www.wogeinfo.com Woge Info Engineering Pvt Ltd Italy : EPC Piping PDMS Designer

[Admin]

Woge Info Engineering Pvt Ltd.
http://www.wogeinfo.com

Keywords: PDMS, Piping

Designation: PDMS Designer
Experience: 4 - 7 Years
Location: Italy
Education: UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Site Engg., Project Management
Posted Date: 24 Sep 2008

Job Description
very good exp. of PDMS (Piping)
candidates from EPC sector with having exp. of Oil, Gas, Refinery Projects

Desired Candidate Profile
very good exp. of PDMS (piping
candidates from EPC sector with having exp. of Oil, Gas, Refinery Projects

Please send your resume in word formate

Company Profile
WOGE Info Engineering Pvt.Ltd. specializes in IT, ITES, Engineering Consultancy and Project Development in the Petrochemicals, Oil & Gas and Energy sector. We are an engineering consulting firm offering services to multinational companies.

Together with our team of experts, we participate in the realization of complete Projects or, in case of large Projects, in the realization of parts of the Project integrating our staff with other members of the Project.

Technologies and Projects in which we mainly operate in are: Refineries, Pipelines, Oil & Gas treatment plants; Petrochemicals; Power generation and distribution; Utilities. And this applies to all phases: design, engineering, maintenance and technical or economical feasibility studies.

Address:
Not Mentioned

Email Address:
career@wogeinfo.com

Telephone:
Not Mentioned

Reference ID:
490

[Hitesh Suchak]

RESUME

HITESH N. SUCHAK
U-8/32, Second Floor, DLF Phase-III, Gurgoan, Haryana 122002
Phone no: 09999633575, Email - hiteshsuchak AT yahoo.com


OBJECTIVE:
To work with the progressive organization where I would get an opportunity to provide my service and have value addition to my knowledge by working with senior professionals.
SUMMARY:

A Chemical Engineering graduate with 6+ years of total experience in Piping Design engineering, Planning and control in oil and gas Refinery, Petrochemical, Power and Chemical Project.
Presently working with SK E&C India Pvt. Ltd, Gurgoan as a Piping Engineer.

- SK E&C India Pvt. Ltd. Gurgoan - ( December 2009 – Onward )
- Fluor Daniel India Pvt. Ltd. Gurgoan - (April 2007 – November 2009)
- Rolta India Pvt. Ltd. Mumbai - (May 2005 – March 2007)
- NGL fine Chem. Ltd. Mumbai - (October 2003 – April 2005)

WORK EXPERIENCE:

Currently working with SK E&C India Pvt. Ltd. as Piping Engineer from December 2009

PROJECTS: CURRENTLY WORKING AS A PIPING ENGINEER FOR GATHERING STATION- 23 UNIT ON KOC’S ENHANCEMENT OF BOOSTER STATION -131 PROJECT DECEMBER 2009 ONWARD.
Contribution
- Preparation of study layout for gathering station compressor unit.
- Preparation of Equipment nozzle orientation.
- Stress and structural input preparation.
- Need list preparation and updation.

PROJECTS: ALSO WORKING ON NSRP’S PROPOSAL PROJECT FOR KHDS UNIT FEBRUARY 2011 ONWARD.

- Material take-off from P&ID.
- Preparation of study piping transposition.
- Preparation of material sketches.
- Preparation of ITB Summary.

II. ORGANIZATION – Fluor Daniel India Pvt. Ltd. Gurgaon as an Associate Design Engineer-II
Duration: - Apr 2007 – November 2009

PROJECTS: WORKED AS A PIPING AREA LEAD FOR VDU-2 UNIT ON TOTAL’S DCP PORT ARTHUR REFINERY FROM AUGUST 2008 – NOVEMBER 2009.
Contribution
- Leading a team for technical support and guidance about client standards.
- Reviewing and monitoring the modeling of piping and equipments.
- Coordination with various disciplines like structural, electrical, control system, project control and Prime office
- Handling piping package like Column, Exchangers, Pumps, Filter, Air coolers and unit rack. Equipment modeling for the same.
- Reviewing the vendor drawing and documents checking piping layout and inter discipline drawings/ documents.
- L&P and vessel clits drawing generation for vessel vendors.
- Steam tracing manifolds layout finalization and steam tracing for unit.
- Monitoring progress of work for the area keeping in view the quality aspects to meet the schedule of deliverables.
- Self checking and trouble shooting in isometric extraction.
- Supporting and managing activities like model updation per design change notice, model preparation for internal and client review, tag closure activity.


PROJECTS : CONOCOPHILLIPS WOOD RIVER REFINERY CORE PROJECT AS ISOMERIC CHECKER
FROM MAY 2008 – AUGUST 2008.
Contribution
- Isometric checking for OSBL rack and HCF unit from P&ID, line list, latest equipment drawing also for design, material and support consistency.
- Tie-in sketches verification against the existing plant LFM.
- Equipment L&P drawing checking.

PROJECTS : OAK GROVE POWER PROJECT WORKED AS DESIGNER FROM ¬¬APRIL 2007 – MAY 2008
Contribution
- Preparation of piping and equipment layout for unit incorporating process requirement vendor drawing
details.
- Handling Piping and Equipment modeling for Turbine Drain, Heater Drain and Lube oil system.
- Engineering co-ordination with disciplines like structural, electrical, control system and counter parts.
- Stress input, Stress sketch preparation and Incorporation.
- Preparation for internal & client reviews, review tags closure activity.
- Planning, Controlling and monitoring isometrics for systems.
- Interference resolution using Interclash software.
- Extraction of general arrangement drawing from Drawing Manager

International Assignment:
Visited Prime office at Greenville (SC), USA (Duration from Feb-2007 to Apr-2007) to facilitate design work to progress as per schedule and to assist counter parts in project close out activity.

Successful completion of Intermediate Piping and Isometric checker Training at Fluor Daniel India Pvt. Ltd.

III. ORGANIZATION – Rolta India Limited Mumbai as an Executive.
Duration: - June 2005 – March 2007
Projects: Rabigh Development Project Propylene Oxide Plant.
Contribution
- Piping modeling from General Arrangement Drawing (GAD) & P & ID
- Isometric generation and correction per client comments.
- RDB conflict report generation and resolution.
- Modeling for equipment such as air compressors, pumps and tanks.
- Schedule Review with client in the areas on SPR, clashes identification & removal of the same.
- Drawing generation for equipment nozzle orientation using drawing manager and orthogen.
- Input verification, co-ordination with clients & area work supervision.


Project: Essar Oil Limited
Contribution:
- Piping modeling and Extraction of Isometric Drawings from General arrangement drawings.
- Equipment modeling for pump, Exchangers, horizontal and vertical vessels per latest vendor drawing.
- Extraction of Isometric Drawings as per vendor drawings.
- Self checking and trouble shooting in isometric extraction.
III. ORGANIZATION: M/S NGL FINE- CHEM. LIMITED MUMBAI
Duration: - Oct-2003- May 2005
Responsibilities:
- Production planning, controlling and execution.
- Handling expansion and revamp for ISM HCL unit.
- Supervising day-to-day shop floor activities.
- Attending and troubleshooting in production, process and equipments.
- Training to workmen on time-to-time basis
- A close liaison with stores, Quality assurance and maintenance department.

ACADEMIC RECORDS :
Qualification:

I. B.E. (Chemical Engineering)

Institute: Bharati Vidyapeet College of Engg. Pune University.
Percentage: 66.13% (Distinction). Year of Passing: 2003
II. Diploma in Chemical Engineering.
Institute: Government Polytechnic Yavatmal Maharashtra, M.S. Board of Technical Education Mumbai.
Percentage: 70.83% Year of Passing: 2000.
III. Diploma in Piping Engineering.
Institute: Suvidhya Institute of technology Year of Passing: 2006.
SOFTWARE
SKILLS:


- PDS (Plant Design System)
- SPR (Smart Plant Review)
- SP3D
- Microstation (2D & 3D)
- Orthogen
- Pelicon Forge

PERSONAL
INFORMATION:

Permanent Address: Row House No.1048, First Floor, Sector No.5, Opp. to Koperkhairane station,
Koperkhairane, Navi Mumbai.400709.
Date of birth: 5th Jan 1979
Marital status: Married.
Languages known: English, Hindi, Marathi, Gujrati
Passport No: F-8599275

[Guest Poster]

RESUME

HITESH N. SUCHAK
U-34/35, First Floor, DLF Phase-III, Gurgoan, Haryana 122002
Phone no: 09999633565, Email – hiteshsuchak AT yahoo.com

OBJECTIVE:
To work with the progressive organization where I would get an opportunity to provide my service and have value addition to my knowledge by working with senior professionals.
SUMMARY:

A Chemical Engineering graduate with 6 years of total experience, presently working with Fluor Daniel India Pvt. Ltd, Gurgoan as Associate Design Engineer-II from April 2007

- Fluor Daniel India Pvt. Ltd. Gurgoan - (April 2007 – till date)
- Rolta India Pvt. Ltd. Mumbai - (May 2005 – March 2007)
- NGL fine Chem. Ltd. Mumbai - (October 2003 – April 2005)

WORK EXPERIENCE:
Currently working with Fluor Daniel India Pvt. Ltd. as Associate Design Engineer - II from April 2007

PROJECTS: CURRENTLY WORKING AS A PIPING AREA LEAD ENGINEER FOR VDU-2 UNIT ON TOTAL’S DEEP CONVERSION PROJECT PORT ARTHUR REFINERY FROM AUGUST 2008 ONWARD.
Contribution
- Leading a team for technical support and guidance about client standards.
- Reviewing and monitoring the modeling of piping and equipments.
- Coordination with various disciplines like structural, electrical, control system, project control and
- Handling piping package like Column, Exchangers, Pumps & seal pot, Filter, Air coolers and unit rack. Equipment modeling for the same.
- Reviewing the vendor drawing and documents checking piping layout and inter discipline drawings/documents.
- L&P and vessel clits drawing generation for vessel vendors.
- Steam tracing manifolds layout finalization and steam tracing for unit.
- Monitoring progress of work for the area keeping in view the quality aspects to meet the schedule of deliverables.
- Self checking and trouble shooting in isometric extraction.
- Supporting and managing activities like model updation per design change notice, model preparation for internal and client review, tag closure activity.
- Utility station and eye washer/safety shower piping designing,
- Preparation and updation of Pipeline status record (PLSR) and need list.


PROJECTS : CONOCOPHILLIPS WEED RIVER REFINERY CORE PROJECT AS ISOMERIC CHECKER
FROM MAY 2008 – AUGUST 2008.
Contribution
- Isometric checking for OSBL rack and HCF unit from P&ID, line list, latest equipment drawing also for design, material and support consistency.
- Tie-in sketches verification against the existing plant LFM.
- Equipment L&P drawing checking.

PROJECTS : OAK GROVE POWER PROJECT WORKED AS DESIGNER FROM ¬¬APRIL 2007 – MAY 2008
Contribution
- Preparation of piping and equipment layout for unit incorporating process requirement vendor drawing
details.
- Handling Piping and Equipment modeling for Turbine Drain, Heater Drain and Lube oil system.
- Engineering co-ordination with disciplines like structural, electrical, control system and counter parts.
- Stress input, Stress sketch preparation and Incorporation.
- Preparation for internal & client reviews, review tags closure activity.
- Planning, Controlling and monitoring isometrics for systems.
- Interference resolution using Interclash software.
- Extraction of general arrangement drawing from Drawing Manager

International Assignment:
Visited Prime office at Greenville (SC), USA (Duration from Feb-2007 to Apr-2007) to facilitate design work to progress as per schedule and to assist counter parts in project close out activity.

Successful completion of Intermediate Piping and Isometric checker Training at Fluor Daniel India Pvt. Ltd.

II. ORGANIZATION – Rolta India Limited Mumbai as an Executive.
Duration: - June 2005 – March 2007

Projects: Rabigh Development Project Propylene Oxide Plant.
Contribution
- Piping modeling from General Arrangement Drawing (GAD) & P & ID
- Isometric generation and correction per client comments.
- RDB conflict report generation and resolution.
- Modeling for equipment such as air compressors, pumps and tanks.
- Schedule Review with client in the areas on SPR, clashes identification & removal of the same.
- Drawing generation for equipment nozzle orientation using drawing manager and orthogen.
- Input verification, co-ordination with clients & area work supervision.

Project: Essar Oil Limited
Contribution:

- Piping modeling and Extraction of Isometric Drawings from General arrangement drawings.
- Equipment modeling for pump, Exchangers, horizontal and vertical vessels per latest vendor drawing.
- Extraction of Isometric Drawings as per vendor drawings.
III. ORGANIZATION: M/S NGL FINE- CHEM. LIMITED MUMBAI
Duration: - Oct-2003- May 2005
Responsibilities:
- Production planning, controlling and execution.
- Handling expansion and revamp for ISM HCL unit.
- Supervising day-to-day shop floor activities.
- Attending and troubleshooting problems with production, process and equipments.
- Training to workmen on time-to-time basis
- A close liaison with stores, Quality assurance and maintenance department


ACADEMIC RECORDS :
Qualification:

I. B.E. (Chemical Engineering)

Institute: Bharati Vidyapeet College of Engg. Pune
University: Pune University.
Year of Passing: 2003.
Percentage: 66.13% (Distinction).
II. Diploma in Chemical Engineering.
Institute: Government Polytechnic Yavatmal Maharastra.
Board: M.S. Board of Technical Education Mumbai.
Year of Passing: 2000.
Percentage: 70.83%
III. Diploma in Piping Engineering.
Institute: Suvidha Institute of technology
Year of Passing: 2006.
SOFTWARE
SKILLS:

- PDS (Plant Design System)
- SPR (Smart Plant Review)
- SP3D
- Microstation (2D & 3D)
- Orthogen
- Pelicon Forge
PERSONAL
INFORMATION:

Date of birth: 5th Jan 1979

Marital status: Married.

Languages known: English, Hindi, Marathi, Gujrati
Passport No: F-8599275



RESUME

HITESH N. SUCHAK
U-34/35, First Floor, DLF Phase-III, Gurgoan, Haryana 122002
Phone no: 09999633565, Email – hiteshsuchak AT yahoo.com


OBJECTIVE:
To work with the progressive organization where I would get an opportunity to provide my service and have value addition to my knowledge by working with senior professionals.
SUMMARY:

A Chemical Engineering graduate with 6 years of total experience, presently working with Fluor Daniel India Pvt. Ltd, Gurgoan as Associate Design Engineer-II from April 2007

- Fluor Daniel India Pvt. Ltd. Gurgoan - (April 2007 – till date)
- Rolta India Pvt. Ltd. Mumbai - (May 2005 – March 2007)
- NGL fine Chem. Ltd. Mumbai - (October 2003 – April 2005)

WORK EXPERIENCE:
Currently working with Fluor Daniel India Pvt. Ltd. as Associate Design Engineer - II from April 2007

PROJECTS: CURRENTLY WORKING AS A PIPING AREA LEAD ENGINEER FOR VDU-2 UNIT ON TOTAL’S DEEP CONVERSION PROJECT PORT ARTHUR REFINERY FROM AUGUST 2008 ONWARD.
Contribution
- Leading a team for technical support and guidance about client standards.
- Reviewing and monitoring the modeling of piping and equipments.
- Coordination with various disciplines like structural, electrical, control system, project control and
- Handling piping package like Column, Exchangers, Pumps & seal pot, Filter, Air coolers and unit rack. Equipment modeling for the same.
- Reviewing the vendor drawing and documents checking piping layout and inter discipline drawings/documents.
- L&P and vessel clits drawing generation for vessel vendors.
- Steam tracing manifolds layout finalization and steam tracing for unit.
- Monitoring progress of work for the area keeping in view the quality aspects to meet the schedule of deliverables.
- Self checking and trouble shooting in isometric extraction.
- Supporting and managing activities like model updation per design change notice, model preparation for internal and client review, tag closure activity.
- Utility station and eye washer/safety shower piping designing,
- Preparation and updation of Pipeline status record (PLSR) and need list.


PROJECTS : CONOCOPHILLIPS WEED RIVER REFINERY CORE PROJECT AS ISOMERIC CHECKER
FROM MAY 2008 – AUGUST 2008.
Contribution
- Isometric checking for OSBL rack and HCF unit from P&ID, line list, latest equipment drawing also for design, material and support consistency.
- Tie-in sketches verification against the existing plant LFM.
- Equipment L&P drawing checking.

PROJECTS : OAK GROVE POWER PROJECT WORKED AS DESIGNER FROM ¬¬APRIL 2007 – MAY 2008
Contribution
- Preparation of piping and equipment layout for unit incorporating process requirement vendor drawing
details.
- Handling Piping and Equipment modeling for Turbine Drain, Heater Drain and Lube oil system.
- Engineering co-ordination with disciplines like structural, electrical, control system and counter parts.
- Stress input, Stress sketch preparation and Incorporation.
- Preparation for internal & client reviews, review tags closure activity.
- Planning, Controlling and monitoring isometrics for systems.
- Interference resolution using Interclash software.
- Extraction of general arrangement drawing from Drawing Manager

International Assignment:
Visited Prime office at Greenville (SC), USA (Duration from Feb-2007 to Apr-2007) to facilitate design work to progress as per schedule and to assist counter parts in project close out activity.

Successful completion of Intermediate Piping and Isometric checker Training at Fluor Daniel India Pvt. Ltd.

II. ORGANIZATION – Rolta India Limited Mumbai as an Executive.
Duration: - June 2005 – March 2007

Projects: Rabigh Development Project Propylene Oxide Plant.
Contribution
- Piping modeling from General Arrangement Drawing (GAD) & P & ID
- Isometric generation and correction per client comments.
- RDB conflict report generation and resolution.
- Modeling for equipment such as air compressors, pumps and tanks.
- Schedule Review with client in the areas on SPR, clashes identification & removal of the same.
- Drawing generation for equipment nozzle orientation using drawing manager and orthogen.
- Input verification, co-ordination with clients & area work supervision.

Project: Essar Oil Limited
Contribution:

- Piping modeling and Extraction of Isometric Drawings from General arrangement drawings.
- Equipment modeling for pump, Exchangers, horizontal and vertical vessels per latest vendor drawing.
- Extraction of Isometric Drawings as per vendor drawings.
III. ORGANIZATION: M/S NGL FINE- CHEM. LIMITED MUMBAI
Duration: - Oct-2003- May 2005
Responsibilities:
- Production planning, controlling and execution.
- Handling expansion and revamp for ISM HCL unit.
- Supervising day-to-day shop floor activities.
- Attending and troubleshooting problems with production, process and equipments.
- Training to workmen on time-to-time basis
- A close liaison with stores, Quality assurance and maintenance department


ACADEMIC RECORDS :
Qualification:

I. B.E. (Chemical Engineering)

Institute: Bharati Vidyapeet College of Engg. Pune
University: Pune University.
Year of Passing: 2003.
Percentage: 66.13% (Distinction).
II. Diploma in Chemical Engineering.
Institute: Government Polytechnic Yavatmal Maharastra.
Board: M.S. Board of Technical Education Mumbai.
Year of Passing: 2000.
Percentage: 70.83%
III. Diploma in Piping Engineering.
Institute: Suvidha Institute of technology
Year of Passing: 2006.
SOFTWARE
SKILLS:

- PDS (Plant Design System)
- SPR (Smart Plant Review)
- SP3D
- Microstation (2D & 3D)
- Orthogen
- Pelicon Forge
PERSONAL
INFORMATION:

Date of birth: 5th Jan 1979

Marital status: Married.

Languages known: English, Hindi, Marathi, Gujrati
Passport No: F-8599275

[nuruddin86]

CURRICULUM VITAE
NURUDDIN AHMED SAYED
Address :-JAIHIND BUDHVIKAS CO.OP.HSG.SO, S.G BARVE
MARG,BLD NO: 2 ,2ND FLOOR ,FLAT , NO. 213,KURLA (E) MUMBAI 400024.
Emai l ID : - nuruddin86 AT gmail.com
Contact No: - 9773271553
Applied Post: PIPING DRAUGHTS MAN

Objective To utilize the latest expertise of Skills & Qualification for large size projects with Valued Engineering Drafting. To work in an environment, this is innovative challenging & rewarding.

Professional Experience Upto 4 Years of Experience in Drafting and Detailing Of Piping Drawing and other drawing in compliance with the international standard. Currently working in UHDE INDIA PVT.LTD, Mumbai as a Autoplant Designer/ modeler.

Work Environment
Organization : UHDE INDIA PVT.LTD, Mumbai.
Duration : September 2009 TO till date.
Designation : Piping Draughtsman.
: Working in AUTOPLANT.
Organization : CHEMTEX GLOBAL ENGINEERING, Mumbai.
Duration : June 2008 TO September 2009 .
Designation : Piping Draughtsman.
: Working in AUTOPLANT XM

Organization : UHDE INDIA PVT.LTD, Mumbai.
Duration : September 2006 TO june 2008.
Designation : Piping Draughtsman.
: Working in AUTOPLANT , AUTO CAD & ISOMET.
Assignments: -

Piping : Preparation of Equipment Layout Plan Views & Section View, Piping Layout Plan View & Section View, Preparation of Line List and Piping BOM from P & ID, Tank farm, piping Supports, Special Supports & Parts, Nozzle Orientation Drawings act.

Preparation of Piping & Instrumentation Diagrams. (Interconnecting & Utility Distribution.) Updating of Existing drawing of PDF format for plant modification Documentation & preparation of ISO sketch from piping layout. Miscellaneous : Preparation of Equipment Layouts along with sections for engineers Approval, incorporating the comments given by the concern Engineer Of Design Manager. Compilation Of standard details, as per the Project. Scope of Engineering.

Projects Handled and nature of work.
1-INDIAN PETROCHEMICAL LTD (CHLORINE PLANT)

2 - UTKAL (ALUMINA PLANT)

3-JINDAL SOUTHWEST.INDIA (AIR SEPRATION PLANT)

4-MEISHAN (NANJING) CO. LTD CHAINA (AIR SEPRATION PLANT)

Academ Qualified to SECONDARY SCHOOL CERTIFICATE (S.S.C.) with 57%, conducted By Maharashtra State Board.

Professional Qualified to DRAUGHTSMAN MECHANICAL with 71%, conducted by NATIONAL TRADE CERTIFICATE, GOVERNMENT OF INDIA, from HABIB TECH INSTITUTE.
Qualified to AUTOCAD with 1st Class, conducted by HABIB TECH INSTITUTE.

Applications : Ms Word , Ms DOS & Ms PowerPoint.
Database : Ms Excel.
Engineering : PDS,PDMS,AUTOPLANT XM, AUTOCAD 2000, 2000i,2004,2006,2D&3D, UIL Pipe
& Isometric.
Father’s Name : Mohammed Issa
Date of Birth : 29th Jan, 1986.
Sex : Male
Marital Status : Single
Place of Birth : Mumbai
Nationality : Indian
Languages Known : English, Hindi, Marathi & Urdu.

Passport Facts
Passport No : GO567955
Place of Issue : Thane
Date of Expire : 05/11/2016

I, hereby declare that the above information furnished by me is true to the best of my knowledge.
Thanking you,

Place : Mumbai
Date : / /2010 Yours faithfully,
(SAYED NURUDDIN)