Bank of Baroda Recruitment 2012 www.bankofbaroda.com : PO Probationary Officer

[muthukalee]

Name of the organisation : Bank of Baroda (bankofbaroda.com)
Name of the post : Recruitment for Probationary Officer in 2012

RECRUITMENT OF -600- PROBATIONARY OFFICERS – PROJECT 2012.

Bank of Baroda invites applications for the post of Probationary Officers from Indian citizens who have taken the Common Written Examination for Probationary Officers/ Management Trainees conducted by IBPS in 2011 and have a minimum score of 125 in respect of General/OBC Category and 105 for SC/ST category out of a total score of 250 issued by IBPS.

http://www.bankofbaroda.com/recruitment.asp
http://bankofbaroda.com/download/Det...nt_PO_2012.pdf

Total No. of Vacancies : 600

SCALE OF PAY : Rs.14500 – 600 x 7 / 18700 -700 x 2 / 20100 – 800 x 7 / 25700.
AGE (AS ON 01.07.2011) : Minimum 21 years and Maximum 30 years.

EDUCATIONAL QUALIFICATION (AS ON 01.07.2011) :
A Graduate degree in any discipline from a recognized University in India OR Any equivalent qualification recognized by Central Government. AND
Candidates should be qualified in the Common Written Examination conducted by IBPS and should be holding a score card issued by IBPS for Probationary Officers/ Management Trainees in September 2011/ November 2011 with a minimum score of 125 for General/ OBC category and 105 for SC/ST category out of a total score of 250 with the following minimum cut-off in each section/ category:- AND
Should be a computer literate (proficient in MS Office Basic Applications, internet usage).

AMOUNT OF FEES / CHARGES FOR POSTAGE :-
The amount of fee to be paid is indicated below :
Category of Applicant Amount of Fees/ Charges for postage (Non-refundable)
SC/ ST/ Persons with Disability (PWD) ` 50/-
GEN/ OBC ` 200/-

MODE OF PAYMENT :-
Candidates have the option of remitting fees via ONLINE MODE or OFF-LINE MODE.
Under the On-line mode, the application form is integrated with the payment gateway and the payment process can be completed by following the instructions. The payment can be made using only Master/ Visa Debit or Credit Card by providing information as asked on the screen. On successful completion of the transaction, an e-receipt would be generated. Candidates are required to take a print of the e-receipt which will have to be produced, if called for interview.

Under the Off-line Mode, kindly take a note of the following :-
1. Take a print of 'FEE PAYMENT CHALLAN' (click here to download the Fee Payment Challan).
2. Fill in the Fee Payment Challan in a clear and legible handwriting in BLOCK LETTERS.
3. Go to the nearest Bank of Baroda Branch with the Fee Payment Challan duly filled in and pay, in Cash the appropriate Application Fee in Account No. 29040200000250 with Bandra Kurla Complex Branch, Mumbai, in favour of Bank of Baroda 'RECRUITMENT OF PROBATIONARY OFFICERS - PROJECT 2012’. Candidates may find out required branch address from our website bankofbaroda.com under option Branch Locator, select State & ‘City’ and press ‘enter’
4. Obtain the Counterfoil (Applicant's Copy) of the Fee Payment Challan duly received by the Bank with (a) Branch Name & Code Number (b) Transaction ID (c) Date of Deposit & Amount filled by the Branch Official.
5. Candidates are now ready to apply Online by re-visiting the Recruitment Page of the Bank's website and going to the sublink titled "Online APPLICATION FOR BANK OF BARODA PROBATIONARY OFFICERS' RECRUITMENT PROJECT-2012". Click on this sublink will open up the appropriate Online Application Format.
6. Carefully fill in the necessary details in the Online Application Form at the appropriate places and submit the same Online.

IMPORTANT DATES :
Website Link Open. From 21.02.2012 To 10.03.2012
Payment of fees at BOB branches. From 21.02.2012 To 10.03.2012
Last date for deposit of fees (including for candidates from far flung areas). 10.03.2012
Tentative dates for interview. April 2012

[Guest-IJT]

Name : SAMOJ KUMAR SHARMA
Email : samoj.iotep AT gmail.com
Designation / Skillset : Asst. Manager

An Application for the post of -------------------- in your esteemed enterprise.
Dear Sir/Madam,
With reference to the above-mentioned subject, I wish to apply for the post of -------------------------in your esteemed enterprise. I have Three year Diploma (FIRST CLASS HONOURS) in Mechanical Engineering from Board of Technical Education (U.P) & NACE CIP Level –I Certified Coating Inspector form NACE INTERNATIONAL USA & Level –II in coating inspection and quality control from I.I.T. Bombay, Having five-year experience in Surface preparation, Paint application, Paint failure, maintenance coating, Paint safety and paint specification, paint coating for offshore structure, chemical plant, rebar’s on Rcc structure, concrete coating and coating for underground pipelines & Hot Insulation works (Equipment, piping, vessel & exchangers), Currently I am working with M/s. I.O.T. Engineering Projects Ltd. for M/s IOCL (Panipat Refinery) Under Consultant M/s EIL (Engineers India Ltd) at PNCP panipat, project.
In the end I believe that my qualifications and experience will suffice to meet your requirement and assure you Sir, that you will feel completely satisfied with my work and performance.
Awaiting for your most favorable reply.
Thanking you,
Yours faithfully,
(Samoj Kumar Sharma)
Nace Certified Coating Inspector
Level-1 (Cer. No.20453)

Resume :
CURRICULUM VITAE
Samoj Kumar Sharma
Diploma in Mechanical Engineering (First-Class Honours)
Post applied for the discipline of : -----------------------
My Carrier Objective :
To work and grow in a challenging environment, where my career acquired skills would be best used to add value to the organization, which demand sheer hard work and responsibility and justify my potential to establish myself as a competent person and work to achieve the goal of the organization.
My Strength :
Good communication skills, extrovert, Honesty, Integrity, Sincerity, couple with my commitment, towards work from any basic strengths dedication towards my work and capable of understanding any kind of Problem & Execution work related hot insulation-blasting & painting and under ground pipelines wrapping coating.
Nature Of Job :
All type of Hot Insulation works (Equipment, piping, vessel & exchangers) and Blasting & Painting Activities related to the Coating Quality & Execution (Storage Tank, Vessels, Structural, Piping and Fitting painting etc.)
(1) Blasting and Painting of Carbon Steel Storage Tankages (Inside & outside both) for Diesel Oil Portable water & Fire water services etc.
(2) Identification of Blasted/Anchor profile Standards like (SSPC, BRITISH, and NACE & SWIDISH ISO- (SIS-05-5900-1967/ ISO-8501-1-1988) as per specifications being followed.
(3) Close Co-ordination & Discussions with Consultant to the Coating Maintenance, coating failure and other coating concerned problem.
(4) And also a brief knowledge of Coating Tests like (Pull off Test, Cross Hatch Test, NVM Test & Holiday detection Test) Refinery Colors coding for different services& temperatures.
Well Familiar Of Blasting / Anchor Profile & Painting Standard & Instruments :
i) SSPC-SP-Blasted profile USA Standard # SP-5, SP-10, SP-6, SP-7, SP-2 & SP-3.
ii) NACE-Anchor profile USA Standard # NACE-1, NACE-2, NACE-3, NACE-4.
iii) SWEDISH (SIS-05-5900-1967/ISO-8501-1-1988) Standard # SA-3, SA-2½, SA-2, SA-1
iv) BRITISH standard BS-4232 : 1967 # First quality, Second quality, and Third quality.
v) Hand and power Tool cleaning # ST-1, ST-2, ST-3 & ISO-2808, Method No 6 &10.
Knowledge Of Various Kinds Of Paint Tests And Inspections :
Holiday test, Pull off test, Tape test, Cross hatch test, Measurement of Wft & Dft, Impact test, flexibility test, Emersion test, UV light test, Salt spray test, Gloss retention test, NVM test and also know about Cathodic disbondment for U/G piping & Equipment.
Technical Qualification;
Three year Diploma in Mechanical Engineering with first division (80.01%-1ST-CLASS HONOURS-II- RANK IN INSTITUTE) from Board of technical education Lucknow (UP).
Academic Qualification;
HIGH SCHOOL passed from U.P. BOARD with first division (69.33%-I- RANK IN SCHOOL).
INTERMIDIATE passed from U.P. BOARD with first division (62.00%-V- RANK IN COLLEGE).
Additional Qualification :
- NACE CIP Level –I Certified Coating Inspector form NACE INTERNATIONAL.
- Level -II in Coating Inspection & Quality Control from, I.I.T. BOMBAY.
Computer Literacy :
- Windows XP, 98 & 2000.
- Well knowledge of MS-Office, Internet explorer, Initial knowledge of AUTO-CAD.
Professional Experience : Total 7-1/2 Years Experience
- I have worked as an Engineer/Inspector for Blasting, painting & Touch-up Painting of various Stainless steel & Carbon steel pipe, structure, support, guide, Storage tank, Vessel, different type of Equipment like Turbo Generator, Compressors, Jetty platforms and highly corrosive environmental structures.
- Supervision of Sand blasting, painting and wrapping coating, Hot Insulation of Equipments -piping under Refinery Projects and holiday detection of underground piping and also know about to the Catodic Disbondment protection of U/G-PIPE.
- I have a practical knowledge of the Primer coat paint like (Alkyd, Epoxy, High build Epoxy, Inorganic Zinc silicate, Zinc phosphate based primer etc.)-Finish coat paint like (Self priming surface tolerance high build epoxy, polyurethane).
1) Organization : M/s. I.O.T. Engineering Projects Ltd.
Owner : M/s Indian oil Corporation Ltd (Panipat Refinery)..
Project : PRAEP Project & Naptha Cracker Project, Panipat.
Designation : “Asst. Manager.”
Duration : From 05th June, 2007 to till date.
2) Organization : M/s Petron Engineering Construction Ltd.
Owner : M/s Indian oil Corporation Ltd (Gujarat Refinery).
Project : MSQU Project.
Designation : “Sr. Engineer –(A).”
Duration : From 17th June, 2005 to 04th June, 2007.
3) Organization : M/s Petron Engineering Construction Ltd.
Owner : M/s Shell Gas & Power MNC Under HCE Technimont
(Italy).
Project : Hazira Port & LNG Terminal Project.
Duration : From 3rd march, 2004 to 16th June, 2005.
4) Organization : M/s Hindalco thermal power plant Renusagar (U.P).
Project : Vocational Training.
Duration : From 20th June, 2002 to 19th July, 2002.
Duties & Responsibility:
- I have executed the work as an Engineer for Painting & Sand blasting filed in various kinds of structures, well familiar with Elcometer, Shygrometer, profile gauge, surface temperature gauge.
- Inspection of receipt abrasive (copper slag, garnet, Iron shots, & silica) mesh size, compressor pressure & Air oil test, Blasting Hopper hydro test and Shop painting by Air, Airless Spray, Conventional Spray.
- To maintain the daily records of blasting, primer up to topcoat painting reports, Humidity reports and check the Calibration of profile gauge & Elcometer as per project specification.
- Better knowledge for utilization of Man, Machine & Power.
Well knowledge of billing mode of measurement of painting & insulation executed work.
Passport Detail:

- Passport no: G 91846290.
- Date of issue: 01/03/2007.
- Date of Expiry: 28/02/2017.

Salary Expectation:
1. Current Drawn emoluments: 7.5/- lacks INR per annum.
2. Expected emoluments: ------- lacks INR per annum.
I declare that the information given above is true to the best of my knowledge.
Place: PANIPAT (Samoj Kumar Sharma)
Date: 05.07.2011 Nace Certified Coating Inspector
Level-1 (Cer. No.20453)

-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4370701
Date & Time : 14th Jul 2011 12:40 PM (UTC)
IP Address : 180.215.166.33
Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:2.0b7) Gecko/20100101 Firefox/4.0b7
Predicted Country : --