www.tdb.gov.in Recruitment 2012 Technology Development Board : Section Officer
Name of the organisation : Technology Development Board ( tdb.gov.in ) Name of the post : Recruitment for Section Officer in 2012
Filling up one post of Section Officer in TDB on short term contract/ absorption
Government of India has constituted Technology Development Board (TDB), a statutory body under the Department of Science & Technology in the year 1996 to administer the Fund for technology development and application. TDB provides financial assistance in the form of loan, equity, and grant to industrial concerns and other agencies for development and commercialization of indigenous technology and adaptation of imported technologies for wider domestic application.
SECTION OFFICER:
In order to fill up one vacancy of the Section Officer, it is proposed to prepare a panel of eligible applicants for these posts. The pay scale of this post is as follows:
Section Officer: Pay Scale of Rs. 9300-34800 + Grade Pay Rs. 4800/- (PB-2) Pay Scale of Rs. 15600-39100 + Grade Pay Rs. 5400/- (PB-3) [for candidates working on similar post with 8 years of regular service]
JOB PROFILE : The job involves dealing in various matters related to establishment, personnel, general administration and account of the TDB.
NATURE OF POST : The above post is to be filled by short term contract failing which by absorption. The period for short term contract will be initially for one year, which may be extended up to three years.
NUMBER OF VACANCIES : One. The panel prepared for the purpose will be valid for one year.
ESSENTIAL QUALIFICATIONS : Academic : Graduate in any stream. Experience : I. Short Term Contract :
i. Officer retired from the Central Government from equivalent post with at least 5 years experience in regular basis/ one grade lower with 8 years experience on regular basis.
ii. In case no eligible candidate applies as per above mentioned criteria, Assistants of CSS with 5 years of service will be considered.
iii. Experience in the field of administration and knowledge of Government Rules is essential.
AGE LIMIT : Not exceeding 56 years as on date of application for absorption basis.
LAST DATE OF APPLICATIONS : The applications in the prescribed format complete in all respects should reach the given address on or before 20th February, 2012 by 05.30 PM.
HOW TO APPLY : The applications are to be sent as per the prescribed format. The applicants working under Central Government/ State Government/ Public Sector Undertakings/ Autonomous Bodies/ Universities etc are required to submit their applications through the proper channel.
An advance application may be sent, which will be considered only if the application through proper channel is also received within the time period prescribed by the Selection Committee.
The parent institutions are required to enclose photocopies of the ACRs of the individuals for the last five years, duly attested by an officer not below the rank of Under Secretary to the Government of India and also the no-objection certificate, while forwarding the application.
The clearly filled in applications, clearly subscribing on the envelope ‘Application for the Post of Section Officer in TDB’ are to be sent to the following address: THE UNDER SECRETARY
TECHNOLOGY DEVELOPMENT BOARD
DEPARTMENT OF SCIENCE AND TECHNOLOGY
VISHWAKARMA BHAWAN
WING-A, GROUND FLOOR,
SHAHEED JEET SINGH MARG,
NEW DELHI – 110 016
Name : pradeep seth Email : prad.9050 AT gmail.com Designation / Skillset : qa/qc inspector ,able to handling all qc related job
Resume :
Objective
I seek to join an organization that provides me with ample opportunities to learn, grow and revitalize on a continuous basis. I want to enhance my skill by taking various assignments while learning from experienced members. I want to prepare myself to take up the position of greater responsibilities..
Academic Qualification
µ B.Sc. (Bachelor in Science) from University of Jaunpur in 2004 (First Div.).
µ Intermediate from U P Board in 2000 (First Div.).
µ High School from U P Board in 1998 (First Div.).
Professional/OTHERS qualification
µ Complete Diploma in Mechanical engineering from Xaviers University in 2007.
µ Completed Level-II NDT Certification Course (RT/UT/DPT/MPT)
µ Complete “O” Level Computer Programming from “DOEACC” Delhi in 2006-07.
FAMILIar with
- Familiar with Isometric Drawing, Piping Specification class and ASME Code.
Experience
(3 YRs. 6 MONTHS) current job :
Working with INFRATECH E&C company in GGSR project since nov.2010 to till date in Quality Department as a qc inspector. Current Project : GURU GOVIND SINGH REFINARY, BHATINDA PMC : Engineers India Ltd, India. OWNER : HMEL (HINDUSTAN MITTAL ENERGY LTD.) Job Profile :
- Daily welding, fit up & radiography film inspection.
- Interpretation of radiography films,dpt etc.
- Check loop and complete NDT requirements.
- Record of welder test qualification
- Resolved site activities related problems
- Knowledge of Qualify WPS and WQT records.
previous Job
(QA/QC dePARTMENNt)
Worked in M/s Larsen & Toubro Limited, ECC Division, Guru Govind Singh
Refinery. Since 11th.Nov.2009 to nov. 2010 previous Project : GURU GOVIND SINGH REFINARY, BHATINDA PMC : Engineers India Ltd, India. OWNER : HMEL (HINDUSTAN MITTAL ENERGY LTD.) Job Profile :
- Isometric Spool marking through AUTO SPOOL DRAFT SOFTWARE.
- Proper Inspection of all fit-up reports & welding reports and update through Isometric drawing.
- Checked RT Reports, DPT /MPT Reports and update.
- Prepare Client Bill Measurement datas and Sub-Contractor bill datas.
- Preparation, submission, certification of Client Invoice and RA BILL on or before 10th of every month.
- Monitoring of updating of all activities data. Previous Job :
(QA / QC Assistant/Alps Administrator)
Worked in M/s Larsen & Toubro Limited, ECC Division, IOCL Panipat Refinery PNCP EPCC-2A Project in Activity Level Planning System(ALPS), since September 2008 to Nov. 2009 PREVIOUS Project : Polypropylene Plant & Product Warehouse,
Naphtha Cracker Project, IOCL, Panipat, India. PMC : Engineers India Ltd, India. Client : TECNIMONT S.p.a Italy OWNER : IOCL, PANIPAT Job Profile :
- Proper checked all fit-up reports & welding reports and update through Isometric drawing.
- Create the records of NDT, MC and HT.
- LOOP CONTROLLING ACTIVITES.
- MECHANICAL CLEARANCE & ISOMETRIC DRAWING CHECK & MARKING.
- Create Line History for further process such as Mechanical clearance,
Fulfill to NDT etc.
- Monitoring of updating of all activities data.
- Control all Documentation, like fitup, welding, DPT etc. Previous Job :
[EDP Executive Cum CCE]
Worked in Amitdeep Motors (An authorized Dealer & Service Workshop of Maruti Suzuki India Ltd.), 26 Sulem Sarai, Allahabad Since August ’07 To Sept. 2008. Job Profile : - Administration :
- Correspondence to Maruti officials either through mail or telephone.
- Solving all problems related to DMS with help of Wipro & Maruti.
- Interact with managerial, administrative and technical staff to determine information needs and data flows.
- Customer handling & solving their problems.
- Check washing quality before vehicles delivery. - Report Generation :
- Dealing with online DMS package.
- Generating all documents related to customer like Booking, Receipt, and Vehicles etc.
- Generating Daily / Monthly Reports related to DMS, like Action Plan, Productivity reprt, Progress report etc.
- Reporting to Maruti, and time-to-time reporting to Wipro.
Computer Skill
- MS Office 97/2000/XP/2007 (Word, Excel, PowerPoint, Outlook).
- Windows 98/2000/XP, Outlook Express v6.
- Well versed with Advance Knowledge on Internet.
- FoxPro, HTML, MS-DOS, MS-FrontPage. - System Tools : Backup, Defragmenter, System Restore, etc
Strength
- Ambitious, Hard Working and Quick Learner
- Positive and Professional Approach
- Effective Communication.
(Pradeep Kumar Seth)
------------------------------------------------------- More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4439147
Date & Time : 3rd Aug 2011 5:38 AM (UTC)
IP Address : 80.239.243.138
Browser Info : Opera/9.80 (Android; Opera Mini/6.24556/25.692; U; en) Presto/2.5.25 Version/10.54
Predicted Country : Poland