id, loop drawing,
elementary wiring diagram, control logic diagram, and control and inter lock narrative,
calibration, and loop checking, of various process control instrumentation.
My past job involved the handling calibration for all projects (lab calibration, field
calibration) in sharq petrochemical plant. Experience in the maintenance of preventive &
breakdown, major, minor shutdown. Loop checking, function check& continuity checking
from field to junction box & control room.
instrument such as level transmitter, flow & pressure transmitters, indicator, etc. All type of
control room panel instrument such as flow & pressure controller, alarm panel etc. (make :
Foxboro, Kent, Taylor, Rosemount, fisher) all type of air, gas and steam regulator. Have
worked on all type of control valve such as flow control, pressure, temp control, and level
controls(make : fisher, Masonilan , Kent-Introl orbit & betties etc) can fully dismantle,
service, replace defective parts reassemble, test and calibrate any type of control valves
actuator valve
positioner and limit switches for example : actuator valve dismantling, replacing old
diagram, gland packing , valve plug and seat if necessary, lapping plug and seat for tight
shut off and body test to process specification requirement .have done all type of cable
glanding, junction boxes termination and testing in safe & hazardous area on classified
enclosures (site junction boxes positive pressure enclosures and control room instrument
termination panels).can carry out any job independently for under supervisor by engineer
and can also handle a work force for routine and major shut down jobs
Company : - A Y T B CO LTD (K.S.A) from13.04.2005 to 17.07.2008
Position : -instrument QA,QC inspector
Project : - Saudi chevron project/Jubail chevron Project
Consultant : - Worley parsons ltd
Duties and responsibilities- Deals with reviewing of al ITP's/QCP/Method Statement
Material Approval prior for project plan preparation. Coordinating with Construction
Supervisor project plan drawing review-having AFC drawing officially approved
Documentation. Represent Company during weekly meeting concerning schedule plan
activity and project plan on all tools and equipment needed for construction. Assigned to
Review all Subcontractor Technical Documentation Circulation prior approval to all
concerned lead official.
Ensured instrument equipment works complied with project specifications, company
procedures, method statements and quality assurance and controls documentation
(strictly implementing the ISO 2000 and ISO 9000). Supervised and monitoring the flow
of inspection on-site and calibration prior to meet the project deadline. Tasks to monitor
all subcontractor activity priors for deadline start of Instrumentation Workload. Able to
analyzed every area to be survey and witness prior for RFI to be offered to the main
client for inspection. Assigned to witnessing repair and calibration of instrumentation,
commissioning of the following equipment : Smart Flow, pressure, temperature, level
transmitters, different control valves, pressure gauges and Fire & Gas alarms. Analogue
and digital controllers Fire&Gas detection/protection systems, ESD (Emergency
shutdown), Pneumatic and hydraulic shutdown panels and control systems. Project
Duties included review of loop folders for final acceptance by the QA/QC Dept. before
transferring to Commissioning.
To undertake inspection of vendor skids before final acceptance by client. On-site audits
of subcontractor. Fully conversant with relevant International (ANSI, ASTM, API, BSI
IP, ISO, IEC, IEEE etc.) stan
Company : - S.A.Kent.co(24.03.2002to26.12.2004)
Position : - QA,QC Inspector (instrumentation)
Projects : - Rastanura Aramco Refinery
Duties and responsibilities : - Review plans and drawings in accordance with specifications, codes and standards. Familiar with the International industry codes and standards related to intrinsically safe systems and electrical systems for Instrumentation such as; NFPA 70/NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC 60529,IEEE518, IEEE1100, ANSI MC 96.1, ISA RP12.6, ISA RP 12.2.02 - Conduct activities and inspection in accordance to Project Quality Assurance Manual and Quality Control Inspection Plan. - Monitor daily discipline activities and verifies compliance to project procedures, specifications and standards. Identify quality problems, reject non-conforming items and initiate, recommend or provide solutions to the problems with customer sanction / approvals through designated channels.
As Per International & project Standards, Specifications, Instrument Calibration Method of Statement & As Per Approved Project Drawings Supervised, Inspected & Witnessed calibration workshop,DCS Cabinets frame inside RIB’S, Instrument Cable Duct Bank, Cable Pulling from RIB to J.B & Control Room and RGS conduit, Stanchion of instrument devices, Marshalling Panel, Junction Boxes installation, Mounting of instrument devices. Anything not as per Standards or Specification then Making Surveillance or Non Conformance Reports Carried out daily job activities after receiving RFI(Request for inspection) from contractor
Company : - UTS Kent co (10.02.1999 to 04.10.2001)
Position : - QA,QC Inspector (instrumentation and electrical)
Projects : - Gasco&Borouge Petrochemical Ltd Ruwais (Abu Dhabi)
Duties & responsibilities : - Review plans and drawings in accordance with specifications, codes and standards. Familiar with the International industry codes and standards related to intrinsically safe systems and electrical systems for Instrumentation such as; NFPA 70/NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC 60529,IEEE518, IEEE1100, ANSI MC 96.1, ISA RP12.6, ISA RP 12.2.02 - Conduct activities and inspection in accordance to Project Quality Assurance Manual and Quality Control Inspection Plan. - Monitor daily discipline activities and verifies compliance to project procedures, specifications and standards. Identify quality problems, reject non-conforming items and initiate, recommend or provide solutions to the problems with customer sanction / approvals through designated channels.
As Per International & project standards, Specifications, Instrument Calibration Method of Statement & As Per Approved Project Drawings Supervised, Inspected & Witnessed calibration workshop,DCS Cabinets frame inside RIB’S, Instrument Cable Duct Bank, Cable Pulling from RIB to J.B & Control Room and RGS conduit, Stanchion of instrument devices, Marshalling Panel, Junction Boxes installation, Mounting of instrument devices.
Anything not as per Standards or Specification then Making Surveillance or Non
Conformance Reports
Carried out daily job activities after receiving RFI(Request for inspection) from
contractor
Company : - S.A.Kent Co( K.S.A), from 15-04-1996 to16-09-1998
Position : - Inst Tech & QA, QC Inspector
Project : - Rastanura Aramco Refinery (Rahima)
Duties And Responsibility : - Review plans and drawings in accordance with specifications, codes and standards. Familiar with the International industry codes and standards related to intrinsically safe systems and electrical systems for Instrumentation such as; NFPA 70/NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC 60529,IEEE518, IEEE1100, ANSI MC 96.1, ISA RP12.6, ISA RP 12.2.02 - Conduct activities and inspection in accordance to Project Quality Assurance Manual and Quality Control Inspection Plan. - Monitor daily discipline activities and verifies compliance to project procedures, specifications and standards. Identify quality problems, reject non-conforming items and initiate, recommend or provide solutions to the problems with customer sanction / approvals through designated channels.
As Per International & Saudi Aramco Standards, Specifications, Instrument Calibration Method of Statement & As Per Approved Project Drawings Supervised, Inspected & Witnessed calibration workshop,DCS Cabinets frame inside RIB’S, Instrument Cable Duct Bank, Cable Pulling from RIB to J.B & Control Room and RGS conduit, Stanchion of instrument devices, Marshalling Panel, Junction Boxes installation, Mounting of instrument devices. Anything not as per Standards or Specification then Making Surveillance or Non Conformance Report Carried out daily job activities after receiving RFI(Request for inspection) from contractor

Company : - ICB LTD, from 22nd Dec. 1994 to 9thSept1995
Position : - Instrument Foreman
Project : - SPL Nagothane Raigadh(India)
Job responsibilities: - Supervise field construction project related to instrumentation. Responsible for the preparation of instrument, take off material and drawing needed in the project. Installation of cable tray , conduit, Impulse Tubing and Instrument air line. Responsible for Installation & calibration of instrument, loop-checking , megger and continuity testing of cable. Supervise termination of primary/secondary cable and PLC panel and junction box.
Company: - P C T pvt Ltd, From 17th oct 1994 to 24th dec 1994
Position : - Instrument Foreman
Project : - S1,sand plateform Hazirah(Surat)
Job responsibilities: - experience in construction installation Bench and field calibration of various smart transmitters.Calibration and loop checking, trouble shooting, pneumatic & electronic analog & digital, like Rosemount, Honey well, Yokogawa, bells control, fisher co, FT, PT, TT, LT, RTD, TC, DPT, Vortex meter, Flow meter, level troll, Esd valves, Controller, switches, MOV, continuity, Glanding and Termination etc,kinds of process instruments.
Company: YokoGawa Blue Star (from 12th jan 1993 to 28th feb 1994)
Position: - Instrument technician
Project: - Nippon Dendro Ispat (Wadkahal)
Job responsibilities: - CALIBRATION & MAINTENANCE OF ALL TYPE OF ELECTRONIC &PNEUMATIC INSTRUMENTS. REPAIR & MAINTAIN ALL TYPE OF PRESSURE, LEVEL, FLOW, TEMP. ETC.SMART TRANSMITTERS .WORKING EXPERIENCE ON DIFFERENT MANUFACTURER’S TRANSMITTERS LIKE HONEYWELL,ROSEMOUNT,FISHER, YOKOGAWA & FOXBORO ETC
WORKED ON ULTRASONIC FLOWMETER XMT868(PANAMETRICS)
WORKED ON MAGNETIC FLOWMETER OF YOKOGAWA MODEL AE 100,200 & 300
WORKED ON VORTEX FLOWMETER MODEL DY,DYA OF YOKOGAWA
WORKED ON MICROMOTION(EMERSON) FLOW TRANSMITTERS
RADAR TYPE LEVEL TRANSMITTER (VEGAPULSE 56K,44,42)
WORK ONCONTROL VALVES OF NELES,MASONEILAN,FISHER,VALTEK
WORKED ON FIELDVUE DVC 6000 SERIES DIGITAL VALVE CONTROLLER(FISHER)
CHECK & CALIBRATE MOTORIZED VALVE(LIMITORQUE & ROTORK)CALIBRATION &
MAINTENANCE OF THERMOCOUPLE & RTD’S
CALIBRATE PRESSURE,LEVEL & TEMPERATURE SWITCHES
CALIBRATE PRESSURE & TEMPERATURE GAUGES
INTERNAL LOOP CHECK OF DI, AI, AO POINTS IN CONTROl TROUBLE SHOOTING OF
VIBRATION MONITORING SYSTEM OF TURBINE & COMPRESSOR (BENTLY & NEVADA
3300,3500, 7200)
CHECK INTERLOCKING
TROUBLE SHOOTING, FAULT FINDING ON PROGRAMMABLE LOGIC CONTROLLER
(PLC)& PESS(PROGRAMMABLE ELECTRONIC SAFETY SYSTEM)
TROUBLING SHOOTING & FAULT FINDING EXPERIENCE ON DCS e.g. TDC 3000X
HONEYWELL & YOKOGAWA CENTUM CS 3000
LOOP TEST OF ALL KINDS OF ELECTRONIC & PNEUMATIC CONTROL LOOPS.
CARRIED OUT PREVENTIVE MAINTENANCE JOB AS PER PROCEDURES
TO MAKE CHANGES IN MAINTENANCE PROCEDURES & WORK INSTRUCTION

[Guest]

Please I am applying for QA/QC job particularly in telecom jobs.

Jingle

[Guest]

MOHAMMAD ABID
Mabid79771 AT hotmail.com,mabid79771 AT yahoo.com
Objective :
To achieve Professional Excellence in the field of Mechanical Technology. Working in dynamic and knowledge gaining environment has always been thrilling and motives for me to move forward.
Education :
Matric from Mohammadi Begum Technical High School Karachi. 1999 Sindh Board “B”
Diploma of Associate Engineering (Mechanical) from Jinnah polytechnic institute Karachi. 2002 Sindh Board 1st Division
B-tech (Pass) in Mechanical from Preston institute of Management Science Karachi. 2008 H.E.C 2.6 GPA
Technical & Computer skills & Qualification :
- Basic Computer knowledge
- Proficient in M.S office, internet and computer maintenance
- AutoCAD 2D & 3D
- Mechanical Desktop 6 training program.
- CAD/CAM
- UGS NX 4.0
- Pro E (WF3.0) (Sheet Metal Parts / Jigs & Dies Designing)
Working Experience :
- Half Man Engineering S.I.T.E. Karachi. 12 Jan2003 to 31 Dec 2004
Assistant Manager in Q/C & responsibility inspection of Automobile parts of Sheet Metal.
- Al-Ghazi Tractors Ltd D.G Khan Plant 28 Feb 2005 to May 28 2007
Executive MII in Quality Assurance responsibility inspection of incoming components from vendorised parts on Assembly line and store
Half Man Engineering S.I.T.E Karachi
Working as a development Manager of automobile parts. Jun 2007 to 2009
Working as Designing & Machining 2009 till continue
Future Vision :
Keep improving my technical knowledge by enhancing my academic qualifications, there by achieving a respectable position in the technical field.

[Guest]

Name : S,Shashidhara
Qulfn : BE mechanical
D/B : 01-06-1958
Exprn : 28 Yrs in QA/QC field
Position : QA/QC Manager for construction project in KSA with Aramco. Sceco & Royal Commission
Salary expected : USD 5000 (Negotiable)
Details :
I have worked in SA in the construction of HV projects & an approved qa/qc Professional with Aramco. Sceco & royal commission. I am having 28 years qa/qc experience including iso auditing. implementation etc.
Place : Bangalore. India

[Guest]

CURRICULUM VITAE

Abdul Majeed Khokhar Attari
- abdulmajeedattari AT yahoo.com
- abdulmajeedattari AT gmail.com
OBJECTIVE :
To achieve excellence through hard work and commitment to my duties. Looking for an organization that provides me a professional environment where I can polish and prove my skills.
Qualifications
2000 Metric M.C. Boys High School Lahore Pakistan
(Specially Got 100% Marks in Math)
2003 D.A.E. (Mechanical Technology) G.C.T. Lahore from Punjab Board of
(DIPLOMA OF ASSOCIATE ENGINEERS) Technical Education Lahore Pakistan
2005 Trade Training (Metallurgy engineering) From Pakistan Institute of Technology
2008 Auto Cad Pakistan industrial technical
assistance centre(PITAC) Lahore.
2011 ASNT Level II Magnetic Particle Examination(MPT),Radiography testing(RT),Ultrasonic testing(UT),Penetration testing(PT)
Sep,2011 ISO 9001 :2008 Awareness Training From TUV Nord Head office Dammam Saudi Arabia
Sep,2011 ISO 9001 :2008 Internal Quality Auditor Training From TUV Nord Head office Dammam Saudi Arabia
2011 Quality Documentational Control Training By Head of Quality Control Erne fittings GMBH KG(Austria) our Head office.
2011 Training on Establishing/Revision of new Procedures/Process Descriptions, work instructions, ITPs, Forms and Generals. By Head of Quality Management System Erne fittings GMBH KG(Austria).Europe
2011 Training on Operating of Computerized Tensile Testing Machine,Impact Testing Machine and Hardness Testing Machine. .(By Head of Quality Control Erne fittings GMBH KG(Austria).Europe)
Computer Skills
MS Office : MS Office, PDA Software, ERP System(Infor AS Bussiness & PPS Software), Lotus Notes
Inter Net : Chatting & Surfing, AutoCAD and other mechanical designing soft wares
Previous Outings (Experiences)
Iqbal engineering company From 2003 to 2005 (As Production Supervisor)
Iqbal engineering company From 2005 to 2006(As Quality Inspector)
Iqbal engineering company From 2006 to 2011(As QA/QC Engineer)
Erne Fittings Middle East, Saudi Arabia From Jan,2011 to still in service.(Head of Quality Control & Quality Planning)
Nature of Hand on Experience
I am working As Production Supervisor of mechanical production department which consist of following workshops.
(1) Machine Shop
This shop consist of following machines.
1. Lathe machine.
2. Milling machine.
3. Shaper machine.
4. Planner machine.
5. Slotting machine.
6. Drill machine.
(2) Metal Parts Production Shop
This shop consist of following machines.
1. Hydraulic Folding press
2. Hydraulic Shearing machine
3. Pneumatic Shearing machine
4. PEHAKA Band Saw
5. Circular Saw
6. Grinding machine
7. Grinding Sand Belt
8. Tube Bending machine
9. Tube Flaring machine
10. ASEA Press
(3) C.N.C Shop
This shop consist of following machines.
1. CNC Milling machine (MAHO)
2. CNC Lathe machine
(4) Heat Treatment Shop
Following operations are done in this shop.
1. Anodizing
2. Annealing
3. Hardening
4. Case hardening
5. Tempering
Responsibilities :
- To manage all the manpower and required resources to provide maximum production & to avoid possible breakdowns & to minimize the stopping in production line.
- To plane the maintenance schedule and to make sure about the daily weekly, monthly and yearly maintenance.
- To prepare spare parts for the replacement to avoid breakdowns.
- To maintain the proper working of machines.
- To improve the quality of the product as per standards.
- To answer and solve the customer complains regarding quality of product.
- To set all the parameters according to customers satisfaction.
Nature of Hand on Experience
I have been worked in Iqbal engineering company as a Quality Inspector with the following responsibilities.
1. Inspection of Pre-Material.
This inspection consists of following steps.
1. Checking & confirmation of Pre-Material's MTCs (Material test certificates.) & other Documentations. Tele them with the standard requirements (ASME,ASTM,EN,DIN,BS or Internal Standard etc) which ever is mentioned in ITP(Inspection and Test Plan).
2. Ensure the Visual, Dimensional, Destructive and Non-Destructive testing of Pre-Material as per Process Description/Procedure and Work Instructions and ITP(Inspection and Test Plan).
3. Do the necessary Documentation(Make NCR or Release the Step in Production Papers).
4. Enter the availed data of material in the ERP System and release the Material for next Process.
2. In process inspection.
This inspection consists of following steps.
1. Check the measurements of the job during different processes as and where mentioned in the working order to insure the 100% achievement of quality target by controlling it during fabrication.
3. Final inspection.
This inspection consists of following steps.
1. Check complete measurements(Final Inspection) as per standard(dimension sheet).
2. Carry out all Destructive Testing(Tensile,Impact,Hardness) when required.
3. Carry out all Non Destructive Testing(MPT or PT) when required.
4. Check the thickness of Paint with Micro thickness meter.
5. Carry out all other testing as per the requirement of the job.
Nature of Hand on Experience
I have been worked in Iqbal engineering company as a QA/AC Engineer with following responsibilities.
4. Inspection of Pre-Material.
Lead the Inspection of Pre-Material as follows.
5. Make an action Plan of target work given by Head of Quality Control regarding the Raw Material, In process and Final Inspection.
6. Ensure the work done according to action plan from the team of Quality Inspectors.
7. Checking & confirmation of Pre-Material's MTCs (Material test certificates.) & other Documentations. Tele them with the standard requirements (ASME,ASTM,EN,DIN,BS or Internal Standard etc) which ever is mentioned in ITP(Inspection and Test Plan).
8. Ensure the Visual, Dimensional, Destructive and Non-Destructive testing of Pre-Material as per Process Description/Procedure and Work Instructions and ITP(Inspection and Test Plan).
9. Do the necessary Documentation(Make NCR or Release the Step in Production Papers).
10. Enter the availed data of material in the ERP System and release the Material for next Process.
5. In process inspection.
This inspection consists of following steps.
2. Checking the measurements of the job during different processes as and where mentioned in the working order to insure the 100% achievement of quality target by controlling it during fabrication.
6. Final inspection.
This inspection consists of following steps.
6. Ensure to inspect the complete measurements as per standard(dimension sheet).
7. Lead all Destructive Testing(Tensile,Impact,Hardness) when required..
8. Lead all Non Destructive Testing(MPT or PT) when required.
9. Check the thickness of chrome plating with thickness meter.
10. Lead all other testing as per the requirement of the job.
11. Ensure that only the good Quality Products should be released.
7. Clearance of Customer’s inspection.
This inspection consists of following steps.
In this stage we make sure to clear the TPI or quality inspection from our customer’s inspection Team.
8. Calibration.
Make a list of all testing machines & measuring equipments.
Make a calibration plan.
Arrange for the external calibration of the equipments in time.
Perform internal Calibration.
Update the calibration records.
9. Control of Documents.
Make sure the proper handling of Controlled, Uncontrolled & other types of Documents as per standard procedures.
Maintain the List of controlled documents(Withdrawal & valid documents)
Maintain the Document Issue - Distribution List.
Ensure that the latest revisions of the Documents should be available to the receivers of these documents and withdraw the old revisions.
Maintain the Master List of Documents and also the Master copies of all the Documents.
Raise the NCRs when necessary.
Nature of Hand on Experience
I am working in Erne Fittings Middle East,Saudi Arabia From Jan,2011 to still as a Head of Quality Control and Quality Planning with the following Role & Responsibilities.
1. Manage the Quality Department.
2. Continually improve Quality Management System.
3. Management Representative according to ISO 9001.
4. Perform internal audits.
5. Handle third party and customer certifications/approvals/audits.
6. Works inspector according to EN 10204 and AD 2000 W0.
7. Handle customers inspections.
8. Supervise final inspection, destructive testing and nondestructive inspection.
9. Manage calibration of measurement equipment.
10. Supervise handling of nonconformities.
11. Quality planning (establish ITPs) based on standards and customer specifications.
12. Provide training regarding quality management, standards, product quality and measurement & inspection.
13. Handle customer complaints.
Accomplishments
1. Successfully accomplished various customer complaints regarding quality of the product.
2. Removed many critical and complicated defects in a very short time
Responsibilities.
1 To improve the quality of the product as per standards.
2 To manage all the manpower and resources in order to achieve the quality.
3 To answer and solve the customer complaints regarding quality of product.
4 To set all the parameters according to customers satisfaction.
5 To arrange the weekly/monthly quality review meeting.
6 To find out the root cause of defects and also give the remedies in order to minimize the problems.
7 To get implementation on the remedies.
Trade Training :
I have got 6 months training (metallurgy, metal work) from Pakistan Institute of technology as a representative of my company & feel honor to say I stood first in my badge and got an aggregate marks of 87.62%.
During this training I have studied the following topics.
1. Characteristics of different metals.
2. Iron & its alloys. (Characteristics & Composition)
3. Aluminum & its alloys.
4. Titanium, lead.
5. Different type of steel (Nickel steel, Invar steel, etc)
6. Composite material.
7. Different heat treatment operations (Hardening, tempering, annealing, etc)
8. The behavior of metals on different temperatures (Recalsence, Decalescence)
9. Metallic temperatures (Melting point, Critical points, Critical temperature, Eutectic temperature, Boiling point)
And many more which I can’t write.
The Sporting Life
Professional Attitude :
1. With optimistic mindset, Committed to professionalism.
2. I have a deep knowledge about ISO,ASME,ASTM,ASNT,BS,EN,DIN,SNT and some other international standards.
3. Loyal to work and can work for extended hours.
4. Highly organized, Can work under strict deadline schedules.
5. Have excellent written and verbal English communication skills.
Interests and Activities
1. Very deep intrest in getting islamic knowledge(Reading Holy Quran,Ahadees and islamic books specially written by Aala Hazrat, Ameer e Ahle sunnat and Maktaba tul Madinah).
2. I am interest in study, although my important subject is math and drawing because math and drawing is base of engineering
3. I am also interested in Public Speaking and Debating, having represented my school at both disciplines.
4. Uses Internet and consults Books for being updated with new events about my professional and general concerns.
Personality and Character
1. I am a sophisticated person, not very calm and not very talkative.
2. In my casual life I am a very simple person & cooperative.
3. I love sports & exercise beside studies but due to my business I give congested time to sports and game
Skills and Qualities
My academic career, work experience and extracurricular activities have helped me to develop a number of skills, such as :
1. Good business English.
2. Good knowledge in Computer systems including EPR-Systems.
3. Good meeting skills.
4. Good time management.
5. Experience in managing others
6. An ability to perform under pressure
7. An ability to research and collate complicated information.
8. An ability to communicate effectively with anyone and deal with other people’s problems.
9. Confidence at public speaking and a willingness to take on responsibility.

[Guest]

RESUME
Bilal Ahmad
Email Address : arshitawheed AT gmail.com

Total experience :- more than 7years.
Career Objective :
- Seeking a position that will allow me to make significant contributions leading to company profitability and personal career growth.
- To work ,learn and grow with an organization, to reach a high level in hierarchy in an organization and be instrumental in driving it beyond its mission by adhering to its values and cultures and utilizing my potentional and talents to its fullest.
Synopsis
- I am an individual with positive mind set, goal orientation and ability to work at extreme ends of organization.
- Work with a sense of owner ship and dedicatedly giving maximum efforts to deliver extra and accomplish tasks/achieve goals of the organization.
- Excellent written communication, interpersonnel&problem solving skills with the ability to work in multi cultural environment.
- Skilled communication and quick learner with an analytical bent of mind coupled with with zeal to utilize and enhance ideas knowledge of skills.
- Exceptionally well organized with track record that demonstrates self motivation ,creatively and initiative to achieve both personnel and corporate goals.
- Multi faceted personality passion for sports, acting and event management
- News Paper Reading, interacting with people, listening music, cooking and travelling.
Availability : ASAP
Preferred place : Gulf and anywhere in world
Skills :
- Good communication and writing skills.
- Time management and leadership ability.
- Effective coordination and cooperation.
- Proficient with computer skills such as Microsoft Office, Microsoft Word Excel.
- Very good ability to gather report and take action on proper market information and trends.
- Auto cad knowing
Working experience :
Ircon International Limited
Job title : Supervisor (Civil)
Project : New B.G, J & K Rail Line Project
Duration : June, 2004 to June, 2008
Roles :
- Supervising the site measurements, progressing bill payments, quantity surveying of monthly contractor invoices.
- Control of contractors activities like earthwork, embankments, bridges and buildings involving various aspects such as site alignment survey etc.
- Handling all contractual as well as financial matters with contractors.
- Dealing with general administration issues with local civil authorities for land acquisition, forest clearance, supervision of tunneling T80, Asia’s biggest tunnel at Banihal - South portal.
- Lay out of earthen embankment of railway track, its construction and its necessary tests
ACE ENGINEERING COMPANY
Job title : Site Engineer (Civil)
Project : OTM Field Coy (Military Engineering Service)
Project cost :- 200 crore Indian rupees
Duration : June, 2008 to June, 2010
Roles :
- Providing technical guidance to contractors and sub-contractors on cost control and resourcing decisions.
- Monitoring of work execution and certification thereof.
- Lay out of multistoried buildings, military hospitals, guest houses, residential quarters, ,etc their quantity analysis and execution
- Ensuring technical adherence during bridge work and building work and timely completion thereof.
- Certification of billing of monthly output.
- Cost- Estimate analysis in capital asset work.
ROLES IN QUALITY CONTROL MANAGEMENT
- Concrete cube test of 7days and 28 days(for finding the compressive strength (fck)of concrete of respective grades)
- Slump test (for finding the workability of concrete)
- Slit test(for finding the percentage of slit in fine aggregate)
- Sieve analysis of coarse aggregate(20mm&10mm) &fine aggregate(below 4.75mm) and their gradation chart as per IS 383
- Abrasion test
- Specific gravity of coarse aggregate &fine aggregate
- Field density of soil(compaction test)by
1, core cutter method(Rapid moisture method)
2, Sand replacement method
- Brick test(for finding the compressive strength )
- Efflorescence test(presence of white precipitation on the surface of bricks)
- Water absorption test
IRCON INTERNATIONAL LTD (GOVT. OF INDIA UNDERTAKING)
Job title; works engineer
Project’ USB rail line project J&K
Project cost :-19000 crore Indian rupees
Duration : January 2011-till service
ROLES :-
- Supervising the site measurements, progressing bill payments, quantity surveying of monthly contractor invoices
- Dealing with general administration issues with local civil authorities for land acquisition, forest clearance
a) Lay out of multistoried buildings,
b) guest houses,
c) residential quarters,
d) railway station buildings,
e) railway plate forms,
f) foot over bridges(FOB)
g) minor bridges,etc their supervision, quantity analysis and execution
- Supervising the tunnels in execution of T 80 biggest railway line(BANIHAL J&K) in Indian railway .looking after cut and cover tunnels & their monthly invoices
- Supervising various operations undergoing of underground tunnel.(T-80) in this tunnel -80 involve latest method of tunneling like NEW Austrian tunneling method ( NATM) This tunnel -80 is divided into 3 to 4 segments for fast and remedial execution sometime called audit tunnel and escape tunnels
- The excavation of tunnel is carried out with common mining methods and equipments
- so for as the geology of tunnel -80 is concerned 8 type of rocks have been found class 1 to class 8
- Excavation is carried by 1st in heading and then benching in some parts and fully in some other parts depending up on the classification of rocks
- Following are execution and operation of tunnel – 80 is as under
1. Drilling of the face of tunnel by robot ARM of drilling machine.
Depth of drilling hole depends upon the type of rock and RESS.
2. Charging of drilling hole ( normally waterproof explosive material GELLATINE )is used
3. Blasting
a) Defuming
b) Mucking
c) Chipping the un-even surface
d) Fixing of triangular lattice girder
e) Wire mesh fixing followed by another wire mesh as per RESS
f) Rock bolting length of rock bolt depends upon the class of rock
g) Fore poling and swellex inserted at the crown of heading with dia of 32mm
4. Shortcreting M25(inner lining)250mm thickness
5. Final lining M30 (final lining) 300 thickness.
- NATAM involves careful sequencing of the execution and drainage(inside tunnel) as well as installation of supports
- Ensuring technical adherence during bridge work and building work and timely completion thereof.
Education :
Bachelor's Degree in Science (B.Sc) Kashmir University
Technical Education :
Diploma in Civil Engineering J & K BOTE
Projects :
- Study and construction of Railway Line in Awantipora Yard J&K.
- Study and construction of concrete road strip at Sonamarg J&K.

Declaration :
I hereby declare that all the details furnished above are true to the best of my knowledge and belief.
Place : ___________________
Date : ___________________
BILAL AHMAD