SoundLines Saudi Arabia : MECHANICAL SUPERVISOR

[Admin]

SoundLines Inc
http://www.soundlinesgroup.com

Keywords: MECHANICAL SUPERVISOR

Designation: MECHANICAL SUPERVISOR
Experience: 5 - 10 Years
Location: Saudi Arabia
Education: UG - Diploma - Civil
PG - Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Site Engg., Project Management
Posted Date: 26 Sep 2008

Job Description
Minimum 05 years experience in Oil & Gas industry

Desired Candidate Profile
Candidates should be Diploma in Civil Engineering with minimum 5 years experience in Oil & Gas industry

Company Profile
A Leading OIL & GAS Industry

Executive Name: Miss Anisha

Address:
SoundLines Inc
4/58 Kamal Mansion
Haji Niyaz Ahmed Azmi Marg
Colaba
Mumbai,Maharashtra,INDIA 400005

Email Address: sisco@soundlinesgroup.com

Telephone: 91-22-22813283

[Guest]

Dear

sir
I have experience in this field past 15 years in all arround meddile east as
a mechanical supervisor.
still i am working in doha qatar at this post. I see vacancy on net from your
organization. Then applied for these post.


thanks
khan mohammed ekhlaque
mechanical supervisor.

[Guest]

AFSAL.Y
E-mail :afsalyunus AT gmail.com

An enthusiastic MECHANICAL ENGINEERING professional (B.Tech) aspiring to establish a career in a growth oriented organization to utilize acquired skills and knowledge in achieving organizational goals, while attaining personal and professional growth; provide an opportunity for enhancing learning graph and career advancement
EDUCATIONAL QUALIFICATION
Bachelor of Technology (B. Tech) in Mechanical Engineering with 67% from TKM College of Engineering, University of Kerala in 2010
Higher Secondary Examination with 61%(CBSE) mark from ANSAR ENGLISH SCHOOL, PERUMPILAVU, KERALA in 2006.
Secondary School Examination with 78% mark from S.V.P.M.H.S., Kerala Board in 2004.
SPECIALIZATION
- Post graduate program in Engineering& Management for Oil & Gas Industry , Zabeel institute of Management and Technology
- Advanced Diploma for Oil & Gas Industry by Academic College of London, United Kingdom
- Construction Drawings such as P&ID, Piping Isometrics, Equipment, Structural, GAD
COMPUTER/ LANGUAGE/TECHNICAL SKILLS
Knowledge in
- I-DEAS-8 - AUTOCAD 2009
- MS Office - C++
- Labview - Primavera
- PDMS - CAESAR II
ACADEMIC PROJECTS & ELECTIVES
Project :
Exhaust fired air conditioning in Automobiles- using adsorption system
Seminar :
CRAYO-CAR
SUBJECT OF INTEREST
- Piping engineering
- Industrial quality control
- Automobile Engineering
- Heat and mass transfer
- Fluid dynamics
INDUSTRIAL VISIT
- Kerala Automobiles Limited, Neyyattinkara
- FACT, Cochin
- Cochin Shipyard
- United Electricals Limited, Kundara
- KMML, Chavara
INDUSTRIAL EXPERIENCE
- Currently working as SITE IN CHARGE at BAVA ENGINEERS PVT. LTD. for the last one year.
- I have attended one month training in a central government firm, Fluid Control Research Institute.
- Training Contents
- Selection and Application of Flow meters : Performance, QR Evaluation, and Calibration
- Instrumentation for flow measurement and auxiliary measurement systems
- Study of International Standards – AGA, API, OIML, etc for Oil and Gas Flow measurement
computation and custody transfer
- Data Acquisition Systems and Flow Computers, Custody Transfer Flow Measurement
- Auditing and Validation of Flow metering stations and custody transfer installations
- Model Approval of Flow meters as per OIML International Standards
- Flow Control Techniques – Control Valves and Actuators, Quality and Traceability
RESPOSIBLITIES.
- Fabrication and erection of miter bends and pipes(3m dia.)
- Construction major, minor pile foundations for housing/industrial projects.
- Site supervision piling construction works and different type of piles for foundations of elevated metro structures
- Management & Maintenance of Hydraulic Rotary Piling Rig, to get maximum uptime on sites.
- Trouble shooting of site issues for smooth operations.
- Ensuring Safety, environment Legislation & HSE compliances are met.
- Reviewing progress of project, Delay analysis & its remedial plan along with the resources required.
- Interact & co-ordinate with client & consultant
- Ensure quality work & get it approved from client & consultant.
STRENGTHS
- Adaptability - Hard working
- Team worker - Good time manager
- Ability to handle stress

[Guest]

ABOOTHAHIR. C KADER
Email :tharoos AT gmail.com

CAD ENGINEER – MECHANICAL
(PLUMBING, FIRE FIGHTING & HVAC)
Highly talented Mechanical CAD engineer with great deal of experience in preparing technical drawings of extraordinary excellence, Remarkable experience in preparing Plumping, Fire fighting & HVAC Drawings for commercial, retail, and residential projects
KNOWLWDGE, SKILLS AND ABLITIES
- Solid knowledge in AutoCAD is the key strength.
- Design clear, complete and accurate working plans and detail drawings from rough or detailed sketches or notes by performing the different types of duties.
- Evaluate final sketch of proposed drawing, measuring dimension of parts, materials to be used, relation of one part to another, and relation of various parts to whole structure or project using engineering skills.
- To supervise all sub-ordinates, held meetings to solve the problems relating work.
- Presents samples to supervisors, clients and others for selection and approval.
- Consults with supervisors and others to evaluate individual project needs.
- Discuss changes in design, methods of manufacture and assembly, and drafting techniques and procedures with staff and coordinate correction.
- Works closely with Project Management team to meet customer's needs. Led sketches or notes by performing the different types of duties.
PROFESSIONAL EXPERIENCE
I have more than 7 years UAE experience in design field, my detail of work experience is below :-
- With Allmac Electro Mechanical LLC, U.A.E. (Seasif Group) since January 2006 as a
MECHANICALCAD ENGINEER.
- Donna Towers (2B+G+3P+30 floored twin towers) Commercial & Residential Building at Dubai Silicon Oasis.
- Canada Business Center –Tower-1(3B+G+3P+15) Floored Office building at business bay, Dubai.
- Jumeirah Village (B+G+4Typical+Roof Floor) Residential Building at Emirates Garden-2, Dubai.
- The Villa, 224 (G+1) Villas for Dubai Properties at Al Ruwayya, Dubai.
- Al Khan Tower (G+3P+13+Ph+H.C) Residential Building at Sharjah.
- With Abdul Rahim Engineering Consultants (ARECO) Dubai, U.A.E. From December 2002 to August 2005 as an ASSISTAND ENGINEER.
- G+7Parking+28Floored Residential Tower at Al Nahada, Sharjah, U.A.E.
- 2B+G+6 Floored Commercial & residential Building at Al Barsha, Dubai, U.A.E.
- G+8 Floored Commercial & residential Building at Al Nad Al Shiba, Dubai, U.A.E.
- B+G+4+Gym Hotel at Al Muraqqabat, Dubai, U.A.E.
- B+G+1 Al Zarooni Villa, Dubai, U.A.E.
- G+1 Villa at Emirates Hill, Dubai, U.A.E.
- G+M Muteena Shed, Dubai, U.A.E.
FIELD OF RESPONSIBILITIES :
- Responsible for analyzing the layout of drainage piping with respect to the slope, location of fixtures pipe to be used and the actual location of stub-out.
- Responsible for making water supply layout including with water meter & pump room rooms details for DEWA submission.
- Responsible for the distribution of the sizes of pipelines of every unit.
- Setting up of standard, this will be used for the entire job, if they didn’t provide any delegating of detailing works to subordinates for faster and more accurate completion.
- Preparation of shop drawing for Air-conditioning system.
- Preparation of shop detail such as Exhaust Fan mounting detail, Fan coil unit, Ahu’s, etc.
- Estimate all the materials and equipment such as ductworks, piping, etc.
- Estimate all the materials and equipment such as ductworks, piping, etc.
- Evaluate site condition in installation of ductworks and piping.
- Preparation of sectional drawing that to be used at site information.
- Preparation of back-up files every end of the month.
- Preparation of Shaft Co-ordination for MEP Services
- Preparation of Builders Work Layout for MEP Services
- Preparation of Schematic Diagram for mechanical services
- Preparation of MEP as Built Drawings.
ACADEMIC, TECHNICAL QULIFICATION & COMPUTER QULIFICATION
3 Year Diploma in Mechanical Engineering from Board of Technical Education, Government of Kerala, India.
12Th Standard/Higher Secondary (Central Board of Secondary Education)
10Th Standard/S.S.L.C (Central Board of Secondary Education)
Auto Cad (Level I, II, III) Cad Center (Authorized Autodesk Center) Cochin, India
3D-Studio Max Cad Center (Authorized Autodesk Center) Cochin, India
Microstaion Wizard Computers, Kerala, India
Design software’s CATIA & UNIGRAPHIC NX.
C.N.C Programming and Operation (Lathe and Milling Machine)
Microsoft Office (Standard & Professional) and various Microsoft products, (Photoshop, Illustrator etc)

[Guest]

W. MOHAMED SILAR
Professional Summary;
A position with an international organization providing the opportunity to contribute fully by utilizing to the full extent my professional experience, training, & capabilities in Construction Project Team. In addition, to apply the various technical, management and leadership qualities acquired during my career.
Education
Bachelor of Engineering in Mechanical from finest University in India.
Bharathiar University, Coimbatore, India.
ADITIONALQUALIFICATION;
Certificate Course AutoCAD (Drafting, Mechanical Structure)
Certificate Course in CNC Machining Cam. Programming (Govt. Recognized)
Certificate Course in Personal Safety and Social Responsibilities
Certificate Course in Internal Auditing Of Quality System.
Certificate Course In Fire Prevention And Fire Fighting.
N.D.T.Certificate Course Mpt Asnt Level-II
Computer operating Knowledge in MS word, MS excel.
Certificate Course In Dry-Docks World in Dubai Safety Induction Course.
LANGUAGES Known; English, Hindi, Urdu, Tamil, Malayalam& Telugu.
Employment History;
1) COMPANY : Arcelor Mittal- Al-jubail, Saudi Arabia
DESIGNATION : Mechanical supervisor (construction dept.)
Emp.No : C7609
PLACE : SAUDI ARABIA
DURATION : Dec-2011 TO Till Date
2) COMPANY : SPEETECH- Al-jubail self project at SABIC COMPANIES.
DESIGNATION : SITE ENGINEER
PLACE : SAUDI ARABIA
DURATION : JUN-2011 TO DEC-2011
3) COMPANY : BONATTI-Abu Ali, KSA.
DESIGNATION : PIPING SUPERVISOR
PLACE : SAUDI ARABIA
DURATION : MARCH-2011 TO MAY-2011
4) COMPANY : Rarefied Engineers Pvt Ltd L.L.C
DESIGNATION : Mechanical Engineer
PLACE : Chennai. Tamil Nadu (India)
DURATION : FEB-2010 TO MARCH-2011

5) COMPANY : DRYDOCKS WORLD- DUBAI (GOVERNMENT OWNED SHIPYARD)
DEPARTMENT : New building
DESIGNATION : Mechanical Engineering Draughtsman
DURATION : Around 4 YEARS - MAY-2006 TOJAN-2010

6) COMPANY : MEENAKSH HOSPITAL, CHENNAI, INDIA.
Designation : MECHANICAL ENGINEER
Duration : 3 Years – Aug-2003 toApr-2006

7) COMPANY : ZEECO (BATHMINI) CORPORATION LTD., CHENNAI, INDIA.
INDUSTRY: STEEL REROLLING MILL
DESIGNATION: MECHANICAL ENGINEER
DURATION: 2 YEARS - MAY-2001 TOJULY-2003

9) COMPANY: KRISHFABRICATION PVT LTD., CHENNAI, INDIA.
INDUSTRY: Front engine structure for Ashok Leyland &Tafe
DESIGNATION: DEVELOPMENT ENGINEER
DURATION: 6 YEARS - JULY-1995 TOMAY-2001

10) COMPANY: SAHUCYLINDERS & UDYOG PVT. LTD.CHENNAI, INDIA.
INDUSTRY: MANUFACTURER OF L.P.G.CYLINDERS
DESIGNATION: SHIFT IN CHARGE
DURATION: MARCH-1994 TO JUNE-1995.

11) COMPANY: CENTURY SAFETY GLASS IND. PVT LTD.CHENNAI, INDIA.
INDUSTRY: Mfg OF FLUTE & TOUGHEDGLASS FOR AUTOMOBILES
DESIGNATION: PRODUCTION ENGINEER.
DURATION: JANUARY-1993 TO MARCH-1994.

12) COMPANY: SIDCO Industries Pvt. Ltd., CHENNAI, INDIA.
INDUSTRY: MANUFACTURER OF TOOL &JIGS (DRAFTING)
DESIGNATION: PRODUCTION SUPERVISOR
DURATION: JANUARY-1990 TO JANUARY-1993.
Responsibilities
Assure that environment health and safety procedure and rules are respected. Maintenance of static and dynamic equipments.
Monitored strict compliance of procedures, quality, productivity, and efficiency of works.
Material management for piping systems. Co-ordination with the Client for solution of technical issues.
To assign task to all workers in their necessary field of expertise. Supervise the performance of site workers to ensure the respect of work Standards
Hydro testing and air blowing of all vendor package Piping. Inspection of line completion prior to hydro testing. Modification of Pressure Vessels, Reactors & Piping system. Fabrication and Erection of high and low Pressure Piping.
Supervise all fabrication of piping. Conducting inspection regularly and prior to commencing any major activities at project site.
Prepared regular progress report. Prepared daily works activity reports. Planning, Scheduling, and Site Supervising as per project manager advice. Perform other function as may be assigned. All tubing & Piping work, leak test, pre commissioning, commissioning, material handling, material coordination, and following to provide employee and equipment Safety During the erection, lifting materials that we consulting the safety officer. Familiar with material inspection, dimensional check, documentation of WPS welder qualifications in different positions. Inspecting welding traceability drawings by AutoCAD Draughting. Arrangements for NDT QC inspections with the inspection crews. Coordinating With 3rd Party NDT inspection bodies for carrying out welding and Mechanical Testing’s such as penetration test (PT),(RT) Radiographic Testing, (UT) Ultrasonic Testing, Magnetic particles Examination(MPI) Mechanical Testing as per the approved Clients Specifications and requirements. Site Responsibility for arranging Work Inspection Request for the finished works. Monitoring the Production and the Erection process periodically Monitoring technical issues and also whether the fabricators, Welders, Painters, Erectors, Blasters, Galvanizers are following the approved Work Instructions or not. Attending weekly QA/QC meetings, safety meetings. Ensuring the QA Certificates for raw materials. Checking the date of machine and equipment calibration certificates. Co ordinations in team building according to the work schedules. Regular updating of schedules, site visiting for material arrangements.
I have the ability in executing work scopes with minimal dependency, with team work Attitudes along With transnational human recourses and motivating the work force in achieving the tasks timely.
Yours faithfully,
Mohamed silar wahab B.E. MECH.