Foster Wheeler Bengal Pvt Ltd Kolkata : Piping Design PDS, Caesar II

[Admin]

Foster Wheeler Bengal Private Limited
http://www.fwc.com/
http://www.findfwc.co.uk/

Company profile:
Foster Wheeler, a multi-billion dollar global engineering contractor and licensor, is rapidly expanding its operations in Kolkata through Foster Wheeler, the Indian subsidiary of its operations à Foster Wheeler USA Corporation.

Designation : Engineer Piping

Job Description :
Experience in piping layout design utilizing 3D - PDS, flexibility analysis using Caesar II, pipe support design including location and schedule, preparation of civil loading data, preparation of piping specification / valve data sheet / material requisition, review of P & IDs, review of vendor documents, technical bid evaluation and recommendation, coordination with other disciplines, knowledge of SPR, etc.

Desired Profile
B.E / B. Tech in Mechanical Engineering
Exposure in basic / detail engineering of piping in Refinery,
Petrochemical, Chemical or related industry.

Experience:3 - 10+ years
Location : Kolkata

Contact
Mr Partha Chowdhury
Infinity Think Tank - 1
Plot A , Block - GP
Sector - V, Salt LAke City
Kolkata,west bengal,INDIA 700091

Apply online : http://www.findfwc.co.uk/fw/default.asp

To submit your resume for general consideration, please email to the specific hiring office to which you are applying.
india_staffing@fwuk.fwc.com

Keywords piping layout design, 3D - PDS, flexibility analysis, Caesar II, pipe support design, civil loading data, piping specification, valve data sheet, material requisition, P & IDs, review of vendor documents, technical bid evaluation, recommendation.

[Amul Rane]

Respected Sir,
Please go through my updated resume for your selection procedure.
Waiting for your reply.
Thanking You,
Amul A. Rane

RANE AMUL ASHOK
MUMBAI-400068.
E-mail : amul_rane AT rediffmail.com , amulrane AT yahoo.co.in , amulrane18 AT gmail.com

B.E. MECHANICAL FROM RAJIV GANDHI INSTITUTE OF TECHNOLOGY OF MUMBAI UNIVERSITY ,ANDHERI IN 2004 & COMPLETED PIPING ENGINEERING COURSE FROM IIT MUMBAI, WITH 6 YRS OF EXPERIENCE IN PIPING & PIPLINE FIELD.

WORK EXPERIENCE :
- PRESENT JOB : - [JUNE 2009 – TILL DATE]
EMPLOYER : LIBRA PROCESS TECHNOLOGIES PVT. LTD.

RESPONSIBILITIES : - PIPING ENGINEER
NATURE OF JOB :-
1) STUDYING OF P&ID AND G.A,
2) PREPARING MATERIAL REQUIREMENT,
3) ROUTING THE LINES WITH HELP OF P&ID ,
4) ISOMETRIC EXTRACTION ,
5) ODIFICATION IN THE LINES & RESOLUTION OF CLASH,
- PREVIOUS JOB : - [AUGUST 2007 – MAY 2009]
EMPLOYER : TECNIMONT ICB PVT. LTD.

RESPONSIBILITIES : - PDS PIPING DESIGNER
NATURE OF JOB :-
1) ROUTING THE LINES WITH HELP OF P&ID ,
2) ISOMETRIC EXTRACTION ,
3) MODIFICATION IN THE LINES & RESOLUTION OF CLASH,
4) ISOMETRIC CORRECTIONS ,
5) ISSUING ISOMETRICS WITH HELP OF ISO CONTROL,
6) TAKING NOZZLE REPORT
7) PREPARING MTO
PROJECTS :-
1) TASNEE (WORKED ON PDS ,PPE PLANT )
2) BOREALIS (WORKED ON PDS ,PPE PLANT)
3) GASCO ( PREPARING MTO)
4) BOCAMINA ( WORKED ON PDS ,POWER PLANT)
- PREVIOUS JOB :- [ JULY 2004 – AUGUST 2007 ]
EMPLOYER : ROLTA INDIA LIMITED

RESPONSIBILITIES :- PIPING ENGINEER
NATURE OF JOB :-
1) UNDERGONE THE TRAINING OF PDS & SMART PLANT REVIEW.
2) PDS MODELLING .
3) SUCCESSFULLY COMPLETED SMALL BORE PIPE ROUTING WITH HELP OF GENERAL ARRANGMENT DRAWINGS
4) TASK WHICH HAD BEEN PERFORMED
a) PDS MODELLING OF SNC LAVALIN PROJECT,
b) CLASH CHECKING IN PDS & SPR,
c) RESOLVING THAT CLASHES IN PDS,
d) ISOMETRIC CORRECTIONS,
e) ISOMETRIC EXTRACTIONS WITH HELP OF INTERACTIVE & BATCH BOTH.
f) TAKING BATCH PRINT OF THE ISOMETRICS.
g) INTERACTING WITH CLIENT FOR CORRECTION ON DRAWINGS
PROJECTS :-
1) ESSAR OIL
2) SNC LAVALLIN

ADDITTIONAL QUALIFICATION :
Serial No Qualification Institute Year Of Passing :
01. CERTIFICATE COURSE ON PIPING ENGINEERING IIT BOMBAY DECEMBER-2004

EDUCATIONAL QUALIFICATION :
Sr. No Qualification University/Board & Institute Year Of
Passing Class & Percentage :
01. B.E. MECHANICAL Mumbai University, RAJIV GANDHI INSTITUTE OF TECHNOLOGY 2004 1st Class, 65.28%
02. DIPLOMA MECHANICAL MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, GOVERNMENT POLYTECNIC THANE 2001 1st Class, 71.44%
03. S.S.C Mumbai Divisional Board, POORNA PRAJNA HIGH SCHOOL 1998 1st Class,79.06%

SOFTWARE HANDLED :-
- CADMATICS,
- CAEPIPE ( STRESS ANALYSIS),
- NAVI S WORK
- SPR ( SMART PLANT REVIEW )

COMPUTER COMPETENCIES :
- AUTOCAD,
- MAHARSHTRA STATE BOARD OF TECHNICAL EDUCATION,MUMBAI.

PERSONAL INFORMATION :
- DATE OF BIRTH : 1st JULY 1982.
- NATIONALITY : INDIAN.
- GENDER : MALE.
- LANGUAGES : ENGLISH, MARATHI, HINDI, GUJARATHI.
- HOBBIES : PAINTING, PLAYING FOOTBALL & CRICKET

Thanking You,
(AMUL ASHOK RANE)

[Guest]

S. Kowsick
Email : koushik.sam AT gmail.com

CAREER SUMMARY :
- 4+ years of experience in the field of Pipe Stress Analysis, and Piping Supports for Oil & Gas, and Petrochemical industry.
- Extensive experience in stress analysis and supporting of piping systems connected to columns, pump, tank, pressure vessel, air-cooled heat exchanger and centrifugal compressors.
- Hands on experience in static modules in pipe stress analysis, and supporting of lines subjected to, two phase flow (slug flow) and high seismic loads.
- Strong knowledge of ASME, API, NEMA, WRC, UKOOA and other international codes and standards.
- Holds 4 years Graduate Degree in Mechanical Engineering.
- Presently associated with PETROFAC engineering services, Chennai, India Pvt. Ltd. as Engineer-Piping.

WORK HISTORY :
- July 2007 to August 2011 - Engineer at PETROFAC engineering services, Chennai, India Pvt. Ltd
QUALIFICATIONS AND CERTIFICATIONS
- B.E. (Mechanical Engineering), Anna University, Chennai

PROJECTS WORKED :
PETROFAC
- JIHAR Stage III – Gas treatment plant ($454 Million) for HAYAN PETROLEUM CO., Syria
- ELMERK – central processing facility ($2.2 Billion) for SONATRACH, Algeria
- KOC-Effluent water injection phase-1 and Sea water injection phase-2($430 Million) for Worley parsons, Kuwait

ENGINEERING EXPERIENCE :
Performing static analysis of high critical lines which includes :
- Flare lines along with relief valves (24” diameter/310 0C).
- Heating medium line from fired heater (16” diameter/310 0C).
- High critical fire heater lines, connected to vacuum transfer line (450 0C).
- Lines connected to injection pumps, heavy oil pumps (14” diameter/ 500 bar).
- Stress analysis of tankage area in the offsite unit as per API 650.
- High critical lines (16” diameter/2400 C) connected to fin fan coolers (as per API 661).
- Heat Exchangers and reboiler lines with temperature up to 260 oC.
- Performing static analysis of lines subjected to two phase flow (slug flow), seismic loads and wind loads.
- Performing flange analysis using ASME BPVC Section III, Division 1, NC-3658, Equivalent pressure method and High strength bolting method.
- Determining loop sizes and loop location for process, flare, HP, MP and LP steam lines running on racks.
- Civil loading for entire pipe rack and other process structures.
- Vessel clip definition for columns and storage tanks.
- Preparation of constant, variable springs, rigid strut, snubber data sheets.
- Preparation of civil information drawing reflecting loads and steel requirement.
- Preparation of project specific support standard from company corporate standard.
- Developing supports for large diameter pipes (24” and above).

ACHEIVEMENTS :
- Review of supports in the construction Isometrics in the 3d model.
- Assigned as Lead Stress Engineer for LUKOIL proposal.
- Coordination with the prime office for the interface areas.
- Effectively coordinating with project engineering disciplines for accurate information exchange.
- Actively participated in interaction with compressor, pipe support and Special support vendors.
- Preparation of stress critical line list.
- Checking piping layout for accessibility, operability and easy maintenance.
- Effectively participating in internal and client model reviews.

COMPUTER PROFICIENCY :
- CAESAR II (Version 5.0, 5.1 & 5.2)
- Navisworks
- Smart Plant Review
- AutoCAD

[Unregistered]

Dear Sir,

I am a graduate mechanical engineer from a highly reputed university of Kolkata, India with 36 years experience in manufacturing, planning, procurement & logistics. I am due to complete my term with my present employer at close of 30th June this year. I know for sure that your company hires/retains services of senior technical professionals for mutual benefit. I look forward to take up a full-time matching assignment on contractual basis preferably from 1st July, 2013. It will be worth-mentioning here that I am ready to relocate and also have no problem in taking up extensive travelling for official reasons.Please find below my cv.
Kindly revert at the earliest.

Regards,
Arindam Ray

CURRICULUM VITAE :
ARINDAM RAY
E-Mail : aray AT neslengg.in / arindamray0108 AT yahoo.in

Top Level assignments in Materials Management / Purchase / Inventory Management / Commercial Operations with an organization of high repute.

Professional Synopsis :
Experience Profile :
Result driven material management professional with more than 30 years documented record of strong, decisive executive leadership in diverse industry verticals.

Core Competencies Evolved :
Material Planning
Planning & Budgetary Control Sourcing& Procurement
Vendor Management
Techno-Commercial Operations
Inventory Management
Quality Assurance
Import Substitution
MIS/ Reports
Supply Chain Management
Contract Management
Team Management

Skill Set :
Proficient in establishing policies and procedures for streamlining the activities of materials department with expertise in Material Planning, Techno-Commercial Negotiations, Scheduling and Procurement of equipments and materials. Excelled as critical thinker and adept negotiator who can apply knowledge in achievement of core organizational objectives and significant cost savings. Possess excellent interpersonal, analytical, troubleshooting and team building skills with proven ability in establishing quality systems / procedures and planning / managing resources.

Education :
- PG Diploma in Business and Industrial Management
- B.E (Mechanical) from Jadavpur University, Kolkata in 1970.

Other Courses :
Certificate in Material Management from CII in 1979.
Certificate in Working Capital & Inventory Management from Administrative Staff College, Hyderabad in 1994.

Membership :
- Member of Indian Institute of Materials Management, Kolkata chapter.
- Member of SCM & Logistics Committee of Confederation Of Indian Industry [CII] – Eastern Region

Employment Details :
Aug’96- Nicco Engg. Services Limited, Kolkata General Manager
Till date
Jan’91- Assambrook Limited, Kolkata Senior Manager-Materials
Jul’96
Nov’88- Tata Refractories Limited Dy. Manager-Purchase
DEC’90
Apr’84 TIL LIMITED, Kolkata Asst. Manager-Purchase
NOV’88
Oct’82- Usha Telehoist Limited Asst. Manager-Stores
APR’84 Kolkata & Purchase
Sep’80- Shriram Bearings Limited Material Officer
Sep’82 Kolkata
Jan’71- GRSE Limited GET/Asst. Engineer/Jr. Manager
Aug’80 Kolkata

CORE COMPETENCIES :
Sourcing & Procurement :
- Developing and implementing key procurement strategies / purchase schedules and ensuring that these strategies / schedules are aligned with organizational objectives.
- Formulating budgets and Cash flow for timely procurement of Raw Materials, Spares, Consumables and all other goods and services to ensure smooth production and execution of projects.
- Purchase of capital goods, spares for utilities and capital items, fuel like coal, diesel, furnace oil, raw materials and consumables for production.
Supplier Relationship Management :
- Developing long-term partnerships with suppliers; negotiating contracts and managing day-to-day supplier performance to ensure meeting of service, cost, delivery and quality norms.
- Conducting suppliers’ audits on a regular basis to measure supplier performance against contractual standards and implement necessary corrective actions.
Vendor Development :
- Liaising and negotiating on rate with vendors for timely procurement of materials.
- Making Purchase Agreements with vendors.
- Making Strategic Partnership and Reviewing & selecting appropriate vendors for materials and providing technical evaluations of materials.
Materials Management & Control :
- Managing stores operations, ensuring optimum inventory levels to achieve maximum cost savings without hampering the production process.
- Developing effective material management systems & procedures for inventory items and carrying out stock analysis for better inventory control.
- Conducting routine inspection & stock audits to ensure reconciliation of physical stock at the warehouse; carrying out disposal of surplus / obsolete stock and NPA.
Cost Planning & Management :
- Spearheading cost reduction initiatives consolidating tasks, eliminating non-value-added processes & complete re-engineering of processes and systems.
- Analyzing existing processes and re-designing the same for enhancing operational efficacy and achieving maximum cost savings; spearheading value engineering initiatives.
- Making effective use of cost analysis tools in support of strategic sourcing process, procurement costs, cost reduction metrics and bottom line performance indicators.

Personal Details :
Date of Birth : 01st August 1949
Joining time : 1 month
Current CTC : Rs 12 Lac per annum
Expected CTC : Negotiable

[subhendubera123@gmail.com]

I am Subhendu Sekhar bera. I am Civil & structural draughtsman. i want draughtsman job.my resume sending.if you kindly allow me for an interview. i am very pleased.