NBPPL Recruitment 2012 NTPC BHEL Power Projects Private Limited www.nbppl.in : Engineer/ Executive, Manager

[muthukalee]

Name of the organisation : NTPC BHEL Power Projects Private Limited (nbppl.in)
Name of the post : Recruitment for Engineer/ Executive, Manager in 2012
Reference Number : Ref No: REG/NBPPL/2012/03

NBPPL Needs Experienced Engineering, HR and Finance Professionals

Advertisement : http://www.nbppl.in/uploads/career_f.../det-adv-e.pdf
Apply online : http://nbppl.shine.com/
NBPPL Current Opening Page : http://www.nbppl.in/recent-opening

To take up the challenges before the company, NBPPL is looking for dedicated, experienced and self driven executives having relevant experience in the following functions – “Power Project Engineering, Project Management, Capital Planning & Coordination, Planning & Development, Quality Assurance, Material Management, Investment & Coordination, Marketing, Information Technology, Site Operations, Human Resource and Finance.

Post No. of Vacancies
Engineer/ Executive 17 30 Years
Sr.Engineer/ Executive 14 33 Years
Dy.Manager 15 36 Years
Manager 25 39 Years
Sr.Manager 19 43 Years
Dy.General Manager 10 46 Years
Additional General Manager 7 50 Years
Total : 107

Upper Age Limit :
Engineer/ Executive 30 Years
Sr.Engineer/ Executive 33 Years
Dy.Manager 36 Years
Manager 39 Years
Sr.Manager 43 Years
Dy.General Manager 46 Years
Additional General Manager 50 Years

Qualification :
Full time Bachelor's Degree in Engineering/ Technology from a recognized Indian University/ Institute approved by AICTE with not less than 60% marks in aggregate for UN-reserved/ OBC and 50% for SC/ST candidates.

HOW TO APPLY :
The application is to be applied on line; relevant link of the same is available at our website www.nbppl.in.

The on-line submission of application will be accepted only on filling up of all relevant information for applicable category.

On submission, the system would generate an acknowledgement slip, the same is to be sent along with documents (i.e. self attested copies of mark sheet, Professional Degrees, Proof of date of birth, documents certifying the experience, NOC etc.) by speed post / Courier to
The Recruitment Cell, HR Department,
NBPPL,
”The Corenthum”,
6th Floor, Tower-B, A-41, Sector-62,
Noida-201301(U.P).
Candidates are advised to remain in readiness to produce the required documents as mentioned above in original in the event of being invited for the interview.

Important Dates :
Online Application submission would start from 02/05/2012 10:00 AM
Last Date of Online Application Submission 16/05/2012 6:00 PM
Last Date of Receipt of documents 23/05/2012 6:00 PM

For any queries related with recruitment please email us at info@nbppl.in

[Guest]

Hai i am ramesh and I have completed my B.Tech.

[Guest]

BIO-DATA
NAME SHYAMAL KUMAR DEY
E-mail skdey123 AT rediffmail.com / skdey123 AT hotmail.com
QUALIFICATION Bachelor of Mechanical Engineering, 1978 from RE College (NIT), Durgapur
SPECIALIZATION
- Construction Management, Industrial relation with various Client & Contractor for expediting the jobs , Detail Construction supervision, Project Management, Project Planning & Scheduling, Quality Control, Pre-commissioning and commissioning activities of Thermal Power Plants, Combine Cycle Power Plants, Cogeneration Plants, Refinery.
- Experience on liaison with various company to expedite the supply of Equipment, Pumps, Transformer, Boiler & Turbine, Electrical Cable, and various type of Instruments etc., Experience in Erection & Testing of Boiler, Turbine and Pumps, EOT Crane, BOP like DM Plant, Cooling Water system, Fire Fighting System etc. at various projects. Experience on fabrication and erection of various Dia. CS, SS, LTCS, AS, IBR & large Dia. Pipe like Flair and CW System. Preparation of WPS & PQR, as per system requirements, sequential control of quality.
EXPERIENCE
From Nov’2010 to till date with TATA CONSULTING ENGINEERS LTD.( Contract Service)
- As Mechanical Incharge posted at GSPC PIPAVAV POWER COMP. LTD.,Dst. Amreli, Gujarat
2X 350 MW Combine Cycle power project
Role : Construction Supervision and Field Quality Control on behave of GSPC PIPAVAV POWER COMP.
LTD
From June’09 to Oct.’2010 with LURGI INDIA PVT. LTD
- As Resident Construction Manager posted at IOCL, Haldia. West Bengal(Client : IOCL)responsible
for REVAMPING of CDU-II Unit within schedule time frame and with effective cost control
From May’07to May’09 with MUKAND ENGINEERS LTD
- As Resident Construction Manager posted at IOCL Naphtha Cracker Project , Panipat [ Client : Toyo Engg.] responsible for supervision of fabrication & erection of CS, LTCS, SS, IBR, U/G fire water piping & Flair System of various diameter within best possible time frame and with effective cost control.
From May’ 03 to April’07 with DESEIN PVT. LTD.
- As Chief Engineer for the following Thermal and Combine Cycle Power Projects responsible for supervision of erection & commissioning of Boiler and Boiler Structure, CHP, DM Plant, HP/LP piping, CW System, Fire Fighting system, CT, EOT Crane etc.
- 2 x 15 MW TPP of Indo Rama synthetic Ltd. , Butibori, Nagpur (Role :As Site Incharge)
- 30 MW CPP at Dalmiapuram , Tamil Nadu under Dalmia Cement (B) Ltd.( Role :As Site Incharge)
- 107 MW Combine Cycle Power Plant at Dhubaran, Gujarat under GSECL (Role :As Site Incharge)
SHYAMAL KUMAR DEY
From June’85 to April’03 with DEVELOPMENT CONSULTANT PVT. LTD.
- From July ’99 to March ’03 as Dy. Manager responsible for H.O. based Project Management Service
- From April ‘97 to June ’99 as Dy Manager/Asst. Construction Manager at 655 MW Combine Cycle Power Plant of GTEC, Baruch, Gujarat. Responsible for execution of HP & LP Steam Piping, Natural gas & Liquid Fuel Piping ,DM water piping, UG CW piping, UG fire water Ring Main system, preparation of FQP etc.
- From August ’92 to March’97 as Asst .Manager/ Sr. Cons. Engineer at 2 x 235 MW Nuclear Power Project of RAPP 3 & 4 at Kota , Rajasthan of Nuclear Power Corporation. Responsible for field engineering, Construction Supervision of Secondary Cycle system piping , QC, witness of Test, Review of NDT result as per NPC specification , erection of LP/HP Steam Heaters etc.
- From 1990 to 1992 as Sr. Cons. Engineer at 1 x 67 .5 MW CPP of Indian Aluminum Co. Ltd. Hirakund Project in Orissa responsible for construction supervision of U/G fire fighting system , erection of Dearater Storage Tank , erection of Boiler Structure , witness of NDT Test, construction supervision of AC-Ventilation system, DM water etc.
- From 1988 to 1990 as Sr. Cons. Engineer /Construction Engineer at 3 x 60 MW TG and 6 x 39 T/Hr. Boiler of Vizag Steel Plant responsible for construction supervision of AC & Ventilation system, piping work related to Cooling Water, DM Water & Fire Fighting System.
- From 1985 to 1988 as Construction Engineer at 5 x 120 MW CPP of Nalco, Angul in Orissa , responsible for supervision of erection of DM Water Storage Tanks , LDO Storage Tanks, witness of hydro test of Tanks and various Dia. Pipe lines, U/G 2500 mm dia. 10 Km. long water conveying system.
From 1982 to 1985 with BHARAT BRAKES & VALVES LTD.
- As Project Engineer responsible for execution of F.O. Handling & Storage system piping & Storage Tanks in various thermal Power Plant. Preparation of WPS & PQR as per ASME SEC. IX. Preparation of Field Quality Plan etc.
From 1978 to 1982 with STEWARTS & LLOYDS INDIA LTD.
- AS Erection Engineer at Mathura Refinery and New Bangaigaon Refinery Projects. Responsible for fabrication & erection of various diameters CS, SS, AS (p -11/12/21/22) pipes, Preparation of WPS, PQR as per SEC. IX etc.
Worked with the following organizations for various Power plants & Refinary in India
1) Indo Rama synthetic Ltd.
2) Dalmia Cement (B) Ltd.
3) Gujarat State Electricity Corporation Ltd
4) IPNC Project, IOCL Refinery, Panipat
5) DESEIN PVT . LTD
6) DEVELOPMENT CONSULTANT PVT. LTD
Signature : SHYAMAL KUMAR DEY

[Guest]

APOORVA JAIN
E-mail :-apoorvajain.79 AT gmail.com
CAREER OBJECTIVE
To work in a dynamic and growth-stimulating environment which provides ample opportunities to utilize and enhance my skills and by reaching the level of self satisfaction along with the contribution for the development of organization.
EDUCATIONAL QUALIFICATIONS
1 Bechelor of Engineering (B.E) from NRI Institute of Technology and Management under Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal University with 2012 passout.
2 XII M.P BOARD from KIDDY’S CORNER .SCHOOL,GWALIOR
PERCENTAGES OF XII -72
3 X M.P BOARD from KIDDY’S CORNER SCHOOL, GWALIOR
PERCENTAGES OF X -74
4 BRANCH –ELECTRONICS & INSTRUMENTATION
5 B.E. AGGREGATE IS 71.2

PERSONAL SKILLS
Comprehensive problem solving abilities, ability to quickly adapt to new technologies.

INDUSTRIAL TRANING
Done from UFLUX COMPANY.LTD
To study different types of instruments.
PROJECT DETAILS
- Minor project I have done on
FAN SPEED CONTROLLER (BY CLAP)
- Major project I have done on
CELLPHONE OPERATED LAND ROVER
CO CURRICULAR ACTIVITIES
- Participated in a number of competitions at school levels.
LEISURE ACTIVITIES
Listening music, Badminton
I hereby declare that the information mentioned above is true on my own behalf.
Date :
Place : Gwalior APOORVA JAIN

[Guest]

Hi i have completed Diploma in Computer science and Engineering with 81%. Please inform if any government jobs are available.

[Guest]

Sir hello, is there any scope of job for me, I will coplete 44 in october 2012
WELDER AUTOMOBILE
Jaspal Singh
jaspal0707 AT yahoo.co.in
Profile
- Over 14years of experience in assembly and manufacturing – Electro- Mechanical and sheet metal components & 7 years experience in foundation, installation, pipe line layout ( copper & mild steel pipes ) & servicing of industrial compressors.
Personal Skills
- Progressive leader with strong team building skills and ability to meet deadlines
- Ability to plan, manage time and other resources with special emphasis on prioritisation and setting of goals
- Solid interpersonal and communications skills
- Self-motivated, well-organised, committed, reliable and ability to multitask
Technical Skills
- Proficient in operating/Set up/Trouble Shooting of Metal Inert Gas Welding, TIG, Spot Welding, GasWelding , Brazing and Special purpose Forming Machines, NC Bending M/c, and Stampings.
- Well versed with working on Jigs and Fixtures, producing Frames, Fuel Tanks, Mufflers, Exhaust Pipe and doing repair work
- Troubleshoot process/quality issues and implemented corrective actions effectively
- Efficiently co-ordinated and worked on mechanical/Electrical assembly operations and on equipments based on pneumatic and hydraulic circuits, read schematic drawings/blue prints
- Well versed in modern concepts and approaches including TPM/Kaizens, MRP and JIT.
Professional Experience

Operations and Maintenance
- Conducted inspections of inline and final product as per quality control process check sheet to comply with quality standards using tools as SPC Charts, inspection jigs, plug gauges and callipers
Jaspal Singh jaspal0707 AT yahoo.co.in +91-9871615616
5/191 Subhash Nagar New Delhi, India 110027
- Assisted in daily troubleshooting of daily operational/technical manufacturing issues
- Reduced rejection
Team Leader
- Established methods to meet work schedules and co-ordinated work activities with other departments/areas
- Resolved complaints and recommended countermeasures to improve productivity and quality
- Maintained a motivated workforce striving for continuous improvement in production, health
and safety and quality
- Participated in training of production operators
Education and Training

- Grade 12th
- One year Diploma in Welding from Industrial Training Institute
- One Year Training
- IELTS ( overall 6 bands ) more than 5.5 in each.
Work history
2004~ present Welder/ S D Pneumatics Services Pvt Ltd
1990~ Jan 2004 Welder/team leader Yamaha Motor Ltd. India
1989~1990 Trainee Welder Yamaha Motor Ltd. India