Resume : Steel Plant Mechancial Maintenance Engineer

[krishnadubey79]

Krishna Kumar Dubey.
Email ID : krishnadubey79 AT gmail.com
kkd03 AT rediffmail.com

Objective :- To be the leader of the team standing behind the machines to run the machine at maximum efficiency with lowest cost and downtime.

Educational Qualification :- (1)Diploma in Mechanical Engineering from Govt.
Polytechinic Bhuj(kutch-Gujrat).
(2)Computers from LCC Gandhidham in MS Word. Excel,
Powerpoint, Internet, etc,
(3)AMIE in continuation Part-A cleared Part-B in continuation.

Expertise field :- Mechanical Maintenance
TOTAL YEARS OF EXPERIENCE :- 11 (ELEVEN)YEARS
SECTOR OF WORKING :-IN STEEL PLANTS COLD ROLLING MILLS & HOT ROLLING
MILLS CONTINIOUS GALVANIZING LINE WITH
MANUFACTURING SPIRAL AND LONGITUDINAL SAW
PIPES OF MILD STEEL AND

Experience on types of machines in Cold Rolling and Continuous :Galvanizing plants.
- Coil Car
- Leveller
- Entry & Exit tension reel
- 4Hi thickness reducing Mill
- Cellar covering all hydraulic system for Low and High pressure for Mill
- Pay off reel
- Coil joining welder machine
- Tension rolls and Deflector rolls
- Furnace for annealing (capacity 30MT)
- Pot for Galvanizing
- 4Hi skin pass mill
- Accumulator (for coil change )
- Recoiler

100% project work for 35 Mt/Hr billet RE-Heating furnace :
Experience on types of machines in Pipe Plant :
- Coil Car / for coil shifting & loading
- Decoiler assembly / Pay off reel
- Pinch roll and leveller
- Cross ID seam welding machine
- Continuous Edge Milling
- Three roll bending / Forming Mill
- OD cross seam welding machine
- Welding Stations for ID & OD of the pipe
- Expander for internal stress removal of the welded pipes
- Hydrotester and End Chamfering
- RT, UT Machines and conveyors for pipes and coil.
- EOT cranes from 5Mt to 400Mt
- .
PRESENT JOB :
COMPANY’S NAME :-MAN INDUSTRIES LTD. (MAN SAW PIPES) (Anjar-Kutch).
INTRODUCTION :- The company certified with ISO, OHASAS is approved for
API,5L,2B Spiral and L-Saw pipes is a leading Manufacturer in private and Govt. sectors all over the world for natural gas, petroleum and water lines of Mild steel Pipes from dia 18” to 80”,.
Designation :- Asst. Manager.
Period :- September 2010 till Date
Nature of Work
- All types of Hydraulics
- All types of Pneumatics
- All types of Mechanical Engineering
Responsibility :
- Working independently in the spiral -2 plant & handing my team for required preventive and breakdowns, trouble shooting.
- Planning and modifications for reducing Breakdowns.
- For proper documentations of maintenance related works and spares management.
- Making proper correspondence with tool room.
- Proper housekeeping of the area of working.

COMPANY’S NAME :- Uttam Galva Steels ltd. (khopoli) MH.
INTRODUCTION :- Collaboration with R-cellar(Steel king Laxmi Nivas Mittal), having 4Hi, 6Hi, 20Hi Cold rolling mills, CGL line, One in Asia of Super Galvanizing line, Color Coding line, Cut to length and Corrugations.
Designation : Junior Manager
Period : Jan 2009 till September 2010.
Nature of Work :
- Maintenance and trouble shooting of Hydraulic circuit and parts, also Precision hydraulics as servo valves and pressure transducers.
- Electro-mechanical maintenance
- Pneumatics system maintenance
- Maintenance of all types of mechanical parts.
Responsibility :
- Working as a shift incharge and handing my team for required preventive and breakdown of the auto- mechanical, mechanical and hydraulic maintenance of all machines and parts of Cold rolling mills and Pipe Plants.
- Planning and modifications for reducing Breakdowns
- For proper documentations of maintenance related works and spares management.
- Making proper correspondence with tool room.
- Proper housekeeping of the area of working.

Achievements. :
- Worked and completed with successful audit, on the new introduced TPM project of the plant as the Team Leader for improvement of the conditions of the equipments of mill and CGL plant with proper documentation and implementation.
COMPANY’S NAME :- INDIAN STEELCORPORATION LTD. (KUTCH) . INTRODUCTION:- Indian Steel is a joint venture of Ruchi – Mitsui (Japan), manufacturing of Cold rolled Galvanized and Cold Rolled Cold Annealed Sheets.
Designation : Senior Engineer
Period :November 06’ to Dec 08’
Responsibility :
- Working as a shift incharge and handing my team for required preventive and breakdown of the auto- mechanical, mechanical and hydraulic maintenance of all machines and parts of Cold rolling mills and Pipe Plants.
- Planning and modifications for reducing Breakdowns
- For proper documentations of maintenance related works and spares management.
- Making proper correspondence with tool room.
Proper housekeeping of the area of working.
Achievements :
Solved the problem of frequent chain breakage of accumulator by process analysis of Continious Galvanizing Line.

COMPANY :-WELSPUN GUJRAT STHAL ROHREN LTD. (ANJAR) Kutch, Guj.
INTRODUCTION :- One of the multinational Welspun group of Companies Thecompany certified with ISO, OHASAS is approved for API,5L,2B Spiral and L-Saw pipes is a leading Manufacturer in private and Govt. sectors all over the world for natural gas, petroleum and water lines of Mild steel Pipes from dia 18” to 80”, and ERW pipes of dia 6”and 16”.
Designation : Engineer
Period : March 04’ to November 06’
NATURE OF WORK :
PROJECTS :
- Worked in project stage of the company for its L - H SAW (longitudinal and helical submerg arc welding )plant for erection and commissioning of the machines (From entry line – Mill – to finishing area).
- For overhauling of Hydraulic pumps (fixed displacement & pressure compensated)of all types, Valves, actuators etc and piping of hydraulic circuits and commissioning of the same.
- For overhauling of all Pneumatic actuators, valves etc.
- For overhauling of all types of gearboxes(planetary&inline) , bearings, and machine parts and all mechanical related jobs of erection, assembly and commissioning.
- For modification as per requirement related to operational or preventive maintenance and machine structural parts. Etc. .
- Worked for total erection and commissioning of EOT Cranes for erection commissioning and load testing.
- For erections of machines as per drawing on its place.

MAINTENANCE :
- Working as a shift in charge and handing my team for required preventive and breakdown of 4Hi Mill and Continuous Galvanizing Line.
- Planning and modifications for reducing Breakdowns.
- For proper documentations of maintenance related works and spares management.
- Making proper correspondence with tool room.
- Proper housekeeping of the plant.
ACHIEVEMENT :-
- Successfully completed the erection of ID and OD cross seam welder machines which was new technology introduced for pipe plant for increasing production and reducing coil joint time.
- Erection and commissioning of Expander machine form hydraulic side.
- Preparation of all spares for maintenance of expander and welder machines.

COMPANY :- PSL LTD (Punj Sons Ltd. One of the Lyod Punj group)
(Gandhidham)
INTRODUCTION :-Unit of pipe manufacturing division . PSL is the first and largest manufactures of Spiral pipes. The company is a ISO, OHASAS certified and API – 5L, 2B, 5CT approved company also having Zinc, Cement, Asphalt Coating plants to meet different sectors.The company also manufactures Spiral mills for such plants.
Designation :– Junior Engineer
Period - : Jan 01’ to March04’
RESPONSIBILITY :
- Working as a shift Engineer and handling the breakdowns of the machines.
- Preventive maintenance of the plant as per schedule
- Correspondence with the tool room
- Log book and other document updating as per instructions by seniors.

Personnel details :
Full Name :- Krishna Kumar Dubey
Father’s Name :- Jagdish Prasad Dubey
Martial Status :- Married
Present CTC :- 4,80,000(PER ANNUM)
EXPECTED CTC :- NEGOTIABLE.

It is strongly committed that the above particulars submitted by me is true to best of my knowledge.

KRISHNA DUBEY

[Guest]

Cover Letter

I am submitting herewith my resume for your perusal and consideration for the suitable post as in your organization.

Review of my credentials will indicate that I have B.TECH. (Mechanical Engineering) specialized skills achieved via rich and cross-functional project exposure.

I am an innovative thinker, who believes in applying analysis and creativity to problem solving. I am a self-motivated and diligent individual who is able to adapt to constantly changing environments and situations. My core competencies include Subject Knowledge, Strong Interpersonal Skills, Effective Communication and Leadership Skills.

Driven by passion and competence, I am confident of making visible contribution to your company’s growth.

A tour through my enclosed resume shall take you through the details, and I am confident, in my credentials you would find a perfect fit for the said organization.

I'd appreciate the chance to meet with you in person to discuss as to how I could be a vital part of your organization.
Thanks for spending your vital time.

Curriculum vitae
AWADHESH PRASAD
E-mail : awadheshprasad30 AT gmail.com

OBJECTIVE :
A career that is challenging and interesting. A job that gives me opportunities to work at the leading edge technology, to learn and to innovate & to feel the satisfaction of success.

EXPERIENCE :
Organization : M/S BHUSHAN STEEL LTD. Meramandali, Orissa
Designation : Assistant Manager.
Duration : Presently I am working as Assistant Manager in Blast furnace Mechanical Maintenance department of 1681M3 Blast Furnace (DANIELI CORUS Technology).

Total Year of Experience : 04.8 Years.
Responsibility & Duties :
- Responsible for erection of technological structures and equipments of B.F proper, Cast House, Stove, G.C.P, S.G.P, & Hydraulic system.
- Responsible for erection of tuyers, tuyers cooler, cooling plate, blowpipe.
- Preparation of detailed action plan to achieve target date.
- Execution of jobs with stipulated time frame, cost, and quality.
- Planning of manpower, commissioning spares, running spares, infrastructure development for commissioning of B.F & to smooth run.
- Co-ordination with consultants (i.e. D.C, MECON, & Bharat), contractor & supplier.
- Follow up with purchase department, their storage at site and proper use.
- Ensure safety of personnel and equipments.

Career Achievements :
- Through in Mechanical Engineering, good project management and good mechanical maintenance practice.
- Commissioning1681 M3 blast Furnace.
- Commissioning of PAUL WURTH BELL LESS TOP charging system.
- Commissioning of all hydraulic system of blast furnace area : Bell less top charging system, bleeder valve, mud gun & drill machine, and stoves, GCP, SGP and Google Valves, Filter Press Building,
- Commissioning of Centralize lubrication system of Bell Less Top Charging System, Stove valves.
- Mechanical maintenance of all hydraulic system of blast furnace area : bell less top charging system, bleeder valve, mud gun & drill machine, and stoves, GCP ,RS Element, Google valves, Filter press Building.
- Maintenance of equipment like cranes, gear boxes, trouble shooting of Blast Furnace, Associated equipment etc.
- Mechanical Maintenance of Centrifugal pumps of Main pump house, Vertical pump up to six stage of GCP pump house.
- Presently working as shift in charge in Blast furnace .

EDUCATIONAL QUALIFICATION :
Degree University Institution Years Percentageeeeege
B.TECH. (Mechanical) Uttar Pradesh Technical University, Lucknow (U.P.) Hindustan College Of Science & Tech. Mathura. 2008 63
10+2 B.I.E.C (Patna) Bhgwanpur inter college ,bhgwanpur Siwan (Bihar) 2002 54
10th B.S.E,B ( Patna) High School nautan Siwan (Bihar) 1999 64

SOFTWARE SKILLS :
Operating Systems : Windows 2000/XP. , MS office

TRAINING :
1. Training in offsite Maint. Department done at N.T.P.C. Tanda Ambedkar Nagar. In which visited and study all the activity including water reservoir, pump station, canal.
2. Training in T.P.S. department done at INDIAN OIL CORPORATION LIMITED MATHURA REFINERY In which visited and study the generation of electricity by steam power plant and gas power plant.

PROJECT :
TO GENERATE ELECTRICITY BY COMPRESSED AIR.
In which study and prepared models of system by which electricity is generated on application compressed air on impulse turbine blades and turbine shaft is coupled by dynamo.

NAME : AWADHESH PRASAD
Date of Birth : 05/02/1984
Marital status : Single.
Languages known : English, Hindi.
Hobbies : Playing cricket, watching news and reading newspaper.
Permanent Address : Dist.-Siwan (Bihar).

Place : Angul. (Orissa).
Date : 5-2-2013 (AWADHESH PRASAD)

[Guest]

SANDIP VERMA
- EMAIL ID – mech_san007 AT rediffmail.com, mec.san007 AT gmail.com

MECHANICAL ENGINEER

Objective :
To work for company that brings out the best in me and also provides the scope for personal and professional growth.

WORKING EXPERIENCE : 3 years
1. Presently working in integrated steel plant in Pelletization Plant Project (0.6 mtpa) at SHYAM SEL AND POWER LIMITED ,(SHYAM GROUP) ,jamuria, burdwan. as Asst Engineer mechanical ,From nov2012 to till date.
2. Worked in integrated steel plant in Dri 350 tpd unit at SUPER SMELTERS LIMITED jamuria, super shakti (SAI GROUP) as Asst Engineer mechanical. From Aug,2010 to Oct, 2012.
3. Worked as a service engg in classic elevators (india) limited,new delhi. From feb .2010 to july 2010.

RESPONSIBILITY : SHIFT INCHARGE , MECHANICAL
Chief Task Handled
- Planning and execution of preventive maintenance, breakdown maintenance and planned shutdown maintenance activitity.
- Preventive and breakdown maintenance of plant and machinery
- Dust extraction system.(erection,commissioning and maintenance).
- Allingment of motors.
- Utility system of plant.
- Positoning of equipment as per engg drawings.
- Grease system
- Actuators and control valve breakdown maintenance
- Lubrication system of entire unit.

VOCATIONAL T RAINING :
Vocational Training at Usha martin ltd ,Ranchi in ropery section, le-4 and dutch stuch work furnace .patenting process.

PROFFESIONAL QUALIFICATION :
- Degree in mechanical engg from seemanta engg college ,orissa under bput ,Rourkela, IN THE YEAR 2009.
ACADMIC QUALIFICATION
- Mamtriculation from Kendriya vidyalaya(CBSE,NEW DELHI,hinoo,Ranchi in the year 2003.
- Intermediate from sm college,(BIEC,PATNA) in the year ,2005

Extra Curricular Activities :
- Participated in three state level camps of bharat scout and guides conducted by S.E Railway .

Personal Information
Name : Sandip Verma.
Gender : male
Date of Birth : 4th April 1987
Permanent Address : Po-chutia, Dist-Ranchi.
Marital Status : single
Languages Known : English, Hindi,Bengali
Hobbies : singing and listening songs.
Nationality : Indian
PRESENT CTC- 2.64 L PA

I hereby declare that the information furnished above is true to the best of my knowledge and belief.

PLACE :
SIGNAUTURE
DATE : SANDIP VERMA

[Unregistered]

Dear Sir
I am…
Diploma in Mech Engineering having experience in quality control department of helical and longitudinal submerged arc welded mild steel pipes exposure in are radiography & magnetic particle technique familiar with API - 5L ,IS....etc. specification & overall shop floor activities.
As I come to know that some vacancies are lying vacant in your esteemed organization for the post of NDT Personnel. Therefore I am submitting my candidates for the above post. This is my faith that I can prove my level best service with my good experience and working efficiency in contribution. So, please consider my candidate for the post.

Thanking you

Enclosure : Resume

Date.........
Place........ Jalil Sheikh

RESUME
JALIL SHEIKH
Mail Id; jalil_sheikh786 AT yahoo.com, jalil_sheikh AT rediffmail.com

CARRIER OBJECTIVE :
Want to make career in an Esteem Organization where I can enhance my skill and strength in conjunction with company goals and objectives and to achieve higher position by targeting higher goals in near future.

TOTAL WORK EXPERIENCE :8 YEARS

TECHNICAL QUALIFICATION :
Diploma in Mechanical Engineering from Veshanov Polytechnic, Indore (M.P.) in the year 2010.

ACADEMIC QUALIFICATION :
- High School from sent loysis Hr. Sec. School indore (M.P. Board) in the year 1998.
- Intermediate from Mother Teresa Hr. Sec. School indore (M.P. Board) in the year 2000.
- B.sc. from DAVV Indore (M.P.) in the year 2004.

PROFESSIONAL QUALIFICATION :
- ASNT Level II in Radiography Testing (RT) from Delhi in 2005

PROFESSIONAL EXPERIENCE :
- March 2004-March 2011 Man Industries (I) Ltd., Pithampur as Engineer QA/QC.

MAN INDUSTRIES (I) LTD., PITHAMPUR
Designation :- Engineer (QA/QC) in SAW Pipe Div.

COMPANY PROFILE :
Man Industries manufacture Longitudinal Submerged Arc Welded (LSAW) Line Pipes of various sizes and in conformance with various specifications to meet the growing Global demand of high pressure, cross-country pipeline owners and operators. The LSAW Line Pipes are manufactured in a Diameter range from 16” to 60” in strict conformance to the general and customized specifications of clients of various sectors such as Oil, Gas, Petrochemicals, Fertilizers and Dredging. All the Line Pipe manufacturing mills of Man Industries possess valid licenses to use API Monogram and also possess various customized approvals from reputed client’s world wide. Man Industries ensures utmost quality in all the products that it manufactures. In order to ensure a quality product, the company performs various tests and inspections that start right from the analysis of raw materials till the completion of the product. The Quality Testing procedures of the plant complies to National and International standards. Our various testing methods such as X-Ray, Chemical and Mechanical testing, Hydrostatic testing, Continuous Automated Ultrasound testing, and destructive and non-destructive physical and chemical testing ensures a quality product. In addition to the conventional testing, we also carry out selective testing to ensure product of high quality.As a testimony to this fact, Man Industries has achieved various quality certifications such as API, ISO-9001, ISO-14001, and ISO-18001. These certifications have helped the company establish a strong foot-hold globally and have empowered the company to compete with various other brands of international repute.
Job Profile : Work experience in following field like,
DUTIES AND RESPONSIBILITIES;
1. Coordination of disciplines and other department for the assigned area.
2. Responsible and controlling that the site work is done according to engineer roles and QC procedures and specification.
3. Reporting Manpower requirement for the assigned area to the general formen, supervisor and engineer.
4. Preparing, planning and check the erection work sequence.
5. Technical Assistance and support during as his assignment at the project and solving any problems appear with the other departments to enure continuity of the area to final target date.
6. Manage and lead the site forman and charge hand.
7. Control of the last rev. dwg’s and documents and ensuring of distributing it to the site formen.
8. Ensuring complietion of as-built documents for any modification or field change at site.
9. Monitoring the daily activities and progressas per the agreed schedule.
10.Following up punch list. Test packs clearing and reinstatement activities.
Radiography&FluoroscopyTesting :-
LOF,LOP, Cluster porosity, Crack, Pinhole, Bead off, u/c Slag etc.
Final Inspection :-
Dimension & visual defect, Diameter,Thickness, Bead off, Bead hide, Baval Angle, Profile, Ovality, Straightness, flatness, Squarness end root face, etc
.Raw material :- Visual Testing, Wide diagonal, Chamber, Thickness, Dent, Lamination. Etc.

PROFESSIONAL EXPERIENCE :
March 2011 to till date D&H Secheron as Sr. Engineer QA/QC.
D&H SECHERON ELECTRODES PVT. LTD. (SAVER ROAD) INDORE
Designation :- Sr. Engineer (QA/QC) .
COMPANY PROFILE :
It is an ISO 9001-2000 CO. & Manufacture of full range Welding electrodes, coroder flux cored wire and also manufacture of wear resistant plate, pipe, bend etc. and also rebuild of the tyre, roller shell, table liner and pinch rolls of steel plant Roller of cement plant.
Job Profile : work experience in following field like,
1. Service Welding jobs- NDT
2. Process Inspection – S.W. Jobs
3. Stage wise Inspection of fabrication Jobs.
4. Final inspection of Jobs.
5. Q.C. 3rd party Coordination.
6. Layout of jobs.
7. Inspection Checked Documentation.
8. Running Jobs Street wise check Without any Inspection Request.
9. Layout And Fit up.

PERSONAL DATA :
Father’s Name ; Mr.Aminuddin Shieikhs
Date of Birth : 15 Feb 1981
Sex : Male
Marital Status : Married
Nationality : Indian
Languages Known : Hindi, English
I hereby declare that information I have mentioned here is true to the best of my knowledge.

Place : INDORE
Date

[Unregistered]

I have completed b.tech for mechanical engg.
And one year job experience brahmaputra metalics limited ranchi