PPMS International Angola : Piping Works Preparation Engineer

[Admin]

PPMS International
http://www.ppms-paris.com

PPMS International : Angola : Piping Works Preparation Enginee

Keywords: Piping Engineer, Piping Designer, Works Preperation, Auto CAD

Company Profile
PPMS is specialized in the technical assistance of the offshore, petrochemical and chemistry industries, is recruiting Instrument Supervisors for different LNG project located in Middle East and Africa.

Piping Works Preparation Enginee
Experience:
5 - 10 Years
Location:
Angola
Compensation:
Food, Accommodation, Insurance, Laundry, Air ticket, Transportation etc. provided
Education:
UG - Any Graduate - Any Specialization

PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Other
Posted Date:
04 Sep


Job Description
Reporting to the Area Supervisor you will be required to establish piping and steel structure general plan, ISO plan. Plan required work activities to ensure that design drawings, tools, equipment &materials are available. Maintain effective schedule

Desired Candidate Profile
Good experience in piping design, equipmt., sizing &specifications. Highly proficient in use of Microsoft Office Suite + Autocad, Microstation. 5 yrs exp. in Piping Engineering in Oil & Gas industries and a good level in English. Rotation 9/3 Onshore

Executive Name:
Mr Navas Koya

Address:
Not Mentioned

Email Address:
cv505@ppms-paris.com

Telephone:
0033156591657

Reference ID:
CV115

[Guest]

I am Bachelor in Chemistry and 34 years exp in operation in Oil/Gas/Fertilizer/Refinery/Terminal as Field Operator DCs Operator,Supervisor
I am looking for any suitable position like Operator/Panel/DCs Operator/Trainer/Terminal supervisor in onshore/offshore in any country.I am available to join within a week time.I have 34 years exp with Qatar gas/GSFC,PDO Oman,hell Nigeria
Pl do needful for the same.
Regards
Sabhani +91 9974804552

[Guest]

From : Y. M. Udnawalaa
E-mail : ymu1948 AT yahoo.co.in
Yashvant3735 AT gmail.com
Date : May 19, 2011
To,
Subject : application for the post of: Olefins DCS Operator--Ethylene/LDPE/GAS Plant/PDH Plant
Contract Employment is acceptable
Dear Sir,

I Undersigned venture to apply for the above-mentioned post. For your kind perusal, I am attaching my
Bio-Data here
I am B. Sc. with Chemistry. I am Healthy and physically fit..
Well conversant with Glycol Dehration System, Propane Refrigeration System.
I am having commissioning Nitrogen Plant Operation Experience, handled air compressor, Freon refrigeration unit, air dryer-molecular sieve, cold box.
I have got Petrochemical Plant Operation- OLEFINS -ETHYLENE STEAM CRACKER - Experience in Field & From Control Room-DCS (HONEYWELL) in gas separation like Methane, Ethane, Propane, Hydrogen, Mix C4..Operated Distillation Columns(Cryogenic),Gas & Refrigeration Compressors C2R & C3R , Gas Dehydration ,Multistage Gas Compression -Steam Turbine Driven , Fired Heaters-For Cracking of Naphtha & Ethane ,3 phase separators, Catalytic Reactors , well conversant with different types of pumps, flow measuring of liquid & gas, well conversant with PTW.
Well conversant with Precommissioning & Commissioning activities
.Well conversant with Extruder Operation-Pellatisation
Recently I worked with Toyo India Ltd, at IOCL-REFINERY , Panipat, India as Shift Incharge in Naphtha Cracker Ethylene Unit
From 23 Oct 2009 to 12th Jan 2010, in pre commissioning.. Area Worked on YOKOGOWA CENTUM 3000,through
MCR & through SRR.
I worked in Sharq -SABIC –ETHYLENE-Sabic, Jubail, Saudi Arabia, from 23rd February 2008 to14th May 2008 as DCS Panel Operator.
During this period I was involved in training locals and safe precommissioning jobs in Cracking Furnace like air blowing jobs.I was a contract hired By DAR AL RIYADH, Saudi Arabia.
Since January 1989 to September 2007, I was working as a DCS Console Operator (Process) TDC 3000 –(HONEYWELL)- in Ethylene Plant - Gas Separation / Gas Production Section (Cryogenic / Cold Section) of IPCL-Reliance Group of Industries.Responsibale for safe & efficient operation of the area assigned, safe start up/shutdown/emergency operation.
Gas Separating Are : Methane, (Liquefied Natural Gas), Ethane, Hydrogen, Ethylene, Ethane, Propylene, Propane, Mix C 4 S, and Py.Gasolene.
I have worked in all the area of the Ethylene gas plant like gas compression, gas dehydration, gas chilling & liquefaction & feed separation area, refrigeration compressors area (C2R & C3R ), acid gas removal tower section, cold and hot fractionation, fired heaters operations, catalytic reactors.
Responsible for sample collection & noting laboratory results, maintaining log sheet & logs. Conversant with SOP, Conversant with issue of work permit (Hot & Cold)., and aptitude for maintenance.
I am PC literate (MS OFFICE), well conversant with Loading/Unloading operation of Hydrocarbons and their storage.
Hoping to be favored and thanking you in the meanwhile.
Yours faithfully, YM Udnawalaa


BIO - DATA
NAME : UDHNAWALA YASHVANTLAL MOHANLAL
ADDRESS : B/183, Saurabh Park Society, Behind Samata Flats, P.O. Subhanpura,
Vadodara-390023 INDIA.
Tel. No. : +919974063915 - E-mail: Ymu1948 AT yahoo.co.in , yashvant3735 AT gmail.com
BIRTH DATE : 16th July, 1948 PASSPORT: Ready
QUALIFICATION : B.Sc. (Chemistry)
EXPERIENCE
I am having commissioning Nitrogen Plant Operation Experience, handled air compressor, Freon refrigeration unit, air dryer-molecular sieve, cold box.
1) Toyo India Ltd, at Panipat as Shift Incharge in Naphtha Cracker Ethylene Unit
From 23 Oct 2009 to 12th Jan 2010, in pre commissioning / commissioning
Area Worked on YOKOGOWA CENTUM 3000, DCS Panel, and in field compressors and field process equipments.

2) Sharq –Ethylene Sabic, Jubail, Saudi Arabia, from 23rd February 2008 to14th May 2008 as A DCS Panel Operator.
During this period I was involved in training locals and safe precommissioning jobs in Cracking Furnace like air blowing jobs.I was a contract hired By DAR AL RIYADH, Saudi Arabia.
3) IPCL-Reliance Industries Limited, Baroda, India
PLANT WORKED : GUJARAT OLEFINS PLANT -Ethylene Plant CRACKER
Duration : January 89 to September 2007 in this plant
Post : DCS CONSOLE / PANEL OPERATOR (Control Panel Operator – DCS –HONEYWELL
Area : Gas separation / Cold section/ Furnace Operation
Job : Cryogenic Area / Cold Section (+15 0C TO – 160 0C) & Furnace Operation
Gas Compression, acid Gas Removal, Gas Dehydration, Chilling, and Gas Separation & Refregeration.
Safe & efficient, Control Room DCS CONSOLE (Honeywell TDC 3000) panel operation, monitoring process parameters and controlling them, , I was looking after safe operation of three phase separators, Gas Separation Section, (Cryogenic) Gas Production Section in Ethylene plant, having low temp. & High-pressure Fractionation distillation. (Gases like Methane, Ethane, Hydrogen, Ethylene, Propylene, Propane, MixC4, and Py. Gasoline.), Catalytic Reactrs like Methanaor, Acetylene / MAPD Covertor.
Well Conversant with work permit for maintenance.
Worked in the area like Cracking Furnace, Hot Fractionation, Gas & Refrigeration Compression C2R & C3R-Steam Turbine Driven, Acid Gas Removal Tower, Gas Dehydrator ,Chilling Train & Cold (cryogenic) Area Distillation
I have worked in operations of areas (from control room & field)
- Multistage Gas Compression-Steam, Multistage Refrigeration compressors (C2R & C3R ) Steam Turbine Drive
- Methane Compression- Acid Gas Removal-Caustic Tower
- Dehydration, Chill-down train & cold fractionation (including MAPD & Acetylene converters)
- Cold Fractionation & Hot fractionation & Furnace Operation.
-Glycol Dehydration System.
I was responsible for safe start up, shutdown and emergency operation, and participation in annual shutdown activities. RESPONSIBLE FOR QUALITY ETHYLENE, PROPYLENE PRODUCTIONS DURING MY SHIFT.
Giving Training to fresh operators. Well Conversant with SOP. Writing shift log-sheets, shift log book.
I was responsible for loop check during precommissioning/commissioning & well coversant with PLC/ TRICONIX
For Emergency Shutdown System in the Plant. . And trouble Shooting/Process upset handling.
LDPE PLANT (Atochimi of France) - January '78 to November '83 (High Pressure Tubular Reactor Plant)
(SINCE COMMISSIONING)
As a operator Grade I, I was directly involved in the commissioning of this plant. Responsible for the safe operations of large gas compressors-compressing ethylene gas up to 2500kg/cm2. (NUOVO PIGNONE - Italy)
Operations of EXTRUDERS ZSK (WERNER & PFLIDERER) two lines-for palletizing of LDPE - of MFI 0.20 to MFI 40.00 Operations of ADDTIVES EXTRUDERS ZDSK, Operations of pre-and post extrusion equipments line M.D., D.C., drive Vibrating Screens, Centrifugal Dryer, Screen pack changing job, Blower operations, Loading & Unloading of hydrocarbons like LPG, Xylene and their storage operation, operations of cooling tower and pump-house.
Operation of Pneumatic conveying system and product storage in silos-bins. Monitoring of a wide a range of Process pumps. Monitoring of process parameters on Field Control Panel and changing them as per process requirements. Responsible for start-up-shutdown-emergency operations. Controlling of process parameters on local control parameters.
Vinyl Chloride Monomer Plant : November 83 to December 88 As a operator GR I, I was directly involved in the commissioning of this plant was responsible for safe operation of EDC cracking furnace EDC vaporisor. VCM/HCL Columns, VCM drys., Oxychorination Reactors, C3R Compressor, Air Compressor, Chlorine Compressors (Liquid ring).
Y M Udhnawala

[Guest]

I want piping fabricator job.

[Guest]

Sir i am a having bachelors degree in mechanical and Diploma in Process Piping Design and drafting ,would like to have opportunity to work in this field of piping with sound knowledge in basics and fundamentals my resume is posted below as a reference to that am suitable for working in this field
Objective :
To seek a position of an entry level piping engineer in a firm that will allow me to utilize my ability to work in a team and use my acquired knowledge in piping for benefit of the company
Software skills :
1. Piping Drafting : - Auto CAD.
2. PDMS :- MODULES
(1) Equipment modeling
(2) Piping Modeling
(3) Draft
(4) Iso draft
(5) Structure modeling
(6) Support Modeling

Academic Qualification :
- Diploma in Process Piping Design & Engineering per ASME B31.3 from Institute of Piping Engineering and Building Services, Hyderabad
- B.E (Mechanical Engineering) from from Muffakham Jah College of Engineering and Technology, Hyderabad.
- Intermediate (MPC) from Board of Intermediate Education , Sri Chaitanya Junior College, Hyderabad.
- Indian Certificate of Secondary Education (ICSE) From St Joseph’s Public School, Hyderabad
Technical skills :
*Proficient in - Preparation of G.A Drawings and Isometrics based on P&ID and plant layout.
- Pipe support and Rack design, Expansion loop design.
- Piping Material Selection/Specification/Valve Data Sheets.
-Pressure design of Process Piping and Component as per ASME B 31.3 [Straight Pipe, Flanges, Elbows and Miter bends, Reinforced branch connections, Blanks, Blind flanges, Expansion joints].
- Hydraulic design of Liquid Piping and Pipelines (Pipe sizing, Pump head & power calculations)
- Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning.
*Knowledge of - PFD and P&ID
- Equipment drawings
- Plot plan
- Process plant layout
- Piping Welding, Erection & Testing.
*Familiar with - International Design codes & Dimensional standards.
Viz : ANSI/ASME, API, BS, ASTM & there use in design, analysis and calculation

Projects :
Mechanical Projects :
Supra vehicle : Duration: 6 months , Members: 15.
- TEAM MJCET (2011-2012) was a team of 15 individuals to manufacture a formula type sports car designed and fabricated by students. As a member was involved in design and modeling of engine compartment of vehicle and also assisted the suspension and steering team in design and analysis with required calculations and values suitable for the vehicle to run in dynamic condition .
Other projects :
Title : Study of gas and steam turbines and air compressors (duration 15days)
Members -2
Organisation : BHEL
Abstract : A detail case study was done in manufacturing of various parts of gas and steam turbine and also balancing and testing of turbines of different capacities that company is manufacturing and also manufacturing and testing of centrifugal air compressors
Declaration :
I here by confirm that the information given above is true to best of my knowledge.
Yours Faithfully,
(MDMOHIUDDINKHAN)
- mdmohikhan AT gmail.com