Velosi certification LLC Qatar : PIPING SUPERVISOR

[Admin]

VELOSI CERTIFICATION LLC
Velosi certification LLC : Qatar : PIPING SUPERVISOR

Keywords: Piping

Company Profile
The Velosi Group, founded in 1982, provides quality assurance and quality control services to a number of leading national and multinational oil and gas companies, including BP, Shell, ExxonMobil and Chevron. The Velosi Group operates globally through four principal offices in the USA, the UK, Malaysia and the UAE and has operational or representative offices in a further 27 countries worldwide.

PIPING SUPERVISOR
Experience: 10 - 13 Years
Location: Qatar

Job Description
-- Check and verifying the drawing and specification familiarized on the construction details. Ensure that the drawing is in latest revision/edition and approved for fabrication and construction.
-- Monitoring inspection at implementation of project procedure, specification at method for statement. Coordinates with the sub-construction (Engineers, Supervisors and Inspectors) to ensure the compliance of quality assurance. Carried out visual inspection or line checking prior for hydro testing, pneumatic testing and reinstatement of pipe.
-- Supervise and monitor installation of pipe spool on above ground pipe rack and under ground pipe line.
-- Conduct punch clearing for rectified punched item and make confirmation to hand over to clientâs consultant for final walk down/punch listing and clearing prior to test requirements.

Desired Candidate Profile
Candidates possessing experience as a piping supervisor for a shut down project is preferred.

Address:
VELOSI CERTIFICATION
Office No.20, 6th Floor
Eli France Bldg., Ramada Jn.
DOHA,Qatar,Qatar 3408

Email Address:
devi@velosicertification.com
sunitha@velosicertification.com
http://www.velosi.com/

[Guest]

Libby G. Alvar
Resume
CAREER OBJECTIVE : To secure a responsible position with a progressive firm that will utilize my skills and experienced and provide growth opportunities.
SUMMARY OF QUALIFICATIONS :
- Ninth years “hands-on” experience and capabilities in Building and Piping Constructions.
- Average communication and interpersonal skills.
- Demonstrated planning, organizational, and implementation ability.
- Capable of working independently or as part of a team effort.
EXPERIENCE :
Company : PRO-BUILDERS INC. (May 2010 to Present)
Position : Construction Quality Control
Project : eBloc-2 - 17 Storey Building Project
Location : Asia Town IT-Park, Apas, Cebu City, Philippines
Highlight : A 17 Storey Building with Mat foundation and Isolated footings, 6 Storey Parking lot and 10 Storey Call Center offices with lot area of 3,800 square meter.
Duties & Responsibilities :
- Responsible for the materials requirement of the owner standard specifications.
- To follow-up and query the technical data and MDS of the product as per specs.
- To take Site visit and observed the sources of the materials supplied to the project.
- To conduct checking and undergo material testing at the qualified Testing Center.
- Responsible for the Work Request Permitting, RFI’s, SRF’s,Shop Drawing for construction.
- To supervise and checking the materials implemented at the construction site as per designed construction specifications.
- To check the dimensions and quantities of the materials prior the pouring commencement.
Company : GAMA Qatar (October 07, 2008 to March 17, 2010)
Position : Piping Engineer
Project : QatarGas 3& 4 LNG Onshore Project
Location : Ras Laffan Industrial City, Qatar
Highlight : QatarGas is one of the largest LNG Project and it’s already established itself as the no.1 exporter of LNG in the whole world.
Duties & Responsibilities :
- To carry out the construction Engineering Activities
- Responsible for the fabrication /Installation and controlling of the allotted groups to clarify the doubts and increase the production with minimum sources and without the tolerance to incident.
- To facilitate and focus the completion of construction works packs in a consistent manner and deliver all scopes through to installation and close out within the given time frames.
- Generate and review the job/task as per project design specification and standards.
- Planning and scheduling of early, progress and critical activity for site project implementation etc.
Company : Federal Builders Inc., Manila, Philippines, (Cebu Project) Oct ‘06 – Sept’08
Position : Field Engineer
Project : Imperial Palace Water Park, Spa, and Condominiums
Location : Lapu-Lapu City, Cebu, Philippines
Highlights : Six Building Units, 12th Storey Residential Condominiums
Largest Man-made Water park /Spa in Lapu-Lapu City, Cebu, Philippines
Slabs and Walls are all Precast Concrete
Foundation is Isolated and Raft Footing
Duties & Responsibilities :
- Total Responsibility for the implementation and coordination of four major working sections such as Form works, concreting works; rebar works, and pre-cast works of on-going six adjacent units Residential Condominiums constructed simultaneously.
- Supervising general foreman, foreman, lead man, and approximately 500 workers.
- Issue and submit Request for Information / Approval (RFI/A) and Confirmation of Verbal Instruction / Approval (CVI/A) to the Project Management Team on issues need to have a speedy answer and evaluation to avoid back jobs and delay of project duration.
- Prepare fortnightly schedule including manpower and equipment loading
- Conduct and preside Weekly Coordination meeting together with the Project Management Team.
- Inspect and ensure the availability of the materials sufficiently enough to supply the project material requirements.
- Initiate Weekly Toolbox Meeting regarding on Safety Awareness during Heavy Lifting Operations and reminding all Section Engineers and Key Personnel to utilized their Personal Protection Equipments (PPE).
Company : Cor Builders Inc. Tres Borces St. Mabolo, CebuCity, Philippines
Project : Korean Restaurant, School & Dormitory
Location : Pusok, Lapu-lapu City, Philippines
Position : Assistant Project Engineer Supervising & monitoring of (3) storey adjacent 2 building units
Company : Monolith Construction & Development Corp.
Location : Robinsons Cyber Gate, Edsa Cor. Pioner St. Mandaluyong City, Manila Phils.
Position : Site Engineer
Project : 28 storey Robinson Cyber Gate II Building. with 4 Storey Parking Area.

- Primarily involved in the safety of workers in the
site, responsible for the sanitation, housekeeping.
- Made reports to my superior.
Company : De Los Santos Construction
Project : Housing project of Philippine Estate Corporation.
Location : Suba Panas, Marigondon, Lapu-Lapu City
Positions : Field Engineer
Supervised & Estimates the Material/Labor Cost For the whole Project.

Company : 8990 Housing Development Corp.
Project : DECA HOMES
Location : Minglanilla, Cebu City
Position : Pre-Cast Engineer
- Monitoring & Supervising the whole Pre-Casted Low Cost Multi-Housing Project.

Company : VQS Construction
Project : DECA HOMES
Location : Tungkil, Minglanilla, Cebu City
Position : Assistant Project Engineer
Supervised the Concreting of Panel Casting, Erection & Finishing works,
Company : C M Furukawa Phils. Inc.
Unit 8 Regency Crest Bldg.
Banilad Road, Maria Luisa
Cebu city, Phils.
Project : Sun Cellular Cell Sites Project
Location : Cebu Province, Cebu Philippines
Position : Site Acquisition & Technical Engineer
- Responsible for site development, survey, documenting and acquisition of properties for Sun Cellular cell sites particularly in Cebu north & South provincial areas.
Company : Federal Builders Inc., Manila, Philippines, (Cebu Project)
Project : Cebu Hillton Condominiums, Resort & Spa
Location : Lapu-Lapu City, Cebu, Philippines
Position : Masonry works, Rebars, Concreting, & Post-Tension Engr.
Highlights : 23 Storeys Residential Condominium Building
It has 1 meter wide Bored Piles
Beams and Slabs are all Post-Tension in basements levels and in podium
Foundation is Isolated and Combined Footing
Duties & responsibilities:
- Responsible for rebar works, Concreting works, Post tension works, and finishing works implementations and operations.
- Supplying each trade workers a detailed and updated for construction plans prior to executions of works.
- Monitoring and supervising each trade workers in the act of execution of the work to maintain high quality and to avoid repetition of job due to lack of supervisions.
- Coordinate with other trade groups any issues of inconsistencies of given for construction plans.
- Defend the integrity of the given building specifications.

EDUCATION:
College: Cebu Institute of Technology-University (CIT-U), Cebu, Philippines
Courses: Bachelor of Science in Civil Engineering March '2002
Secondary School: Father Urios High School (FUHS)
Prosperidad Agusan del Sur, Philippines
Primary School: East Prosperidad Central Elementary School (EPCES)
Prosperidad, Agusan del Sur

[Guest]

CURRICULUM VITAE
MOHAMAD IFTEKHAR
E-Mail : -ifti_mallick AT yahoo.in
E-Mail : - iftekhardebbas AT gmail.com
Subject : Application for the post of – Purchase officer
Profile
A highly motivated and confident individual for whom working under pressure is nothing new, posses a strong flair and grasping ability developed through 13 Years Overseas and two years India working experience in various fields of Material Procurements and Controlling with the Material Procuring, Material Receiving, Material Storage, Inventory and field Material Computerize systems. All these experience is in the field of Constructions and Maintenance of Oil & Gas Petroleum, Petrochemical and Saudi Directorate General of the Royal Commission, with knowledge on best particles procedure under Systems. Since I have been in the suit ion, where sense of efficiency is important for taking on challenges I’m aware of the importance of time and have capability for completing tasks in given during.
Employment History
(A) Recently I’m working under Usha martin in India (overseas) Basamh Industrial Co Ltd & Rezayat Co Ltd. as “Purchase Officer” for Saudi Arabia Oil & Gas (ARAMCO), Petrochemical (SABIC) and Saudi Directorate General of the Royal Commission Projects, as well Procurement disciplines effected from April 1996 to till now
(B) I have worked for Voltas Limited (Joint Venture with Tata Iron &Steel Co), as a “Buyer” in Procurement department.
Essential Routine Profile
- Pre – qualifying bidder’s responses.
- Appearance Sealed bid opening packages and Issuing bid request.
- Coordinating Vendor and Engineering department for any question.
- Preparing Bid Tab, Commercial bid summary and recommending letters.
- Recommends and secures approvals in according with established Company procedures.
- Preparing and maintains control and all status reporting documents.
- Administers assigned Purchase Orders, Establishment the files and controls for all outgoing and incoming correspondence on each assigned.
- Communicating with suppliers as necessary to achievement required service and results from potential and actual suppliers to meet project needs.
- Communicating with engineering to assist or guide them in the preparation of material requisition for the procurement of materials and equipments.
Role & Responsibilities :
- Materials (Preparing Ordering, Purchasing, Expediting, Vendor Developments, Sealed bid Tab finalizing, Tendering, Receiving quantity and quality checking as per purchase order).
- Vendor selection, issuing bid packages, commercial bid evaluation, vendor drawing control, expediting, material management and project procurement coordination.
- Strong Commercial business sense, cost awareness and contract management.
- Procurement using Reverse auction On-line bidding and vendor’s developing.
- Increase the level of understanding amongst the engineering staff and contract users of the scope of the contracts as well as stimulate commercial and technical awareness.
- Maintain and archive contract files including Tender Board and related submissions, signed contracts, contract requisitions, correspondence and other relevant documentation.
- Purchasing of all necessary goods of proper quantity to produce without interruption, as to supply the finished article at the lowest possible cost.
- Follow up the receiving purchasing requisitions.
- Pleasing the quotation or tenders from suppliers for supplying goods of requisition quantity and quality in accordance with purchasing requisition.
- Selecting a supplier who met able to supply desired quantity and quality of materials with the desired items the most favorable terms and condition.
- Issuing purchasing order and purchasing enquiry to the selected supplier.
- Follow up these purchasing orders to ensure delivery of materials with in the specified time.
- Assembling documents certifying that the proper quantity and quality in ordered have been received.

[Guest]

CURRICULUM VITAE
Vinodkumar. K.V
E-mail- vinodeepkv AT yahoo.com
vinodkumarkvd AT yahoo.com
Post Applied For : Piping Construction Supervisor
PROFESSIONAL QUALIFICATION
- Diploma in Mechanical Engineering (Passed in 1988 with distinction from S.N. Polytechnic, Board of Technical Education, Kerala, India)
- Level I & II certificate of computer aided design and drafting (Auto CAD)
- Proficiency in MS Office.
APPROVALS & DRIVING LICENSE
- Approval from KNPC, Project department as a Mechanical Construction Supervisor. (KNPC Secondment Staff)
- Approval as a Welding & Fabrication Supervisor from KNPC, Mina Abdulla Refinery - Mechanical Maintenance.
- Approvals from KNPC, MAA, MAB & SHU refinery projects as a Mechanical / Piping Supervisor for various projects of M/s. ISCO, Kuwait.
- Approval from Kuwait Oil Company as a Mechanical Supervisor for M/s. KREMENCO Project
- Valued Kuwait Motor Driving License.
ATTENDED SAFETY TRAINNINGS BY KNPC SHE TRAINNING CENTRE
SHE Fundamentals, Work permit system & Risk assessment, Scaffolding safety inspection and tagging, Confined space entrant, PPE, Noise and H2S awareness, SHE Regulations, BBS SOLAR Awareness training, Emergency management, Area classification and Electrical safety, Hazards identification and control, ISO 14001 EMS Awareness, Hazards material, Rigging safety, Job safety Analyses, OSHAS 18001. etc.
CAREER SUMMARY
21 Years (15 years in Kuwait) of working experience in refinery and gas plant Mechanical construction and maintenance activities like piping construction, Equipment erection, Storage tank construction, Steel structure fabrication, piping & equipment maintenance and welding. Used international standards like ASME B-31.3, ASME B-31.1, ASME Sec. II, ASME Sec. V, ASME Sec. VIII, ASME Sec. IX, API 650, API 1104, API 2201 and KNPC & KOC Engineering standards.
PROFESSIONAL EXPERIENCE
- Experience in total activities related with piping fabrication and erection for refinery and gas plant projects.
- Total mechanical inspection of pipe line and issuing clearance for pressure test.
- Experience in supervising of welding – SMAW & GTAW.
- Experience in storage tank construction, Structural steel fabrication, Equipment Erection.
- Conversant with different material of pipe, fittings, Valves and gaskets.
- Piping tie-in and hot tapping activities.
- Conducting pressure test like hydrostatic and pneumatic.
- Conversant with all kind of construction, fabrication and machine drawings.
- Piping, structural and equipment material receiving inspection as per MTC.
- Executing all type of work permit inside refinery and gas plant and issuing work permit for new plant construction fenced area.
- Experience in fabrication and welding maintenance job on static equipment like Reactor, Heater, Heat Exchanger, Vessel, Tower, Boiler, Storage Tank etc. as per inspection advise ticket.
- Execution of hot work during preventive, Breakdown and shutdown maintenance.
- Welding of leak box / patch on live line of hydrocarbon, gas, steam and water.
- Execution of day-to-day maintenance work in refinery units pertaining to fabrication and welding.
- Supervising safety and related activities.
- Coordination with material procurement.
- Experience in preparation of invoices, time sheets and salary sheets etc.
- Provide field supervision and progress reports all Mechanical job
- Interface with Construction and operation team leads, engineering and construction contractors.
- Ensure that all construction work is carried out in accordance with permit to work procedures, Project drawing and project priorities, identify, and correct any deviation.
- Promote awareness of the company Health, Safety, Environmental & Quality policies and procedures to achieve fit-for-purpose Construction and Commissioning engineering.
- Active participation on near miss and incident reporting programs.
- Monitor competence of contractor staff to meet the appropriate professionals standard for the project execution.
- Responsible for ensuring the correct and proper implementation Management of Change Process.
- To co-ordinate the communication of Best Practices by active participations on reviews and propose improvement on Mechanical standards and guidelines.
- Review of contractor Mark-up drawings and hand over dossiers.
EMPLOYMENT HISTORY
1. M/s. Kuwait National Petroleum Company – Project Department
Working as a Mechanical Construction Supervisor (as a secondment staff through M/s. HESTON, Kuwait) since April 2011 onwards.
Project Description : Gas plant train – 4 Construction at Mina Al-Ahmadi refinery. Scope work was Mechanical Piping construction, Material Receiving inspection and Tie-in activities.
2. M/s. Gulf SPIC Contracting Company
Worked as a Welding and Fabrication Supervisor from January 2010 to March 2011 for Mechanical maintenance services at Mina Abdulla refinery , Kuwait.
Project Description : Mechanical Maintenance Services Project at Mina Abdulla refinery. Scope of my work was welding and cutting maintenance related job through welding work shop.
3. M/s. Kuwait National Petroleum Company – Project department
Worked as a Mechanical Construction supervisor from April 2006 to October 2009 (as a secondment staff through M/s. FINESCO Int’l Company)
Project Description :
New Ethane Recovery Project at Mina Al-Ahmadi Refinery :- Scope of my job was piping, Equipment and Tank Construction activities.
ROIV, HBSU & SERP at shuiba Refinery (GRTA 2006) :- Piping Tie-in activities, piping erection, Walk down inspection for mechanical clearance and punch clearance.
4. M/s. KREMENCO, Kuwait.
Worked as a Mechanical Supervisor from January 2004 to March 2006 for Kuwait Oil Company Project
Project Description : Revamping Services of production facilities at SEK GCs, KOC. Scope of work is separator replacement and related piping work.
5. M/s. ISCO, Kuwait.
Worked as a Piping Supervisor from October 1999 to January 2004 for various projects.
Project Description :
a) New Oil Pier Project at Mina Ahmadi refinery. Scope of work was the construction of onshore piping work. Main Contractor is Hyundai.
b) Installation of Splittter Vessel (V 13-06) and connected piping work at Shuiba refinery.
c) Additional DAF Package unit at unit 56 Mina Abdulla refinery. Scope of work is the construction of piping work.
d) Petroleum Hydro treating Catalyst plant Project at Mina Abdulla Industrial area for Kuwait Catalyst Company. Scope of work is piping construction. Main contractor is Hyundai.
e) M.V. Mawashi Al-Gasseem (Marine Ship) Maintenance work at shuwaik Port. Scope of work is piping and structural Maintenance work on deck and engine room.
6. M/s. Al-Metrik Gen. Contracting Co. Kuwait.
Worked as a Mechanical supervisor from October 1998 to September1999.
Project Description : Ship Maintenance work in KSRC Ship yard.
7. M/s. AMCO, Kuwait.
Worked as a Mechanical Supervisor from September 1996 to October 1998
Project Description : Structural Steel Fabrication in company workshop for various KNPC and KOC projects.
8. M/s. Bridge & Roof Co India Ltd. Bombay, India.
Worked as a Site Engineer from January 1995 to March 1996.
Project Description :- Piping construction of MTBE project at Bharat Petroleum Corporation Refinery , Bombay, India
9. M/s. Gopinath Engineering Co. Ltd. India.
Worked as a Site Engineer from May 1993 to January 1995 .
Project Description :- Piping construction of High Efficiency Boiler Project and Mechanical Maintenance contract work for Bharat Petroleum Corporation, Bombay, India.
10. M/s. Vishal Enterprises, India.
Worked as a Engineer – Welding and Fabrication from April 1991 to April 1993.
Project Description : Mechanical Maintenance Services Project at HPCL, Bombay. My scope of work was welding cutting related maintenance activities, Heat exchanger maintenance activities.
11. M/s. SCIL India Ltd.
Worked as a Fabrication and Welding Supervisor from March 1989 to March 1991 project at
Project Description : Piping, Structural steel and Storage Tank fabrication for Refinery maintenance and new construction projects for HPCL Refinery, Bombay India.

[smkssb]

MOHAMED KHALEEL. S
E-mail : smohdkhaleel AT gmail.com

OBJECTIVES : - Seeking a demanding Managerial position in the field of Quality Assurance & Quality Control functions in your esteemed organization which offers scope for customer Satisfaction & Improvement in system and attainment of business Advancement & Reputation.
CAREER : - Professional Mechanical Engineering background with noteworthy
SUMMERY : experience Over 22 Years (15 yrs Gulf + 7 yrs India) in the field of Power, Industrial, Oil/Gas & Petrochemical industries. The quality functions carried out with a proven track record Leadership Capabilities and widespread Staff’s Supervision. Extensive experience in various related engineering activities and practices which specialization in Construction & Erection works related to Machining, Fabrication and Painting of Steel, Aluminum and other metals.

HISTORY :
- B.E. (Industrial Production) Degree Secured “First Class” result in the
EDUCATION :
year of 1989 from "BVB College of Engineering & Technology", belongs to “Karnataka University” at Hubli, Karnataka, India.
- ISO 9000-2000 : Lead Assessor (IRCA) Course and examination passed in Sept 2005, from "BVQI", at Jeddah, Kingdom of Saudi Arabia.
- ISO 9000-2000 : Internal Audit Course and Certified in Dec-2004 from "VELOCI", at Muscat, Sultanate of Oman.
- AWS–CWI course and Examination Passed in July 1997, from "AMERICAN WELDING SOCIETY", at Chennai Center, India.
- N.D.E. Level – II of ASNT in PT, UT, RT & MT and RT Interpretation passed in 1994 from "NDT CENTER", at Mumbai, India.

PROFFISIONAL : - ISO – 9000 ‘Quality Management System’ Course duration 40 days in
TRAINING 1994 from jointly organized by “REGIONAL TESTING CENTER”, “ALL INDIA MANUFACTURING ORGANIZATION” & ‘SISI’ at Chennai, India,
- MS – Office Windows-2000 (Word, Excel, Access, Power Point & Internet Access) 60 days Course in 1997 from ‘OASIS COMPUTER’ at Abudhabi, UAE
- Conversant software - Auto CAD : Version Release 2006, Planning: P3 Primavera, Drafting: Xsteel
- HSE – Courses attend in HSE Induction, H2S Awareness, Permit holder, Permit applicant, Supervisor’s safety, Job hazard’s analysis From various specialized "TRAINING CENTER" and "PETROLEUM DEVELOPMENT OF OMAN" at Sultanate of Oman.
QA/QC :- Approved as QA/QC Manager in April 13, 2005 by ARAMCO, KSA.
APPROVAL : WR Projects Inspection Department, WJ-155, RM, S-017, South, Jeddah

- Approved as QA/QC Manager in April 13, 2005 by PDO, Oman Onplot-EMC Contract for North division

FUNCTIONAL : - Quality Planning & Control
ACTIVITIES : - ASME Quality Control System Establish & implementation
- ISO-9000 Quality Management System Develop & implement
- Feedback to Engineering, Production, Purchases
- HSE-System implementation & monitoring
- Preparation of Quality Plans / ITP
- Preparation and Qualifying of WPS, PQR & WPQ
- Welding Process SMAW, SAW, GTAW, FCAW & GMAW
- Various type of machining Light & Heavy
- Structural light & heavy Fabrication, Assembly & Erection
- Process Piping & Flow lines (Off-plot & On-plot)
- Third Party Inspections & Expediting.
- Non Destructive Examination RT, UT, MT, PT & VT
- Standards & Codes of ASTM, ASME, API, ANSI, AWS & BS
- Inspection : Dimensional, Plumbness, Peaking, Banding, Leveling
- Leak Testing : Hydrostatic, Pneumatic, Diesel, Vacuum
- Material and weld Testing for PMI
- Calibration of instruments and gauges and regular updating
- Validating of welders cards and upgrading qualifications
- Heat treatment and Mechanical testing
- Blasting and painting inspections (Surface profile, DFT, Holiday and etc)
- Skillful Computerized Control Application & Documentations.

INDUSTRIAL : - ASME Code ‘U’ & ‘PP’ (Pressure Vessel & Power Piping) holding
CERTIFICATION : hard “Stamps” with “Certificate of Authorization” Award to “PROFAB” Company based at Abudhabi – UAE. In the year of 1997 I was completely responsible for System Development, Manual Preparation, Implementation & maintenance

- ISO 9001 :1994 Accreditation, to “PROTECH” company based at Abudhabi -UAE in 1997. I was completely responsible for Certification of ‘Quality Management System’ establishing of System, Documentation, Implementation & Maintenance

- ISO 9001 :2000 Accreditation, to “AL ROMAL GOLDEN PETROLEUM SERVICES” company based at Yibal - OMAN in 2004. I was completely responsible for “Quality Management System” establishing of System Documentation.

- ISO 9001 :2000 Accreditation, to “AL ZAMIL METAL WORKS FACTORY” Company based at Jeddah – KSA. In the year of 2005. I was completely responsible for Certification of ‘Quality Management System’ establishing of System Documentation, Implementation Maintenance & Training employees.

- ASME Code ‘U’ & ‘R’ (Pressure Vessel & Repair) Stamps with ‘Certificate of Authorization’ Award to Company AL ZAMIL METAL WORKS FACTORY” in 2007. I was completely responsible for System Development, Manual Preparation, Implementation & maintenance

PROFESSIONAL WORK EXPERIENCE :
I. STS (Special Technical Services)
Muscat, Sultanate of Oman.
Engineering, Maintenance and Construction Contract for PDO North Onshore Oil field.
- Works : Multi discipline (Mechanical, Civil, Electrical & Instrumentation) including Shop manufacturing, Site construction, Erection, Repair and Maintenance works of Mechanical related to Process Tanks, Hot-tapping Main Oil Pipeline, On-Plot (Pressure Piping, Equipments & structure), Off-Plot (Flowlines & Pipelines) and Structural works, , Electrical related to Power facilities, Civil related to fields work, Foundations & Buildings, Instrumentation related to Measuring Equipments, ,
- Designation : Working as a ‘Sr. QA ENGINEER’ Since from April 2011 to till now and reporting to Div QA Manager.
- Duties & Responsibilities : Job orders review and finding out exact quality requirements including contact Documents & Drawings. Preparation of quality assurance documents for each job (Quality Plans, Process Procedures, Quality control procedures, Inspection and Test Plans, WPS, PQR and WPQ). Conducting WPS & Welder qualification Tests. Developing of system forms, Implementation of procedures, Documents & Data Control & Up-dating, Shop & Site Inspections assignments & Control. Arranging for getting Acceptance from client Inspectors, Arranging for Various Testing, Calibrations & Re-validations, attending regular meetings with top management and clients, Achieving and meeting the PDO specification & Acceptance to International Standards & Codes requirements. Subcontractors and suppliers development and conducting regular assessments. Preparation of Final QC Dossier. Conducting regular ISO system audits. And routine ISO system maintenance and reviews.

II. AL ZAMIL METAL WORKS FACTORY (AZ & AZTRACON) Jeddah, Kingdom of Saudi Arabia. :
Manufacturer and Contractor of mechanical works (Fabrication & Painting) for Oil fields, Petrochemicals, industrial and General projects of major National and International Clients

- Works : Shop manufacturing, Site construction, Erection and Repair works of Bulk Petrochemical Storage Tanks, Process Tanks, Pressure Vessels, Stacks, Chimneys, Conveyors, Cranes, Building Structures, Boiler Ducts, Heavy Steel Structures and Pressure Piping.
- Designation : Worked as a ‘QA/QC MANAGER’ Since from March 2005 to March 2010 and reporting to Assistant General Manager.
- Duties & Responsibilities : Pre-bid Review of customer Job/contact Documents & Drawings. Preparation of quality assurance documents for each job (Quality Plans, Process Procedures, Quality control procedures, Inspection and Test Plans, WPS, PQR and WPQ). Developing of forms, Implementation of procedures, Documents & Data Control & Up-dating, Shop & Site Inspections assignments & Control. Arranging for getting Acceptance from client/Third party/Authorized Inspectors, Arranging for Various Testing, Calibrations & Re-validations, attending regular meetings with top management and clients, Achieving and meeting the clients specification & Reference International Standards & Codes requirements. Subcontractors and suppliers development and conducting regular assessments. Preparation of Final QC Dossier. Conducting regular ISO system audits. And routine ISO system maintenance and reviews.

III. AL ROMAL GOLDEN PETROLEUM SERVICES, Yibal/Fahud/Lakhwair (PDO-North) - Sultanate of Oman. :
Contractor of Oil and Gas fields for PDO (Petroleum Development of Oman), JAPEX Petroleum and ACCIDENTAL Petroleum, PETROGAS.
- Works : Shop construction and Site erection of Piping Flow lines, Steel Structures and Concrete Foundations and Pigging Services of Oil Station and well site fields.
- Designation : Worked as a ‘QA/QC MANAGER’ Since from Dec 2003 to Dec 2004 and reporting to Managing Director.
- Duties & Responsibilities : Reviewing of Job Documents & Drawings, Preparation of QA/QC Procedures, Implementation of procedures, Documents Control & Up-dating, Preparation of as-built drawings, Shop & Site Inspections, Arranging for getting Acceptance from Authorized Inspectors, Various Testing, Calibrations & Re-validations, Meeting the Clients Specification & Reference International Standards & Codes and Preparation of complete QA/QC Dossier.

IV PROFEN, :
Wajukotag Marg, Fort Mumbai, India
Third Party Services of Engineering Inspection, Consultancy and Expediting works.
- Works : Projects, Construction Works at Site Field and Shop Floor, also at Various Manufacturing Units. Complying with client’s, National and international standards and various documents review and approving
- Designation : As ‘INSPECTION MANAGER’ worked from Dec 2000 to Nov 2003 and reporting to Director.
- Duties & Responsibilities : Contract Review, Document Review, Document Control, System & Method Development, Providing Documental Assurance to client, Studies of Clint Requirement and finding solution, Inspection Assignment, Visits Arrangement for Inspection, Work getting done in Time.

V PROFAB, Mussafah, Abu Dhabi, UAE :
Manufacturing of, storage tanks, Pressure Vessels, Light & Heavy Structure, Pressure piping related to Oil Field, Marine & General Works.
- Works : Oilfield (ADNOC, ADGAS, ZADCO, GASCO, NPCC) , Industrial, Power and fence various projects related to Shop Fabrication, Powder Coating, Blasting & Painting
- Designation : As a ‘QA/QC MANAGER’ worked from July 1995 Sept 2000 and reporting to ‘Plant Manager’.
Duties & Responsibilities : Developing, Planning & Implementation of Quality System. Preparation of Quality Manual, forms & Quality Procedures. Preparation of Quality assurance documents and Records with respect to job requirement and getting approval from client. Client and our Company’s Quality System Implementation for each job. Third Party Inspection follow-ups. Identifying & Ensuring Achievement Clint’s specifications & International Standards & Codes. All stage inspection & Reports preparation, Identifying quality problems and Rectifying giving feed back to concerned departments. Finally Preparation of QA/QC Dossier / Test Pack for each job orders.

VI V.M. CORPORATION, Sewri, Bombay, India. :
Manufacturers of Pressure Vessels & Heat exchangers.
- Works : Fabrication and Machine shop
- Designation : As a QUALITY CONTROL ENGINEER worked from June 1994 to June 1995, and reporting to General Manager.
- Duties & Responsibilities : Drawings & Documents verification, all stages inspections, Handling of clients & third party inspectors, ensuring the required specifications. Preparation of all inspections reports and documents, Quality feed back to production.

VII AL BABTAIN Group of industries, Riyadh, KSA. :
Manufacturers of Heating Boilers, Transmission Towers & Lighting Poles.
- Works : Fabrication, Machine shop, Tool room, Galvanizing and Blasting & Painting.
- Designation : As a QUALITY CONTROL ENGINEER worked from may 1992 to May 1994, and reporting to QA/QC Manager.
- Duties & Responsibilities : Design & Documents verification, all stages inspection & testing, Preparation of reports and documents, meeting the client’s Specifications, Standard and Codes.

VIII HABY ENGINEERING WORKS Pvt. Ltd. Kanjur Marg, Bombay, India. :
Heavy Machining, Turnkey Fabrication & Erection projects and contractors of Nuclear power projects
- Works: heavy fabrication, Heavy Machine shop.
- Designation: As a QUALITY CONTROL ENGINEER worked from May 1990 to May 1992 and reporting to Technical Director.
- Duties & Responsibilities: All stages inspections, offering inspection and coordinating with clients/third party inspectors for getting approvals at each stage, Preparation of Reports, Follow up and achieving of Clients Specifications.

IX KARNATAKA PRESS TOOLS, KR Puram, Bangalore, India.:
Manufacturers of Jigs, Fixtures, Gages and Press Precision Components.
- Works: Tool Room and Machine Shop.
- Designation: As a ‘SHOP SUPERINTENDENT’ worked from May 1989 to April 1990 and reporting to ‘Technical Director’.
- Duties & Responsibilities: Complete in-charge of production planning and Quality control activities for high precision close tolerances works.

PERSONAL - Father Name Sabjan Saheb
INFORMATION - Date of Birth & Age 01-06-1964 & 47 Years
- Nationality Indian
- Marital Status Married
- Religion Islam
- Passport No. H8439045
- Languages Known English, Arabic, Hindi, Urdu & Kannada.