Infospace Technologies India : Saudi Arabia : WELDING INSPECTOR

[Admin]

Infospace Technologies (India) Private Ltd
http://www.infospacetechindia.com

Keywords: CSWIP 3 1 and or AWS, CWI

Designation: WELDING INSPECTORS
Experience: 0 - 3 Years
Location: Saudi Arabia
Compensation: Rupees 8,50,000 - 12,00,000
ADDITIONAL SITE ALLOWENCE - Rs 10000 per month and TRANSPORTATION, HOUSING, FOOD, MEDICAL COVERAGE are provided
Education: UG - B.Tech/B.E. - Any Specialization;Diploma - Any Specialization
PG - B.Tech/B.E. - Any Specialization;Diploma - Any Specialization
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Production, Maintenance, Quality
Posted Date: 05 Aug 2008

Job Description
CSWIP-3.1 and/or AWS, CWI Oil and gas field, Experienced and fresh candidates can apply

Desired Candidate Profile
Our clients looking for recruit Welding Inspector for their projects in Saudi Arabia, Candidates should have experience of CSWIP-3.1 and/or AWS, CWI

Company Profile
INFOSPACE TECHNOLOGIES is one of the leading players in the Global Market on Software Development and Software Consultancy. At present Infospace is looking for Welding Inspector for our client in Saudi Arabia.

Executive Name: Mr.S.Stephen Raj

Address:
Infospace Technologies (India) Private Ltd
28 Natesan Street
1st Floor, T.Nagar
Chennai,Tamilnadu,INDIA 600017

Email Address: sraj@infospacetechindia.com

Telephone: 91-044-64530991

Reference ID:
IST/WI

[Guest]

Respected sir
i am Ananda kumar. V(AWS, CSWIP )
A2/129, BHEL Township,
Trichirappali-620014
Email-id: vamgpt AT yahoo.co.uk , anandviji1975 AT gmail.com

Good knowledge in welding procedures, WPS, WPQR, PWQR and Fabrication process, QA/QC formats and reports with computer, SMAW, SAW, GMAW, FCAW and GTAW, pipe fit-up as per drawings, NDT methods for external testing agencies, Radiographic film evaluation.

Familiar with material inspection,Dimensional check and documentation as per construction material standards such as ASTM/ASME SA 106,SA 515,SA 516,SA 105,SA 312,SA 240,SA 234 etc and with ANSI standards of B 36.10,36.5,B 16.9 etc.

Thorough knowledge in welding standards of ASME section IX and and API 1104.Familiar with Welding procedure qualification,P numbers,selection of electrodes,Weld visual inspection etc.

Good knowledge in radiographic interpretation of weld joints,ultrasonic inspection,magnetic particle inspection and penetrant testing,reporting and documentation.

Fabrication of pipping,structure,pressure vessels & other Equipments,documentation of history sheet,Test pack clearing etc
confident to handle the construction and quality control activities as specified in the drawings and applicable standards and specifications.

[ali.farooq67]

CURRICULUM VITAE

Name : Farooq Shahid Ali
Father’s Name : Shahid Irshad Ali
Address : Jupiter 3/Flat No.301, Nav Kiran Marg, 4 Bungalows, Andheri (West), Mumbai-400053,Maharashtra ,India.
Contact No. : 00919820712223
E-mail ID : Ali.farooq67 AT yahoo.in

Passport Details : Place of Issue- Thane
Date of Issue-11/06/2002
Date of Expire-10/06/2012
Passport No.-E2330456

Date Of Birth : 30/07/1986
Sex : Male
Marital Status : Single
Nationality : Indian
Languages Known : English, Hindi, Marathi, Urdu & Arabic
Qualification : S.S.C passed from Maharashtra Board.
Additional Qualification : D.M.E passed from MSBTE.
Computer Skills : Basics & Autocadd
Experience : 6-months in Maintenance, Repair & Overhaul Division of Air India Ltd. as a Trainee.
Place : Mumbai
Date : 13/07/2009

[satkumar]

I am forwarding my updated Resume as per your requirement.Please reffer below details.
Regards
Sateesh Kumar

Sateesh Kumar V.R
Shivadham,
Near AKG housing colony,
Kannur, Kerala,
India – 670 002

Land phone: +91-497-2702549
Mobile: +91-944-7889199

Email: satkumar1123 AT gmail.com,
satkumar1123 AT rediffmail.com,
vellurrayaroth AT yahoo.com

CURRICULUM VITAE
Profile:
I have more than 19 years of experience in Oil & Gas industry in the field of Quality Control related activities. I have experience in inspection of Piping, Pipeline, Tanks, Pressure Vessels, Structural steel and all non-destructive and destructive testing. I am conversant with most of the international codes & Standards such as ASME, ASTM & API.

Nature of Duties:
Responsible for time to time monitoring and surveillance of welding activities for SMAW, GTAW, SAW FCAW, SW process for the fabrication of CS, LTCS, ALLOYSTEEL, SS , LTSS and CLADED STEEL material in Fabrication shop and Field and Witnessing of NDT activities such as MPT, LPT, PLT, VBT as per ITP & QCP and review of all documents.
I have experience in coordination with Client Inspectors for various inspection activities as per Quality Control Plan. I was responsible for review of WPS and witnessing the PQR test and Welder Qualification test for steel and Polyethylene Line, Fusion Visual Inspection, various Bend Tests and preparation of reports as per quality control plan and procedures.
Monitoring and surveillance of dimensional checks of tanks such as Peaking, Banding, roundness, levelness and Plumbness checking in every stage of erection in Storage Tanks to ensure that the tolerance are meeting as specified in the applicable code, standards, and Client specification.
Monitoring and Witness for the Vacuum Box Test for Tank Bottom plate lap joints, Oil penetrant Test for Tank Corner joints & Pad leak test for Nozzles.
Monitoring and Random Witness for Settlement Reading on each stages of Water filling for Hydro Test of Storage Tanks by instrument like optical Level.
Detecting the unacceptable trends, before, during and after welding and after confirmation with procedures and Specification, initiating corrective action.
Monitoring and surveillance of pipe line activities such as stringing, welding, lowering, tie-in, coating, holiday test, pigging and hydro test.
Interpreting the RT films and approving accepted and rejected joints as per B 31.3, B 31.1(piping), API 1104 (pipe line) and API 650 for storage thanks
Time to time monitoring and surveillance of welding consumable control such as reviewing daily log book, batch no against electrode, temperature control for drying oven and heating ovens and quivers.
Review of test packages and line check for pipe line, piping, tanks and punching out the lines before Hydro test.

Monitoring and surveillance of different type of pipe line inspections as per QCP such as reviewing of RT filims, Drawings, Material certificates, WPS, QC Procedures.
Witnessing of Welder qualification, PQR, Installation of pipe lines under Roads and Rail cross, Pipe line lowering, Holiday test before lowering of pipe line and Hydro test.

Project handled - 6” flow lines at PDO and 24” Natural gas line from Aramco to Ma’aden Phosphate Project at Ras As Zawr, KSA
Attending QA/QC weekly meeting with PMC QC group leader and contractors’ QC team for discussing unacceptable problems and propose solutions.
I also have experience in –
* Implementing safety requirements during welding &NDT.
* Material receiving Inspection as per procedure.
* Documentation as per company quality plan.
* Witnessing of Hydro test and reinstallation.
* Witnessing of Bolt tightening (Torque test) of structural steel and Equipments.

Academic Qualification:
Diploma in Engineering (Mechanical), Scientific & Technical Education Development Council, Government of Kerala, India.
Technical Certifications:
* Certified Welding Inspector (CWI): American Welding Society (AWS), Valid till 2012
* Level II Radiography Test (RT): ASNT, Valid till 2012
* Level II Magnetic Particle Test (MPT): ASNT, Valid till 2012
* Level II Liquid Penetrant Test (PT): ASNT, Valid till 2012
* Level II Leak Test (Pad Leak & Vacuum Box): ASNT, Valid till 2012
* Level II Visual Inspection (VT): ASNT, Valid till 2012
* Level I Ultrasonic test (UT): ASNT, Valid till 2012

Career Profile:
1. Duration: December 2008 – August 2009
Company: Worley Parsons, in Project Management Team
Project: MA’ADEN Phosphate Project at Ras As Zawr Site, KSA
Position: Welding / Piping Inspector

2. Duration: July 2008 – November 2008
Company: J&P for Aramco Project
Project: Nuayim GOSP
Position: Welding Inspector. Aramco SAP no: 70009568

3. Duration: Jan. 2006 to Jan. 2008
Company: Chiyoda-Technip JV
Project: QG-II, LNG Project, Ras Laffan, Qatar
Position: Welding/ Piping Inspector

4. Duration: Nov. 2005 to Dec. 2005
Company: Show-Nass Pre- Fabrication, Middle East Bahrain for JGC Qatar
Project: Dolphin energy, Ras Laffan, Qatar
Position: Welding Inspector

5. Duration: May 2004 to October 2005
Company: Chiyoda–Foster Wheeler & Co. LLC
Project: QLNG, SUR, Sultanate of Oman
Position: Welding / Piping Inspector

6. Duration: Jan 2002 to Jan 2004
Company: Galfar Engineering & Contracting LLC. Oman
Project: North Oman Engineering Service Contract of PDO
Position: Welding and PE line Inspector

7. Duration: September 1996 to April 2001
Company: PDM Saudi Arabia, Yanbu
Project: Various SSSPs in Riyadh, Abha, Jeddah, Medinah, AHG, Ibn Rushed, Yanpet, Yanpet Exp Phase of Sabic etc.
Position:Welding Inspector & NDT Coordinator

8. Duration: July 1995 to October 1995
Company: Alkhaja Cooperheat, UAE
Project: Thamama Project, ADNOC, Abu Dhabi
Position: NDT Inspector

9. Duration: July 1993 to October 1994
Company: Finesco International, Kuwait
Project: Mina Abdullah Refinery, KNPC, Kuwait
Position: NDT Inspector

10. Duration: April 1992 to April 1993
Company: Saipem Italy, Iran
Project: Arak 7th Refinery, NIOC, Iran
Position: NDT Inspector

11. Duration: April 1988 to April 1992
Company: Test Well NDT Services, Bombay
Projects: RPL-Gujarat, Union Carbide India Ltd, R&C Ltd, BVG Equipments Ltd, and Indus Ltd, SPIC-SMO and various other companies in Bombay
Position: NDT Inspector

Other Certifications and Short Courses:

HDPE inspection training: Amiantit Oman
PTW Signatories Training: PDO, Oman
H2S Awareness Escape Training: PDO, Oman
First aid training: PDO, Oman
Defensive Driving L/V Black Top & Graded Road: PDO, Oman
Safety Training Observation Program (STOP): PDO, Oman

Passport Details:
Passport Number: E 8861047
Issued on: 2004
Valid up to: 2014
Issued at: Kozhikode

Other Details:
Date of Birth: 26th March 1964
Nationality: Indian
Languages known:English, Hindi, Malayalam, Tamil
Driving Licenses: Indian, Oman, Qatar, Saudi

Thank you,

Yours truly,
Sateesh Kumar

[suhail4038]

Respected Sir,
I have read about the requirement of the company. I am a fresher{2009 passed out} B.E/Mechanical from C.Abdul Hakeem College of Engg & Tech, Vellore, Tamil Nadu. I am exposured to mechanical design softwares like Autocad, Pro-E. I am really looking out for working in challenging atmospheres in core fields. I hope i will get a favourable reply from your side.

Yours sincerely,
Suhail Ahamed.A
Mobile no: +919787575072
email id: max.suhail AT gmail.com

[ogvenkat72@yahoo.com]

CURRICULAM VITAE

OF

G.VENKATACHALAPATHI

Email :- ogvenkat72 AT yahoo.com

Post Applied For : QA/QC Welding Inspector
I have worked with TANMIA FOR OIL& CONSTRUCTION LIMITED,Yemean as a Welding Inspector and also 15 years working Experience as a QC Welding Inspector with Consolidated Contracting International Company S.A.L-Qatar, Dodsal Pte Limited-Qatar, Lahoud Engineering limited-UAE and in India with Petrochemical, OIL/GAS and Refinery Industries ,.
Having valid Driving Licenses D.L.No-TN69z20030000635 (LMV) for India
Computer skills on MS Word, MS Excel & MS Power Point

Academic Qualification :
B.Sc Degree (Physics) 1992-1995 with First class in S.R.N.M.College,
Madurai Kamarajar University, Tamil Nadu, India

B.Tech (Mech)
(Rajasthan Vidhyapeeth University)
Technical Qualification :
AWS-CWI- (CERTIFICATE NO-10022711)
CSWIP 3.1 (CERTIFICATE NO- 47221)
ASNT LEVEL II- RT, UT, MT & PT
Key Skills
1. Codes and Standards :
API 1104, ASME B.31.3, ASME 31.4, ASME 31.8, ASME SEC IX, ASME SEC II, API 5L, ANSI B.16.5.AWS D1.1
2. Documentation :
WPS, PQR, welder qualification, As-built drawing preparation, construction quality procedures and method statements.Daily welding reports and NDT requests
3 Pipe and Pipeline Inspection :
Welding and Piping for Petrochemical Plant, Gas Plant, Refinery and cross country Pipeline.
EMPLOYMENT HISTORY IN ABROAD-5 Yrs
1. Project : KHARIR CCU EXTENSION
Company : TOTAL E&P YEMEN
Organization : TANMIA FOR OIL & CONSTRUCTION LTD,YEMAN
Period : From 25 Sept 2010 TO Still Now working in Yeman
2. Project : Ras Gas Onshore Expansion project Phase II
(Train 6,7 & AKG II EPC)
RasLaffan,Qatar.
Client : Chiyoda Technip Joint Venture
Company : RasLaffan Liquefied Natural Gas Co Ltd
Organization : Consolidated Contractors International Company
Position held : QC Welding Inspector.
Period : From Nov 23 -2007 To Nov 05-2009..
3. Project : Qatar Gas 3&4 Onshore (LNG) project.
RasLaffan, Qatar.
Client : Chiyoda Technip Joint Venture.
Company : Qatar Gas Co Ltd/shell/conoco Phillips.
Organization : Consolidated Contractors International Company
Position held : QC Welding Inspector.
Period : From Nov 06 -2009 To Dec19-2009

4. Project : Upstream and Compression Facilities (Gas Project)
Ras Laffan, Qatar.
Client : JGC Corporation
Company : Dolphine on/off shore Engg
Organization : Dodsal Pte Limited
Position held : Welding QC Inspector
Period : From 29/01/2006 To 02/09/2006
5. Project : ULG/LSGO Project, Ruwais Refinery, Abu Dhabi.
Client : Technip, Italy
Company : parson Engg
Organization : Lahoud Engineering Co. Ltd., Dubai
Position held : Welding Inspector /NDT Co-ordinator
Period : From 22/08/2003 To 03/03/2005
EMPLOYMENT HISTORY IN INDIA -10yrs
6. Organization : Plus Tech Engineering pvt ltd
Client : LARSON &TOUBRO LTD, HAZIRA, SURAT
Company : ONGC
Project : BCP-B2
Position held : Welding Inspector
Period : From Nov 2006 To Oct 2007
7. Organization : Bridge & Roof Co (India) Ltd,
Project : Chennai Petroleum Corp. Ltd (CPCL) Project
Position held : Welding Supervisor/NDTCo-Ordinator
Period : From May 2001 To March 2003
8. Organization : Gulf Engineers And Constructors (P) Ltd – India
Project : Group Gathering Station (Ggs) Project
Position Held : Welding Foreman
Period : Jan 1997 To Jan 2001
9. Company : Gopec Engineering (P) Ltd – India
Project : Adkm 01 – Adkm 09 Project (Ongc)
Position held : Trainee Foreman
Period : July 1995 To June 1996
JOB RESPONSIBLITIES
- Implementation and monitoring of CQP, method statements.
- Control Weld quality as per ITP, Procedures and Standards. Maintain QC records
- Inspection of cross-country pipelines, piping, and utility piping.
- Control, management and execution of all project activities as per specification codes and witness procedures.
- Knowledge of plant piping & Fittings.
- Inspection of piping spools, fittings & other Materials.
- Experienced in WQT, PQR and Preparation of WPS.
- Witnessing Welder Qualification and Welding Procedure Qualification
- Experience in piping / Systems:
- Process / Power Piping Works for Oil Gathering Stations / Centers and Gas Plants, Petro-Chemical Plants, Power Plants as per ASME B31.1, B31.3, BS 1113 and Shut down .
- Pipelines and Flow lines for Transportation of Oil & Gas products as per API 1104, ASME B 31.4, B31.8 and Clients Specification. Worked for BELHAF EPRS PIPELINE PROJECT
- Structures and Duct works for Piping Rack, Gas Turbines and Boilers (Including Heavy Columns and Girder Beams of Boilers)
- Analysis of failures, solving the same and providing Technical supports for elimination / reduction of defects / distortion and improving the productivity.
- Knowledge of film interpretation/evaluation of Radiographic Films of Welds and Witnessing / Interpretation of Ultrasonic Testing of Welds, Plates, Pipes, MT/PT of welds
- Material Checking (ISO Bill of material, Color coding, stamping)
- Checking weld joint preparation, fit up, alignment & dimensional inspection as per drawings
- Review of received filler and consumable Test Certificate (TC).
- Monitoring of consumable storage, handling, packing and drying temperature as per project approved procedure.
- Monitoring of Pre heat, Inter pass temperature and inter pass cleaning as per WPS.
- Visual inspection of welded joint profile, surface finish and defects.
- Monitoring PWHT, Hardness checking, PMI checking of pipe spools.
- Test Pack review and documentation.
- Witnessing hydro test and pneumatic test.
- Familiar with Welding processes as GTAW, SMAW, FCAW, and SAW.
- Coordinated and communicated with fabrication supervisor, fitters, welders and inspection personnel of clients
The followings are from my experience generally covers in the Quality assurance through Inspection of
- Carbons steel : ASTM A106 Gr.B, ASTM A105, A234 WPB,
API 5L X52 PSL2,API X70,A672-C65&Galvaized CS etc.
- Carbon steel for low temperature : ASTM A333 Gr.6, A671-CC60, A350-LF2, A420 WPL6…
- Low alloy steel for high temperature : ASTM A335 P11,A234 WP11,A691-1,A182-F11

- Stainless Steel : A312-TP304,A358-304L,A182-F304L,A403-WP304L,
A240-304L.
- Nickel Alloys steel : ASME SA 204 Gr,ASME SA 203,
- High alloyed corrosion resisting : INCONEL-82, KOBELCO TGX-308L.

[Guest]

Umesh Chand Bhardwaj
Email : bhardwaj_umesh79 AT yahoo.com
Position : QA/QC Welding Inspector/ Engineer

Objective
To whole the responsible position on sector and invoke myself in a team of quality deportment where my skill can be utilize towards growth development of the organization to the best of my knowledge and abilities and establish myself as an asset to the Organization.

Educational Qualifications
- Diploma in Mechanical Engineering
- GRADUATION FROM ALLAHABAD UNIVERSITY
- POST GRADUATION FROM ALLAHABAD UNIVERSITY
Technical Qualification

- AWS CWI (Certified Welding Inspector)
- CSWIP Bridging
- Lead Auditing Training Course (ISO 9001 :2008)
- ASNT NDT Level II Ultrasonic Testing
- ASNT NDT Level II Magnetic Partical Testing
- ASNT NDT Level II Radiographic Testing
- ASNT NDT Level II Penetrant Testing
Career synopsis
Having more than 7 years of knowledge & experience in field of Petrochemical Industries, Gas Plants, Refineries, and Power Plants, Fabrication shop & Cross country Pipeline in various project sites in welding inspection & NDT. Have thorough knowledge in selection, Radiographic film interpretation & evaluation of NDT (LPT, UT, MPI & RT) as per project requirement & specifications.
EXPERIENCE
Employment Details

- HYUNDAI ENGINEERING & CONSTRUCTION CO. LTD.
- Position : QA/QC Welding Inspector
Project : Habsan-5, Utilities and offsite project, UAE, Abudhabi
Duration : 09.06.2011 TO till now
Site : Abudhabi, UAE
Duties and Responsibilities :
- Carry out Radiographic film interpretation of Piping, Pipeline, Tank, Plate, and WQT as per project codes and standard.
- Witness NDT activities such as Radiographic testing, magnetic particle testing, ultrasonic testing, and liquid penetrant testing as per project specifications.
- Witness Positive alloy material test and evaluate PAMI reports.
- Review NDT reports and weld repair procedures.
- Witness and evaluate PWHT reports.
- Carry out tank inspection as per project specification.
- Carry out regular Reviews and Inspections of field / shop welding operations to ensure WPS parameters are followed.
- Monitor welder performance, repair rate, etc, and ensure their compliance within the acceptable scope of the project specifications.
- Witness for MPI, LPT and UT of welds as per project specifications.
- Check the welding procedure and welder qualification; witness welding procedure qualification & welder performance qualification and testing and recording.
- Witness Fit up, Visual, Dimensional inspection & Monitoring of Welding parameters during welding.
- To check on going welding process.
- To ensure the fulfillment of NDT requirement.
- Check finished weld appearance and dimensional accuracy.
- Select/witness production test samples.
- Witness for hydrostatic or pneumatic test.
- Prepare and maintain Inspection Reports for future reference.
- Implementing and following of company Quality & HSE policy.
- Fully aware of permit to work system.
- Ensuring that the welding activities are done as per approved WPS, PQR WPQ (ASME
Section IX & API 1104)
- Construction and Commissioning of Projects & Preparation of Project Test Packs
- Ensure the work is done complying with the necessary safety standards.
- Co-coordinating with Third Party & the Client for the issue of Final Inspection Reports & Release Note.

- PANIPAT REFINERY LTD., PANIPAT
- Position : QA/QC Welding Inspector
Project : Panipat Refinery Project
Duration : 02.01.2010 TO 06.08.2010
Site : Panipat (Haryana)
Duties and Responsibilities :
- Check the welding procedure and welder qualification; witness welding procedure qualification & welder performance qualification and testing and recording.
- Evaluate WPQT, PAMI, UT, PT, & MPT reports.
- Carry out regular reviews and inspection of field/Shop welding operations to ensure WPS parameters are followed
- Witness Fit up, Visual, Dimensional inspection & Monitoring of Welding parameters during welding
- Prepare of weld pad test coupon as per ASME sec 11 part C
- Coordinate with Inspection Engineer and Third Party Inspection authorities.
- To check on going welding process.
- Coordinate with welders for quality job & monitor welder performance, repair rate, etc and ensure their compliance within the acceptable scope of the project specifications.
- To ensure the fulfillment of NDT requirement.
- Check finished weld appearance and dimensional accuracy.
- Select/witness production test samples.
- Check or carried out RT film interpretation. Random witness MPT, LPT & UT of welds as per project specification.
- Prepare and maintain Inspection Reports for future reference.
- Review of the TC’s for the material used for painting & ensuring its conformance as per project specification. Blasting & painting inspection as required by ITP.
- Implementing and following of company Quality & HSE policy.
- Fully aware of permit to work system.
- Construction and Commissioning of Projects & Preparation of Project Test Packs.
- PEMCO INSPECTION CO. DOHA QATAR
- Position : NDT Inspector
Project : (DOPET) DOHA PETROLEUM & QATAR PETROLIUM
Duration : 20.10.2008 TO 12.09.2009
Inspection : M/S PEMCO INSPECTION CO. QATAR
Site : DOPET, SALWA INDUSTRIAL AREA, DOHA
Duties and Responsibilities :
- Monitor NDT activities such as Radiographic testing, magnetic particle testing, ultrasonic testing, and liquid penetrant testing as per procedure.
- Review NDT reports and weld repair procedures.
- Carry out radiographic film interpretation of pipeline, piping, tank, and plate.
- Carry out visual inspection if required.
- Get all NDT request from Client and submit all the NDT details to Client as daily basis.
- Monitor MPT, LPT, UT, and RT activities.
- Carry out regular Reviews of all the NDT reports according project specification.
- Monitor welder performance, repair rate, etc, and ensure their compliance within the acceptable scope of the project specifications.
- Interpretation of radiographic films.
- Witness for MPI, LPT and UT of welds as per project specifications.
- Ensure the work is done complying with the necessary safety standards.
- Co-coordinating with Third Party & the Client for the issue of Final Inspection Reports & Release Note.
- SIEVERT INDIA PVT. LTD.
- Position : NDT INCHARGE
Field : Kalpataru Power Transmission Ltd.
Project : Bharat Oman Bina Cruide Pipeline Projects
Duration : 03.10.2003 TO 16.10.08
Inspection : M/S EIL
Purpose : Laying of 24” Cruide Oil pipeline
Site: Ujjain (MP)

Duties and Responsibilities
- Monitoring all the NDT testing such as RT x-ray, RT gamma ray by all four technique, DWDI (double wall double image)-elliptical and superimpose, DWSI (double wall single image), SWSI (single wall single image), and Panoramic.
- Familiar with various NDT inspections involved in construction of pipelines and flow lines.
- Get all NDT request from Client and submit all the NDT details to Client as daily basis.
- Carry out radiographic film interpretation of pipeline, piping, tank, and plate.
- Witness for MPI, LPT and UT of welds as per project specifications and submit report to client.
- Monitoring Crawler x-ray radiography and external radiography (internal and external RT).
- Handling site with proper manpower.
- Monitoring the NDT activities such as RT-Gamma ray and X-ray.
- Monitoring the Ultrasonic testing, magnetic particle testing, and liquid penetrant testing.
- Arrangement of manpower to the priority based job.
- Verify incoming NDT materials.
- Prepare the daily work progress report and material consumption data sheet.
- Reviewing all the NDT procedures, monitoring NDT backlog status and clearing it with a Systematic manner.
- After performing NDT inspection preparing reports, and submitting to the client.
- Preparing Daily NDT Reports after review the film and submit it to the client.
- Carry out processing of Radiographic gamma and radiographic x-ray film.
- Coordinate with NDT technicians, client, and third party inspection.
Declaration
I Hereby assure that the above mentioned information’s are true to my knowledge and belief.
Umesh Chand Bhardwaj