www.nbccindia.gov.in Careers 2012 National Buildings Construction Corporation Limited : Mechanical, Civil Engineer

[muthukalee]

Name of the organisation : National Buildings Construction Corporation Limited NBCC ( nbccindia.gov.in )
Name of the post : Careers for Mechanical, Civil Engineer in 2012

NBCC REQUIRES PERSONNEL FOR FOLLOWING POSITIONS ON REGULAR BASIS

http://www.nbccindia.gov.in/nbccindi...b/nbccjobs.jsp
http://www.nbccindia.gov.in/nbccindi...12_ENGLISH.pdf

SPECIAL RECRUITMENT DRIVE FOR PERSONS WITH DISABILITIES,
OBC CATEGORIES:
- DEPUTY MANAGER (HRM)
- HINDI TRANSLATOR
- SR PROJECT EXECUTIVE (CIVIL)
- JUNIOR ENGINEER (CIVIL)
- SENIOR STENOGRAPHER

GENERAL RECRUITMENT :
- GENERAL MANAGER (HRM)
- ADDITIONAL GENERAL MANAGER (ENGG-CIVIL)
- DY. COMPANY SECRETARY
- ASSTT. COMPANY SECRETARY
- DY. GENERAL MANAGER (ENGG - MECHANICAL)
- MANAGER (MARKETING)
- MANAGER (PHE)
- DEPUTY MANAGER (STRUCTURAL)
- DEPUTY MANAGER (ARCHITECTURAL)
- DEPUTY PROJECT MANAGER (ELECTRICAL)
- DEPUTY PROJECT MANAGER (CIVIL)
- SENIOR PROJECT EXECUTIVE (CIVIL)
- SENIOR PROJECT EXECUTIVE (MECHANICAL)
- SENIOR PROJECT EXECUTIVE (ELECTRICAL)
- PROJECT EXECUTIVE (CIVIL)
- PROJECT EXECUTIVE (ELECTRICAL)
- PROJECT EXECUTIVE (MECHANICAL)
- SECRETARIAL OFFICER
- JUNIOR ENGINEER (CIVIL)
- JUNIOR ENGINEER (ELECTRICAL)
- JUNIOR ENGINEER (MECHANICAL)

Application should be filled up in prescribed proforma only with BOLD letters either in English or in Hindi. The post for which the application has been made should be clearly indicated. Non-refundable Application fee of Rs 100/- (Rupees one hundred only) in the form of Demand Draft favouring M/s NBCC Limited payable at New Delhi is required to be attached alongwith the application form. SC/ST/Persons with Disability/departmental candidates are exempted from payment of application fee. Candidate can appear for written test/ interview in English/Hindi language, as per their choice. Incomplete/unsigned/late applications/applications without supporting documents and without application fee will not be entertained and will be summarily rejected. Application received through email will also not be entertained.

The envelope should be superscribed with the Advt. No. and post applied for. Applications in the prescribed format along with attested photocopies of educational/ Professional qualification, Age, Caste & Experience certificates/application fee should reach to the
Executive Director (HRM),
NBCC Limited,
NBCC Bhawan, Lodhi Road,
New Delhi-110003
latest by 05.03.2012.

[Guest-IJT]

Name : B.SRYANARAYAN RAJU
Email : suryadme AT yahoo.co.in
Designation / Skillset : engineer

Resume :
CARRIER OBJECTIVES :-
Seeking assignments to manage , manufacturing and production management, continuing operations, sophisticated high tolerance manufacturing processes with a technology driven organization of repute. Communicative, resourceful, creative mentor leadership.

Carrier Profile :-
AUGUST 2008 TO TILL DATE PIX TRANSMISSIONS LTD.
JUNIOR ENGG (R & D)
JUNE 2007 TO AUGUST 2008 POLY BOND INDIA PVT LTD.
TRAINEE ENGG (PRODUCTION )

Present Job Highlights : -
Working in PIX TRANSMISSIONS LTD ( BAZARGAON NAGPUR ). - One of the India’s leading manufacturers of Power Transmission belts, Fluid Trnsmission hoses and end fittings. An ISO 9001 :2000 , TS 16949,ISO 14001 & OHSAS 18001 certified company holding major market share at the export and domestic and OEM’s.
The major custmers are Perkis Europe Ltd, Escort ClaasLtd, CNHLtd, Greaves Cotton Ltd, BEML, Huqvarana Fiat etc.all the plants are having ISO 9001-2000 Quality System.
Designation JUNIOR ENGG (R & D)
Job Responsibilities
1. Preparing process specification for all types of V- Belts
2. Getting Approval for the prototype ,making necessary modifications and releasing the same for
commercial production .
3. Conducting trials & tests, identifying any changes and making final modification for routine production
4. Handling the SRS ( Sample Requisition Slip ) and preparing FMEA , PPAP & APQP for new new product & process development etc.
5. Handling the new product devlopments, trouble – shooting f all the operations & process trials..
6. Identifying areas of quality failures & taking steps to rectify the system wide preventive and
corrective actions to avoid the recurrences.
PAST EXPERIENCE
POLY BOND INDIA PVT LTD.. (JUNE 2007 TO AUGUST 2008 )
POLY BOND INDIA PVT LTD.. ISO 9001 :2000 ISO 14001 Leading automotive rubber component manufacturer in India. Manufacturer of , various injection moulding parts .
Designation TRAINEE ENGG (PRODUCTION )
Job Responsibilities :-
1. Responsible for Production with optimum utilization of resources .
2. To plan , monitor & control production as per schedule .
3. Root cause analysis and proactive countermeasure and ensure very clearer standard to avoid rejection & rework
4. Ensure smooth production by line balancing at various stages .
5. To plan and monitor dispatches by proper coordination with customer.
6. To carry out various timp studies related activities for process improvements to increase productivity and to remove bottlenecks .
Additional
- Attended the KAIZEN Workshop conducted at Pix Transmission Ltd.
- 1 day Six Sigma Basic Awareness training conducted by Mr A.K.Chaudhary Lead Auditor Bureau Veritas.
- Implemented project of switching over from PRESS curing to POT curing process in order to reduce process
time & curing time to increase productivity.
- Implemented project to improve life of cog sheets by using nylon stretchable fabric.

Professional Qualification
Diploma in Mechanical Engg from R.G.T.U Bhopal with an aggregate of 55.57 % in the year 2007.
HSC from M.P Board Bhopal with an aggregate of 58 % in the year 2003..
Computer Exposure - MS office , Autocad Basic

Total Working Experience - 3 Years
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4393126
Date & Time : 20th Jul 2011 3:18 PM (UTC)
IP Address : 183.177.124.6
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; InfoPath.2)
Predicted Country : --

[Guest]

my name is shoiab nadeem khan.i had completed my b.e. Civil through university of kashmir in 2011 oct with 70% approx.it wil be my honour to work with your company

[Guest]

CURRICULUM-VITAE
DINESH KUMAR PAL
E-mail : dinesh.pal70 AT gmail.com

Objective
Seeking a position to utilize my skills and abilities in the industry that offers Professional growth while being resourceful, innovative and flexible.
Educational Qualification
- M.B.A. from B.I.T. Meerut from UPTU
Lucknow U.P.(Finance & Marketing)
- Graduate in B.Com from Dr. A.H.R.S. Degree College (Veer Bhadhur
Singh. Purvanchal University JAUNPUR U.P.) in Year 2008.
- Passed intermediate. (12th) from U. P. Board in Year 2005.
- Passed Class 10th from U P. Board in Year 2003.
Computer
Skills
- Diploma in computer application
Summer
Internship
Work
Experience - I have done summer training in NEUSOURCE PROCESS OUTSOURCE Pvt. Ltd. In filling of ITR1 & ITR2
- Organization : NeuSource Process Outsource Pvt. Ltd.
Duration : 2 Month.
Place : Gurgaon

- Now I am Working With NeuSource Process Outsource Pvt.Ltd. as Account Executive from 25th of Jun 2011
- I am doing following Things :-
- Entry of purchase bill in tally.
- Entry of sale bill in tally.
- Entry of cash voucher in tally.
- Entry of journal Voucher in Tally.
- Entry of job work in tally.
- Entry of indent in tally.
- Preparing of store record Maintain in tally.
- Bank Reconsilation.

Declaration : I here by declare that above information is true to the best of my knowledge and
Belief.

Date :
Place :
(Dinesh kumar pal)

[Guest]

CURRICULUM-VITAE
PARV SAINI (CIVIL Engg.)(4.5Yrs. Exp.)
Email :- parvsaini2008 AT rediffmail.com
- CAREER OBJECTIVE : Wish to attain a responsible position in a prestigious organization that offer opportunities to make best use of my knowledge and technical skill to further personal knowledge professional and offers high growth prospect.
- ACADAMIC QUALIFICATION : High school from U.P. board in 2004 with 67.80%.
- TECHNICAL QUALIFICATION :
Diploma in CIVIL (Environment & Pollution Control) from Govt. polytechnic SORON (ETAH) Under Board of technical education, Lucknow with 1st division securing 72.5% marks on May 2007.
- COMPUTER QUALIFICATION :
MS-OFFICE,C &C++ LANGUAGE & AUTO CAD.
- PRESENT WORKING :
Now I am working in JAI PRAKASH ASSOCIATES LTD. Sec. 128 Noida at Real Estate Project from Nov.2009 .Job descriptions.
I have executed the work of Piling up to 20mtr. under raft. Now I am executing the work of Twenty two story high rise building which is making with MIVAN FORMWORK which is a new technology of shuttering.
- PREVIOUS WORKING EXPERIENCE :
: Experience in construction of multistory building from AJNARA FARMS & SERVICES LTD. at Crossings republic NH-24 Ghaziabad (U.P.).as a Site Engg. from August2008 to October2009
: Experience in construction of W.B.M. Soling for R.C.C. flooring from ROHANS BUILDER Pvt.LTD. in construction of ASHOK LAYLAND COMPANY (RUDRAPUR, UTTARAKHAND) from June 2007 to july2008. as a Trainee Engineer.
- JOB RESPONSIBILITIES :
- Lay out for excavation of Raft of twenty second story building.
- Checking of raft reinforcement &col. Shear walls reinforcement, plywood shuttering of columns, shear walls, slabs.
- Mobilization of site.
- Making B.B.S. & prepare all requirements of site.
- All quality test of reinforcement, concreting.
- Surveying.
- Use of Auto level, Theodolite.
- Execution of brickwork, plastering, floor &wall tiles, stone work, trimix, P.O.P. punning, plumbing.
- Making bills for all sub-contractors.
- Execution of plumbing ( Drainage & Water supply sustem) in which (C.I. , G.I., P.P.R., CPVC, UPVC) pipes are using.
- Execution of Trimix flooring.
- Execution of Fabrication work.(Making railing).
- HOBBIES :
Reading, Writing, Listening Music, Chess, Volleyball.
- STRENGTH :
Ability to grasp new ideas, concepts challenging well strongly motivated &result oriented. I believe in team work. Complete attention with dedication towards the task given to me.
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the
Responsibility for correctness of the above mentioned particulars.
Date…………….. (PARV SAINI)

[Guest]

DEAR SIR,
PLEASE FIND ATTACHED RESUME FOR YOUR REFERENCE
RESUME
1. Proposed Position : Sr. Design Engineer
2. Name : MR.SUHAS UDDHAV BELE

6. Education : B.E. Civil from Shivaji University 1999
M.E. Civil-II from Shivaji University 2001
7. Computer Skill : MS Office, AutoCad-2008, Staad Pro,
Etab , Safe Etc.
8. Marital Status : Married

9. Languages Known : Marathi , Hindi & English

10. Membership Professional Societies :
Institute Of Civil Engineers- Associate Member
12. Countries of Work Experience :
India.
13. Employment Record
Period of employment : 2001 to 2004

Employer : M/s.Nageshkar And Associates Kolhapur.
Position Held : Jr. Design Engineer

Period of employment : 2005 to till date
Employer : M/s.Mahimtura Consultants Pvt.Ltd.
Position Held : Sr. Design Engineer
Description of duties : Complete structural analysis using STAAD III, RCC designing, seismic analysis, wind analysis as per relevant IS codes.
14. Detailed Task Assigned and Work Experience which best illustrates capability to handle the assigned tasks.
R.C.C. designs, structural analysis for various residential & commercial structure.
1) Project : Hospital Building at Kolhapur.
Client : M/s.Dr. Kelavkar Kolhapur
Scope : Design & structural analysis for Ground
+ 3 Floors.
Period : 6 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
2) Project : Residential Building at Kolhapur.
Client : M/s.Golvalkar Kolhapur
Scope : Design & structural analysis for Ground
+ 3 Floors.
Period : 5 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
3) Project : Office Building And Godown with Service
Structure at Islampur, Sangli

Client : M/s.RajarambapuDudh Sangh Islampur
Scope : Design & structural analysis for Ground
+ 4 floors commercial building with
shopping at ground.
Period : 8 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
4) Project : Hotel Building at Udaipur.
Client : M/s.Hotel Leela Ventures Ltd. Mumbai
Scope : Design & structural analysis for Ground
+ 5 floors.A&B Wing Old and New
Structure.

Period : 12 Months.
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
5) Project : Residential Building at Faridabad, Hariyana
Client : M/s.Pal Group Faridabad Hariyana
Scope : Design & structural analysis for 2
Basement + Ground + 16 Upper floors
residential tower.
Period : 12 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
6) Project : Residential Building at Matunga, Mumbai
Client : M/s.Khandelwal Group Of Companies.
Mumbai
Scope : Design & structural analysis for
Basement + Ground + 7 Upper floors
residential building with all amenities.
Period : 6 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
7) Project : Commercial Building at Andheri, Mumbai
Client : M/s.Mr. Ahuja Builders Mumbai
Scope : Design & structural analysis for
Basement + 8 floors.
Period : 6 months
Role : Co-ordination with Architect, Client and
Site personnel’s, for execution of the project.
8) Project : Rehab Building A&B Wing at Parel,
Mumbai
Client : M/s.Orbit Corporation Ltd. Mumbai
Scope : Design & structural analysis for
Basement + Stilt + 15 Upper floors
residential tower.
Period : 9 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
9) Project : Residential Complex Building at Sakinaka
Mumbai
Client : M/s. Orbit Corporation Ltd. Mumbai
Scope : Design & structural analysis for
2Basement + Ground +14Upper floors
residential building. Wing-A to E

Period : 12 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
10) Project : Residential Complex Building at
Marindrive, Mumbai
Client : M/s. Orbit Corporation Ltd. Mumbai
Scope : Design & structural analysis for
Basement + Ground +13Upper floors
residential building.

Period : 12 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
11) Project : SRA Residential Building at Chembur,
Mumbai
Client : M/s. Aspen Cooper. Mumbai
Scope : Design & structural analysis for Ground
+12Upper floors residential building.

Period : 9 months
Role : Co-ordination with Architect, Client and
Site personnel’s,for execution of the project.
Your’s Sincerely, Place
Bele Suhas Uddhav Pune

[Guest]

I am pursuing my B.Tech in Mechanical engineering from chennai. Please kindly tell me how can i apply for the engineer post in your company(NBCC).

[Guest]

CURRICULUM-VITAE
DEEPAK KUMAR
Email : - nkmehra.mehra AT gmail.com
dkmehra.deepmehra AT gmail.com
CARRIER OBJECTIVE
Looking forward for a very good and challenging position in the industry where I can use my skills to lift organization and learn.
QUALIFICATION & EXPERIENCE
Involved with architectural projects of varying scales in Delhi, gourgon, Karnal (Haryana). Experience in Designing and Detailing. Lists of Projects handled are as follows
1. CSO in Architecture and Engineering Pvt. Ltd.
Position : - Cadd Drafting(only) Fire Project (Protection from fire)
Residential
- Residence, Raja Puri,
Scope of work : Architectural Consultant – Architectural Concept Design
- Kamla nagar,
Scope of work : Architectural Concept Design (Selected)
2. Recro Kardo Architecture interior landscape (current job)
Position : Assistant Architect
- Gurgaon (Haryana)
Scope of work : Architectural Consultant – Architectural Detailing
Commercial (All Project in Delhi and Gurgaon)
- Offices Interior Projects
Scope of work : Architectural Consultant
Residential
- Neb Sarai ,
Scope of work : Architectural Concept Design (Selected)
- Bhatia, Noida ,
Scope of work : Architectural Concept Design (Selected)
- Chopra, Jasola ,
Scope of work : Architectural Concept Design (Selected)
Total Experience : - 3 years of cad drafting and Designing

Specific area in which I’m working : - Architectural designing, Detailing and drafting, interior designing.
Interested Area : - Architectural Services (Institutional, Housing, Commercial Projects, etc.)
ACCADEMIC QUALIFICATION
Standard University Year
X C.B.S.E. 2002
XII C.B.S.E. 2004
B.A(H) Graduate University of Delhi -
TECHNICAL QUALIFICATION
- Diploma in Architecture. (Aryabhatt Polytechnic, New Delhi in 2010)
Standard Institute University Year
1st Sem. Aryabhatt Polytechnic B.T.E. (Delhi) 2009
2nd Sem. Aryabhatt Polytechnic B.T.E. (Delhi) 2008
3rd Sem. Aryabhatt Polytechnic B.T.E. (Delhi) 2008
4th Sem. Aryabhatt Polytechnic B.T.E. (Delhi) 2009
5th Sem. Aryabhatt Polytechnic B.T.E. (Delhi) 2009
6th Sem. Aryabhatt Polytechnic B.T.E. (Delhi) 2010
SOFTWARE SKILLS
Skill Name Skill Level Last used Experience
MS Office Good Currently 1 Years
AutoCAD (2D only) Good Currently 2 Years
Photoshop Basics 1 Months
3Ds Max Basics Currently 1 Months
STRENGTH
- Capable of working in team with valuable contribution.
- Hard working and dedicated to work with keen interest in learning along with work.
HOBBIES
Playing Chess & Volley ball, Listening music, watching movies
Certificate
The Information furnished above is true to the best of my knowledge and belief.
Signature
(DEEPAK Kumar)

[Guest]

Name :D K Mittal
Present Post :Sr Manager Rajabhasha in a Nationalized Bank
Work Experience : 24 years of experience of implementation of Official Language Policy out
of which 20 years experience in the capacity of Officer, Manager and
Sr Manager
Qualification : MA ( Hindi),
MSW( specialization in PM & I R)
Bech. degree in Journalism & Mass communication
CAIIB( Professional Degree for Bankers.

Technical : Certificate from Central Translation Bureau New Delhi.
Qualification
Others : I have faced Parliamentary Committee on Official Language 4 times
Present CTC Approx 8 Lakhs PA
Expected
remuneration 12 Lakhs PA
Looking for Higher Post/ Department Head in any Public Sector Undertaking