www.eicherengineeringsolutions.com Eicher Engineering Solution Gurgaon : Hypermesh Optistruct FEA Crash Analysis Radioss Hyperstudy

[Admin]

Eicher Engineering Solution
http://www.eicherengineeringsolutions.com
eicherengineeringsolutions.com

Keywords: Hypermesh, Optistruct, FEA , Crash Analysis, Radioss, Hyperstudy

Company Profile
Established in 1959, The Eicher group was pioneer in manufacturing tractors in India. The playing field increased gradually adding commercial vehicles and motorcycles to the product portfolio. Eicher products are known for their Quality and Customer Orientation. Design, Engineering and Manufacturing of Automotive products forms the competency ground for Eicher.

Eicher Engineering Solutions was established by a team of well-qualified Engineers possessing expertise in their respective areas of Design, Engineering, Design Verification & Test Simulations to support in-house and External Clients for Design & Developmental purposes. Today we are a 140 member team with offices in Gurgaon (India) & Detroit (US) with a long list of satisfied clients across the globe Knowledge and experience, acquired over a period of more than 4 decades, in live product development environment, is our offering to clients. Our team functions as a seamless extension of Design Centers of our clients. We help our customers to substantially reduce product development time and achieve cost reduction.

With our engineering components division we also provide a unique integrated design and build offering to our clients giving them the dual benefit of high quality engineering and low cost manufacturing.
Services ranging from Concept Design, Simulation, Application Development, Design & Development of Virtual / Real Test Rigs to Prototype Manufacturing & Testing, identifies Eicher Engineering Solutions as the One Stop Shop for Outsourcing of Engineering Services.
EES provides services in the areas of:
Class A surfacing and B side design
Driveline Design
Component/Aggregate Design
Finite Element Analysis
Virtual Prototyping
Multi-body Dynamics
Crash Analysis
Accelerated Testing and Design Evaluation / Validation
PDM / PLM Technology for Business
Digital Manufacturing

Lead Engineer(CAE)
Experience: 2 - 6 Years
Location: Gurgaon

Job Description
Candidate should have experience of Meshing in Hyper mesh.
Experience of FEA & crash analysis in Radioss for automotive structures would be a plus.
Candidate should have knowledge of Optimization using optistruct / hyperstudy.
Sound theoretical knowledge and its application
Good communication skills

Desired Candidate Profile
Candidate Should be BE/Btech/M Tech with Minimum 2 years of relevant years of experience
Experience of Crash analysis for truck cabins / passenger seats
Experience of Crash analysis in Ls-dyna would be preferable.
Candidate should have experience of Meshing in Hyper mesh.
Experience of FEA & crash analysis in Radioss for automotive structures would be a plus.
Candidate should have knowledge of Optimization using optistruct / hyperstudy.
Sound theoretical knowledge and its application
Good communication skills

Email Address: careers.ees@eicher.in

[Guest-IJT]

Dear Sir,

Please find the attached resume herewith.
B.E Mechanical Engineering throughout with 1st class
Total YRS of EXP: 21 months
currently working in J K Automation as a Business development & senior design engineer
Work EXP: R&D - Design (21 months)
CAD Software: CATIA V5R16, Solid edge V18
Current CTC: 2.5 Lacks per Annum
Expected CTC: 3.5 Lacks per Annum

Thanks & Regards,
T.S.Sharma
9890109303

Resume:-
TUSHAR R. SHARMA
Communication details
Mobile: +9109890109303

Tel No.: +919561124367
E-mail: tushar1013@yahoo.co.in
Permanent address :
Sai Puja Baug,
Flat no 11 ‘A’ wing,
Opp. Ursulla school,
Akurdi, Pune-35

Career Goal
To secure a challenging job as a Development & Design Engineer in a dynamic organization where my skills, experience and knowledge of wisdom will excel towards growth and success of organization.
Personal Attributes

Willingness and ability to quickly learn new technologies have helped me to develop my confidence in whatever I do and enthusiasm to work under all situations.

Professional Experience
Total ‘21’ months of experience in Designing & Technical co-ordination for various projects.
Projects:Some of the prestigious projects are given below for J K Automation:-
Design ,Technical application for manufacturing support, Client coordination

Current project: - Currently Leading project of Tata Ficosa for VW ORVM assembly line. Project includes six stations of different assembly in which critical design solutions were provided, Was responsible for direct coordination process designers of Ficosa International Spain.
D.D. Engineers:- June 08 to June 09
D.D. Engineers is one of the major suppliers of Dies, Jigs & fixtures to TATA Motors, Volks Wagen & Gm.
Key Role:- Trained in software of CATIA V5 & Designed various fixture for TATA group & GM.
Some of the jigs included bumper jigs, jigs for engine, die material for sheet metal press etc…


Training details:-
Project work:-
The project training was done in HAL (KORAPUT DIVISION), Department of design for one month dated 25-03-08 to 23-04-08. The title of the project “DESIGN APPRECIATION OF TURBINE MODULE IN A GAS TURBINE ENGINE”.

Project details: -
This project on Aerofoil blade design and turbine is defined on the basis of T6 basic British profile of a single crystal blade as its prime aspect.
General parameters of turbine and its inlet and outlet parameters are discussed in brief, Common causes of failure of the assembly/material, case studies and its effects on the performance of the engine which is necessary in developing the first stage of blade design. General constructional aspects of a turbine in an AL31fp engine of Sukoi MK 30 I aircraft are also discussed.
Calculations of each Temperature profile & blade designing are intensely done. Calculating Tip, mean, root velocity by using velocity triangle method has concluded in satisfactory results.
Various methods of blade design such as ‘KUZMIN’ method, Lemniscate’s method & other Non-Conventional method are also given with suitable examples.
At last the procedure for development of Aerofoil section is drawn using auto-cad and 3D representation of the Aerofoil blade is drawn.

IMPLANT TRAINING:-
Implant training for four months was done in AIR INDIA LTD, which was from 28/8/07 to 27/11/07.
This training was divided into 3 groups. The details are as follows: -

COMPONENT OVERHAUL DIVISION: - 28/08/07 to 21/09/07
C.O.D division is the oldest division in AIR INDIA LTD. it contains four main departments, which are Structural group {SR Gr.}, Undercarriage group {UC Gr.}, System group & fan case. The main purpose of the department was to maintain and repair the whole aircraft structural part. As a trainee our job was to assist and support maintenance engineers as per the specification of their work.
MAJOR MAINTAINANCE DIVISION:- 21/09/07 to 27/10/07
The main purpose of major maintenance division is to remove and repair different types of aircraft structure from hangers and send it to various departments for dressing and repair work. It included various activities like cockpit cabin, engine down, wing inspection, landing gear etc.
It was divided into two main departments:
* Airbus ‘A’310-300:-
* Boeing: - ‘B’ 737,747,777

POWERPLANT OVERALL DIVISION: - 28/10/07 to 27/11/07
The main purpose of power plant overhaul division is to maintain and repair engines of various commercial aircraft. The division was divided into two main departments.
* Airbus 310-300 {CF680C2} Engine specialization
* BOEING ‘747’ P&W {PRATT & WITNEY} Engine

Trainees were only allowed to observe and study in the above division.
Training in CAD from Apollo technologies for four months.


PLACE: PUNE (INDIA).

DATE: TUSHAR SHARMA

[Guest]

CURRICULUM VITAE

Pawan Kumar
Email Id : yadav.pawan99 AT gmail.com
Profile
- Eager to contribute to the growth of a progressive company with quality services, developing skills to achieve professional success in the corporate world at the same time.
- Good interpersonal communication and team worker.
- Highly motivated, confident, strong work ethics and ready for relocation.
Objective
To achieve a position in the professional field that will enable me to prove my managerial and inter-personal skills together with my ability to quickly acquire new skills so as to provide opportunity for further growth and advancement to the organization and self.

Academic Qualification
Institution Board/University Examination Year %Marks
Gurgaon College Of
Engineering M.D.U MBA
(Marketing & HR ) 2008-10 62%
Ahir College,Rewari
M.D.U ,Rohtak B.Sc,
(PCM)
2008 52
Skills
- Office Suites : MS Office
- Internet surfing and downloading.
Languages Known

- English - Can Speak, Read & Write
- Hindi - Can Speak, Read & Write
WORK EXPERINCE :-
Working with AMMD (Agri Machinery Marketing Division)In Escorts Pvt. Ltd. Since 06Sep.-2010 As a Project Officer In Indore (M.P.)
Summer Training Attended
Project Title : Competency Based Interview Techniques”Non Technical Aspect” In
“AMTEK TEKFOR AUTOMOTIVE LIMITED DHARUHERA”
Project Title : Employee Satisfaction Regarding Existing Training Method
Hobbies
- Playing cricket .
- Listening to music.

- Going out with friends.
Industrial Visits
Omaxe Auto Limited, Dharuhera
Amtek Tekfor Automotive Limited, Dharuhera
TRAINING;: The Training Has Held To Times At EIFM (Bangluru) ESCORTS INSTITUTION FARM OF ME CHANIZATION From 11Oct To 16Oct & 16 May To 21 May