www.sail.shine.com Steel Authority Of India Limited Recruitment 2012 : Attendant cum Technician, Staff Assistant

[hemalathaijt]

Name of the organisation : Steel Authority Of India Limited (sail.shine.com)
Name of the post : Recruitment for Attendant cum Technician, Jr Staff Assistant in 2012

SAIL Home Page : http://sail.shine.com/
SAIL Advertisement Page : http://sail.shine.com/media/document...TEEL_PLANT.pdf

SPECIAL RECRUITMENT DRIVE FOR PERSONS WITH DISABILITIES (PWD) IN SAIL - BHILAI STEEL PLANT

Name of the post : Attendant-cum- Jr. Staff Assistant (Trainee)
Pay Scale & Scale Code : Rs. 8630-3%-12080/- Scale code (S-1)
No. of posts : 05 (Five) [Reserved - Visually Handicapped (Low Vision) – 05]
Eligibility :
Essential Qualification :
HSC with working knowledge of computer (MS office package). Preference to candidates with Graduation / PG in any subject, working knowledge of stenography
Age : Minimum 18 years & Maximum 38 years as on 01-01-2012 (After allowing age relaxation as applicable to PWDs)
Training period : Two years. During this period, a consolidated stipend of Rs. 6,600/- will be paid during 1st year and Rs. 7,700/- will be paid during 2nd year.
Sex : Male / Female

Name of the post : Attendant-cum-Technician (Trainee)
Pay Scale & Scale Code : Rs. 8630-3%-12080/- Scale code (S-1)
No. of posts : 10 (Ten) [ Reserved - Orthopaedically Handicapped (OH) – 05, Hearing Handicapped (HH) - 05]
Eligibility :
Essential Qualification :
Matriculation and ITI pass in relevant trade Fitter,Welder,Electrician,Mason, Turner, Diesel Mechanic and Motor Vehicle Mechanic. Preference to candidates with successful completion of apprenticeship training preferably in steel industry
Age : Minimum 18 years & Maximum 38 years as on 01-01-2012 (After allowing age relaxation as applicable to PWDs)
Training period :
Two years. During this period, a consolidated stipend of Rs. 6,600/- will be paid during 1st year and Rs. 7,700/- will be paid during 2nd year.
Sex : Male / Female

HOW TO APPLY :
Application typed on a plain paper, giving full particulars in the enclosed format, addressed to
Post Box No. 16,
Post Office Sector-1,
Bhilai, Distt-Durg, CG Pin – 490 001,
along with a fresh crossed non-refundable A/c payee demand draft of 50/- [Processing fees] drawn in favour of the Steel Authority of India Ltd., Bhilai Steel Plant, on any Nationalised Bank payable at Bhilai with Branch Code No., should be sent through ordinary post (Post Bag does not accept Registered Post / Speed Post etc) and must reach on or before 16/04/2012.

Last Date : 16/04/2012.

[Guest-IJT]

Name : k k varghese
Email : vargheseabc AT yahoo.com
Designation / Skillset : offshore vessel mechanic
I have 20 years work experience with various vessel s like D.P vessel,Offshore construction barge,heavy lift & pipe laying barge,jack up barge,supply vessels also.During this period my job involved under cheif engineer supervision daily running maintenanace ,all deck and engine room machinaries,accomodation area,laundry,galley etc.I hope that my application would be considered for further selection process and could grant me an interview at any time of your convinience.Thanking you for your consideration .Hoping to hear a favourable reply soon.

Resume :
Personal Documents :
Documents Number Issued date Validity Issued at
Passport E3051573 23/09/2002 22/09/2012 Cochin
Panama CDC CT 274243 01/04/2010 30/03/2015 Mumbai
Qualification :
Academic Pre-Degree PMG College, Chalakudy, Kerala
Technical ITI NCVT Mechanic Motor Vehicle
Diploma Automobile Engineering completed
Apprenticeship Cochin Shipyard, Cochin, Kerala
S.T.C.W. Course Details :
Course name Certificate Number Issued Date Issued At
P.S.S.R 006560 24/03/2010 Cochin
E.E.A 007306 27/03/2010 Cochin
P.S.T 006641 20/03/2010 Cochin
E.P.F.F 005692 17/03/2010 Cochin
H.U.E.T HUET/1084 27/01/2011 Mumbai
WORK EXPERIENCE
20 years in Middle East.
I have 20 years hand on experience with related educational background in the field of engineering with solid experience on construction operation and maintenance of different type of mechanical equipments like offshore pipe laying barges, Derrick barges, Jack up barges, D.P vessels, various work boat and tug boats.
OFFSHORE EXPERIENCE
Period from 22 nd September to 1992 to till date.
Employer : National Petroleum Construction Company (NPCC)
Valentine Maritime Gulf LLC and CCC.
Position : Charge hand mechanic-shift supervisor.
Nature of jobs : Company handling job as a offshore pipe laying, Construction jobs on the platform, Hook up jobs, Maintenance jobs on production platform, Sub-sea cable laying, Under water diving works, Riser, Tieing, Jacket installation, Heavy lifting, Deck installation, Pressure testing, Hydro Tighting, Flooding etc.
Job involved installation, Test run, Commissioning, Maintenance and Defect rectification of various offshore construction equipments, Crane, Air compressor, Generator, Pipe laying, Tensioner, Line-up system, Water maker, Various pumps, Boiler, Air-Tuggarss, Hydraulic and pneumatic tools, Accommodation and sanitary plumbing, Engine room and deck routine jobs, Fuel bunkering ballasting etc.
Responsibilities : To co-operate with superiors for performing company health safety and environmental policy, tool box, work safety, color code system functional testing to tackle and lifting equipments to the recognized code. Also very good knowledge to manage shift, arranging spare parts, daily reports, job card preparation, work permit system.
JOB INVOLVED WITH CLIENT

1. From 2010, working as a Charge hand/shift supervisor with VM Company, onboard Mari dive Construction for the project Cable laying and Pipeline in ARAMCO at Saudi Manifa field.
Main Equipments used : Plimsoll Hydraulic winch, SAS Tensioner, SAS line up, CAT generator, KOBALCO KENZE crane.
2. In the year 2009, worked as a C/H-I Mechanic with NPCC Company onboard SEP-250 for the project Hook up, Hydro Testing in ADMA at Adu Dhabi.
Main Equipments used : Jack up barge, Clyde crane, Pneumatic jacking system, Atlas COPCO compressor, CAT generator.
3. From 2008 to 2009, worked as a C/H-I Mechanic with IMI Abu Dhabi onboard M/V Inter Commander for the project Air diving, Hook up and Pressure Testing in ONGC at Mumbai and Tapthi.
Main Equipments used : Groove crane, CAT generator, I/R Air Compressor, Air Diving System Testing Equipments.
4. From 2006 to 2008, worked as a C/H-II Mechanic with CCC Abu Dhabi onboard CCC Pioneer - D.P Vessel for the project Cable Hydro Tight, Sub-sea cable laying and Tieing in Maersk at Qatar.
Main Equipments used : Manitowoc crane, Atlas COPCO Air Compressor, Cummins generator, Diving Equipments, Testing Equipments.
5. From 2002 to 2006, worked as a C/H-II Mechanic with NPCC Abu Dhabi onboard HLS- 2000, HEAVY LIFTING SHIP for the project Jacket, Deck Installation in ELF-Qatar, SHELL-Iran.
Main Equipments used : Clyde crane-2000 ton, Winch, Compressor, Generator, Boiler, American crane, Hydraulic Hammer, Diesel Welding Machine.
6. From 1992 to 2002, worked as a C/H-II Mechanic with NPCC Abu Dhabi onboard DLB-1000 for the project Pipeline in ELF and Maersk at Qatar.
Main Equipments used : Electrical Winch, Clyde crane, SAS Tensioner, Line up ,CAT generator, Compressor, MECO, Water maker.
7. From 1998 to 1999, worked as a Master Mechanic with NPCC Abu Dhabi onboard SEP-350, JACK UP BARGE for the project Hook up in ADMA at Abu Dhabi.
Main Equipments used : Electrical Jacking System, Winch, AMCO generator, Compressor, American crane, Appleton crane.
8. From 1995 to 1998, worked as a Mechanic with NPCC onboard DLB-750 for the project Pipeline in QGPC and ELF at Qatar.
Main Equipments used : American crane, SAS Tensioner, Manitowoc crane, MECO Winch, Generator, Compressor.
9. From 1992 to 1995, worked as a Mechanic with NPCC onboard PLB-648 for the project Pipeline in ONGC at Mumbai.
Main Equipments used : Western Gear Tensioner, SAS Line up, Manitowoc crane, Generator, Compressor Winch.
10. From 1985 to 1991, worked as a Mechanical Fitter with Cochin Shipyard, Kerala under building dock construction Maratha, Majestic, Oil Tanker for the project Building Dock in CSL Cochin at Cochin, Kerala.
Main Equipments used : Shipyard Construction Machineries, Repair Dock, Building Dock, ERD Equipments.
DECLARATION

In the view above, I request you to be kind enough to give me to serve your organization, I shall be very thankful to you. If getting a suitable chance I can join with you at any time as per your demand.
Abu-Dhabi Yours faithfully,
07.10.2010 K.K.Varghese
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4243258
Date & Time : 12th Jun 2011 11:32 AM (UTC)
IP Address : 117.207.160.89
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; yie8)
Predicted Country : India

[Guest]

Dear Sir,
I have received a message from sail.shine.com/rsp. in this message written that i dont have submit my payment details. but i have deposit my payment at SBI bank.

You have to confirm that the amount you deposited has been received by the company