www.mstcindia.co.in Recruitment 2012 MSTC Limited : Management Trainee

[muthukalee]

Name of the organisation : MSTC Limited ( mstcindia.co.in )
Name of the post : Recruitment for Management Trainee in 2012

RECRUITMENT FOR THE POST OF MANAGEMENT TRAINEE

NO. OF POSTS : MANAGEMENT TRAINEE GRADE : E-0 10 POSTS

SCALE OF PAY : `E-0: 12,600-3%-32,500 (Min. gross pay `28,000/- per month)

http://www.mstcindia.co.in/MSTC_Stat...rs/careers.htm
http://www.mstcindia.co.in/MSTC_Stat...9_Jan_2012.htm

MINIMUM QUALIFICATION : A Bachelors Degree in Science/ Commerce/Arts/Law/Engineering/Information Technology/ Management from recognized University/ Institution of repute, preferably with an MBA/PGD in Marketing/International Trade/Materials/HR/Logistics. Applicants must have at least 60% marks throughout their academic career. However, candidate having min 55% marks in Honors/Masters/ Engg. Degree with 60% marks in all other pre-degree examinations will also be eligible. Relaxation of 5% in marks will be given to PWD candidates.

EXPERIENCE : Fresher whose results are awaited need not apply.

AGE : 28 years as on 31.12.2011. Relaxable for PWD candidates by 10 yrs.

HOW TO APPLY :
* Interested candidates may apply in the prescribed format attached herewith along with one recent passport size photograph (pasted in the box).
* Supporting documents should be enclosed for Date of Birth, Caste, Disability (If applicable) & qualification.
* Persons applying for the post of Management Trainee must enclose a Demand Draft of Rs.300/- drawn in favor of MSTC Ltd, payable at Kolkata. SC/ST & PWD candidates need not send any Demand Draft. No other mode of remittance will be accepted.
* Persons working in Govt/PSU should apply through proper channel.

Completed application in all respects should reach
“The AGM (P&A),
MSTC Ltd.,
225C, AJC Bose Road,
Kolkata 700020”
superscribing the name of the post on the envelope within 15 days of publication of the advertisement.

Last date of receipt of application is 11.02.2012.
Queries, if any, may be addressed to careers@mstcindia.co.in. Please appreciate that only such queries would be replied which are relevant and have not been addressed in the above advertisement. Also, applicants are requested not to send any query which is not connected with the vacancies advertised herein.

[yogeshsinghal86]

Yogesh singhal
Email : yogesh_22may AT ymail.com
Objective :
Seeking a challenging and growth oriented career with competence and knowledge and to become an asset of an organization by giving the best to which can help in the growth and promotion of the organization.
Education :
- B.A.in Political Science & Geography from M.D.University, Rohtak, Haryana in the year 2005-08.
- M.B.A. from G.I.T.M. bilashpur, (Gurgaon) Affiliated with M.D.University, Rohtak. (2009-2011-Pass Out)
Experience :
Working in coronna icm pvt. Ltd. As an recruiter trainee from last three months . That is a RPO
Firm.
My job profile is recruiting the candidate for the other organization. I am using some porter like timesjob.com & Monester.com. Through them I do select the right candidate for the right job.
PROFESSIONAL QUALIFICATIONS
Degree/Certificate Institute/ University Year
MBA (Marketing with HRM)
Gurgaon institute of technology & management, gurgaon
Affiliated by maharashy dayanand university, rohtak
2011
EDUCATIONAL QUALIFICATIONS
Degree/ Certificate Institute/ University Year
Graduation ( Arts) Kishan Lal Public college Rewari, affiliated to Maharashi Dayanand University Rohtak. 2008
Senior secondary(Arts) C.B.S.E , New Delhi 2005
Matriculation C.B.S.E , New Delhi 2003
PROJECTS UNDERTAKEN
2 month - Summer Internship Project (During MBA)
Organization Tata indicom pvt ltd. delhi
Project Title Market strategy of tata indicom
Tata indicom pvt ltd
strength :
- Good Communication Skills.
- Can handle any confidential assignment with a sense of responsibility.
- I have capacity to learn.
- Positive Attitude
Computer Proficiency :
- MS-Office, MS-DOS, Internet
Hobbies :
- Watching Cricket and Chess.
- Listening Music
- Interacting with new people.
Language Proficiency :
- English & Hindi
Mission :
- Committed to achieve complete satisfaction of customer and company’s objectives towards growth

[Guest-IJT]

Name : umashankarv
Email : infous2005 AT gmail.com
Designation / Skillset : QA QC Head / Manager
Greetings,
Dear Sir,
I am interested in exploring career opportunities as Manager / Head QA QC Function with your company and have therefore enclosed my CV for your reference. Should you be searching for a results-oriented Quality professional for your firm, I would encourage you to consider my credentials.
As my CV indicates, I have 19 years experience in QA QC. the breadth of my expertise covers a wide area of responsibilities. I am a hard working, ambitious leader and motivator of people, recognized for flexibility, adaptability and for a high degree of expertise in the Quality Assurance field.
My day-to-day output reflects a high level of motivation, efficiency and ability to meet any objective. I have a proven ability to troubleshoot, perform under a minimum amount of supervision, and demonstrate a high degree of initiative and good judgment.
I feel confident that an interview with you would affirm that I would be an excellent team member and an asset to the company. When could we meet-
I can be reached at 9600162099 to arrange for an interview at a convenient time.
Best Regards,
V Umashankar

Resume :
Vision : Continuous search of excellence
- Mission : To Be a part of Organization in Senior Position through career success & positive mental attitude
- Objective : Head QA QC Manager, Welding Inspector, NDT Manager & QMS Management Representative Cum ISO Internal Auditor.
Academic Education
- Mechanical Engineering Diploma, DME
- Bachelor of Business Administration, BBA
- (Master of Business Administration, MBA ).
Professional Membership
- Member of American Welding Society, AWS
- Life Member of Indian Society for Nondestructive Testing, ISNT
- Life Member of Quality Circle Forum of India, QCFI
Education ( Professional )
1. Certified Welding Inspector : American Welding Society, Valid till 2014
2. Level I Ultrasonic test (UT) : ASNT, Valid till 2015
3. Level II Radiography Test (RT) : ASNT, Valid till 2015
4. Level II Magnetic Particle Test (MPT) : ASNT, Valid till 2015
5. Level II Liquid Penetrant Test (PT) : ASNT, Valid till 2015
6. Level II Visual Inspection (VT) : AWS CWI
- Internal Auditor ISO 9001 : 2009 and ISO TS 16949:2008
- Soft skill : AutoCAD, Minitab, Engg. / Welding Drawings, GD&T
Potential
- Ability to head QA QC Heavy Engg Manufacturing, Welding, NDT.
- MR & QMS Internal Auditor ISO TS 16949 : 2009, ISO 9001: 2008
- Capable to lead / develop an Organization as Consultant
- Areas of expertise include : welding process application, spec., standards application, production engineering and QA QC.
Strength
- Quest for Discipline, System, Innovation, Time management
- Flexibility, Adaptability, Prompt decision making, Profit maxizer..
I have more than 19 years experience in QA QC, Inspection, NDT & Welding, Painting, Management Representative for ISO 9000, ISO TS 16949, Quaility Pillar Leader in TPM / Six Sigma Project and Quality Circle in Heavy Fabrication Industry, Oil & Gas industry in the field of Quality Management & Control related activities. I have experience in inspection of Piping, Pipeline, Tanks, Pressure Vessels, Structural steel and all non-destructive and some destructive testing. I am able to Quote & access to most of the international codes & Standards such as ASME, AWS, ASTM & API.
Out of which around Three years as Head QA QC / NDT/ ISO for newly started Automobile Heavy manufacturing and fabrication Industry and Cumulative of 10 years in above Industry at Mother plant in various Position in QA QC (From Sep 2000 to Feb 2011)
From May 1992 to April 2000 Around Nine years experience in the following Industries
QAQC in Root level new start up projects of refineries, gas plant, petrochemicals.
- Onshore surface and subsurface infrastructure like RIGS, DECK, RISER TOWERS, FLOWLINE, PIPING and MANIFOLD
- GSLV, PSLV Rocket aerospace hardware welding, Casting, Forging, Plates, Wind Turbines, Automotive Earthmover
- Construction of piping for petroleum oil gathering and distribution system between stations.
- Construction of station piping for the dilution, desalting, water separation and degassing of petroleum.
- Construction of piping for petroleum oil gathering wellhead & flow line at oil field.
- Corrosion monitoring periodic inspection & in-service of Ship vessel, oil field and related equipments like plant, piping, pressure vessels, body and fuel storage tanks.
Performance and Path Till date
WELDING PROCESS QA QC NDT RELATED ACTIVITES AND RESPONSIBILITIES
- ISO Management Representative , QA QC Functional Head, Heavy Fabrication Company
- Responsible for time to time monitoring and surveillance of welding activities for SMAW, SAW, FCAW, process for the fabrication of CS material in Fabrication shop and Field and Witnessing of NDT activities such as UT, MPT, LPT as per ITP & QCP and review of all documents
- Prepare, Establish, Review and approve Non Destructive Examination (NDE) Procedures in order to confirm as per project specification and relevant International Standards and co-ordinating, Witness, evaluation and interpretation of NDT techniques like RT, UT, MT, & PT. Co-ordinate with NDT personal and making arrangement to complete the job in time.
- Conducting, Organizing ASNT NDT Level I & II training program and qualifying NDE personnel in accordance with SNT-TC-1A.
- Knowledge of Steel Welding NDT, control of non conformities, review of welding data books, witness of hydrostatic tests, issuance of punch lists, pre commissioning inspection of mechanical items, issuance of acceptance reports etc.
- I have experience in coordination with Client Inspectors for various inspection activities as per Quality Control Plan. I was responsible for review of WPS and witnessing the PQR test and Welder Qualification test for steel and Polyethylene Line, Fusion Visual Inspection, various Bend Tests and preparation of reports as per quality control plan and procedures.
- Monitoring and surveillance of dimensional checks of tanks such as Peaking, Banding, roundness, levelness and Plumbness checking in every stage of erection in Storage Tanks to ensure that the tolerance are meeting as specified in the applicable code, standards, and Client specification.
- Monitoring and Witness for the Vacuum Box Test for Tank Bottom plate lap joints, Oil penetrant Test for Tank Corner joints & Pad leak test for Nozzles.
- Monitoring and Random Witness for Settlement Reading on each stages of Water filling for Hydro Test of Storage Tanks by instrument like optical Level.
- Detecting the unacceptable trends, before, during and after welding and after confirmation with procedures and Specification, initiating corrective action.
- Monitoring and surveillance of pipe line activities such as stringing, welding, lowering, tie-in, coating, holiday test, pigging and hydro test.
- Interpreting the RT films and approving accepted and rejected joints as per B 31.3, B 31.1(piping), API 1104 (pipe line) and API 650 for storage thanks
- Time to time monitoring and surveillance of welding consumable control such as reviewing daily log book, batch no against electrode, temperature control for drying oven and heating ovens and quivers.
- Review of test packages and line check for pipe line, piping, tanks and punching out the lines before Hydro test.
- Monitoring and surveillance of different type of pipe line inspections as per QCP such as reviewing of RT filims, Drawings, Material certificates, WPS, QC Procedures.
Witnessing of Welder qualification, PQR, Installation of pipe lines under Roads and Rail cross, Pipe line lowering, Holiday test before lowering of pipe line and Hydro test.
- Attending QA/QC weekly meeting with and contractors’ QC team for discussing unacceptable problems and propose solutions.
- Preparing and implementing SOP, Control plan, Inspection Test Plan and Method Statement for various activities involved in the Heavy Fabrication, construction of Petrochemical Plant as project specification & relevant International Standards and getting approvals from the client.
- Leader in conducting Quality Audits, Internal QMS Audit, finding the Non conformities and suggesting corrective action to resolve.
- Able to Perform Welding Procedure Qualification Record (PQR) in case of variation in the essentials variable with existing PQR, as per international standards and additional requirement of client.
- Able to Perform welding Procedure Specification (WPS) with relevant qualified PQR for particular projects
- Able to Perform Welder Qualification Tests for various welding procedure specifications as per ASME section IX and ASME B31.3, API 1104, AWS D1.1 etc.
- Coordinating with client inspection dept. at various stages of fabrication activities & getting approval.
- Able to access with International Codes like ASME section II, V, VIII, IX, ASME B31.3,AWS D1.1, API 1104,API 650 , ISO 5817, API 5L etc.
- Responsibility includes monitoring performance appraisal of QC inspectors.
- Coordinating with Material Controller for Incoming Inspection of varies steel materials, consumables, tools and equipments etc. with relevant documents like material test certificates. If required performing mechanical test and chemical analysis in order to confirm as per project specification and relevant International Standards.
- Carrying out the welding inspection before, during and after welding operation as per approved test plan, relevant engineering drawing, international standard and project specification
- Welding inspection of various piping materials like low temperature carbon steel, stainless steel, internal coated piping using with coated sleeve pipe which protects the corrosion of weld area.
- Witness the tests as per project procedure.
- Carry out inspection and evaluation of fitness with third party and obtained final acceptance.
- Maintain the latest version of all contracts documents, drawings, specifications and standards.
- Coordination in Calibration & documentation of measuring instruments, gauges & equipments etc.
- Inspection and witnessing of cathodes protection system used in the onshore facilities, which includes piping system, pipeline, and storage tank etc.
- Responsibilities including monitoring Traceability of Materials and Welded Assembly , coordinating all relevant departments, in order to get final material traceability report.
- Preparation of Test Packs individual system wise, which includes material certificates, welding history records, NDT reports, equipment & installation and alignment report, compiling sub – contractors documents, coating reports, hydrotest reports, pneumatic test reports, pressure test reports etc, and getting client’s approval.
ISO QMS HEAVY ENGINEERING MANUAFACTURING RELATED
Formulating and implementing Quality Management System focusing towards TPM Excellence Earthmoving Wheels manufacturing facility.
Job Description
- Establish and manage procedures to safeguard the quality of the product
- To lead assembly workshop in-process quality control.
- To lead receiving inspection per established standards and plans.
- To report the inspection results and segregate all non-conforming products for disposition.
- To give feed back of inspection results and all other necessary information to management team as well as to shop floor process owner.
- To monitor CAPA taken to eliminate defects.
- To establish ISO 9000, ISO TS 16949 systems in the plant.
- To conduct product quality audits, Layer process Audit
- To conduct subcontract quality audit, Sustainability reporting
- Maintaining and adhering to Quality assurance plan, adhering to safety norms and maintaining near zero accident (major/minor) and following environmental regulations

Duties & Responsibilities :
- Quality functional head in Earth mover Wheels manufacturing 70% Export unit.
- Leaded Manufacturing Quality team members for five process lines
- Safety member targeting zero incidence to eliminate Accident at shop floor
- NDT In-charge for Dia 49”, 35” 25”, 6 to 18 mm Thickness , low Carbon steel Cir.Seam Square groove butt, Double “U” groove, “V” groove submerged welding and Fillet SAW, MIG Process
- Quality pillar coordinator in TPM, Total productivity maintenance under the guidance of Mr. Kawashima san, JIPM, Japan. ( Attended Lectures / training for 36 man days )
- Six Sigma member in Black belt project and Green Belt Project.
- Facilitator and Leader in Quality Circle, Member in Cross functional team
- Project member in bringing down Scrap PPM and other Quality Improvement activities as chartered in the Business Objective.
- SAP ERP Quality module member.
- Ensure the Inspection activities are being done by the designated Engineers / Inspectors and educate New comers to Competence Qualification skills
- Review and verify of Inspection and Internal Audit documents.
- Understand Project Specification given by the Client to check for all Inspection Requirements
- Coordinate with Design, Tools, Planning, Production, Maintenance and Safety for smooth flow of each and every Quality functional activities
- Release and issue materials for respective process say - Machining, Forming, Rolling, Spinning & fabrication after Quality check for fit up and fabrication activities
- Ensure Calibration validity of Inspection Equipments and Gauges
- Introduce Error Proofing POKA YOKE for Production Processes that detect or prevents Defects from occurring during manufacture to achieve defect free Parts
- Quality Planning and arrangement of resources for QC Inspection.
- Vendor development for out sourcing activities and train the sub-contractor for performing the Quality work
- Ensure, maintain quality at Receiving, In process, Final assembly and PDI.
- Conducted Daily meetings and weekly meeting with the Engineers / Inspectors to have clarity in their role to play on their daily activities
- ISO 9001 :2000 documentation activities (Updating the manual, Process flow module / Procedures and Inspection instructions, SOP).
- Preparing Corrective and Preventive action in 8D Report and pro-active action for process improvement by means of Error proofing, Poke-Yoke, Kaizen, QC, Brain storm
- Responsible for Audit of Process as per Input / Output quality metrics.
- Preparing and updating Control plan for new and existing product
- Controlling customer rejection below 100 PPM by CAPA activities
- Painting process quality improvement and quality assurance activities.
- Conducting final product and layout inspection
- Coordinating with new product development as a CFT member
- Managing In-process quality assurance activities
- Pre delivery inspection – PDI Authority
Preparation of QMS Document like
Level 1 - Quality policy and Quality manual
Level 2 - Quality procedure manuals, Process maps and Customer specific Requirement manual
Level 3 - Work instructions Department manuals/Inspection instructions/ SOP /Product Drawings/Specification /Process and Tool layout/tool drawings, specification sheets, Design & Process FMEA, control plan, Process flow chart
Level 4 - Other documents (Records) Master list, Formats, Tags etc
Customer Complaint handling Corrective & Preventive Action-8D Report
Problem Solving Tool – New 7 QC, DOE, Error Proofing in Process, Inspection
Compliance with Statistical Control Requirements - SPC :
- Data collection from control chart and doing potential & performance process capability studies. (Cp & Cpk)
- Preparing control chart using various quality indices & calculating control limits
- Problem solving using 7 QC tools & 5W 1H technique
- Doing initial process capability studies (ppk)
Active Participation in the following Team Activities :
- Developing process Failure mode & effect analysis - PFMEA
- Advanced product Quality planning process while new product development-APQP
- Production Part approval process-PPAP preparation
- Small group activities for problem solving – SGA
Value additions, Achievements :
Green Belt member in the following SIX SIGMA Projects :
1. Project title : Rim to Disc weld crack elimination – WELDING SHOP Estimated Cost Savings PA in lakh = 4.35, Project period:Jun’06toNov’06
2. Project title : Shop floor Instrument 100% Calibration – GAUGE MMD
Improvement- Level II, Project period: Jan ‘07 to May ‘07
3. Project title : Disc Inset Variation Elimination – ASSEMBLY SHOP
Estimated Cost Savings PA in lakh = 5.4, Project period: May 07 to Aug’07
4. Project title : Rework Cost Reduction in Components-DRESSING SHOP
Estimated Cost Savings PA in lakh = 21.11, Project period: Mar 05 to Aug’05
5. Project title : Hot form components subcontract machining cost reduction
Estimated Cost Savings PA in lakh = 11.20, Project period:Jun’06toNov’06
6. Project title : SAW Circ.Welding excess reinforcement and quality Improvement.
Improvement Achieved: 3 mm to towards Zero weld projection, Project period:Nov’08to Mar’09
Contributor in the following Six sigma Projects:
1. Project title : Submerged arc welding consumable reduction
2. Indigenous gutter weight reduction thro. process improvement 10.67 Lakh PA
3. Hot Form Component Rework Reduction 20 Lacs PA Aug’07 to Nov’07
4. Reduction of Man-hr per JOB by 25% 19.5Lakh PA Mar’07 to Jun’07
Contributor in Quality Circle, Suggestion and Continual Improvement
- Fire Safety Project: Developed non flammable Dye penetrant testing during 2005
- In Ultrasonic testing, Substituted the imported Probes from Krautkramer (Germany) to indigenous probes, Chennai. Cost saving = 3.6 lakh Annum
- Welding fusion Quality improvement by process improvement [Fit-up].
- Welding UT Rejection reduction from 3% to 0.5%, productivity increase up to10 %
- Welding Burn through Rejection reduction from 5 % to 0.1 %
- Cost saving by introducing AUT Project about 18 lakh per Annum
- Material composition selection in eliminating Welding crack phenomena
- Flash butt welding crack during diametrical expansion in Hot Forming process
- Hot forming process mark Rej Reduced PPM from 15000 to "Zero" PPM
- Serration Rolling In-house Rej, PPM from 5220 to Zero
- Painting Air pocket elimination From 100% to Zero %
- Painting Roller Mark elimination From 100% to Zero%
- Painting process improvement on Manual top coat paint mask
- Painting Dry film optimization during Manual primer coating
- Painting phospating process defect elimination by press filter improvement
- Customer rejection PPM from 325 to "zero" PPM by QCC.
- Cost reduction in gages tool cost about 3.5 lacs one time
- UPH & JPH optimization in manual primer & top coat painting
- Elimination of one machine and combine this activity in first machine
- Trained 50 welder and inspector in welding and inspection in six section
- Conducted NDT Training to 25 technicians in welding UT inspection
- Increased Production rate 30 % in Top coat spray painting through rework reduction by Quality Circle activities during May 2006, Cost saving Rs.2,54,000 PA
- NDT AUT Project execution and integration with Indigenous mechanics.
- Overall Reduction of Scrap and rework from Process by TPM and Initiated Two Quality circle awarded in Q Quest and CII. Contributed to Twenty five Q C. & 100 Small improvement Suggestions.
- Ultrasonic Testing Above 3.6 lakh Meters of Square groove Circumferential weld by angle beam probe - shear wave technique.

-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4445302
Date & Time : 4th Aug 2011 2:47 PM (UTC)
IP Address : 1.39.97.142
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Predicted Country : --

[Guest]

any notifications

[Guest]

Sir I am Sandipan Kundu and I have completed my MBA from George College (Department of Management Studies) affiliated with WBUT (AICTE) Full Time. My specialisation in FINANCE (Major) and MARKETING (Minor) I just want to do work in your reputed organisation please give me a opportunity to my expertise in your organisation.

Thanks
Sandipan Kundun

[Guest]

KASTURI BALRAJ
_____________________________________________________________________
To pursue a challenging career in the field of Human Resource, in an organization, which gives significant exposure and opportunities to learn, grow and prove my abilities, where competence is valued and i will be able to make a meaningful contribution to the growth of the company.
_____________________________________________________________________
Synopsis :
- A budding management professional with an MBA in Human Resource & Finance.
from Institute of Management Studies, Annamalai University. (2009 – 2011).
- Acquired knowledge & understanding of sourcing and screening the right candidates
from a given talent pool.
- Excellent team player with strong analytical, leadership and communication skills.
- Ability in learning new concepts quickly, working well under pressure.
Work Experience :
Working with People Zeal Consultancy & Services Pvt Ltd as a HR Recruiter
since August 2011.
People Zeal is a reputed manpower solutions provider having a large clientele of IT, Manufacturing, Engineering, Financial Services, Automobile Retail, Infrastructure Development companies in Chennai.
Key Deliverables :
- Sourcing candidates for all profiles from job portals and networking for entry, middle and senior level positions.
- Sourcing candidates for confidential and critical senior management positions
through head hunting and other social networking portals such as & Linked In
and other professional forums.
- Preparing candidates for interviews (beginning from preparing CV, tips for attending interviews, technical discussions to salary negotiations)
- Coordinating with multiple clients with a team of two junior consultants in the entry level recruitments for clients.
- Handling business development by posting information about our services in portals such as Justdial.com, Suleka.com, Quickr.com and Yellow pages.
- Supporting Business Development team in preparing presentations and in fixing appointments with clients for executives.
- Handling Accounts Receivables from clients for all verticals as per SLA’s.
- Single point of contact for our IT solutions provider for creating modules for the Database Management ERP tool.
- Training new recruits in sourcing, interviewing and preparing candidates for client discussions.
Academic Projects
Organisation Deepak Instruments, Mumbai
Duration 45 days
Description A Study on Employee Welfare Measures.

Areas of study : Compensation & Benefits:
- Canteen, Upkeep Allowances
- Medical Benefit & Accident Benefit
- Sickness Benefit
- Maternity Benefit
- Disablement Benefit
- Dependant Benefit
- Provident Fund,
- Employee’s State Insurance
- Pension
- Deposit Liked Insurance

Organisation Lakshmi & Co, Chidambaram
Duration 30 days
Description A Study on Accounting practices in a Small & Medium Enterprise.
- Costing, Budgeting & Control
- Accounts Payables & Receivables
- Finalisation of Accounts
Extracurricular Activities
- Was the Secretary of the Cultural Committee of the Management Studies Wing. Organised Cultural Fests, Competitions and Events for all students.
- Was Student Leader for the Students Wing of the Management Studies Ladies Hostel.
- Participated in Intercollegiate Cultural Competitions and Educational Programs & Conferences, and Student Exchange Programs with other Management Studies Institutions.
IT Skills
Software Ms-Office
Tally Version 9.
Declaration :
I hereby declare that the above mentioned details are correct and true to the best of my knowledge.
Yours Sincerely,
Kasturi Balraj

[Guest]

ANJAN GOLUI
EMAIL : anjangolui.2003 AT rediffmail.com
To work with utmost dedication and my full potential so that the organization and myself
both can grow.
EXPERIENCE :- One and half year experienced in a manufacturing company.
M/S CHANDIMATA IRON INDUSTRIES ( An ISO 9001 & 2008 Co. ) From Jun.2010 to Till Date As a Office Assistantant cum Junior Accountant.
Two years experienced in a part time Accounts work.
Key Performance area :-
Day to day Books maintain using Analyst Accounting Software.
E-tendering in various steel plant through enterprise procurement system.
E- Payment of Central Excise, VAT, CST and ESIC.
Accountant :-
- Day to day accounts maintained in various organizations.
- Calculation of VAT & CST

Educational Qualification :-
Name of Exam. Board / Council /
University Year of Passing Marks Obtained Percentage
Madhyamik W.B.B.S.E. 2003 470 58.75
Higher Secondary W.B.C.H.S.E. 2005 554 55.40
Graduation B.Com (H) Calcutta University 2008 378 47.25
CAREER PROFILE
Technical Skills :-
- Operating system-DOS,WINDOWS-98,2000,XP,VISTA
- Packages known-MS-OFFICE 2003/2007
- E-mailing & Internet Working
- Specialist – Tally 9.0, FACT, ANALYST, ACE, EX-NEXT GEN, BUSYWIN,
Taxation etc.

Special Qualification :-
- Advanced Diploma in Financial Accounting (2008 - 2009 ) FROM HOWRAH YOUTH COMPUTER TRANING CENTRE
-Engineering & Technology from W.B.S.C.V.E.T. IN 2009- 2010
Declaration
The above information are true to the best of my knowledge
Signature
ANJAN GOLUI

[Guest]

1- It has been mentioned that there would a One year training. Could you please advise, will we be paid during Trainee period as well.

2- On the application form, it was mentioned - To be submitted neatly typed in brackets. I have submitted my form in typed and not hand written. Will my application be selected?

`E-0: 12,600-3%-32,500 (Min. gross pay `24,000/- per month). In addition, benefits like Medical reimbursement, PF, gratuity, leave encashment, etc are also payable.

You have submitted form typed. They have asked for to submit neatly typed form. SO what is the question here???

[Guest]

Soumendas600 AT gmail.com
SOUMEN DAS

Career Objectives :
To work and deliver the best of my knowledge and talents in an environment where I can contribute to the organizational profit as well as where I can grow.
Academic Qualification :
Examination Board /University Passing Year
Bachelor Of Arts (B.A) (10+2+3) University Of Calcutta 2002
Higher Secondary (10+2) W.B.C.H.S.E 1999
Madhyamik (10) W.B.B.S.E 1997
Work Experience Summary :
Ø 1. Presently employed with J.R LADDHA FINANCIAL SERVICE PVT LTD- Mutual fund service division as Business Co-Ordinator-(Back Office) Daily basis contact with various mutual fund for different issues & Process the total commercial transaction through FIN-NET. Banking related issues. Preparing MIS for important transactions & others. since- 11 02 2011.Handelling the all type of query which was daily basis receiv from RM.
2. Employed with KARVY COMPUTER SHARE PVT. LTD. - Mutual Fund Service division as Investor Relationship Officer since March- 2007
Job Profile : -
· Receiving the applications of various funds from Retail investors, Corporates, HNIs and IFA s.
· Investor relationship.
· AMC co-ordination.
· Maintenance of MIS on daily basis.
· Recovery of excess payments of brokerage, dividend and redemption.
· Auditing of PURCHSE, SIP, SWICH, REDEMPTION, STP, SWP
· Complete execution of UTI & RMF (Reliance) Mutual Fund, CAN BANK Mutual Fund, DWS Mutual Fund Tata Mutual Fund, PRINCIPAL Mutual Fund & Mirae Mutual Fund activities, which include data entry, banking, dispatch, maintaining all the records of the investors.
· Processing the liquid, equity transaction & cheque Banking.
· AMC visit and relationship maintenance.
· KYC generation in accordance with SEBI guidelines.
· Attending regular queries received from the Investor, AMC
· Solving critical problems in co-ordination with Head Office located at Hyderabad
· Co-ordination with 22 Branches in the Eastern Region
3. 2yrs six months experience as a computer operator and back office job data entry operator in MAHASWARI DATAMATICS (P) LTD. This company’s work is related to demat, remat registrar, and also works as share transfer agent. I was associated with this company from 2004 to 2006 June.
4. Having 1yr experience as Sales Executive in ABIS SOFTWARE PVT. LTD. Yr (2003-2004)
But mostly my profile is associated with Mutual Fund R &T industry and Stock broking.
Computer Proficiency :
Office Tools : Ms Word, Excel- 2000,2003 & 2007 Have a good knowledge in excel , PowerPoint, Access, Hardware.
Worked on Operating Systems : Windows 98, XP, internet, TALLY
Programming Languages Known : Fox Pro.
Typing Skills :
Manual Speed : 35 words/minute
Computer Speed : 45 words/minute
Communication Skills : Proficient in Bengali, Hindi & English
Hobbies : Social Works & gardening.
I hereby declare that the above-mentioned information provided by me is true to the best my knowledge & belief.
Dated :
Place : Kolkata (Haridevpur) ----------------------------
Soumen Das

[Guest]

CURRICULUM VITAE

BUBAI BISWAS
bubai111biswas AT gmail.com
JOB OBJECTIVE :
To work in an organization in a high growth industry that provides opportunities to learn and grow where I can contribute to the growth of the organization.
WORK EXPERIENCE :
January, 2011 to till Date
Company Name : ABC India Limited
Company's address : www.abcindia.com
Designation : Sr. Supervisor – Accounts Department
Industry : Logistics Company
Work Description : CCEM Division -
* Linked with our allBranch office in Eastern Region & and linked with Calcom Cement India Limited for six months.
* Preparation of Cash Statement including petty cash or maintaining Bank transaction regular basis.
VRMD Division -

Primary Job Responsibilities :
* Maintain all Billing matter in Fast Track Software (ERP Version) & others matter in Tally [VRMD&NALL both] since July, 2011.
* All Branches TDS & Service Tax Checking through System.
* Handling 12 banks of the company and prepare Bank Reconciliation Statement for the same. Maintaining the balances of these banks on regular basis.
Corporate Job Responsibilities :
* Handling all Treasury related functions on centralized basis.
* Preparation, Accounting and transferring of salary cheques of all employees all over India directly into their respective bank.
* CMS Fund collection and utilization.
Major Achievements : Team member of Centralized Salary cheque payment Policy for the Entire Organization – all Employee (410) to be implemented at all ABC offices throughout the country.
Key Skills :
Treasury Functions
Accounting Entries through Hard Work with Positive attitude.


February, 2006 to December, 2010
Company Name : Handloom Cottage (P) Ltd.
Designation : Accountant
Industry : Garments
Work Description : Accounting & Operation Department-
* Preparation of Cash Statement including petty cash or maintaining Bank transaction regular basis.
* Maintain all Purchase, Sale, PRM, SRM, challan and bill,others
departmental matters, in manually & also record in Tally 7.2 & 9.
* Preparation of the monthly Bank Reconciliation Statement.
* Maintain Production Unit & issue all Pay-slip in HR Dept.
Taxation –
* Preparation of statement showing Advance Tax payable on
respective due dates, Completing advance tax challans.
February, 2004 to January, 2006
Company Name : ALBELI FASHION PVT. LTD.
Designation : Accountant
Industry : Fabric (Textile & Fashion World)
Work Description : Accounting -
* Preparation of daily Cash Book/Statement.
* Maintain all Purchase, Sale, PRM, SRM, challan and bill, others
departmental matters manually & also computerized in Tally 7.2
* Linked with others Branch Office all over in the country.
Taxation –
* Preparation of statement showing Advance Tax payable on
respective due dates, Completing advance tax challans for
May, 2002 to January, 2004
Company Name : J. D. PHARMACEUTICAL (P) LTD.
Designation : Assistant Accountant
Industry : Manufacture Co.
Work Exposure : Preparing of all of accounting related document and Others
official matters connected with Formation of Companies, Preparation of a Single Minutes Books

ACADEMIC QUALIFICATION :
EXAMINATION YEAR OF PASSING DIVISION / CLASS BOARD/UNIVERSITY
B.COM (HONS.) 2002 2nd Class Calcutta University
HIGHER SECONDARY 1999 2nd W.B.C.H.S.E.
SECONDARY 1997 1st W.B.B.S.E.

COMPUTER PROFICIENCY :
Proficient with M/s Dos, Windows, Power Point, Excel, Word, HTML, DHTML etc.
Accounting Package - ACCORD (5.1 Version), Fast Track (ERP Version)
FINANCIAL ACCOUNTS – TALLY (7.2 & 9), FACT, EX-NEXT GENERATION, ACE
DECLARATION :- I vouch for the accuracy of the above all particulars.
Date: - ------------------------------------
Place: - (Signature)

[Guest]

I AM IT 81% PASS FROM MITI BHOPAL AND FITTER LEARNING FROM MITI 2ND YEAR. PLEASE GIVE ME JOB.