www.larsentoubro.com Larsen & Toubro Bellary : Piping Engineer Fabrication erection

[Admin]

Larsen & Toubro limited
http://www.lntecc.com
http://www.larsentoubro.com

Keywords: pipe, pipline, engineer,

Company Profile
Larsen & Toubro Limited is India's largest engineering and construction conglomerate with additional interests in IT and electrical business. A strong, customer-focussed approach and the constant quest for top-class quality have enabled the Company to attain and sustain leadership position for over six decades.

L&T has pioneered spectacular achievements in Indian industry. Many of the engineering projects executed by L&T have set new benchmarks in terms of scale, sophistication and speed. So do many buildings, highways, bridges and civil structures around the country which are widely regarded as landmarks.

In line with its policy of aligning capabilities to meet emerging trends, L&T initiated a mega-transformation process internally. This will ensure that the Company rapidly emerges as a knowledge-based, premium conglomerate with a global reach.

L&T believes that progress must necessarily be achieved in harmony with the environment. A commitment to community welfare and environmental protection constitute an integral part of the corporate vision.

Engineer - Piping
Experience:
3 - 7 Years
Location:
Bellary
Compensation:
Salary and benefits will be commensurate with qualifications and experience, and will not be a constraint for deserving candidates.
Education:
UG - B.Tech/B.E. - Mechanical

PG - Post Graduation Not Required
Industry Type:
Construction/ Engineering/Cement/Metals
Functional Area:
Other
Posted Date:
20 Sep

Job Description
Candidate should have experience in the following areas:
Fabrication and erection of all types of pipeline in process industries, including different diameters of water, gas, oil and lubricants pipeline.
Material verification and fit up inspection as per engineering requirement.
Pickling, oil flushing, painting of pipelines.
Testing of pipelines as per engineering requirements.
Planning of day to day activities & execution
Familiar with quality and safety standards.

Desired Candidate Profile
Candidate should be a graduate in
Mechanical engineering with 3-7 years experience or a Diploma in Mechanical Engineering with 9-12 years experience.
Experience in industries such as Refinery, Fertilizer and Oil would be an added advantage.
Should be willing to relocate to Karnataka.

Executive Name:
MMHW Talent Acquisition

Address:
Larsen & Toubro limited
Mount poonamallee Road,
Manapakkam
Chennai,Tamil Nadu,INDIA 600089

Telephone:
91-044-22526247

Apply online here: http://www.lntecc.com/HR/OnlineLink.asp
Job applicantions must be submitted ONLY on careers page: http://careers.larsentoubro.com

REGISTERED OFFICE
L&T House, Ballard Estate Mumbai – 400 001
Tel: 022-67525656
Fax: 022-55525858
ccd@Lth.Ltindia.com

HEADQUARTERS
Mount Poonamallee Road, Manapakkam
P.B.No.979, Chennai – 600 089
Tel: 044-22526000, 22528000
Fax: 044-2249 3317

HOLCK-LARSEN CENTRE
Mount Poonamallee Road
Manapakkam
P.B.No.979, Chennai – 600 089
Tel: 044-22526568
Fax: 044-22526065
HHL-Centre@LNTECC.com

ENGINEERING, DESIGN & RESEARCH CENTRES
EDRC - Chennai
Mount Poonamallee Road, Manapakkam
P.B.No.979, Chennai – 600 089
Tel: 044-2 2528000, 22528080
Fax: 044-22493888
skanappan@LNTECC.com
ksn@LNTECC.com
Nkpi@lntecc.com
droy@LNTECC.com
kn@LNTECC.com
dmaheswaran@LNTECC.com

EDRC - Kolkata
DLF IT Park,
Premises # 08, Block-AF, 2nd floor, Tower-C,
Newtown, Rajarhat,
Kolkata 700156
Tel: 033-44008700,
Fax: 033-44005385
REGIONAL OFFICES
Ahmedabad
1009, Sakar II, 10th Floor, Near Ellis Bridge
Ashram Road, P.O.Box No.11016
Ahmedabad – 380 006.
Tel: 079-55525200
Fax: 079-26576211, 26575217
pcm@lntecc.com
Bangalore
19, Kumara Krupa Road, Bangalore – 560 001
Tel: 080-40100000
Fax: 080-22256127
lnm@lntecc.com

Chennai
No.10, Club House Road
Anna Salai, Chennai – 600 002
Tel: 044-2846 0046
Fax: 044-2846 0060
brs@lntecc.com

Delhi
211, Okhla Industrial Estate, Phase III
New Delhi – 110 020
Tel: 011-41295600
Fax: 011-41615125/26
rma@lntecc.com

Hyderabad
LARSEN & TOUBRO LIMITED
ECC Division
Cyber Gateway
B-Block, Wing No. 1
1st Floor
Madhapur, Hyderabad - 500 081
Tel: 040-23122431, 23687100
Fax: 040-23122441
anilchugh@lntecc.com

Kolkata
Park Plaza, 2nd Floor, 71, Park Street
P.B.No. 9010, Kolkata – 700 016
Tel: 033-22492700, 22494901
Fax: 033-22499489 / 22499705
ta@lntecc.com

Mumbai
Landmark ‘A’, II & III Floor
Suren Road, off. Andheri-Kurla Road
Andheri (East), Mumbai – 400 093
Tel: 022-66965200
Fax: 022-56965345
dks@LNTECC.com

WORKS
Pithampur
TLT Works, Plot No.158-B, Sector III, Pithampur,
Dhar District, Madhya Pradesh – 454 774
Tel: 07292-256317, 256431 Fax: 07292-256316
sg-pith@LNTECC.com

Pondichery
TLT Works, Mailam Road, Sedarapet, Pondichery - 605 111
Tel: 0413-2672500 Fax: 0413-2677727
asa@LNTECC.com

Kancheepuram
167, Neervalur Village Kancheepuram 631 502
Tel: 04112-27248383, 93 & 94
Fax: 04112-27248383&290
kasokkumar@LNTECC.com

[maheshlal]

RESUME
MAHESHLAL LAWRENCE
Varuvilakathu veedu
Maruthummoodu
Pothencode P.O
Thiruvanathapuram
Pin: 695584
Ph: 0471 2718203
Mob: 09745445541
Email: lmaheshlal AT gmail.com
OBJECTIVE
Looking forward a better placement in the field of pipe fitter/fabricator.
WORK EXPERIENCE
- Lamperll Energy Ltd. U.A.E
October 2004 – Present
During the period we are doing all the refurbishment work in oil and gas, Jack up Rigs and Land Rigs in offshore and yard facility.
It means Piping work (low and high pressure), Hydro testing and commissioning of pipelines, overhauling and installation of different type valves.
The job has given me adequate experience in various technical job likes Gas cutting, Brazing, Welding, Operation of different types machineries like profile cutting machine, hydraulic a
Father Name: Lawrence. A
Nationality: Indian.
Gender: Male.
Marital Status: Married.
Date of Birth: 22/05/1975.
Passport no: G8164659.
Issued date: 28/05/2008.
Date of expiry: 27/05/2018.
Declaration
I hereby solemnly declare that the details
Mentioned above are true to the best knowledge and belief.

Thiruvanathapuram Maheshlal Lawrence

[farooq f]

FAROOQ .F Email : farooq.f15 AT gmail.com

FAROOQ.F
S/o F.Khader Vali
Court Mohalla,
H.no 19/36, Miller pet,
Bellary 583101,
Ph : 9241118599
OBJECTIVE :
To be a part of an organization which harbours talent, encourages innovation, provides challenging tasks, great carrier & growth. To best implement available skills through performance.
PERSONAL ATTRIBUTES :
Adaptability to different surroundings, team spirit, punctuality, learnabality, willing to travel, good interpersonal skills, high level of commitment.
ACADEMIC QUALIFICATION : Diploma in Mechanical Engineering
ACADEMIC RECORDS :
Examination Passed University/Board Institute Month and Year of passing Percentage
SSLC S.E.E.B.Karnataka. Wardlaw High School, Bellary, Karnataka. April 1997 45.12%
Diploma in Mechanical B.T.E, Bangalore, Karnataka. S.G.Polytechnic, Bellary, Karnataka. 1st year-2001 June
2nd year-2002 June
3rd year-2003 July 46.33%
54.58%
59.36
Project Undertaken : “Fabrication of Vortex Tube”
Vortex Tubes are small in size and they produce hot as well as cold air. They may be used at place where both hot and cold are simultaneously required. Temperature as low as –10o can be obtained without any difficulty and hence it is useful in industries where compressed air is readily available.
Computer Proficiency : Programming languages: C.
Operating System : Win 98, MS-DOS.
Applications : AutoCAD 14/2000, MS- Office.

Working Experience :
1. Worked as a Supervisor in the Thermo treat engineer “ VVT Ltd.”, at Industrial area Hosur
Road Bommasandra, Bangalore from July 2005 – October 2006.
2. Working as a Shift in charge in Sponge Iron Plant HCMPL Bellary Pvt. Ltd, from December
2006 to till Date.
Current Responsibilities :
- Worked as shift in charge in individual shifts.
- Supervision of line activities like operating management, shop floor management and
Co-ordination with maintenance departments.
- Organize & co ordinate the production in the shift with minimum down time under norms matching to cost & quality.
- Effective planning of material & efficient utilization.
- Monitoring & controlling parameters of Sponge Iron for getting good product.
- Supporting the quality person by detecting & eliminating defects during processing the material.
- Ensuring discipline, quality, safety & housekeeping on shop floor during the shifts.
- Ensuring optimum utilization of machine & manpower.
Personal Details :
Name : Farooq.F
Father’s Name : Mr. Khadar Vali
Date of Birth : 15-12-1980
Sex : Male
Marital Status : Married
Languages Known : English, Kannada, Hindi and Telugu.
Hobbies : Playing Volleyball, Listening Music, Reading books
I hereby declare that the above written particulars are best of my knowledge and belief.
Place : Bellary (Farooq.F)

[Guest]

SRINIVASAN.R
kesev2win AT gmail.com
_____________________________________________________________________________________
CAREER OBJECTIVE :

Seeking a position to utilize my skills and abilities that offers professional growth while being resourceful, innovative and flexible to the organization needs.
EDUCATION QUALIFICATION :
COURSE
INSTITUTION PERCENTAGE
OF MARKS YEAR OF
PASSING
B.E(EEE) Mahendra Institute of Technology
MALLASAMUDRAM
82%
2011
HSC (XII)
Government Higher secondary school,
Balasamudram
75%
2007
SSLC
Government higher secondary school,
Balasamudram 82.5%
2005
SOFTWARE PROFICIENCY :
- Languages : C, C++
- Operating Systems : Windows XP
- Web Designing : HTML
ACHIEVEMENTS :
- Won 1st prize in Project Presentation-2010 contest conducted by JJ ENGINEERING COLLEGE.
- Presented a paper in National level technical symposium conducted by MAHA COLLEGE OF ENGINEERING
- Awarded by Education council for clearing the State level Talent exam-2004.
AREA OF INTEREST :
- Embedded system
- Electrical machines
PERSONAL SKILLS :
- Good analytical skills.
- Creativity.
- Team worker.
EXTRA CURRICULAR :
- Received Governor Award for the best Scout candidate of the year-2005.
- Participated in district level Kabaadi competition held in Nehru stadium-2007
- In college level I won a shot –put championship
- I have participated in cricket &basketball matches in college level.
MINI PROJECTS DONE :
ENERGY SAVER :
The objective of this project is to save the energy according to the number of persons in the room. For an example let us consider the auditorium or home. We save the energy depends upon the number of audience in the auditorium. This project makes the automatic energy saver in auditorium or home.
The fans & light in the auditorium are controlled depends upon the number of audience present in auditorium. This project is designed with two set of IR transmitter and receiver, signal conditioning unit, micro controller along and driver circuit with relays. IR transmitter is the one type of LED which emits infrared rays generally called IR transmitter. One important point is that both IR transmitter and receiver will be placed in the straight line to each other.
We have built the working prototype model of this concept and presented in JJ college technical symposium and got the first prize.
MAIN PROJECT DONE :
WIRELESS VEHICLE(BUS) INFORMATION SYSTEM USING “RFID” TECHNOLOGY :
This project is about to inform the vehicle(bus) information to the passenger whether the bus had gone from the bus stand or not. If the bus is already gone also the passenger can enquiry about that bus using touch switch present in the bus stand. If a person enquire about a bus means it will be displayed in the LCD screen and also will be announcing the information in the speaker also. The passenger can also enquire about the bus in bus stop also. In the bus stop there will be a buzzer when the bus comes near the bus stop(about 30m)the buzzer automatically gives a sound to indentify the bus coming. Our project is mainly useful for the blind and illiterate people.

[Guest]

I am shiva sending my updated resume

[Guest]

E-mail : mrinal_hazra AT rediffmail.com

Mrinal Kanti Hazra
(Design Engineer, 7.6 Years Experience, Diploma in Mechanical Engineering)

________________________________________________________________________________________
Objective :
I want to work in a challenging and highly competitive environment where I would be able to explore my abilities and hence contribute to the best of myself.
Professional Experience :
Having an expensive experience of over 7.6 years in Piping, Ducting, and Cable Design & Engineering
1 Designation :-Designer
Axsys Technologies Ltd. Kolkata.
Sep 2007 – till date
Project :
1. Anchor Handling Tug Supply Vessel (H192),
Client : Drydocks World-Singapore Pte. Ltd., Singapore.(On side-3 months)
2. A.S.W. Corvette(Anti Submarine War Ship of Indian Navy)
Client : Garden Reach Shipbuilders, Kolkata.(On side-40 months)
3. Anchor Handling Tug Supply Vessel (H192),
Client : Drydocks World-Singapore Pte. Ltd., Singapore.(On side- 4 months)
4. Anchor Handling Tug Supply Vessel
Client : Saigon Shipyard co. Ltd., Vietnam.(In house-2 months)
Role & Responsibility :
- 3D Pipe,Ventilation,Cable & Equipment Supporting Structure Modeling of Engine Room Compartment.
- 3D Pipe ,Ventilation, Cable & Equipment Supporting Structure Modeling of D.G. Room.
- 3D Pipe,Ventilation,Cable & Equipment Supporting Structure Modeling of Pump Room.
- 3D Pipe,Ventilation,Cable & Equipment Supporting Structure Modeling of Accommodation Zone.
- Preparation of Piping Bill of material.
- Preparation of Equipment Layout Drawings.
- Preparation of Composite Layout Drawings.
- Preparation of Piping Isometric Drawing.
- Preparation of Pipe support Drawing.
- Preparation of Pipe Production Drawing.
- Preparation of Pipe spool drawing for Production.
- Estimation of piping length, flange, Gasket & piping fittings in each system.
- Preparation of System Drawing.
- Guides to junior level in our team.
2. GARDEN REACH SHIP BUILDERS & ENGINEERS LTD.

Technician Apprentice Trainee (from May’ 2006 to May’ 2007)
Ship Design throw Auto- CAD & Tribon.
3. M/s. NEZONE STRIPS LIMITED at Dankuni, Hooghly , near Kolkata ,

Production Supervisor (from April-2004 to May-2006) in Precession Tube Mill on Production & Quality Department. Also an experienced in C.D.W (Cold Draw Work) Plant project (i.e. Fabrication, Errection, M/c. Foundation, Piling .etc ) in the same firm.
Computer Knowledge : M.S.Word, M.S.Office, Auto CAD, Tribon M3, M.S.Visio.
Training Attended :
- Certified course on Auto CAD & Microsoft Office from a recognized Computers Center, Bishnupur.
- One year Apprentice Training from Garden Reach Shipbuilders & engineers Limited, kolkata.
Educational Qualification :
- Diploma in Mechanical Engineering (74.8%), W.B.S.C.T.E, 2003)
- Passed H.S (Science) Examination under W.B.C.H.S.E. in the year of 1998.

[Guest]

Dcs-plc all type of instrument commission

[Guest]

RESUME
SUDIP KR.PRADHAN
E-mail ID : sudipkr_pradhan AT yahoo.co.in
Excellent Skills in AutoCAD 2012,Casting Design,
DIPLOMA IN MECHANICAL ENGINEERING &Fabricated Items. Drawing Development.
Career Objective : To pursue a career with an organization where Work is Worship & Efficiency is the
Yardstick to measure the performance of an individual & where I will be able to play a key role within the
sphere of my work.
Skill Sets :
- Excellent working knowledge on AutoCAD 2012. Machine drawing, Drive Shaft, Equipment drawing , Conversant with AutoCAD 2012 & I.S 210-93,1030-98,2062-06,1875-92,6631-72,7504-95,318-81,733-83 for Design.
- Having concept Gear Case Assy Design Calculation with Proper Raw Material as per IS/BS.
- Having working experience on AutoCAD2002 to AutoCAD 2012 platform.
- Weight Calculation of Fabricated Items.
- Having knowledge on detailing of part design, assembling of part design.
- Exposure to Engineering Supervision at work shop during various stage of Manufacture.
- Ability to understand detailed engineering drawing.
- Concept of Computer Fundamentals.
- Total working knowledge of MS Word, Excel, Power Point, Internet Operations-Surfing, Email & other related matters
Work Experience :
Present Status :
Name of the Organization Designation Area of Work Duration
Traco Enterprises
9/2 Metro Towers 9th Floor
1,Ho-Chi Minh Sarani Kol-71 Senior Autocad Draughtsman
Mechanical Factory(Design Dept.) &
Head Office-033 22882575 April 2007
Till Now.
Company Profile :
An ISO 9001-2000 Manufacturing company which has always quality standards driven by customer requirements. Manufacturer of Gear Case Assy,Shaft,Gear,Coupling etc.required by Indian Railway duly approved by R.D.S.O Lucknow. & Wilfits Spare Parts of Heavy Earthmoving Machineries.
KOMATSU MODEL (HYDRAULIC EXCAVATORS,WHEEL DOZER,MOTOR GRADER,
DOZER(D50A-15,D80A-12),JCB MODEL ETC.

Responsibility :
- Drafting Handling Product Drawing.
- Preparing Plant Layout
- Drafting Gear Case related Drawings.
- Preparing Isometric orthographic Drawing.
- Preparing Bill of Material list including Weight Calculation

Past Experience :
Name of the Organization Designation Area of Work Duration
CFI Technologies Pvt. Ltd.
4B Little Russel Street , Kol-71 Draughtsman Head office (Design Dept.)
May 2006 to
March. 2007
Company Profile :
CFIt have been involved as Engineering Consultant for several projects covering products like Ammonium Nitrate, Calcium Nitrate, Sulphuric Acid, Sulphate Plants etc.CFIt is also covering Basic Engineering Package, Detail Engineering Package, carrying out Process reviews & Plant Audits.
Responsibility :
- Preparing Equipment Layout.
- Preparing Plant Layout.
- Preparing Detail Fabrication Drawings.
- Preparing Bill of Material list.
- Preparing support Details.
Name of the Organization Designation Area of Work Duration
Shrihari Engineering Pvt.Ltd.49, Block-B, New Alipore, Kol-53 Draughtsman
Design Department (H.O) March 2005 to
May 2006

Company Profile :
An ISO 9001-2000 Manufacturing company which has always quality standards driven by customer requirements. Manufacturer of Track Roller Assy,Hydraulik Tank Assy etc.
Responsibility :
- Having working experience on Plant Layout Drawing
- Engaged new product development.
- Preparing drawing as per customer as well as international standard.
- Preparing self drawing for customer approval.
- Preparing material list & calculating the weight of material

Name of the Organization Designation Area of Work Duration
Essel Kitchenware (P) Ltd.
4 Fairle Place Kolkata-700001
Draughtsman (Trainee)
. H.O & Factory 8th January2004 to
22th.Feb.2005
Company Profile :
An ISO 9001-2000 Spare Parts of Manufacturer & Exporter of EPS,HIPS and PP disposable dinnerware and tableware, including drinking straws,Eatons,Its brand of lightweight disposable table ware ranges from dishes,bowls,trays,compartmentalized plates, glasses, containers and lids.
Responsibility :
- Engaged in preparation drawings of spares for Model as per customer requirements.
- Involvement as supervisor of the product as per drawing various stage of Manufacture
Name of the Organization Designation Area of Work Duration
Hindustan Aeronautics Ltd.
Barrackpore,Kolkata-700120 Trainee Factory 3th September2002 to
2th September 2003
Company Profile :
An ISO 9001-2000 Helicopter manufacturing company. Manufacturer of Cheeta,Chetak Helicopters
Name of the Organization Designation Area of Work Duration
Agri-Mechanical Water Resources Development Trainee The Office of the Assistant Engg.(A-M) 11th.August2001 to 10th. August2002
Company Profile :
Maintenance of diesel pump sets which was used to deliver water in the Agricultural land. It is an organization of Government of West Bengal under Water Resources Development
Educational Qualification :
Name of the Examination passed Name of the Board of the Examination Year of Passing Division or Class
Madhyamik Examination West Bengal Board of Secondary Education 1992 2nd Division
Higher Secondary West Bengal Council of Higher Secondary Education 1994 Pass
B.SC Vidyasagar University 1997 Pass
Diploma in Mechanical Engineering West Bengal State Council of Technical Education 2000 1st Division
Other Qualification :
Name of the Course Name of the Board of the Examination Year of Passing Duration Grade
AutoCAD 2002 with Auto-lisp Kit Center Belgharia Kolkata-56 2003 6 months A
Project work during the course of Diploma in Mechanical Engineering :
Project on Spur Gear & Square Threaded Screw Jack Cutting on Machine Shop.
Industrial Training : During the course of diploma I have visited TATA METALIKS & gathered some valuable experience. As a part of curriculum training I was associated as vocational trainee in Kharagpur for one month.
Declaration :
I hereby declare that aforesaid statements are true to the best of my knowledge and belief.

Date :
Place : Kolkata ______________
(Sudip Kr.Pradhan)