www.iocl.com Vacancies 2012 Indian Oil Corporation Limited : Apprentice

[muthukalee]

Name of the organisation : Indian Oil Corporation Limited ( iocl.com )
Name of the post : Vacancies for Apprentice in 2012

Gujarat Refinery, the flagship refinery of Indian Oil invites applications from bright, energetic and result oriented candidates of Indian Nationality for engagement as Apprentices under Section 8(3A) of the Apprentices (Amendment) Act, 1973 & 1986 in the following trades;

Discipline No. of Positions
Chemical/ Petrochemical Engineering 07
Electrical Engineering 03
Instrumentation Technology 03
Mechanical Engineering 02

https://www.iocl.com/PeopleCareers/job.aspx
https://www.iocl.com/uploads/Advt_08...ain_gujrat.pdf

Minimum Qualification and Experience :
• Diploma in Chemical/ Petrochemical/ Electrical/ Mechanical or Instrumentation Engineering. The prescribed qualification should be from a recognized Institution / University and as a regular student of full time course.
• Candidate should be fresher only and the gap between the date of declaration of result and the date of engagement should not be more than 3 years.
• The candidate must not have work experience of more than one year.
• The candidate should not have undergone Apprenticeship training earlier.

Age Limit : Minimum 18 years and maximum 23 years, as on 01/12/2011.

Candidates fulfilling the eligibility criteria should send their neatly typed applications in the prescribed proforma on a plain paper (A-4 size), duly signed with latest passport size photo along with photocopies (duly attested by a Gazetted Officer) of Diploma/ SSC Mark sheets, Diploma Certificate, Date of Birth Proof (HSC/ SSC Certificate only), Experience Certificate (if experienced) and Caste Certificate (if applicable).

The cutoff date for reckoning educational qualification, experience, age, domicile etc. shall be 01/12/2011.

Filling up of apprentices positions is at the discretion of management based on suitability of candidates. The decision of the management in all matters relating to eligibility, acceptance or rejection of the application, mode of selection will be final.

Candidates should super scribe the Name of Discipline Applied for & Discipline Code, on the top of the envelope. The applications are to be sent to :
Chief Human Resource Manager,
Gujarat Refinery, Indian Oil Corporation Ltd.,
PO: Jawaharnagar,
Dist: Vadodara – 391 320,
latest by 05/01/2012.

[Guest]

Dear sir
Please find attached file
Regards
SanjeevKumar Rajak

[Guest]

i m 10+2 and allready doing job in gass agency.
i want make my career in this field. what should i have to do?

[Guest]

Sir i am a SAP ABAP certified candidate.I want o to know is there any abap vacancies in IOC.

[Guest]

Sir, i am a mechanical engineer, course completed from M.G University. I have backlogs. can i apply- Kindly reply. Thank you.
Contact :- rifais7 AT yahoo.com

[Guest]

CURRICULUM VITAE
PATEL HITESH B.
E-mail : patel_hitesh222 AT yahoo.co.in
¤ Carrier Objective :
In the era of HIGH VOLTAGE & POWER SYSTEM, with the dedication of work, become the expert engineer in the field of Electrical Engineering.

¤ Current status :
Completed Diploma in Electrical Engineering at Dr. J.N.Mehta Govt. Polytechnic, Amreli affiliated with T.E.B (2003-2005).
Now, working as a Engineer in MET-TRADE INDIA LTD. – Anjar (Kutch) Plant is a well-known organization active in Aluminum Casting.
¤ Job discription :
(1) Job Duration : 10th December, 2010 to till date
(2) Company Profile : MET-TRADE INDIA LTD. is a largest
Aluminium Casting Plant in Anjar.
(3) Plant under responsibility as Engineer
- Handling the plant as a Shift engineer.
- Looking over the ISO 14001 & 18001 document
- Cooperate with seniors to trace ISO 9001 Quality Management System & OHSAS 14001 & 18001in plant and maintain related documents. Handling the calibration of the entire instrument which is in the plant.
- Looking over the indent of the plant (Electrical Dept).
- Handling the Breakdown.
- Preventive maintenance of each and every machine.
¤ Job profile :
- Operation & Maintanance of star-Delta, DOL and Forward-Reverse Starter, PDP &MDP Panel.
- Knowledge of PLC fundamentals, hardware configuration and programming like Siemens Make S7-400,300,200.
- Operation and Maintanance of AC &DC motors and EOT Cranes.
- Speed control of AC Motor through AC Drive like Siemens Micromaster 440, 420, ABB, Alen Bradly and DC Motor through DC Drive like Siemens 6RA70.
- Field Devices like control valve, Thermocouple, Limit switch, Proxymity switch, RTD, Water level controller, Thermostate, Photo Electric sensor, Modulating Motor, Pressure switch, Teperature Controller.
- Operation and Maintenance of Power and Distribution network (which consists of 12.5MVA, 2MVA and 3MVA Transformer, L.T Panel (3200 Amp), M.C.C (800 Amp Popular Switchgear Make).
- Electrical maintenance of MCCB, SDFs, fuses, Contactors, Starters, MPCB, and Digital Protective relays MCC panel, Electrical motors.
- Operation and maintenance of ACB (400A to 4000A), VCB (1250A, 25KA, TYPE : VD4, ABB MAKE).
- 12.5 MVA Transformer, CT, PT, Isolator switch 66 Kv transformer control and Relay panel, RTCC panel, Battery Charger, VCB, SF6 Circuit breaker Maintenance and trouble Shooting.
- Knowledge of automatic power factor correction solution for variable loads.
- Knowledge of all types digital protection relays (Over current - Earth fault, Over voltage – Under voltage, Master Trip, Supervisory, Oil – Winding and Buchhoz, Restricted relays etc).
- Testing and commissioning of plant lighting system, Routing and laying of HT/
LT Cables including glanding, termination and jointing and fabrication, Erection
of cable tray.H.T/L.T cable lying, Glanding, Termination.

PREVIOUS EMPLOYED :
Organization :- Man Industries (India) Ltd.
Village : Khedoi, Tal: Anjar (Kutch)
Designation :- Jr.Engineer
Division :- L-saw, H-saw and Pe-coating.
Duration :- September-2008 to October-2010.

PREVIOUS EMPLOYED :
Organization :- Rajdeep Electrical Pvt. Ltd.
Kandla Port Trust (Kutch)
Designation :- Site Engineer
Division :- HT Line just like Erection, Commissioning & Testing of 66/11
KV Sub Station.
Duration :- 2 Years
¤ Educational Qualification :
Qualification Percentage Year of Passing University/Board
S.S.C. 81.57 % March-2001 G.S.E.B.
H.S.C. 47.38 % April-2003 G.H.S.E.B.
D.E.E 67.17 % Dec-2005 T.E.B
¤ Elective Subject :

- High Voltage & Power System.
¤ Interested Subjects :
1). Power Station Engineering
2). Industrial Instrumentation.
3). Switch gear & Protection
¤ Computer Skills :
1) Operating Systems : DOS, Windows.
2) Programming languages : C.
3) Software: MS- Office, My Power,
SKM Power Tool.
I here by declare that all the above statements are true to the best my knowledge. Looking To my above stated particulars you are kindly requested to give me a chance for an Interview, I also assure you that I would satisfy my superior with best of ability if I am selected.
Yours truly,
Thank you.
(Hitesh B. Patel)