www.cgcri.res.in Recruitment 2012 Central Glass and Ceramic Research Institute : Project Assistant Walkin

Closed Thread
Results 1 to 2 of 2
  1. Post Count Number #1
    Freelancer
    Join Date
    August 18th, 2010
    Location
    India
    Posts
    16,237

    www.cgcri.res.in Recruitment 2012 Central Glass and Ceramic Research Institute : Project Assistant Walkin

    Name of the organisation : Central Glass and Ceramic Research Institute ( cgcri.res.in )
    Name of the post : Recruitment for Project Assistant in 2012 walkin

    A Walk-in-Interview will be held on 13.02.2012 at 11-00 AM at this Institute to engage bonafide Indian citizens for the post of one Project Assistant (Non-PhD) for working in a project entitled “Development of value added ceramic products utilizing solid wastes generated at Visakhapatnam Steel Plant” sponsored by Rastriya Ispat Nigam Limited to work under the supervision of Dr. S. K. Das, PI, Chief Scientist & Head, Refractories Division at CGCRI, Kolkata. (Project No. CLP0404)

    http://www.cgcri.res.in/page.php?id=207
    http://www.cgcri.res.in/datas/users/...kin_career.pdf

    Qualifications : Diploma in Ceramics/Mechanical, BSc. (Hons. In Chemistry ) from reputed Govt. Registered Institute

    Desirable :
    (a) 2/3 years experience in Ceramic processing & testing
    (b) Adequate computer skill with experiences in MS Office applications

    Stipend : Rs.8,000/- (consolidated) per month.

    Age : Upper Limit is 28 years (as on 01.01.2012) which is relaxable upto 5 years in the case of candidates belonging to Scheduled Castes/Scheduled Tribes and 3 years for OBC applicants.

    Tenure : Upto July, 2012

    Interested candidates are requested to attend the above interview along with Application Form & Bio-Data in the prescribed format given herein under, duly filled in all the columns enclosing self attested copes of each supporting documents/certificates. The original certificates should also be brought with him/her at the time of interview for verification. The candidates should report at least one hour before the scheduled time of interview for verification of documents. Interim enquiries in this respect will not be entertained.
    Last edited by muthukalee; February 4th, 2012 at 12:03 PM.

  2. Post Count Number #2
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    Name : MANOJ
    Email : pkmanojkumaran AT yahooco.in
    Designation / Skillset : CHIEF MECHANIC
    Looking for the oppertunity in the Cyber based Drilling rigs

    Resume :
    Education : Diploma in Mechanical Engineering
    EXPERIENCE
    Extensive offshore experience, including major repair, maintenance and overhaul of all drilling related equipment.
    Perform and supervise all maintenance tasks and able to use precision measuring instruments, read and understand mechanical assembly drawings and hydraulic, pneumatic schematic, alignment and balancing of large rotating equipment including gas turbine and compressors,centrfugual and reciprocating pumps. failure analysis and troubleshooting of mechanical, hydraulic and pneumatic equipment plus associated systems.
    Suggesting and following up predictive maintenance programs. Capable of giving all the Technical assistance necessary in the equipments overhauls and ensuring quality of work. And involved to the preventive maintenance program on the Main Engines CAT 3516 and drilling equipments like Top Drive National Oil Well,HPS-750-E-AC-SG, PS-500A, VARCO 9S Draw works Oil Well, E2000,E3000 D, Hydra Racker, Hydra Tong, BX Elevator, Hydraulic Pressure Unit, Rotary table National Oil Well, B 375 and pin drive Kelly bushing, Pipe Spinners hydraulic and pneumatic, BOP & Coomy and Hydrill control System.. Repair of various kinds of close loop hydraulic systems, hydraulic motors, Pumps and control valves of various makes such as Rexroth, Sauer, Denison etc..
    Overhauling , Alignment Mud Pump cross head, pony rod and maintenance National Oil Well 14-P-220 Overhauling of MIP 8 Stage HSB EBARA JAPAN and barrel replacement of EFI MATHER + PLAT
    Should be capable of reading hydraulic circuit diagrams and trouble shoot hydraulic systems of the Cranes. Air Compressor : Maintenance, servicing and overhauling of air compressor and valves (Bellis and morocom Ingersoll Rand, Sull Air, Gardener Denver and T.M.C. Operation, servicing and controlling and troubleshooting of water maker (reserved Osmosis and W.C) Chemical treatment and chemical fleshing and operational chemical dozing (Meco, Doshi-ion, Alfa Laval & Sondey)
    Training Course Attended :
    Wilpower PPL 2007 Hydraulical / mechanical course drilling equipment at NATIONAL OIL WELL VARCO KRISTIANSAND NORWAY AS
    Hydraulic Course at HYDRALINK Saudi Arabia.
    Coxswain, Offshore survival, Fire prevention Fire Fighting, Elementry First Aid, Pathogen Awareness, PSSR, H2S& H.U.E.T.(GTSC ABUDHABI)
    On Job Training
    : Risk Assessment, Hazard Material Awareness, Manual: Handling Energy Isolation, Safety, Slinger/ banksman, Firewatcer, Fall protection Awareness,start process, Permit to work, Confined Space Entry, Ladder Safty,Induction, Motor man Mechanical, BOP Handling and Electrical.
    Passport No. : G 4916231 Date of Issue : 19.09.2007
    Valid Till : 18.09.2017
    C.D.C No :757651
    Date of issue :06 oct 06(LIBERIA)

    WORK EXPERIENCE
    1.Chief Mechanic, employed with Arabian Drilling Company, onboard offshore Cyber based drilling jack up rig in Saudi Arabia june 2009-P.D
    Senior rig mechanic, employed with arabian drilling co. onboard offshore Cyber based drilling jack up rig from augest 2006 and one year work as senior mechanic on land Rig (Arabian Drilling Co.)
    2. Worked on Transocean as motor man(TRIDENT-12,JACK UP RIG)
    at Bombay High Offshore Project from October 2003 to 30th December 2004
    3. Worked as Field Engineer for Reliance Gas for their wellhead test equipment and test manifold installation.(transocean NORDIC at Gujarat cost. from2002 to 2003.
    4. Worked as field engineer at O.N.G.C. Bombay High Process Complex for their various operations like Installation commissioning and overhauling of Heavy rotary equipments and HVAC Systems.(On the basis of contract jobs)from 1999 to 2002.
    5. Worked as mechanical technician at O.N.G.C. Bombay high process complex (Homa engineering an ONGC contract.) 1996to 1999
    6. Worked as production Assistant for O.N.G.C production and process complex at Bombay high offshore project .1995-1996
    Basic Information.
    Badge Name LOCATION Status Work Type
    5728 Manoj Painummoottil Kumaran AD-38 Active Offshore
    Training history
    COURSE Attended On Status
    SIPP Level-1 14-feb-2010 Valid
    Rigging and lifting 03-feb-2010 Valid
    Hazard identification level-1 26-nov-2009 Valid
    H1N1 Flu level 1 15-nov-2009 Valid
    Scaffolding safety 08-nov-2009 Valid
    Fatigue management 29-sep-2009 Valid
    SIPP (CTA) 20-Aug-2009 Valid
    HUET&SEA Survivel 11-aug-2009 Valid
    Air Hoist Operator Training 10-apr-2009 Valid
    Working at Height 09-Apr-2009 Valid
    Confined Space Training 10-Apr-2009 Valid
    Spill Prevention Training 06-Apr-2009 Valid
    Asbestos Awareness 06-Apr-2009 Valid
    Lock Out Tag Out 12-Mar-2009 Valid
    Permit To Work 12-Mar-2009 Valid
    Hazard Commmunicaton 10-Mar-2009 Valid
    Respiratory Protection Training 19-Jul-2008 Valid
    H2S Test 19-Jul-2008 Valid
    First Aid With Cpr 19-Jul-2008 Vlid
    H2S 19-Jul-2008 Valid
    Rig Orientation 16-Jun-2008 Valid
    SIPP 24-Apr-2008 Valid
    Aramco Helicopter Pasenger Safety Training 25-Feb-2008 Valid
    Helicopter Escape 25-Feb-2008 Valid
    Stop For Employees 24-mar-2008 Valid
    Advanced fire Fighting 08-Sep-2008 Expiered
    PSSR 06-Sep-2006 Valid
    First Aid At Sea 03-Sep-2006 Valid
    Davit Lanched Life Raft 31-Aug-2006 Valid
    Coxswains 29-Aug2006 Expired
    Rig Site Fire Fighting Cold Type 10May-2006 Valid
    Fire Team 10-May-2006 Valid
    Mechanic Module 21-feb-2006 Valid
    Driving Training Level-1 17-Feb-2005 Valid
    Mechanical lifting 15-Feb-2005 Valid
    QHSE Induction 15-feb-2005 Valid
    Vehicle Passenger 15-Feb-2005 Valid
    Introdectory Module 15-Feb-2005 Valid
    NEST 15-eb-2005 Valid
    Rig Pass Certification 15-Feb-2005 Valid
    Hydraulic Course (Hydralink) 16-Dec-2009 Valid
    Hydraulic/mechanical Course (NOV Norway) 16-Jun-2006 Valid
    Motor operator module 23-oct-2004 Valid
    DECLARATION
    I hereby declare that all statements made in the application are true to the best of my knowledge and belief.I am aware that my application is liable to rejected to the information given above is in complete or incorrect.
    Place NEDUMKANDAM
    DATE : 06/08/2011
    P.K. MANOJ
    -------------------------------------------------------
    More Information about this submission and submitter :-
    ___________________________________________________
    Submission ID : 4453767
    Date & Time : 7th Aug 2011 1:55 AM (UTC)
    IP Address : 27.97.34.59
    Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
    Predicted Country : --