ProgeCAD Evaluation Procedure Model question Paper : www.sbtetap.gov.in State Board Of Technical Education And Training

[mariammal]

ProgeCAD Evaluation procedure:-
Section-1 :
Internal Marks (40% weitage on total marks under the consideration of following aspects)
Attendance
Punctuality
Regularity
Participation
Behavior

http://sbtetap.gov.in/view/Notificat...d=Notification
sbtetap.gov.in/Notification /20-12-11-55281progeCAD_Evaluation_procedure.doc

Section-2 :
Theoretical/PaperTest
Objective or descriptive type test on progeCAD software
Section-3 :
Practical System (60% weitage on total marks for section2&3)
Two hours practice on practical drawings

Choose the correct answer for the following questions :
1) ADS
a)AUTOCAD Development System by Autodesk
b) Advanced development systems
c) AUTOCAD development system by progeCAD
d) Advanced development systems in AUTOCAD

2) To find out what a specific tool on a toolbar does pause the cursor over it for a moment? a)cross hair b)tooltip c)insertion point d)none
3) Function of centre mouse button ___________________
a)zooming b)moving c)pan d)all of the above
4) For changing the object properties ____________ command should be used.
a)ch b)cha c)co d)cho
5) Context menu in Autodesk AutoCAD is ____________ in proge cad.
a)promtboxes b) commandprompts c) history d)all of the above
6) Function of spacebar in progecad is ____________
a) moving b)end of command c) repeat last command
d)both b&c
7) To display the history of command bar_________ shortcut key should be used.
a)F1 b)F2 c)F3 d)F4
8) Function of shift+mouse left click__________
a)dragging b)entitysnaps c)deselect d)none
9)Expand OLE____________
a) object link with expansion
b) object link with embedded
c) object link entities
d) all of the above
10)__________ Layer can’t be renamed.
a)current layer b)zero layer c)next layer d) both a&b
11) _________ Menu UCS will be observed.
a)tools b)view c)edit d) format
12) F7 is the shortcut for __________ button.
a)ortho b)grid c)snap d)esnap
13) To toggle between isometric planes_______ function key is used.
a) F1 b)F2 c)F3 d)F4
14) Function key for ETRACK__________
a) F1 b)F4 c)F7 d)F11
15) Minimum and Maximum sides of polygon______________
a) 0 to 1225
b) 0 to 1024
c) 3 to 1024
d) 0 to 1225
16) Shortcut for CHAMFER________
a) ch b)cha c)cham d)cho
17) For changing the layer properties ________ menu should be used.
a) Format b)Edit c) View d) Tools
18) In what menu spell check should be observed?
a) Format b) edit c) View d) Tools
19) Which command is used to break the object?
a) break b)break at point c)explode d) both a&b
20) Maximum no. of decimals provided in progecad______
a) 3 b)5 c)8 d)10
21) Hatch pattern file extension________
a) PAT b) BMP c) DWG d) SLD
22) Which of the following is not an arc command?
a) 3point
b) START,CENTER
c)START,END
d)START,CONTINUE 23) Line type file extension_____
a) .LNT
b).PAT
c).DWT
d).DWG
24)1 K Bytes______bits.
a)1024
b)112
c)118
d)1112
25) In AutoCAD 2000 how many layers will be created?______
a) 11556
b) 256
c) infinite
d) none
26) Paper size for A1_____
a) 597*840
b) 297*520
c) 210*297
d)420*597
27) slice is used to_________
a) cut the faces
b) delete the faces
c) remove the faces
d) expand the faces
28) In isometric views _________dimensions are used.
a) aligned
b) oblique
c) linear
d) all of the above
29) Cad is ______level language.
a) low
b) middle
c) high
d) all
30) In the below which one is not Boolean operation?
a)union
b)Intersection
c)subtraction
d)interface

Fill in the blanks for following :
31)drawing file format for progeCAD_________
32) expand XREF______________
33) Shortcut key for plot option______________
34)___________ Layer is the default layer in progeCAD.
35)_______ Colors will be available in progeCAD.
36) To create two-dimensional isometric drawings __________ toggle key should be used from the status bar.
37) Symbol for point snap_______
38) Xline is also called__________
39) To draw the two parallel lines ________ toolbar used.
40) To calculate the area of a irregular object which option should be used 41) define the edges of a three-dimensional entity -------
42) A window that displays all or a portion of a drawing’s model space-----------
43) A Cartesian coordinate system with origins and orientation defined by the user is-----------
44) A command started while another command is already active-----------
45) A curve generated along the path of three or more control points by using------
46) A visualization technique in which all surfaces of a model are shaded as with------------
47) A line that starts at a designated point and runs infinitely----------------
48) A view of the drawing from above, looking down the z-axis perpendicular to the xy plane of the current UCS-----------
49) Expand PDF____________
50) For donut shapes which solid can be used?----------
51) The process of converting a two-dimensional entity into a three-dimensional entity can be stretched by using------------- command.
52) Expand DXF ------------
53) Acronym for CAD -----------
54) Three Boolean operations in progeCAD are_______,______,____
55) To delete or separate the objects in 3dimensional view --------------command should be used.
State true/false for following
56)F10 is used for grid options. True/False
57)Can see line weights in model space. True/False
58)In AutoCAD file no.of layouts are available. True/False
59)Editing the objects is possible when locking the layer. True/False
60)UCS stands for universal co-ordinate system True/False