www.nehu.ac.in Recruitment 2012 North Eastern Hill University Shillong : Registrar, Executive Engineer

Closed Thread
Results 1 to 2 of 2
  1. Post Count Number #1
    Freelancer
    Join Date
    August 18th, 2010
    Location
    India
    Posts
    16,237

    www.nehu.ac.in Recruitment 2012 North Eastern Hill University Shillong : Registrar, Executive Engineer

    Name of the organisation : North Eastern Hill University, Shillong ( nehu.ac.in )
    Name of the post : Recruitment for Registrar, Executive Engineer in 2012

    Regular Post Vacancies

    North Eastern Hill University

    Details of essential qualifications, experience etc. in respect of Non Teaching Group-‘A’ /Other Academic posts may be seen as under.

    Name of the Post : Registrar
    Pay Band : Rs. 37400-67000/-
    Grade Pay/Academic Grade Pay : Rs.10000/-
    Number of vacancies : 1

    http://www.nehu.ac.in/Advertisements/recruitment.php
    http://www.nehu.ac.in/Advertisements/ESTTIIB_244.php

    Name of the Post : Controller of Examinations
    Pay Band : Rs. 37400-67000/-
    Grade Pay/Academic Grade Pay : Rs.10000/-
    Number of vacancies : 1

    Name of the Post : Deputy Registrar
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.7600/-
    Number of vacancies : 1

    Name of the Post : Executive Engineer
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.6600/-
    Number of vacancies : 1

    Name of the Post : Assistant Librarian
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.6000/-
    Number of vacancies : 1

    Name of the Post : Assistant Director of Sports
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.5400/-
    Number of vacancies : 1

    Name of the Post : System Analyst
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.5400/-
    Number of vacancies : 1

    Name of the Post : Information Scientist
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.5400/-
    Number of vacancies : 1

    Name of the Post : Hindi Officer
    Pay Band : Rs. 15600-39100/-
    Grade Pay/Academic Grade Pay : Rs.5400/-
    Number of vacancies : 1

    HOW TO APPLY
    The prescribed application form along with other details may be downloaded from the University website nehu.ac.in . Filled in downloaded application must be accompanied by an application fee of Rs. 500/- (Five hundred)for General/OBC candidates and Rs. 250/-(Two hundred & fifty) for SC/ST candidates. Person With Disabilities are exempted from payment of application fee. The fee may be paid through Demand Draft/ Banker Cheque drawn in favour of Finance Officer, NEHU payable at Shillong or the fee can also be paid through University Challan. Application in complete form be sent to the
    Assistant Registrar(Estt.II),
    NEHU, Mawkynroh, Umshing,
    Shillong-793022.


    Last date for submission of filled in application form is 31.1.2012.
    Attached Images Attached Images
    Last edited by mariammal; January 6th, 2012 at 05:32 PM.

  2. Post Count Number #2
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    Name : nsivakumar
    Email : siva54kumar AT gmail.com
    Designation / Skillset : |Senior Engineer Production and maintenance
    n.sivakumar

    Resume :
    Summary of Skills & Experience
    A DEEE Graduate with more than 7 years’ of experience in maintenance department at automobile part manufacturing sector.
    Thoroughly experienced in all aspects of ELECTRICAL & MECHANICAL MAINTENANCE
    1. Experience in Electrical Maintenance from large scale Mechanical / Process industries,
    2. Very Good Knowledge of Control System, safeties,
    3. Sound technical knowledge of the electrical and electronic components, switchgears, cables and sensors,
    4. Having experience in panel wiring and new machine eraction & commessing works,
    5. Having experience in CNC controlled Machines Alfa series,
    6. Having experience in gear cutting and hobbing, grinding machine’s,
    7. Having experience in Trouble shooting for CNC machine’s for VMC ,HMC, LATH, for FANUC & SIEMENS control,
    8. Having experience in Ador welding machine & Panasonic welding machine and hand grinding machines.
    9. Having experience in Trumpf laser machine and bending machines
    10. Having experience in paint shop maintenance Electrical & mechanical maintenance. (Preventive, Breakdown maintenance) and shutdown maintenance.
    11. Having experience in Trouble shooting in ECOFLAM burner.
    12. Having experience in conveyors & oven and AHU (Air handling unit) units..
    13. Having experience in Trouble shooting for transporter & CED control (cathode electro deposit) panels.
    14. Having experience in membrane system and UF system.
    15. Trouble shooting in paint shop Chiller Units.
    16. Having experience in Spray booth and paint mixing equipments.
    17. Having experience in zip crane and EOT cranes.
    18. Trouble shooting in PLC control machine, and relay logic control machine.
    19. Having experience in off High way vehicles cabin assembly works.
    20. Having experience in Compressor, Generator, Cooling tower.
    21. Having experience in CIEG norms getting from TNEB approval.
    22. Handling with (CGCF) continuous gas carburizing furnace Electrical & mechanical maintenance. (Preventive, Breakdown maintenance and shutdown maintenance.
    23. Handling with (SQF) Sealed Quench furnace Electrical & mechanical maintenance. (Preventive, Breakdown maintenance) and shutdown maintenance.
    24. Handling with ENDO GAS GENERATOR Electrical & mechanical maintenance. (Preventive, Breakdown maintenance) and shutdown maintenance.
    25. Having experience in proximity, photo sensor and all type of limit switch ,
    26. Having experience in power station maintenance, installation,
    27. Trouble shooting in all types of motor starters, panel board wiring,
    28. Trouble shooting in heating furnace for SCR control unit
    29. Trouble shooting in modulating motor & oxy prop and cp controllers,
    30. Working exp in rectifiers, some pneumatic valves, and, controlling system installation,
    31. Having experience in TAKYO project.(new project development works
    32. Having experience in trouble shooting in soft blasting machine’s
    33. Having experience in Battery & Diesel Fork lift maintenance works.
    34. Carrying out Effective Spares parts Management for TPM activities.
    35. Hydraulics & Pneumatics.
    36. Having experience in ETP&STP and RO plants.
    37. Doing WHY-WHY Analysis for all Breakdowns to avoid Re-Occurrence.
    38. Good working knowledge of electrical safety systems and procedures for the safe operation of complex high voltage distribution systems
    39. Well versed to work in the computer especially in ORACLE system. Acquired to proper work orders, purchase Requisitions - Inventory module, move orders, Material procurement knowledge etc.
    Organisational Experience
    Organization : FRITZMEIER MOTHERSON CABIN ENGINEERING LTD
    Chinnayanchatram, near Kanchipuram, Chennai
    Period : 07.01.2011 to till date.
    Destination : Sr.Engineer
    Organization : Tractors And Farm Equipment Ltd, (TAFE) Gear Division
    (A member of Amalgamations Groups) Kelambakkam chennai
    Period : 11-09-2005 to 03.01.2011
    Destination : Engineer
    Organization : Lakshmi Machine Works unit -1
    Periyanaicknpalayam, Coimbatore.
    Period : 23-08-2004 to 22-08-2005
    Destination : Diploma Training

    Education
    Diploma in ELECTRICAL& ELECTRONICS Engineering from sri Krishna polytechnic, Battalagundu in 2004. (Secured of 86%)
    ‘C’ LICESENSE HOLER FOR TAMIL NADU ELECTRICAL LIDENSING BOARD
    NO : C38446
    Thiru vi.ka. indl. Eastate , guindy, chennai- 600 032.
    Key Responsibilities
    - Preventive and Breakdown maintenance of Plant Machineries and Utilities.
    - Spares Management
    - KAIZEN active’s
    - Poke yoke active’s
    - Energy Savings and Optimization & Plant Electrical
    - Excellent organizing capability to meet the daily requirements of TPM activities.
    - Safety first.
    - 5’s activity

    Strength
    - Willing to accept challenges in the field of Automotives so as to perform successfully.
    - Adapt easily to new environment and responsibilities.
    - Result Oriented and Hard working
    - Ready to work both independently as well as versatile team member..
    - Adaptable and Quick Grasp for learning in the field of Automotives.
    - Professionally, I can also give my work in time bound deliverables.
    - Have proactive goal to render required service with perfect quality and quantity with accuracy.
    PERSONAL DETAILS

    DECLARATION
    I hereby declare that all the above information’s are true to the best of my knowledge.
    Thanking you
    Place : chennai your s truly
    Date : N.SIVAKUMAR
    -------------------------------------------------------
    More Information about this submission and submitter :-
    ___________________________________________________
    Submission ID : 4454068
    Date & Time : 7th Aug 2011 6:36 AM (UTC)
    IP Address : 27.251.118.205
    Browser Info : Opera/9.80 (Windows NT 5.1; U; Edition Campaign 04; en) Presto/2.9.168 Version/11.50
    Predicted Country : --