www.mrpltd.biz Madras Radiators And Pressings Ltd Coimbatore : CNC Programer, Design Engineer

[mariammal]

Madras Radiators And Pressings Ltd Coimbatore : CNC Programer, Design Engineer
Company Name : Madras Radiators And Pressings Ltd ( mrpltd.biz )
Company Location : Coimbatore
Designation (of vacancy) : CNC Programer, Design Engineer
Company Website : http://www.mrpltd.biz/index.html

Job Description, Candidate Profile, Company Profile, Company Address :
Job Description :
Design Engineers :
1 .Proficiency in development of sheet metal components for CNC Turret Punching & Press Brake
2. Develop a team to meet the needs of customer
3. Knowledge in ISO will be added advantage

Company Profile :
Madras Radiators and Pressings Ltd. was promoted by Late Shri. A.P. Madhavan (apm) who was a renowned catalyst, entrepreneur and a great visionary. It was started in the year 1963 ,to cater the sheet metal component requirements of original equipment manufacturers in the automotive and tractor industries. Over the last four decades, the company has grown considerably and today has become a leading manufacturer of sheet metal components for automotive giants in India. Madras Radiators and Pressings Ltd., is part of the “apm United Group” of companies.
As the company grew, manufacturing capability was added to cater the needs of market which shows the growth of Telecoms, Petroleum, Electrical Equipment and Agricultural Equipment Manufacturing Industries. Due to this sourcing of sheet metal component has gone to new peaks. To cater the needs ,a separate division MADRAS RADIATORS AND PRESSINGS LTD.(PLANT - IV) was started in the year 2007 .
Our group’s activities include manufacturing of Radiators, Heat Exchangers, Oil Coolers, Propeller Shafts, Sheet Metal Components, Hydraulic Brakes, Hot Forged Components and other Components for Automobile Industries.

THE MANAGEMENT :
apm United Group is headed by Shri. Sunil Haridass who is a renowned entrepreneur in the Engineering Industry in India. MRPL is being managed by the efficient, experienced Board of Directors and by Professional Team of Executives.

GROUP COMPANIES :
apm United Group consists of following companies, in addition to the number of firms in various field of business other than engineering :
Universal Heat Exchangers Limited – Coimbatore
Uni Drivelines (P) Limited – Coimbatore
Madras Radiators and Pressings Limited – Chennai (Plant - I)
Madras Radiators and Pressings Limited (Radiator Division ) – Coimbatore (Plant - II)
Madras Radiators and Pressings Limited (Brakes Division ) – Coimbatore (Plant - III)
Bill Forge (P) Limited – Bengaluru

Company Address :
Mr. P. Jinachandran
Manager (O)
Madras Radiators and Pressings Ltd. (Plant - IV)
SF No. 98, Palladam Road
Othakkalmandapam
Coimbatore – 641 032

More Information about this submission and submitter :
Submission ID : 5195222
Date & Time : 30th Jan 2012 6:09 AM (UTC)
IP Address : 58.68.71.202
Browser info : Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
Predicted Country : India

[Guest]

R.THAMARAIKANNAN. B.E. MBA
E-mail : thams_r AT rediffmail.com
rthams AT yahoo.co.in
CAREER OBJECTIVES :
With an aim of showing myself distinguished from others, want to put all my sincerity, dedication and hard work in a team and play my part to helping my organization to meet its glorious objectives.
ACADEMIC INFORMATION :

- Master of Business Administration
Secured-70 % ( First Class )
R.V.S College of arts and management-Coimbatore

- Bachelor of Engineering
Secured 71 % ( First Class )
Annai Terasa College of Engineering – Cuddalore
- Diploma in mechanical Engineering
Secured 91 % (First Class with Honors- Dept.Topper)
Nanjappa Institute of Technology – Coimbatore
- Diploma in – NDT-level 3
BITS Institute – Coimbatore
ELECTIVES :
- Human resource management
- Marketing Management
- Automobile Engineering
- Production Planning and Control.
- Plant Layout
- Non-Traditional machining techniques.
TOTAL EXPERIENCE : 10 YEARS
PROFESSIONAL EXPERIENCE :
Company Product Dept Position
Sri Ganesh Engg,
Sidco,Coimbatore
(Nov2012- till date) Sheet metal products Production & Admin Works manager
S.A.ENGINEERING INDIA PVT LTD (oct 2010- nov-2012) Own product : Eicher genset,sub-contractor for Gmmco,Greaves cotton,Caterpillar, southern agro & etc Production & Administration ISO9001-2008 system coordinator Works manager
METAFOLD ENGG PVT LTD
(June 2008 - oct 2010) Own product : Storage solution products like Industrial storage Racks,Mobile Racks,mould Storage & Cantilever system, Mezzanine & etc
Design & Development
Senior Officer
CRAFTSMAN AUTOMATION PVT LTD
(August 2004
-May 2008) Own product :Surface grinding m/c,storage system,cranes,invertors Subcontractor: for LMW, stork,stovac,Mitshubishi,
G.E(German)
Design & Development & Process Planning
Senior Engineer
SUPER SPRINGS
(July2002-July
2004) LMW,CATERPILLAR,sub cont. (sheet metal division) Development, process
Planning & control. Production Engineer
SAE : Sri Ganesh Engineering, Coimbatore
SAIPL : S.A.Engineering India Pvt Ltd, Bangalore
MEPL : M/s Metafold Engg Pvt Ltd, Pune
CAPL : M/s Craftsman Automation pvt ltd. Coimbatore(Dt).
SUPER SPRINGS : M/s Super sprigs pvt ltd.kurumba palayam.coimbatore. Sheet metal unit.
DUTIES & RESPONSIBILITIES :
In MEPL & CAPL
- Production planning.
- Raw material control.
- Sales and design activities for material storage products.
- Laser programming.
- Product development
- Process capability studies
- Studying the feasibility of Design, operation and performance of the mechanism Components.
- Supervise and inspect the installation, modification and commissioning of newly designed mechanical system and construction sites.
- Investigate mechanical failures and take the suitable preventive action.
EXPERIENCE IN SHEET METALS;
- Good knowledge in component development & Quotation.
- Programming knowledge in laser cutting machine.(Bystronic).
- Programming knowledge in laser cutting machine.(Amada).
- Programming knowledge turret punch press.(Tantus 256H),Euromac
- Programming knowledge turret punch press.(Tantus 256H)
- Knowledge in all kinds of welding.
- Knowledge in CNC press brake(Trimans,Darley) & also in tool design.
- Knowledge in NC press brake(Amada).
- Knowledge in conventional press brakes & folding m/c (Godrej).
- Knowledge in universal hydraulic press(Godrej) & also in tool design.
- Good knowledge in Production & planning.
- Knowledge in powder coating (7 tank process).
- Knowledge in ISO/TS 16949,FMEA, Statistical quality control(knowledge in all clauses)- Certified.
SOFTWARE SKILLS :
- Working skills in all MS-Office packages.
- Very good knowledge in AUTO CAD.
- Very good knowledge in 3D AUTO CAD – Inventor series 10
- Knowledge in pro-E, Solid edge & solid works
- HI CAD (For sheet metal development)
PROFESSIONAL ACHIEVEMENTS :

IN SHEET METAL (DESIGN & DEVELOPMENT) :
- L & T- petrol pump cover (Developed in craftsman).
- L & T- Electrical panel doors (Developed in craftsman).
- GALAXY- cnc m/c frame-MIDAS 10 (Bangalore).
- Shanthi gears- cnc m/c frame-(for unit 3. kurumba palayam).
- LPT-Electrical panel box – developed in sspl.
- LECS-panel boxes (carding panel display cover).
- Painting booth for SIGMA (Hero Honda – Bangalore project).
- Painting booth for SIGMA (TVS - Hosur).
- Special mould rack design up to 2.5 tons with Auto Locking System
- Special Purpose Fabric Storage Rack Design
- Design of acoustic Enclosures and DG enclosures
OTER THAN SHEET METAL :
- RAIL ARRANGEMENT FOR 60”TOPS FOR PRESSING CLIPS
- Housing arrangements developed for metallic machines
- TWS machine brackets developed for MARK-4 card.
- Painting booth for SIGMA ( Hero Honda – bangalore project).
- Non-return closing valve developed for LC-300A-card.
- Developed and implemented successfully a waste collection duct for the LC-300A-card.
- 16% weight reduction in Aluminum segment through design alteration.
- Tool & die design for the wire cutting machine.
FIELD OF KNOWLEDGES :
- Design & Development Of Products.
- ISO-9001-2008,six sigma,TS-16949
- Knowledge in FEA, FMEA,PPAP,TPM,PPC
- Marketing.
- Production & Administration
- Quality Assurance with product development
DECLARATION :
I solemnly declare that all the information furnished above is true to the best of my knowledge and belief.
Station : Coimbatore
Date :
Yours truly,

(R.THAMARAIKANNAN)

[Guest]

i want a good job

[Guest]

i want a good job

[Guest]

dear sir,
i have 16 years experience in sheet metal field (shearing, punching, bending and programming) i can take measurement for all panel board and swithbox's. if ur factory have any chance pls mail me. my mail id kmnathank AT yahoo.com .
thanking you.

[Unregistered]

Can you please post your industry profile?