Orion Engineering Sharjah : Piping Engineer

[Admin]

Orion Engineering
http://www.orioneng.com

Keywords: EPC , CAESAR II, PDMS, PDS, AUTOCAD, VPRM / MM Package , TERRA MODEL software.. British Standard BS, ASME, IBR, EJMA, AWWA, ANSI, API, NFPA and IS standards and codes

Company Profile
Orion Engineering Services Ltd is a specialist employment business first established in Inverness in 1987 and having offices all over the world. To know more about us please visit our website: www.orioneng.com.

Principal Engineer Piping
Experience: 18 - 25 Years
Location: Sharjah
Compensation: U.S Dollars 1,00,000 & above
Education: UG - B.Tech/B.E. - Mechanical
PG - Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Other
Posted Date: 15 Sep

Job Description
Lead a team of engineers and designers in carrying out detailed engineering work for large sized projects assuming entire responsibility for conceptual and detailed design (Concept, Front End or Basic, Material, Stress Analysis, Layout Engineering, Coordination of 3D modeling) and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A) Review the ITB (Invitation To Bid) documents submitted in the proposals stage, issue inquiry requisitions, review techno-commercial vendor offers, prepare equipment, material and man-hour estimates.

B) Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&IDâs), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client.

C) Verify and conceptualize the most optimum work route. Identify a clear scope of work/supply and accordingly plan/schedule the engineering activities and manpower resource. Identify and quantity total number of engineering deliverables, man-hour allocation, format of delivery, time schedules and other requirements for execution of the work.

D) Coordinate with projects and planning on project time schedules, establish target completion dates, ensure target dates are achieved.

E) Develop Manpower charts and schedules, recommend, assign and distribute manpower for the execution of engineering activities within budgeted project man-hours. Recommend cost effective measures to reduce overall manpower costs. Assign personnel to the various activities; layout, material, stress and 3D works.

F) Supervise the preparation of stress analysis reports in CAESAR II software and Modeling works in PDS, ensure that isometrics are updated as required. Monitor the identification of stress factors and layout feasibility, resolve design irregularities. Provide stress and piping loads to civil engineering group, coordinate on technical issues as required.

G) Monitor the preparation of conceptual layouts and designs, obtain inputs from other engineering disciplines through the âwant listâ document, i.e. mechanical data sheets, foundation sizing, equipment layout, instrument specifications and other necessary data. Guide the preparation of pipe wall thickness calculations and Reinforcement Pad (RP) calculations.

H) Direct and provide guidance in the preparation and evaluation of plot plans, engineering drawings and technical documents issued for Internal Design Checks (IDCâs) and the integration of other engineering discipline data inputs. Prepare technical document requirements for equipment specifications.

I) Direct the preparation of technical inquiry requests (Inquiry Requisitions) to vendors, participate in the technical evaluation of vendor bid offers. Direct and provide guidance in the Technical Bid Evaluations (TBE), review vendor drawings and documents. Supervise the review of design calculations, ensure vendor equipment specifications meet with client equipment specifications and are within budgeted costs.

J) Direct and monitor Material Take Off (MTO) activities, identify irregularities and shortfalls, take corrective action as required.

K) Administer the preparation of Purchase Requisitions for the procurement of equipment and materials. Review vendor quality plans, ensure vendor equipmentâs compatibility and compliance with the scope of client specifications. Coordinate with procurement, ascertain expedite of materials and equipment to site.

L) Monitor the issuance of engineering deliverables, supervise the preparation of IFDâs âIssued for Designâ and IFCâs, âIssued for Constructionâ documents encompassing the support standard document, plot plans, locations plans, piping plans, isometrics, material requirements and other related plans and documents.

M) Lead the development and issuance of engineering deliverables .i.e. isometrics to site for construction, interface and provide clarification and technical support to construction and commissioning personnel. Administer the preparation of the final âAs Builtâ layouts and documents.

N) Interface and regularly meet with client and vendor representatives, conduct internal staff meetings, ensure the progress of project in accordance to schedule, allotted man hours and budgeted costs. Coordinate with projects and planning departments on schedule related issues. Update TDR progress reports through the use of PETROCEPT software.

O) Participate in meetings with client, vendors and other discipline engineers, clarify and ensure vendor specifications meet with client requirements in a cost effective manner.

P) Participate in HAZOP meeting with client and representatives of other engineering disciplines.

Q) Ensure compliance with Companyâs ISO Quality procedures. Coordinate Internal and Client audit requests, facilitate audit procedures of engineering systems within the department.

R) Interface and provide clarification and guidance and technical support to construction sites and commissioning engineers, provide startup assistance as required.

S) Participate in employee performance evaluations, establish performance criteria, identify employee strengths and weaknesses, recommend training and development requirements.

T) Provides support and assistance to direct supervisor on technical and non-technical issues.

U) Perform related duties as and when directed by Direct Supervisor.

Address:
Not Mentioned

Email Address:
jyothi.girish@orioneng.com

Telephone:
Not Mentioned

Reference ID:
52923

[Guest-IJT]

Name : SATHURAGREESAN
Email : sathuragreesan AT gmail.com
Designation / Skillset : QA/QC ENGINEER PIPING
RESUME

Resume :
To Pursue a responsible and Challenging position in an organization that will enable me to utilize and develop my analytical and interpersonal skills and give me an opportunity to grow with time and build a successful career.

1. About 2 YEARS Experience in QA/QC ENGINEERING in NPCIL (Nuclear Power Plant-Kudankulam, Tamilnadu) Equipment, Welding, piping, Test pack preparation & NDT.
2. About 4 month experience in QA/QC ENGINEERING in ONGC (MHN PGC Platform piping L&T Hazira manufacturing complex surat) Equipment, Welding, piping, Test pack preparation & NDT.
3. Working knowledge of various national and International codes & standard like ASME Sec II A,B &C,V,VIII, IX, ANSI, ASME B 31.3&B31.1,31.4,31.8 Standards.
4. Working knowledge about NDT Test like Radio graphic, Ultrasonic Testing, Dye Penetrate, Magnetic particle test, Hardness, Hydrostatic Test, PWHT etc, and also can prepare WPS, arrange PQR, and prepare different construction and Inspection method statements.
5. Gained while work with organization engaged field, Construction, Nuclear power plant turnkey basis, offering commitment and Interpretation skill in the X-Ray & Radiography film. Willing to work anywhere in the world
ASNT – NDT - (LEVEL – II) IN.

- Ultrasonic Testing
- Radiography Testing
- Magnetic Particle Testing
- Dye Penetrate Testing
- DEGREE in Mechanical Engineering (BE) from Anna University Chennai, Tamilnadu, In June2009 With 65% Marks.
- DIPLOMA in Mechanical Engineering (DME) from State board of Technical Education, Tamilnadu, In April 2006With 68 % Marks.

M/s Sakthi Engineering Works in KoodanKulam - NPCIL Project.
Engaged with Fabrication and Installation of Storage oil tanks, Piping, Structural and Equipment for Oil and Gas industry.
Worked as a Mechanical QA/QC Engineer in Quality Assurance Dept. from June2009 to Feb 2011.
- Worked with Larson & Turbo Ltd. For Process & Power piping an KudanKulam Nuclear Power Project in Tamil Nadu.
- We are constructed those PROCESS PIPING According to ASME B 31.1, ASME B 31.3, ASME 31.4,ASME 31.8 Standards.
- We done the welder Qualification according to ASME Sec. IX, Sec. V. ASME Sec IIA,B &C,V,VIII, IX, ANSI codes.
- Involved in QA/QC, Piping Projects & Documentation of Projects at K.K.N.P.P Co-ordination with Inspection and Certifying Agencies Such as GLIS.
- Involved in Fit-up, Weld Visual Inspection, NDT Co-ordination,
- Assisting in Preparation of QC Plan & NDT Plan.
- Assisting in preparation of Welding Procedure Specification, Procedure Qualification Record and Organizing Welder Qualification Test.
- Organizing Welder Qualification Test Review welder/welding operator certifications and issuance
- Witnessing Various NDT Methods.
- Site Drawings verification
- Monitoring the production welding, Before Start, during, after welding to assure that it continues to produce satisfactory results.
- Preparation, Review and Witness of PWHT and its procedures
- Preparation, Review and Witness of Hardness test and its procedures and reports
- Generating Documents for the Inspected Work at Various Operational Stages
- Involved in Preparing Scope of the Work, Projects and Inspection Report jobs.
- Inspection of welding consumables-verification, visual inspection, Storage and Handling.
- Inspection of welding equipments calibration verifications.
- Familiar with MS-Excel, MS-Word
- Familiar with Auto CAD 2007,
- Familiar with PRO-E 3.0
- ANSYS

I declare that the information and facts stated here are true and correct to the best of my Knowledge.

Place : MUMBAI.
Date :13/07/2011
(s.sathuragreesan)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4370054
Date & Time : 14th Jul 2011 9:27 AM (UTC)
IP Address : 120.62.38.8
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)
Predicted Country : India