www.hp.gov.in HPPSC Recruitment 2012 Himachal Pradesh Public Service Commission : Veterinary, Horticulture Development Officer

Closed Thread
Results 1 to 3 of 3
  1. Post Count Number #1
    Freelancer
    Join Date
    August 18th, 2010
    Location
    India
    Posts
    16,237

    www.hp.gov.in HPPSC Recruitment 2012 Himachal Pradesh Public Service Commission : Veterinary, Horticulture Development Officer

    Name of the organisation : Himachal Pradesh Public Service Commission HPPSC (hp.gov.in)
    Name of the post : Recruitment for Veterinary, Horticulture Development Officer in 2012

    Applications are invited by 05-03-2012 from the citizens of India for the following post(s) in different Departments of Himachal Pradesh, either by Online Mode or by Offline Mode. Applications received after last date(s) will be rejected straightway.

    http://www.hp.gov.in/hppsc/page/Notifications.aspx
    http://www.hp.gov.in/hppsc/file.axd?...%2FAdvt.XI.pdf

    ITEM NO.I (A) : Department of Technical Education, Vocational & Industrial Training, H.P.
    Name of the Post :- Lecturer in Mechanical Engineering, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 10 posts

    ITEM NO.I (B)
    Name of the Post :- Lecturer in Automobile Engineering, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 03 UR Posts

    ITEM NO.I (C)
    Name of the Post :- Lecturer in Information Technology, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 02 UR Posts

    ITEM NO.I (D)
    ame of the Post :- Lecturer in Instrumentation Engineering, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 03 UR Posts

    ITEM NO.I (E)
    Name of the Post :- Lecturer in Electrical Engineering, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 15 Posts

    ITEM NO.I (F)
    Name of the Post :- Lecturer in Electronics & Tele-Communication Engineering, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 17 Posts

    ITEM NO.I (G)
    Name of the Post :- Lecturer in Civil Engineering, Class-I (Gazetted) (On Contract Basis)
    Number of posts : 15 Posts

    ITEM NO.II DEPARTMENT OF PUBLIC WORKS, H.P.
    Name of the Post :- Assistant Engineer (Civil) , Class-I (Gazetted) (On Contract Basis)
    Number of posts : 01 Gen

    ITEM NO. III Department of Agriculture, H.P.
    Name of the Post :- Agriculture Development Officer, Class-I, (Gazetted) (On contract Basis)
    Number of post(s) :-16 Posts

    ITEM No. IV DEPARTMENT OF HORTICULTURE
    Name of the Post : Horticulture Development Officer, Class-I (Gazetted ) (On Contract Basis)
    Number of Posts : 32 Posts

    ITEM NO.V : DEPARTMENT OF ANIMAL HUSBANDRY
    Name of the Post :- Veterinary Officer, Class-I, (Gazetted) (On Contract Basis)
    Number of post(s) :- 27 Posts

    Candidates applying online are required to pay a fee of Rs. 250/ for General/ General Physical Handicapped/ Hearing Impaired/ and WFF of H.P., (Rs.63/- for S.C./S.T./OBC of H.P.) by cash at any branch of Punjab National Bank, through a challan generated through the above website and its transaction number, branch code and date of receipt are required to be entered/ feeded in the fee details link.

    Before start filling up on Online Application, a candidate must have his/her photograph and signature duly scanned in the .jpg format in such a manner that each file should not exceed 40 KB each.

  2. Post Count Number #2
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    Name : MANAS RANJAN SAHOO
    Email : manas.mech123 AT gmail.com
    Designation / Skillset : site engineer,Orientation, alignment and Fit up checking, inspection of welding, preheating and stress relieving as per drawing and field quality plan..
    - years of exp : 2 years(b tech ,mechanical) in boiler erection and commissioning.
    Currently working with …
    Organization : Power Mech projects ltd(2*660mw,N.T.P.C,BARH)
    Duration : Nov 2009 – Till date
    Designation : Site Engineer –

    Resume :
    CAREER OBJECTIVE :
    - To provide all the efforts for the organization and to convert its goals into achievements with best of my capabilities.
    WORK EXPERIENCE :
    - Total years of exp : 2 years
    Currently working with …
    Organization : Power Mech projects ltd(2*660mw,N.T.P.C,BARH)
    Duration : Nov 2009 – Till date
    Designation : Site Engineer –
    AREA OF EXPERIENCE AND RESPONSIBILITIES…
    Currently working in Ground Assembly of pressure part components 0f boiler
    like header to term tubes, different stages of L.T.R.H coils, economiser coils, fin joint of water wall panels,crown plates.
    Worked in erection of structural and pressure parts like columns ,bracings, beams, suspensions, headers, water wall panels, coils
    - Daily and monthly planning and achieving the target by effective utilization of manpower, tools and other resources.
    - Manage relations with Customer, Company & Contractors.
    - Monitoring of incoming material movement as per plan
    - Execute technical activities like Orientation, alignment and Fit up checking, inspection of welding, preheating and stress relieving as per drawing and field quality plan.
    - Protocol certification
    - Ensure proper safety precaution in work area.
    Previously worked as lecturer in mechanical engg dept in Samanta Chandrasekhar institute of technology ,Koraput from august 2009 to November 2009.
    ACADEMIC QUALIFICATIONS :`
    - Completed Bachelor of Technology in MECHANICAL ENGINEERING from Ghanashyam Hemalata Institute of Technology and Management ,
    Puri affiliated to Biju Pattanaik University of Technology, Rourkela (Orissa) with C.G.P.A 7.01 in 2009.
    - +2 (Orissa Board) in 2004 from K.A.MAHAVIDYALAYA, KANPUR with 63% marks.
    - 10th (Orissa Board) in 2002 from A.N.HIGH SCHOOL, NARASINGHPUR with 73% marks
    DEGREE PROJECT AND SEMINAR :
    - Completed SYSTEM DESIGN PROJECT ON WORKING MODEL OF THERMAL POWER PLANT, which shows the function of basic parts of a power plant like boiler, turbine, condensor and cooling tower.
    - Implemented different machining processes for MANUFACTURING OF HAND INJECTION MOULD at CTTC ,Bhubaneswar.
    - Completed project on MANUFACTURING OF SPUR GEAR at H.A.L ,Koraput.
    - Presented a seminar on HYDROGEN CAR.
    ...TRAINING…………………………………………………………………………… ……
    - Training on VISUAL INSPECTION OF WELDING(A.S.N.T , LEVEL -II) conducted by BHEL
    - Completed certificate course of 1 months duration in AUTOCAD from CENTRAL TOOL ROOM AND TRAINING CENTRE, Bhubaneswar .
    - One month in plant training at CTTC, BBSR from 15.5.2007 to 14.6.2007.
    - One month vacational training at HAL, Engine Division, Koraput from ` 26.05.2008 to 24.06.2008.

    DECLARATION :
    The above statement are true to the best of my knowledge and belief.
    Place : PATNA MANAS RANJAN SAHOO
    -------------------------------------------------------
    More Information about this submission and submitter :-
    ___________________________________________________
    Submission ID : 4353453
    Date & Time : 10th Jul 2011 8:42 AM (UTC)
    IP Address : 27.48.40.22
    Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:5.0) Gecko/20100101 Firefox/5.0
    Predicted Country : --

  3. Post Count Number #3
    Guest Poster
    Join Date
    August 14th, 2008
    Location
    Your Heart, Delhi
    Posts
    76,213

    fresher

    RAVIPRASAD PANIGRAHI P
    E-mail :panigrahiravi27 AT gmail.com
    Objective :

    Seeking full time career with an organization, which will permit me to use and contribute my abilities in company development and also to enhance my knowledge and contribute towards its growth by committed and high quality work.
    Academic record :
    Education
    Masters Degree
    - MCA, JNTU Kakinada , A.P
    - Duration 2008 – 2011
    - With Aggregate 75%
    Bachelors Degree
    - B.sc.,( M.P.C) Andhra University, A P.
    - Duration 2005-2008
    - With Aggregate 68.5%
    Higher Secondary Schooling
    - Board of Intermediate Education, A P
    - Duration 2003-2005
    - With Aggregate 76%
    Secondary Schooling
    - Board of Secondary Education, A.P
    - Duration 2002-2003
    - With Aggregate 79%
    Technical Skills :
    Programming Languages : C , C++ and (. Net)
    Operating Systems : MS-DOS, Windows ,unix
    RDBMS : Oracle
    Packages : M.S.office
    Languages known :
    English, Hindi, Telugu, Oriya.
    Project Work :
    Title : Steganography Application
    Description : A simple Steganography is an application that is mainly implemented for sending secret messages merged with an image. This is one type of cryptography designed for secure communications. In this project we take inputs are image, key and secret message, by using this inputs we hide secret message and get output as extracted text message.
    Professional Competencies :
    - Team approach to meet challenges
    - Innovative attitude to problem solving
    - Aiming at excellence in work through self motivation
    - Ability to acquire new technologies quickly.
    Declaration :
    I hereby declare that the above mentioned details are correct to the best of my knowledge.
    Place : Srikakulam
    Date :

    Signature