Al Suwaidi Industrial Services Saudi Arabia : Rotating Equipment Technician

[Admin]

Al Suwaidi Industrial Services Co
http://www.suwaidi-industrial.com.sa

Keywords: rotating equipment technician, rotary, machine, pumps, steam, gas, turbine,

Designation: Rotating Equipment Technician
Experience: 5 - 10 Years
Location: Saudi Arabia
Compensation:
Depends Upon Qualification & Experience
Education: UG - Any Graduate - Any Specialization;Graduation Not Required
PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Production, Maintenance, Quality
Posted Date: 25 Sep 2008

Job Description
able to diagnose eqpt faults & carry out corrective repairs. Can be conversant with eqpts alignment techniques. Must be familiar with work permit procedures & safety procedures as applicable to the petrochemical industry.

Desired Candidate Profile
Shortlisting in Progress. Personal Interview with Client will be in Mumbai 12 & 13 Oct on & Chennai 14 Oct respectively. Send/Contact CV immediately at our email id enabling to forward the same to our client in Saudi Arabia

Company Profile
One of the leading & highly diversified Business Group in the KSA with a number of Strategic Business Units within its fold, headquartered in the Eastern Province, KSA employing a large multinational workforce exceeding 13000+ from 32country

Executive Name: Mr.Shakeel / Aslam

Address:
Unique Overseas Consultant
Mastan Shopping Centre
Byculla House, Clare Road
Mumbai,Maharashtra,INDIA 400010

Email Address: uniquehrd@gmail.com, uniqueoc_aslam@yahoo.com

Telephone: 91-22-23006555

Reference ID:
SIS - Rotating Equipment Technician

[Guest-IJT]

Name : Deblina Mukherjee
Email : deblinamukherjee.xlnc AT gmail.com
Designation / Skillset : Quality assurance
Sir/Mam
I would be thankful to you if you kindly allow me to work with you.I am very much sincere about my work and i will assured you that if you give me a chance i will give my best with honesty.

Resume :

OBJECTIVE
I want to utilize all my key-strengths and my learning capability for the cause of my employer being resourceful and innovative, by which my organization can grow better and my career becomes a satisfying one.
KEY STRENGTH
# Self-Confidence # Fast learning capability # Smartworking
# Communication skill # Spirit of Teamwork # Full devotion & responsibility to words duties
ACADEMIC QUALIFICATION
Course University/Board Year Institute Percentage
Madhyamik W.B.B.S.E 2004 Railway Higher Secondary School
83.37%
10+2
W.B.C.H.S.E
2006
Railway Higher Secondary School 72.7%
Graduation[B.Sc(H)in
Microbiology)] North Bengal University(N.B.U)
2009 Ananda Chandra College(A.C.College) 58%
Post Graduation(M.Sc) in MICROBIOLOGY North Bengal University(N.B.U)
Pursuing North Bengal University(N.B.U)
PROFESSIONAL QUALIFICATION
1. Participate in the national conference of MIDICON 2010 about “Diversity & Prospects of Microbial resources” held at North Bengal University(N.B.U)
2. Experienced with 4 months dissertation .
COMPUTER QUALIFICATION
MS-office #
EXTRA CURRICULAR ACTIVITIES
# Painting
HOBBIES
# Reading various types of books # Listening Music

LANGUAGES KNOWN
# English, Hindi & Bengali
DECLARATION :
I, Deblina Mukherjee, declare that all the information given above are true to the best of my knowledge and belief and I have substantial proof to support them.
SIGNATURE
Deblina Mukherjee
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4395226
Date & Time : 21st Jul 2011 5:22 AM (UTC)
IP Address : 223.179.147.229
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; AskTbMPC2/5.12.2.16749)
Predicted Country []: --

[Guest]

RESUME FOR THE POSITION OF “Sr Mechanical Technician
CAREER OBJECTIVE : ________________________________________________________
To work in a renowned and prestigious company on responsible position as a Mechanical Technician with the utilization of technical knowledge and extensive maintenance experience.
PERSONAL INFORMATION : __________________________________________________
NAME : SUDHIR P. PATEL
E-MAIL : sudhir_patel2006 AT yahoo.com
EXPERIENCE : Total experience of 15 years in various chemical and petrochemical
companies on various ROTATING and STATIC machineries.
ACADEMIC BACKGROUND : __________________________________________________
1) Passed S.S.C. examination in 1988 from Gujarat Board, Vadodara.
2) Passed I. T. I. examination in the trade of “Fitter” in 1990 From Industrial Training Institute, Tarsali, Vadodara.
OTHER QUALIFICATIONS : ___________________________________________________
1) Good experience of handling and operating the fire fighting Equipments like Monitor, Hydrant, all types of fire extinguishers etc.
2) Active participation in ISO-9001/2000(QMS) and ISO-14001 (EMS)
3) Well-versed with basic computer skills such as MS-word, MS-Excel, Internet/E-mail etc.
DETAILED EXPERIENCE : _________________________________________________
1) Presently working in EMKAY CONTRUCTION &ENGINEERING CONTRACTOR in Refinery, petrochemical and fertizer plant in Gujarat, as a ROTARY and STATIC Equipment Superviser.
The scope of my day to day work activities is as mentioned below :
1) Overhauling of all types of centrifugal pumps, reciprocating pumps, rotary pumps and diaphragm pumps. The equipment manufacturers are- KSB, Sulzer, Kirloskar, Antico, Flow-chem, Investa etc.
2) Overhauling of Reciprocating compressors (K.G.Khosala) of capacity 550 m3/hr at 7 kg/cm2.
3) Overhauling of Screw compressors (Chicago Pneumatic) of capacity 200 m3/hr at 7 kg/cm2.
4) Overhauling of simple and compound gear boxes such as spur gear boxes, single helical/ double helical gear boxes, worm and worm wheel type gear boxes of manufactures such as Greaves India and Elecon.
5) Overhauling and maintenance of various types of material handling equipments such as screw conveyors, belt conveyors, bucket elevators etc.
6) Experience of working on agitators and reactors such as GMM Pfaudler, Steelcon etc.
7) Experience of working on Refrigerant Systems such as 150 TR/131 TR/71TR (Ammonia) and 26 TR/7.5 TR (Freon) of various manufacturers such as Sabroe, ACCELL and Kirloskar
8) Well-conversant with all types of mechanical seals such as single seals, double seals, bellows type seals, cartridge seals from various manufactures such as John Crane, Eagle-Bergmann, Dura-Metallic, Bergmann, Velmake, and Flowserve etc.
9) Worked on variety of special equipments such as Rotary Dryer, Rotary Cooler, Ribbon Mixture etc. manufactured by Kilburn Engineering ltd (Capacity : 36 Tons/Day).
10) Rich hands on experience of working on heat exchangers such as Shell & Tube type, Plate Type Heat Exchanger (PHE), Fins type coolers etc.
11) Excellent experience in erection, commissioning and pre-commissioning of rotating and static equipments.
12) Worked in various chemical plants such as Ethylene Oxide, Tri Methyl Amine, Butadiene, Styrene, Xylene, HCL, Caustic plant etc.
PREVIOUS EMPLOYERS : _____________________________________________________
1) 28th May 2011 to 4th June 2011 :
Worked as a Mechanical Supervisor in Kenya Petroleum and Refinery Ltd., Mombasa , Kenya.
2) 18th March 2009 to 28th april 2011 :
Worked as a Mechanical Technician in SABIC affiliate companies such as Saudi Kayan Petrochemical Company, Jubail, Saudi Arabia,
3) 17th November 1997 to 4th March 2009 :
Worked as a Senior Mechanical Technician in Jubilant Organosys Limited, Savli, Vadodara, an ISO 9001 and ISO 14001 company. The company produced variety of chemicals such as Animal feed chemicals and Vinyl Pyridine Latex from Ethylene Oxide (EO), Tri-methyl Amine, Butadiene, Styrene, Xylene, Vinyl Pyridine Monomer and Hydro Chloric Acid
4) June 1996 to April 1997 :
Worked as a Millwright Fitter in EQUATE Ethylene Plant Project, Kuwait.
5) May 1995 to May 1996 :
Worked as a Mechanical Technician in Hindustan Nitro Product Limited, Jambusar, Bharuch. During this period, I handled many types of equipment such as centrifugal pumps, air compressors, Nitrogen compressors, Naphtha Cracker unit, maintenance of Nitro-Benzene plant, Aniline plant etc.
6) September 1994 to May 1995 :
Worked as a Mechanical Fitter in M/s Pawan Enterprises located at Essar Power Limited, Hazira, Surat. During this work, I was involved in the assembly and maintenance activity of Turbine (100 MW).
7) May 1992 to August 1994 :
Worked as Maintenance Fitter in Image Engineering Pvt. Ltd. at Baroda. Our working site was IPCL and Vadodara Refinery. My day to day work included repairs and servicing of all types of pumps such as centrifugal pumps, rotary pumps and reciprocating pumps.
8) April 1991 to April 1992 :
Worked as an “Apprentice Trainee” in Sayaji Iron and Engineering Works Ltd., Vadodara. My work activity consisted of assembly of Road Crusher, Vibrating Screen, Hammer Mill, Universal Grinder etc.
9) September 1990 to April 1991 :
Worked as a Fitter in “M/s Narinder Engineering” in “Gujarat Refinery” and “IPCL”. Mu work included the repairs and servicing of various types of process pumps such as rotary pumps, centrifugal pumps and reciprocating pumps.
1) Capability to work on responsible positions in shifts. Good experience and knowledge of work permit system. Ability to travel and relocation as per work requirements.