www.flsmidth.com FL Smidth Pvt Ltd Chennai : Design Engineer Autocad, Solidworks

[Admin]

FL Smidth Private Limited

Company Profile
FLSmidth is an international engineering company with an annual turnover of EUR 2.6bn. We are the worldâs leading supplier of plants, machinery, services and spare parts to the cement and minerals industry. To maintain our market leading position, we invest massively in technological innovation, R & D and training of our 10,800 employees worldwide. Visit www.flsmidth.com for further information on our business and services.

Design Engineer - Plant Utilities
Experience: 3 - 7 Years
Location: Chennai

Job Description
- Load calculations for process ducts, size chutes and secondary de-dusting systems and to use necessary tools to size auxiliary vendor equipments.
- Various lists Foundation Bolts, Lubrication, Plant air and water, Expansion Joint and Plant Safety Signs
- GA Revision tracking forms, GA Review reports and Project Status reports

Desired Candidate Profile
1) Minimum of 2 yrs experience in Cement Plant
2) Expertise in Autocad & Solidworks
3) Candidates who have applied recently in the last six months to FL Smidth Private Limited should not apply again.

Address:
FLSmidth Limited
FLSmidth House,34,Egatoor
Kelambakkam
(Old Mahabalipuram Road)
Chennai,Tamil Nadu,INDIA 603103

Email Address: jnj-in@flsmidth.com
http://www.flsmidth.com

Keywords: AutoCad , Solidworks


More Autocad Solidworks Jobs in India
More Autocad Solidworks Jobs in Chennai

[Guest]

Sir,

Please inform your job offer

Regards
R.Ilavarasan

[Guest]

Dear sir, I have seen the add for openings in your company from that i have applied for job to your company. Thanks & Regards, Sathishkumar.A

[Guest]

hi, sir............. if now there is a vacancy for auto cad and pro-e for diploma in mechanical engineering......

[Guest]

GUNASEELAN. M
guna.mechengg AT gmail.com
VISION :
To settle myself in a challenging career wherein I can improve my knowledge and skills and strive towards the growth of the organization and value to my career through hard work and innovation
ACADEMIC PROFILE :
Course Institution Board Year of completion Marks %
B.E. Mechanical Engineering Oxford Engineering College, Trichy Anna University, Chennai, Tamilnadu, India. May 2010 73%
H. S. C. Bishop Heber Higher Sec. school, Trichy Tamilnadu State Board, India May 2006 64%
S. S. L. C. Bishop Heber Higher Sec. School, Trichy Tamilnadu State Board, India. May 2004 82%
PROFESSIONAL SKILLS :
- Drafting Software : AutoCAD
- Modeling Software : Pro-E,CATIA.
FIELDS OF INTEREST :
- PRODUCTION ENGINEERING
- AUTOMOBILE ENGINEERING
- MANUFACTURING ENGINEERING
PROFESSIONAL EXPERIENCE :
Two Stroke Petrol Engine with Fuel Injector :
- Normally two stroke engines are run with carburetor. Due to carburetor, the consumption of fuel increases and fossil fuel burning occur compare to fuel injector. To avoid it we are replacing carburetor by fuel injector in our project.
TRAININGS ATTENDED :
- Oct.2009 – Attended a one day Industrial visits at “VEESONS” (Boiler accessories production plant) Industrial Estate, Thuvakudi, Trichy.
- Attended one day industrial visit at “THE GOLDEN ROCK RAILWAY WORKSHOP”, Ponmalai, Trichy
ORGANISATIONAL SKILLS :
- I was the student coordinator of NSS camp at Mattaiparaipatti.
- Secretary of mechanical engineering department.
- Organizer at symposium sessions
EXTRA CURRICULAR ACTIVITIES :
- Won silver medal in JUDO conducted by Anna university.
- Participated in ALL INDIA JUDO competition at Punjab.
- Won prizes in various dance contests at college levels.
- Participated & won prize in many body building competitions.
PROFESSIONAL PROFILE :
- Working as a DESIGN ENGG at M/s. TECH-UP ENGINEERING PVT LIMITED, No.56,North Kattur,Trichy-620019. From June 2010 to till date.

[cgdinesh89]

C G DINESH KUMAAR
________________________________________
Email –ID : cgdinesh89 AT gmail.com / cgdineshkumaar AT gmail.com
Objective
To obtain a position that sets me a career and growth and to exhibit my skills in that field.
Educational Qualification
Qualification Institution Board Year of Passing Percentage
Bachelor of Engineering (Mechanical)
Veltech Multitech Dr.Rangarajan Dr.Sakunthala Engg. College Anna University May 2010
65.00%
(1st class)

Higher Secondary Velammal Mat.Hr.Sec School State Board March 2006 71.41%
(1st class)

S.S.L.C Velammal Mat.Hr.Sec School Matriculation Board April 2004 71.09%
(1st class)
Professional Skills
Professional in Mechanical CADD (PRO-E, CATIA, ANSYS), CADD Centre Training Services, Padi, Chennai.
Work Experience and Responsibility
2) Company Name : Working in MTAB Engineers Private Limited, Chennai from January 10, 2011 to till date (Leading Manufacturer of CNC Equipments, Robotic Equipments, Manufacturing Automation Equipments & Mechatronic Equipments)
Position Title : Graduate Engineer Trainee, Design Engineer
Software’s used : Pro-E Wild Fire 5, Autodesk Inventor 2011, Autodesk AutoCAD 2011 & Autodesk Algor.
Software Skills :
Auto-desk Inventor 2011 - Experience in Solid modeling, Surface modeling,
Assembly, Detailing, Animating the Assembly constraint, Analysis using inventor
Pro-E Wild Fire 5 - Experience in solid modeling, Surface modeling, Assembly &
Detailing
Solid works – Experience in Experience in Solid modeling, Surface modeling,
Assembly & Detailing
Autodesk AutoCAD 2011 – Experience in drawing 2D diagrams, detailing it &
Taking print-out
Job Description :
1) Designing and Drawing of various machine tool components.
2) Designing of Sheet-Metal products like ducts, brackets, motor holding plate and color matching plates.
3) Implementing Geometric Dimensioning & Tolerance (GD&T) in diagrams.
4) Applying limit & fitting tolerance for shaft and holes.
5) Conducting static analysis on machine’s base using Autodesk Algor, to ensure design is safe.
6) Designing of jig plates.
7) Giving Part code number as per ISO for manufacturing items, purchase items, fasteners and for standard components.
8) Uploading all the manufacturing items, purchase items, fasteners and standard components of the machine in the ERP.
9) Conversion of 2d diagrams to 3d diagrams for older projects which are designed in Auto-Cad.
10) Taking the layout of drawing as per ISO, adding revision and issue no and giving it to shop floor workers for production
11) Updating the B.O.M of all the projects once in 10 days.
12) Interacting with shop floor workers and clearly understand the operation and make slight modifications in design if needed to reduce the assembly time.
13) Submitting the present day’s report to DGM.
2) Company Name : Shine Plasto Products (Manufacturer of all kinds of Plastic mould Injection & Blow transparent bottles), Chennai from May 2010 to Dec 2010 (7 months)
Position Title : Graduate Engineer Trainee, Design Engineer
Software’s used : Pro-E Wild Fire 5 & Autodesk AutoCAD
Job Description :
1) Check the job as per drawing.
2) Enter the production per hour.
3) Doing the Final Inspection and labeling for dispatch.
4) Checking the incoming raw material.
5) Getting the master piece from the customer, designing the die for the master piece.
6) Creating the assembly model for die and ensuring it is free from interference.
7) Dimensioning the finished part model and releasing the drawing for manufacturing.
8) Ensuring the die is designed on the correct time and customer’s demand is met.
General Skills
Ability to learn, understand quickly.
Ready to take up pressures with set deadlines.
Good in problem solving attitude
Good communication and computer skills.
Ability to work with minimal supervision.
Time Conscious & Self Motivated.

[Guest]

Resume

K.VENKATESAN.
Email-ID : venkatesh0016 AT gmail.com


CAREER OBJECTIVE :
Seeking a position to utilize my wisdom, innovative skills and abilities in the organization that offers professional growth while being resourceful, innovative and flexible.

EDUCATIONAL QUALIFICATION :

Qualification
Subject
Institution Board/
University Year of Passing
%Mark
__
BE

Mechanical
Sathayabama
University
Jeppiaar Nagar
Chennai- 600 119

University
__
__

DME
Mechanical Meenakshi
Krishnan
Polytechnic
Chennai- 600 075

Dote
2008
70.2%
12th -std
GM Government.
boys
hr.sec.school
Vandavasi

State board

2006
65%
10th -std
__ Government
sec.school
Melpathi
-604 505

State board
2004
58%
SOFTWARE SKILLS :
- M. S. Office
- Auto cad 2010
- Pro-E wildfire 4.0
- Catia V5 R18
EXPERIENCE DETAIL :
Profile 1st : Pon Engineers Pvt Ltd, Chennai- 600 058,
Design Engineer in Projects
Powder Coating Equipments manufacturing
(Hot air Ovens, Aluminium aging Ovens, Powder coating
Booths, Recovery’s, Powder Coating m/c with Guns, Dust
collectors, Automatic Transporters,Pre Treatment plants, Oil
purifier, Burners, I.D. fans, Powder feed units,
December 2009 to till date.
Profile 2nd : Asian Peroxide Limited (APL), Chennai – 600 001
CAD Engineer
Design & drafting to the Chemical
Industries Plant layout drawing &
Tank drawings drafting
May 2008 to November 2009.
PERSONAL SKILLS :

Special attention in showing innovative skill in all activities. Well organized and
Easily meets deadlines. High self-confidence and positive thinker.

[Guest]

P.ALVIN JONCE
E-mail : aalvinjonce AT yahoo.in

Objective
Seeking assignment in Electrical field particularly in Design/Drafting, this will utilize my education and professional skills and offer me an advancement opportunity.
Professional Snapshot
- A dynamic professional with around 3 years of experience in Electrical Drafting for various Industries like Paper & Pulp and Power Plants etc.
- An out-of-the-box thinker with excellent leadership skills and demonstrated abilities to meet deadlines & work under pressures.
Organizational Experience
- Excel Consulting Engineers Pvt. Ltd, Chennai

Since July’2009 to Till Date as Electrical Draftsman. The Company is doing Electrical Consulting jobs for industries like Paper & Pulp, iron & steel, etc.
Projects
- MCL, Salem Project-110kV New Switchyard, Power House Project & Plant.

Preparation of HT & LT Single Line Diagram, Equipment Layouts, Civil Detailing Layouts( foolr opening, insert plate, wall opening & joinery details) Earthing Layouts, Lighting Layouts, Lightning Protection Layout, Cable Tray Layouts, Busduct Layouts, Transformer Foundation Layouts & Site coordination erection & commissioning
- VESTAS Australian Wind Mill Project- 33kV Unit Substation.

Preparation of Equipment Layouts & Earthing Layouts.
- MCL, RR Nagar Project-110kV New Switchyard & Power House Project.
NEW 11kV Coal Handling Substation (CHSS)

Preparation of HT & LT Single Line Diagram, Equipment Layouts, Civil Detailing Layouts( foolr opening, insert plate, wall opening & joinery details) Earthing Layouts, Lighting Layouts, Lightning Protection Layout, Cable Tray Layouts, Busduct Layouts, Transformer Foundation Layouts & Site coordination erection & commissioning
- MCL Alathiyur_110kV New Switchyard & Fault Level Study.

Preparation of HT Single Line Diagram & Equipment Layout.
Prepared Key SLD, Breaker Status & Impidence Network Drawing.
- MCFL Fault Level Study. (Done through WARTSILA, Chennai).

Prepared Key SLD, Breaker Status & Impidence Network Drawing.
- MCL RR Nagar_ Fault Level Study.

Prepared Key SLD, Breaker Status & Impidence Network Drawing.
- TRISHE KAYATHARE 230kV Switchyard Project. (Done through SIEMENS, Chennai).
Preparation of HT Single Line Diagram & Equipment Layout.
- ASTHA A.P TRANSCO 132kV Switchyard (GIS HYPACT). 35MW IPP Project & Power House Project.
Preparation of HT & LT Single Line Diagram, Equipment Layouts, Civil Detailing Layouts( foolr opening, insert plate, wall opening & joinery details) Earthing Layouts, Lighting Layouts, Lightning Protection Layout, Cable Tray Layouts, Transformer Foundation Layouts & Site coordination erection & commissioning
Areas of Exposure/Expertise
- Preparation of Single Line Diagram.
- Preparation of Electrical Equipment Layout, Transformer Foundation Drawing.
- Preparation of Earthing, Lighting, Lightning Protection, Busduct, Cable Tray, Cable Trench Layouts & their detail drawings.
- Preparation of Erection Key Layout.
- Preparation of engineering BOQ
- Civil Detailing Layouts (Floor Opening, Wall Opening & Joinery Details).
- Adarsh Line Accessories India Pvt Ltd, Chennai

Since June’2008 to May’2009 as Junior Design Engineer. The Company is Design & Manufacturing.
Responsibilities
- Preparing of manufacture pattern drawing for line conductors.
- Preparing of tender drawing for line connectors for high voltage and high current according to consumers commands.
Academic Credentials
- Secured 73% in DEEE, Apr’2008 from Maderator Ganadhason Polytechnic College, Nagercoil
Software Knowledge
- Conversant with AutoCAD 2011, 2009, 2007, 2004, Bricscad, MS offices.

[Guest]

TAMILSELVI SHANMUGAM
- E-mail : pstamilselvieie AT gmail.com

Objective :
To obtain a position as an Instrumentation Engineer where my skills and abilities will be fully utilized for the productivity of the organization with a platform to refine and enhance my skills.

Experience Summary :
- Hands-on experience in the conceptual and basic design of graphics and logics.
- Involved in the preparation of I/O list and logics development based on the control philosophy.
- Significant exposure in the SCADA implementation and Design integration.
- Well versed in the preparation of Functional design specification, Software design specification and Bill of material for DCS.
- Skilled in generating typical graphic elements, analyzing P&ID, assigning animation to required components on the mimics, generation and testing of displays, trends and history using DeltaV alarm configuration DCS.
- Having prior working knowledge in generating DeltaV codes (FBD, SFC & PFC) and commissioning of DeltaV DCS
- Basic knowledge in foundation field buses, Modbus, and OPC communications.
- Configuring DeltaV Network, System Server, Historian, DeltaV reporter, Application, Operator Station and Developing Web Server Graphics.

Key Accomplishments :
- Owing to the best performance, in short time became part of the “Onsite projects delivery team” which handled assignments from Kuwait, Germany etc.,
- Acknowledged by client for the timely quality delivery by granting new assignments to the company.

Educational Qualifications :
- B. E (Electronics & Instrumentation Engineering), Vel Tech, Anna University, Chennai, 2010 – 81%
- Higher secondary School, St.Joseph’s Girls Hr. Sec School, Chennai, 2006 – 81%
- High School, Gnanodhaya Girls’ High school, Chennai, 2004 – 92%

Technical Skills :
- DCS : DeltaV Continuous Process, Batch process and Safety Instrumented Systems
- Operating System : Windows 98, 2000, Server 2003, , Server 2008, XP & 7
- Languages : Basics in C, C++, Visual Basics in Deltav
- Embedded Coding : Basic Programming knowledge in 8085, 8259, 8251, 8279, 8255 Microprocessor and 8051 Microcontroller

Certifications :
- PLC and SCADA : Undergone training in Advanced Training Institute, Chennai.
- Industrial Instruments : Undergone training in Testing and Calibration of Pressure and Temperature Sensor in Advanced Training Institute, Chennai.

Career Profile :
Almeer Technical Services Co.W.L.L, Chennai
Control Systems Engineer, Nov 2010 - Till date

Projects :
- Client : Zentek Export Engineering Pvt. Ltd, Pune.
Location : Pune
Project : AMGEN HTST
System : DeltaV DCS Batch Process
Role : Automation Engineer
Primary Responsibilities :
- Configuration and Testing of equipment module, phases and recipes based on approved FDS.

- Client : Emerson Process management, Mumbai.
Location : Chennai
Project : Gulf Farabic Petrochemical Corporation (GFPC)
System : DeltaV Web Server Graphics.
Role : Automation Engineer
Primary Responsibilities :
- Converting the DeltaV graphics to DeltaV– Web Server Graphics based on customer requirement.

- Client : Zentek Export Engineering Pvt. Ltd, Pune.
Location : Pune
Project : Genzyme Stella
System : DeltaV DCS Batch Process
Role : Automation Engineer
Primary Responsibilities :
- Coding of complex phase modules and recipes based on approved FDS.

- Client : Zentek Export Engineering Pvt. Ltd, Pune.
Location : Pune
Project : PGC NSI MCS
System : DeltaV DCS Batch Process
Role : Automation Engineer
Primary Responsibilities :
- Coding of complex equipment modules based on approved FDS.

- Client : Emerson Process management, Mumbai.
Location : Chennai
Project : Orchid chemicals.
System : DeltaV DCS
Role : System Commissioning Engineer
Primary Responsibilities :
- Graphics and Control Modules creation as per Documents and P&IDs.
- Establishing communication with serial device (Gram compressor).

- Client : Kuwait Oil Corporation (Motorala PLC), Kuwait.
Location : Chennai
Project : DeltaV migration to DeltaV latest hardware including Charms (LGMS)
System : DeltaV SIS and S series controller at Kuwait
Role : Control System Engineer
Primary Responsibilities :
- Detailed study on ESD logic requirement.
- Generation of Boolean logic diagram based on the Cause & Effect diagram.
- Generation of DeltaV format specification file for bulk modules generation.
- Updating DCS I/O assignment into the DeltaV format specification file.
- Bulk import of channel configuration.
- Library Class module generation based on the grouping of Logic requirement.
- DeltaV SIS logic development.
- Testing of logic developed to meet the customer requirement
- Excel based report generation.
- Graphics development.
- Dynamos and faceplate generation as per the site requirement.
- Serial Communication configuration and module generation.

- Client : Emerson Process management, Mumbai.
Location : Chennai
Project : Coromandel International Ltd
System : DeltaV DCS
Role : Systems Engineer
Primary Responsibilities :
- Generation of DeltaV format specification file for bulk modules generation.
- Updating DCS I/O assignment into the DeltaV format specification file.
- Bulk import of channel configuration.
- Selection of PCSD library module template as per the site requirement.
- Testing of logic developed to meet the customer requirement.
- Excel based report generation & graphics development.
- Dynamos and faceplate generation as per the site requirement.

- Client : Emerson Process management, Mumbai.
Location : Chennai
Project : Continental Carbon India Ltd
System : DeltaV DCS
Role : Team Member
Primary Responsibilities :
- Generation of DeltaV format specification file for bulk modules generation.
- Updating DCS I/O assignment into the DeltaV format specification file.
- Bulk import of channel configuration.
- Library class module generation based on the grouping of logic requirement.
- Testing of logic developed to meet the customer requirement.

- Client : Kuwait Oil Corporation, Kuwait.
Location : Chennai
Project : Saipem
System : DeltaV DCS
Role : Team Member
Primary Responsibilities :
- Deltav Graphics Development.
- Generation of DeltaV format specification file for bulk modules generation.
- Updating DCS I/O assignment into the DeltaV format specification file.
- Bulk import of channel configuration.
- Library class module generation based on the grouping of logic requirement.
- Testing of logic developed to meet the customer requirement.

- Client : Emerson Process management, Mumbai.
Location : Chennai
Project : Dr. Reddy Pharmaceuticals Ltd, Gulf Farabic Petrochemical corporation, Atul Bio-science, Galaxy, Macred India Ltd, Asian Paints
System : DeltaV DCS
Role : Team Member
Primary Responsibilities :
- DeltaV Graphics Migration from the older version to the newer version like 9.3, 10.3 & 11.3
- Updating DCS I/O list and assignment
- DeltaV graphics development in various versions.
- Dynamos creation in graphics.

Personal Particulars :
- Date of birth : 21st March 1989
- Nationality : Indian
- Passport Number : H4264482
- Languages Known : Tamil, English
- Address : Chennai
- Marital Status : Single

[Guest]

I am kulkarni. Please Tell me how and where can i apply for autocad mechanical draughtsman job?

[Unregistered]

Dear Sir,

I am basically Mech Engg. Gradute of more thatn 25 years of experience in Proj. Mgmt & Site MGMT. I am looking out for site management job. Currently I am in Pune & willing to relocate with in short span of time

Regards,

ANAND SHELLIKERI