www.ramcocement.in Recruitment 2012 Madras Cements Limited : Electrical, Industrial Engineering Manager

[muthukalee]

Name of the organisation : Madras Cements Limited ( ramcocement.in )
Name of the post : Recruitment for Electrical, Industrial Engineering Manager in 2012

Sales Officers
MBAs with 2-5 years of selling / marketing experience in FMCG, building materials, consumer products and consumer durables may apply. Exposure to dealer management and credit management is a must. Fresh MBAs with excellent academic background may apply for trainee positions.

http://ramcocement.in/Openings.aspx

Technical Sales Officers
Civil Engineering graduates or diploma holders with 2-5 years of result oriented experience in sales, marketing, customer service and dealer network areas of consumer products would be preferred. Candidates should be tech-savvy, go-getters with high degree of drive and motivation

AGM-Civil
Graduate Engineers in Civil with a minimum of 16 years of experience in execution of civil projects. Innovative persons with exposure to planning will be preferred

Manager-Electrical
Graduate in Electrical Engineering with a minimum of 10 years relevant experience in cement / process industry. The incumbent will be responsible for installation and maintenance of HT and LT electrical equipments such as transformers, switchgears and motors. Experience in captive power generation and liaisoning with Electricity Board officials is an added advantage.

Dy.Manager-Industrial Engineering
Graduate in Industrial Engineering or Mechanical Engineering with specialization in Industrial Engineering or Engineering Graduate with Post Graduate Diploma in Industrial Engineering from reputed institute having 5-7 years of experience in a process industry or an engineering industry is preferred. Key responsibilities would include productivity studies and improvements, energy conservation, equipment life-cycle costing studies / reliability studies, inventory control studies, manpower utilization studies, productivity improvement and TPM/ TQM.

Dy.Manager-Mines
Diploma / Degree in Mining Engineering with competency certificates in I class / II class, having a minimum experience of 5 years. He should be conversant with operations in mechanized open cast mines, preferably in limestone mines with adequate knowledge in maintenance of EME, computerized mine planning and statutory laws applicable to mines.

Deputy Officer-Process / Quality Control
Chemistry Graduates with a minimum of 2 years experience in a large modern cement plant may apply for process control and CCR operations.

DGM-Personnel /HRD
Post Graduates in Personnel Management from a reputed institution having a minimum of 16 years of experience. Key responsibilities would include human resource planning, talent acquisition, development and retention, employee engagement activities, employee relations and performance management. Exposure to ERP enabled HR systems and contemporary HR practices will be preferred. Persons with 3-6 years experience in a manufacturing industry may also apply for Asst.Manager-Personnel position in the factory location in Tamil Nadu.

Manager-Lands & Liaison
Graduate or Post Graduate with good communication skills with a minimum of 20 years of experience in dealing with acquisition of land. Should be well versed in administration, public relations and in dealing with statutory authorities.

Contact us :
Madras Cements Ltd.
Auras Corporate Centre
98-A Dr.Radhakrishnan Salai
Mylapore, Chennai - 600 004

[Guest-IJT]

Name : farid
Email : faridkavish AT yahoo.com
Designation / Skillset : senior tech/electrical estimator/electrical supervisor

Resume :
Objective
Seeking a challenging position in a prestigious and esteemed organization that warrants an opportunity to not only learn but also demonstrate skills acquired over the course of my professional studies and in a competitive and encouraging milieu that utilizes my strengths to the hilt while enabling me to grow as a person.

Qualification Institution Year Of Passing Division DAE (Electrical))
Board of Technical Education Peshawar 1993~1996 1st
S.S.C. (Secondary school certificate) Board of Intermediate and Secondary
Education Peshawar. 1991 1st
One year post diploma in nuclear power plant technology from 1998 to 1999 from kin Poe Karachi at Chashma center for nuclear training.

Certificates
Skills
Installation of Win 98/ME/2000/XP.,Installation of other software e.g., MS-Office., Troubleshooting of computer hardware, Using Office 98/2000/ME/XP.
Web browsing Email & Chatting Honour
Held 1st position for successive three years in diploma of associate engineering in NWFP board of technical education from 1993-1996.

ELECTRICAL OPERATION
AND MAINTENANCE
Employment History & Professional Experience
1) 7th July 1996-31st December 1996
Worked as Assistant Engineer for Nasir Shah & Brothers (Govt. Contractors) for street lighting, road and building electrification, including drawings load calculation estimation and execution of work.To handle various stages of tenders from proposal initiation to order placement, including Evaluations and finalization of Contract Agreements
2) 12th February 1997- 20th April 1998
Worked as Junior Officer (Electrical) in Kohat Cement Company Ltd. from 1997-1998 and gained the following experience in pump house, packing plant, and compressor station through following P.L.C system.
a) Siemens PLC Simatic S-5
b) Allen-Bradely PLC 5/40 Enhanced System
c) Allen-Bradley PLC 1747 Series
Plant Operator (Electrical)/SENIOR TECH
Chashma nuclear Power Plant
27 April 1998 - Present
Chashma, Punjab Pak.
1 Maintain Log book and Data Sheets about electrical activities.
2 Analysis and supervision of Electrical activities.
3 Supervise major tests, i.e. High voltages withstand tests, Magger tests and Transformer tests.
4 Preparation and reviewing of operating procedures for isolation, normalization and safe operation of different Substation equipments.
I. Participate in commissioning of electrical equipments with Chinese including HV switchgears, MV vacuum circuit breakers, Transformers, UPS, DC Systems, Excitation system and Generator & Main Transformer protection systems etc.
II. Having excellent experience of operating 220KV Gas Insulated Switchgear(GIS)
III. Operation of Main generator (325MWe), excitation system and its synchronization with the Grid
IV. Trouble shooting and general operation of HV transformers and their cooling systems, LV cast resin type transformers, LV&HV panel operation, UPS 220 AC system, 220VDC system and their rectifier units. DC battery system, operation of high voltage vacuum and SF6 circuit breakers.
experience in other plant areas
Having experience of steam turbine operation.
Having experience of combined cycle gas turbine operation.
Having experience of water treatment plant.
Having knowledge with the operation (start-up/shutdown/blackout) of modern equipment (pump-motor, generators, control panels, workstations, switchgear and auxiliaries). Knowledge on equipment behavior, fault identification and analysis.
Worked as sub station operator at 132kv sub station.
Computer literate (MS Office) and able to prepare operational reports .Having knowledge in safety regulations .Possess good communication and English skills.
Responsible for monitoring and operating the plant equipments from the main control boards and optimize operation, maintaining the logbooks and data sheets.
Team player and excellent leadership qualities.
.9) Handling Turnkey Projects for 400, 132, 33 kV Substations with GIS, Power and Distribution Transformers, 400 and 132 kV Switchgears, 11 to 400 kV Overhead Lines, Cables, SCADA Works, Spares, Instrumentation and associated Electro-Mechanical
10) Connecting Motor control panels including M.V, L.V Breaker, Contactors, overloads relays (Thermal and Micro Processor over load relay) and electronic voltage relay, Timers and zero sequence earth fault relay, motor protection relays.
11) Hands on in installation of Digital Analogue I/P, O/P Modules in PLC racks and DCL system.
12) Handling Turnkey Projects for 400, 132, 33 kV Substations with GIS, Power and Distribution Transformers, 400 and 132 kV Switchgear
13) 11 to 400 kV Overhead Lines, Cables, SCADA Works, Spares, Instrumentation and associated Electro-Mechanical work
14) Connecting, power and control cables, testing and faultfinding Direct-On-Line, reverse-forward Star-Delta Motors, 3-phase, 2Direction, and Star- Delta Motors.
15) Operation of Vacuum Breakers (6KV) from hot stand by to cold standby &Cold Standby to hot standby and also hands on in connecting and troubleshooting of control wiring.
16) Hands-on using digital multimeter, digital clamp meter, digital tachometer, grease tester, over current tester 6 kV on line tester, calibrator, meggring of motors and connecting ammeter and voltmeter.
17) Testing and checking of Sub-control panels and programmable logic controller panels.
18) Under standing the Electrical symbols, catalogue and control drawing of PLC and M.N.S low voltage distribution system leading to trouble shooting.
19) Installation of limit switches, local control switches emergency stopper on timer off timer and tachometer with proximity switches for motors.
20) Worked on H.T panels, thyristor control D.C panels, control; and signa
ling devices, transformers protection system and electrostatic precipitator
21) Practical experience in fitting and cleaning of carbon brushes of H.T motors. And maintenance of liquid rheostat.
22) Practical calculation of cable size, laying and connecting the power and control cables &connecting complete network of earthing system.
23) Connecting power, control circuit and maintenance of generator circuit breaker, isolator and grounding switches of 325 MWe generators with its logic diagram.
24) Connecting power, control circuit and maintenance of Diesel Generator up to 3.2 MWe
25) Operation from cold standby to hot standby and hot stand by to cold stand by of UN-interrupted power supply (U.P.S) 220V & 220V D.C with trouble shooting of its control wiring.
26) Understanding the programming of motor protection relays SPCJ4D34, SPC J4D29, over current and earth fault relays.
27) Operation and maintenance of 220 KV&132 kV gas insulated switchyard with its specialized compressed system.
Operational EXPERIENCE
a)Knowledge of all aspects of process engineering including material and energy balance, PFD, P&ID, cause and effect diagram, data sheets and material selection.
b) Sizing calculations of pipelines and associated equipment including tanks, vessels, separators, control valves, relief valves and pumps.
c)Must have a demonstrable ability to provide top class engineering deliverables, as directed by the Project Study lead, without constant supervision.
d)Knowledge of environmental impact assessments, loss prevention, fire risk assessment.
e)Familiarity with international codes, standards and engineering practices..
f) Must be familiar with all aspects of design from concept to detailed design.
g) Must be familiar with commissioning procedures.
h) Must be able to contribute to technical proposals.
i) Technical analysis of engineering problems.
J) Report writing skills.
k) Must possess strong interpersonal skills to be able to coordinate in a multi disciplinary environment.
l)Resourceful in researching for technical knowledge.
m) Be able to motivate and provide technical guidance to a team of engineers.
n)Ability to communicate with senior management.
O) Ability to communicate with, and develop long term relationships with clients.
p) Single / Multi-Phase hydraulic analysis software (steady state and transient).
q)Process simulation software.
r)Experience in the following areas : oil and gas, gas processing, chemicals, refining, petrochemicals and utilities
t) Experience of Absorption type lithium bromide chiller (1755 ton/hr), and compression type chiller (500 ton/hr).
u) Operation of different centrifugal pumps ranging from .1 Mpa to 20 Mpa.
v) Operation of diesel engine driven pump
w) Operation and control of all types of isolation and regulating valves including motorized, pneumatic and hydraulic valve.
x) Isolation of equipments for maintenance etc.
y) Working with different types of filters, mix beds, strainer, heat exchangers, condenser and tanks.
z) Control of sampling system
a1) working with high pressure steam (6.5 Mpa), Component cooling water and liquid of different chemistry
b1) Experience of diminerelized water treatment plant (90 ton/hr)
c1) Handling of different industrial & radioactive gases
d1) Preparation & handling of Boric Acid solution
e1) Acid & Caustic solution preparation and their use in different system
f1) Panel control of different systems and field work
g1) Good communication skill
h1) Maintaining log book, data sheets, surveillance sheets and document record
i1) Working experience of startup, normal operation, trouble shooting and shutdown condition of plant
j1) Handling of different Chemicals main feed water chemistry
k1) Good knowledge of operating steam turbine generating units, boilers, condensers and associated auxiliaries
l1) Responsible for monitoring and controlling large steam /combined cycle power plant generating units & associated auxiliary equipment.
m1) Diagnose and resolve day-to-day operational problems and handle all type of operation emergencies.
n1) Perform high/medium voltage switching operations.
o1) Prepare work orders and daily operation report for generating units
1.Turbine Operator
1) Operation of turbine and its auxiliary systems such as condensate system, Feed water system, and turbine lube oil system, and turbine gland seal system etc.
2) Fully involves in the plant start up, plant normal power operation, power reduction and handling all types of transient in all phases of plant.
3) System Line up, Isolation, normalization & Priming Of systems.
2 : Diesel Generator Operator
Working as Diesel Generator Operator in CHASNUPP on 3.2 MWe (3sets) D.G station and gain control room and D.G sets experience having the following systems :
a) Fuel oil system
b) Starting air system
c) Cooling water system
d) Air intake & exhaust system
e) Lube oil system
f) Electrical systems
i. Relaying panel alarming panel
ii. Alarming panel
iii. Synchronizing panel
iv. D.C auxiliary panel
v. Regulation panel
vi. Protection panel
3 : Compressor Operation
Worked in compressor station as operator on two-stage, double, Reciprocating compressor of L-type, I-type and centrifugal Compressor.
4 : Pump House Operation
Work as pump house operator for the cooling system of equipment.
5 : Chiller Operation
Worked on the operation of vapor compression chiller and lithium bromide chillers

Suitability
·1 Fully versed in operating all types of fire extinguishers.
·2 I can well understand the instrumentation and control diagrams.
·3 Good communication skill.
·4 I am fluent in English read and write, and also Urdu.

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4889593
Date & Time : 22nd Nov 2011 12:22 PM (UTC)
IP Address : 141.0.8.156
Browser Info : Opera/9.80 (Windows NT 5.1; U; en) Presto/2.9.168 Version/11.52
Predicted Country []: United States

[Guest]

RESUME
G.KARTHIKEYAN
Email ID : karthikeyangks AT gmail.com
PROFESSIONAL OBJECTIVE
To work in creative and challenging environment, to utilize my knowledge and teamwork capabilities,
a friendly environment and has an excellent growth potential.
COURSE
INSTITUTION
YEAR OF PASSING
PERCENTAGE
B.E (Electrical and Electronics Engineering)
SSM College Of Engineering, Komarapalayam
2010
67%
DIPLOMA
In
(Electronics and Communication Engineering )
Sri Ragavendra Polytechnic College,
Komarapalayam
2007
70%
H.S.C
Govt Boys Hr Sec School ,Anthiyur
2005
72%
S.S.L.C
Sakthi higher Secondary School,
Nachimuthupuram.
2003
58%
ACADEMIC PROFILE :
ADDITIONAL QUALIFICATIONS :
Completed a course in Automation PLC & SCADA.
Completed a course in MATLAB.
Operating System in Windows XP,2000.
Computer Language known C,C++,JAVA.
AREA OF INTEREST :
Power Electronics,
Electronics Circuits.
PROJECT DONE :
Diploma Project : Power Failure Indicate to the EB Office.
.
Engineering Project : High Power Factor Soft Switched Boost Converter.
IN-PLANT TRAINING
Bharat Sanchar Nigam LTD in Erode.
Sakthi Sugars Limited in Sakthi Nagar.
STRENGTH
Good Team Player.
Hardworking, Sincere, Easy to move in any Kind of situation.
Comprehensive problem solving abilities, willing to learn anything

[Guest]

Curriculum Vitae
Pappu Lal Yadav
Academic Qualifications
M.B.A (Marketing); NBA School of Business, New Delhi
Gradation (Arts) from Rajasthan University, Kaladera Jaipur
10+2 (Arts) Ajmer Board Jaipur
10th from Ajmer Board Jaipur
Work Experience 2.2 Years-Territory Sales
Market Developer Executive (Key Accounts);Hindustan Coca Cola Beverage (HCCB)
Nov ’2011-Present
- Assisting the Key Accounts team in order acquisition, timely order processing by following up with involved parties
- Ensuring High Share of Visible Inventory(SOVI) and Successful Activation
- Collection of Outstanding Payments and providing After Sales Service hence ensuring Customer Satisfaction
- Manage the visibility & availability in Outlets.
- To Maintain Relationship With the Existing Clients Network.
- Enhancing the Sales Volume through the Relationship

Sales Executive; Rajdhani Group. (Victoria foods Pvt. Ltd.)
Jan’2010-
Oct’2011 - Tapping new sales opportunities in the market
- Order acquisition & processing
- Leading the promoters to monitor promotions on products
- Visiting the Retail & Departmental Store.
- Ensuring timely & proper delivery of Goods.
- Collecting & Analyzing data and using the same to generate reports
Internship Training; Cream Bell (Devyani Food Industries Pvt. Ltd).

- Surveyed on Conflicts between Distributions and Retailers
- Conversion on new Retailers’ Outlets
- Collecting & Analyzing the Data
- Preparing and Checking the Reports
Technical Skills
Diploma in Computer Hardware & Networking
Declaration
I do hereby declare that all the information furnished is true to the best of my knowledge.
Date :
Place : New Delhi
Pappu Lal Yadav

[Guest]

UDHAYAKUMAR M
dhaya2026 AT gmail.com
OBJECTIVE :
To expose myself with a challenging work in an industrial environment. And enhance my skills and capabilities in order to be a complete professional
HIGHLIGHTS OF QUALIFICATION :
- B.E (EEE) from Karpaga Vinayaga College of Engg & Technology(Year-2010). With 60%
- Determined and industrious with excellent communication skills
- Believe in continuous learning and development
- Flexible to work effectively under pressure in different environments.
- Responsible for maintaining good team spirit & develop interpersonal skills.
SOFTWARE SKILLS
- Database Known :SQL,MS-Access,
- Operating System :Windows 2000,XP
.
PROJECT DETAILS :
TITLE :
AUTOMATION OF ESP RAPPING MOTOR USING REAL TIME
CLOCK WITH REMOTE ANNUNCIATION
DESCRIPTION :
- .The Embedded device communicates through sensor, which makes it accessible from anywhere through by remote access built into the embedded device.
ACHIEVEMENTS :
- Organized a National Technical Symposium in college.
- Attend Symposium in other Colleges & won II place in Quiz
- Won II place in cricket college intramural tournament at Karpaga Vinayaga College Of Engineering & Technology
STRENGTH :
- Can work under pressure
- Can Communicate easily with others
- Workholic
EDUCATIONAL DETAILS :
- HSC passed in first class, with 57% from Sri Ramakrishna Mission Vidhalaya Boys Higher School in (Year-2006)
- SSLC passed in first class, with 67% from Sri Ramakrishna Mission Vidhalaya Boys Higher School in (Year-2004)
.

[Guest]

THANUJA. S, M.B.A., CA (Final)
Email : thanuja_ca AT yahoo.co.in
Career Objective
- To work in a progressive organization that incorporates varied spectrums of work & diversity, this endows consistency, competency & expertise in professional as well as social spheres, enabling collective excellence and technical growth, personal fulfillment with welcome attitude for new ideas and concepts to enhance the overall growth of the organization.
Summary :
- Highly accomplished professional with 3 years of experience in auditing and taxation.
Professional Experience :
T.K. Thanthoni & R. Ramesh, Audit Firm, Salem.
- Article Assistant from Mar. 2009 to Mar. 2012
Statutory Audit
- Verifying with Accounting Standards
- TDS Processing and compliance authentication
- Audit on Internal Control aspect
- Physical verification of cash and asset
- Financial Statement preparation
- Ageing analysis
Tax Audit
- Expenditure Disallowances under IT Act
- TDS Payments
Internal Audit
- Streamlining of account heads
- Cash fraud detection
- Prevention of asset classification errors
- Auditing Service Tax
- CST claim verification
- Stock Verification
- Audit Reporting
Bank Audit
- Compliance with provisioning norms
Export Certification Audit
- Verified EPCG authorization

Work Experience
- Worked as a Senior Process Associate in CAPGEMINI BUSINESS SERVICES P.LTD, Salem
for 1 Year & 4 Months (Nov. 2007 to Feb. 2009)
- Processing the Client’s invoice especially Accounts Payable in the workflow designed at the background of SAP & MFG PRO.
Academic qualification
- Completed CA - Inter in Nov. 2008
- Written CA - Final in May 2012 and awaiting for the results
Course
Institute
Board/University % of marks
Class
M.B.A (Finance) Periyar University Periyar University, Salem. 73% I Class
B.Com A.V.S. College of Science Periyar University, Salem. 74% I Class
H.S.C Bala Bharathi Matriculation School, Salem Matriculation Board 81% I Class
S.S.L.C. Bala Bharathi Matriculation School, Salem Matriculation Board 68% I Class
Computer Knowledge :
- Basic Knowledge in Computer
- Windows XP
- MS-Office
- Tally 9
Declaration :
I hereby declare that all of the above given particulars are true to the best of my knowledge and belief.
Thanking You,
Yours faithfully,
Place : Chennai (Thanuja S)
Date :

[Guest]

I am Narasimha. Please tell me about the job vacancies.

@Narasimha:
To Know the current openings in Madras Cements Ltd, you may contact the company using the below link which has contact address
http://ramcocement.in/contact-us.aspx

[Guest]

I am doing my final year in Electrical engineering. May i know what is the recruitment process for Madras Cements and what i have to study for that (i.e) the syllabus. Can you please suggest me?