NPCC Engineering Ltd Mumbai : Pipeline design Lead Engineer

[Admin]

NPCC Engineering Limited
http://www.nel-india.com

Keywords: Pipeline Engineer

Lead Discipline Engineer - Pipeline
Experience:
8 - 13 Years
Location:
Mumbai

Education:
UG - B.Tech/B.E. - Any Specialization
PG - Any PG Course - Any Specialization;Post Graduation Not Required

Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
23 Sep


Job Description
- Performs Pipeline design calculations and analyses.
- Prepares Pipeline design reports.
- Attends technical & progress meetings.
- Raises the technical queries.
- Attends design review meetings.
- Prepare Tender inputs.
- Compliance, in accordance with HSE Standard.

Desired Candidate Profile
- Graduate in Mechanical Engineering Discipline with minimum 10 years relevant experience in Design and Engineering in Oil & Gas Industry
- At least 3 years should be as Lead Discipline Engineer in Offshore Industry.
- Capability of utilizing Pipeline Engineering software. Understanding of Engineering Disciplines.
- Familiar with Pipeline International codes & standards.
- Good command of written and spoken English.
- Good Communication skills.

Company Profile
NPCC Engineering Limited, Mumbai (NEL) is a joint venture between National Petroleum Construction Company, Abu Dhabi (NPCC) and Arcadia Shipping Limited, Mumbai with majority share holding and management control by NPCC. NEL has been established in February 2007 to provide Design & Engineering services for Offshore Oil & Gas Industry in India & abroad.

NPCC is a major international (EPC) contractor, capable of providing the Offshore and Onshore Oil & Gas industry with complete Engineering, Procurement and Construction. Established in April 1973 it has executed successfully a number of onshore & offshore projects on EPC basis and engineered several oil production, compression, living-quarters, subsea pipelines & cables and topsides and installed heavy weight topsides by float-over techniques, in the last few years.

Executive Name:
Shreya Shetty

NPCC Engineering Limited
'B' Wing Bonanza, 311-324,
3rd Floor, Sahar Plaza Complex,
Kondivita, M.V. Road,
Andheri (East),
Mumbai 400 059, India
Telephone: +91-22-40390505
General Email Address: info@nel-india.com
HR Email Address: hr@nel-india.com

[Guest Poster]

dear sir,

can anybody tell me that NPCC called for an interview for the given above advertisment (openings).

[abdulpk]

From :
Mr. P.K ABDUL KADER
Panikassery Kadavil House
P.O. Chalingad, Kaipamangalam
Trissur (DT), Kerala, India
Mob: 0091-9895405159
Email: pka2005 AT hotmail.com

To : CONSTRUCTION MANAGER.

Dear Sir,
Sub : Application for the Post of DESIGN DRAUGHTS MAN
I am a Diploma holder in Mechanical Engineering ( NCVT) and working as a Design Draughtsman at Engineering Development Centre of Golden Institute of Technology & Consultant in India And I wish to apply for the suitable post in your esteemed organisation.
I have relevant experience in the mechanical and piping drawings related to Oil & Gas field. I enclosed herewith my detailed resume for your further reference. I assure that I will discharge my duties and responsibilities to the extreme satisfaction of my superiors.
Should you require any further information please do not hesitate to contact me . I look forward to hearing from You.
Thanking you, yours faithfully,
Encls: Resume (ABDUL KADER)

RESUME
Mechanical & Piping Draughtsman

PERSONAL INFORMATION
Name : P. K. ABDUL KADER
Father's Name : Kunjimarakar
Date of birth : 17.05.1967
Nationality & Religion : Indian, Muslim
Marital Status : Married
Languages known : Malayalam, English, Arabic & Hindi
Passport Details : Passport No. B 0734619
Place of Issue : Dubai
Date of Expiry : 14-04-2020

Address For Communication : Panikassery Kadavil House
P. O. Chalingad, Kaipamangalam
Trissur (DT), Kerala, India Pin: 680681
Mobile No. 0091-9895405159
E-mail : pka2005 AT hotmail.com

QUALIFICATION AND TRAINING
S S L C State Board of Examination of Kerala.
Diploma in Mechanical Engineering from LUNA Institute of Engineering Technology
Recognised by Govt. of Kerala. Irinjalakuda, Thrissur, Kerala. ( N C V T )
Diploma in Engineering Draughtsmanship Mech. & Piping ( AutoCAD & Microstation)
From Golden Institute of Technology Triprayar, Thrissur, Kerala.
Completed a Certified Course In AutoCAD 2d & 3d in ARABIAN Computer Institute
Kaipamangalam, Thrissur, Kerala.
Completed a Certified Course In Photoshop from CAD Line College of Computer
Education. Kaipamangalam, Thrissur, Kerala.
Completed a Certified Course In Computer Hardware & Installation from CAD Line
College of Computer Education. Kaipamangalam, Thrissur, Kerala.

WORK EXPERIENCE
Job Title : AutoCAD Draughtsman
BRIDS’S EYE Engineering Consultants
Kaipamangalam, Thrissur, Kerala
Responsibilities : Mechanical Draughtsman
Duration : Nov. 2000 to July 2002
Job Title : Piping Designer
Institution : Al Dhaid Consultants (MEP Project)
In Sharjah, U A E
Responsibilities : Water Supply & Drainage. Piping
Designer
Duration : Sep. 2003 to Oct. 2005
Job Title : Mechanical / Piping Draughtsman
Contactor : Asianic Engineering Corporation
Client : Relience
Project : Jamnagar Relance Refinery
Gujarath (St), India
Responsibilities : Conversion of Isometric Drawing from
General Arrangement Drawing
With generation of Bill of Materials from Piping specification
Duration : Dec. 2005 to Jun. 2006
Job Title : Mechanical/Piping Draughtsman
Institution : Golden Institute and Consultant
Triprayar, Thrissur, Kerala

Responsibilities : Mechanical/Piping Layouts, Isometrics,
P&IDs and GADs - Drafting and checking
For Coded Piping drawings (Oil and Gas)
Duration : Sep 2006 - Continuing

Nature of Duties & Work Performed
Preparation of Piping drawings (PFDs, P&IDs, Plot Plan, GADs, etc.)
Preparation of ASME pressure vessel drawings (General Layouts, and details)
Conversion of Isometric Drawing from General Arrangement Drawing.
Preparation of Equipment Layout.
Preparation of Piping layout.
Preparing As- Built Drawings, Isometric & General Arrangement Drawing. As Per Site Condition.
Piping Isometric drawings with generation of Bill of Materials from Piping specification

DECLARATION
I hereby declare that the above furnished information is true to the best of my knowledge and belief.
Place : Kerala
Date : 06/02/2010 P.K. ABDUL KADER

[prabhatmukul]

Prabhat Kumar
Mobile: +91 9998987796 ~ Ph. (Res.): 0228 – 6617968
E-Mail: prabhat.kr.jha AT gmail.com

~ PIPING DESIGN ~

PROFESSIONAL SNAPSHOT
- A keen analyst with 3.8 years of experience in Plant Layout, Piping Design, Support Design.
- Strong relationship management, communication skills with the ability to network with Project Members, Consultants, Contractors with consummate ease.
- Significant experience in Piping Engineering, Detail Engineering, Coordination, etc.
- Excellent communication, analytical and problem solving skills with the distinction of receiving appraisals and recognition for excellent performance.

COMPETENCIES RUN DOWN
- Generating Isometrics using PDS as a software, SPR for reviewing and Microstation for 2-D plot plan and platform drawings.
- Monitoring the team of modellers and Isocheckers and providing require input also handle critical layout .
- Reviewing the engineering documents prepared by consultant / principal engineering & follow up the Engineering documents from consultant.
- Overseeing development of Overall Plot Plan, Equipment Layout, Piping Material Specifications, Piping Routing Study, Vessel Nozzle Orientation and Platform Details, Plant Design Review.
- Maintaining and implementing Departmental Procedure, Quality Plan, Work Instruction, Checklist, Job Qualification to meet the requirement of ISO.

EMPLOYMENT SCAN

Since Jul’06 with Reliance Engineering Associates Pvt. Ltd., Jamnagar (Jamnagar Export Refinery Project) as Piping Engineer

Notable Highlights
- Worked as a Modeller and ISO-Checker for various units of JERP Project. Involved in equipment modelling of pumps, heat exchangers and columns.
- Prepared bulk MTO and additional MTO along with load input for civil.
- Ingeniously created stress package for stress analysis.
- Key project handled for Reliance Industries Ltd. At Jamnagar Export Refinery Project, Jamnagar.
- Responsibilities: Modelling and layout of equipments in PDS of various units of JERP. Layout of critical lines of column and pumps, MTO preparation, model review, isometrics, plot plan and cad index updating, load input to civil, IDCs, SER resolutions, yellow auditing, etc.
- Modelled the whole Deluge System for VGO Unit of JERP by frequently visiting the running refinery and taking the onsite inputs without deluge GA & its exact location.
- Worked on AutoCAD 2007 for the chilled water piping for Reliance Corporate Park, Mumbai.
- Provided field support to shut down of DHT and VGO unit of EOU Refinery by providing updated drawing as per site conditions.
- worked on as built provided by construction and updating the PDS models accordingly.
- Working on PCOs generated from operation demartment, DCN generated from process.