Resume CV : CAD Designer

[mmsaravanakumar]

SARAVANAKUMAR
Email :mmsaravanakumar AT ymail.com

Employment History :
July 2007 - June 2008
1. Tanker Pacific Offshore Terminals Pte Ltd
Position Title (Level) : Draftsman (P&ID, Structural) (Senior Executive)
Specialization : Engineering - Civil/Construction/Structural
Role : Civil/Structural Drafter
Industry : Oil / Gas / Petroleum
Monthly Salary : SGD 4500
Work Description :
To do the modification of P& ID drawings, to prepare construction drawings for the conversion & demolition works in P&ID, Prepare structural Drawings for FPSO & prepare fabrication & shop dwgs for the flare boom, small bore pipe supports, Cable tray supports. To do the amendments & updates drawings for Cargo Oil & water ballast system, Aux. Sea Cool water, Sea water lift system, sewage treatment system, Bilge & Ballast system for the FPSO-tanker conversion, update the Isometric dwgs of piping layouts. To take measurements on board site & preparing As-Built dwgs for P&ID & Structural Modification in CAD, & To do 3d structural modification in PDMS. Perform actual design and drafting works (such as Boiler-Piping and Supports, Boiler Casing, Ductings and other heavy structure and machinery parts), Plan, schedule and control all activities of the group, Check all detail design drawings before submitting for approval Prepare tender documents and design
May 2006 - July 2007

2. Apecs Offshore Pte Ltd, (Swiber Group)
Position Title (Level) : Draftsman (Structural) (Senior Executive)
Specialization : Engineering - Civil/Construction/Structural
Role : Civil/Structural Drafter
Industry : Oil / Gas / Petroleum
Monthly Salary : SGD 2500
Work Description :
Preparing 3D structural modeling for FPSO- SWIBER Conquest, Preparing 2D drawings, sketches, shop drawings, structural drawings & fabrication drawings for Self Elevating drilling Unit, Jack up Barge, accommodation barge, Preparing 2D & 3D drawings for installation sequence of Mid Water Arch, Making 3D modeling & perspective views for spud can designs, Making drawings of SPM (Single Point Mooring) for FPSO & Tug Boats as per Lead Project Engineer’s (Mooring) Instruction, Preparing & modification of 2d structural drawings for hull (SWIBER-Conquest) as per design engineers calculation & instruction.
Making 3D structural model for Helideck, TRAM & EISR Module for Well Head Platform for the OMV-Marri Clough Project, Preparing 2d structural dwgs for fabrication of TRAM (Temporary Refuge & Accommodation Module) & EISR (E & I Switch Room) as per instruction of the Design Consultant.
Oct 2005 - Apr 2006

3. Fero Steel Engineering Sdn Bhd
Position Title (Level) : CAD Engineer (Team Leader) (Senior Executive)
Specialization : Engineering - Civil/Construction/Structural
Role : Civil/Structural Drafter
Industry : Construction / Building / Engineering
Monthly Salary : USD 1000
Work Description :
To make the drawings from the civil foundations, So target the job & give up the schedule to the clients, feed back to the site engineers as well as the contractors for execution work, making transmittal drawings & attend the meetings with clients & contractors, Make weekly progress, etc., All the old drawings was made up of at 1973 in France & German language, So We update the Technical data’s in CAD, We Redesigned, analysis, & modify the design requirements for the execution, Produce Foundation layout, Sections for Ladle turret, tundish, Continuous Casting machine, CCM Foundation, CCM Buildings etc.,
Oct 2003 - Sep 2005

4. Glass Fibre Reinforced Concrete (M) Sdn Bhd,
Position Title (Level) : CAD Draughtsman (Senior Executive)
Specialization : Engineering - Others
Role : Supervisor/Team Lead
Industry : Architectural Services / Interior Designing
Monthly Salary : MYR 2500
Work Description :
To make detailed drawings from preliminary survey sketches & specification given by Architectural & structural lead design engineers, to do the Cost analysis for every project, to make work schedules, etc, Prepare standard drawings for civil & structural as per IS Standard specification code, making construction drawings & as built drawings. Prepare a detailed plans, section, elevations & workshop drawings for fabrication, make 3D modules used by CAD (2004, 2002 & 2000), etc,
Worked as a Cad Draughtsman with a team of six CAD technicians, & making decisions in execution of structural & architectural works, received a good incentives & increments for the quality output.
June 2002 - Aug 2003

5. Vytel Asia,A division of Leighton Contractors (M)
Position Title (Level) : CAD Draughtsman (Civil & Structural) (Junior Executive)
Specialization : Engineering - Civil/Construction/Structural
Role : Civil/Structural Drafter
Industry : Telecommunication
Monthly Salary : MYR 2500
Work Description :
Maxis are the one of the leading communication private limited in Malaysia. This project deals with the installation of the telecommunication base station infrastructure, We tie-up a team,(team size was built up by 3 lead design engineers, each lead engineer have 5 cad technicians) meet the deadlines to prepare the Structural drawings, construction drawings, site sketches, which we made drawings through by the pre-implementation survey report from our site-coordinates. Cabin cable ladder layouts, equipment & lightning layouts, earthing & power supply layouts, cabin internal & external elevations, minimast foundation & structural detail drawings, M-cell arena foundation detail drawings and general notes. Then finally we prepared the as built drawings from the actual site measurement. These are all survey reports, data’s we have got from our site co-ordinates with the maxis peoples from time to time through by faxes, phones & emails.
In this project, I was engaged as a Civil, Structural & Instrumentation CAD Technician\Draughtsman for a Long term contract period, I have gained a good knowledge in preparation of tender drawings, as built drawings, standard drawings & shop drawings, got a good achievements in production of drawings & learn speed with shortcut keys in the AutoCAD 2000.

Educational Background :
Graduation Date : 1991
Diploma (3 years) of Engineering (Civil)
Major : CIVIL & STRUCTURAL
Institute/University : STATE BOARD OF TECHNICAL EDUCATION & TRAINING INSTITUTE, India
Grade : Grade B/2nd Class Upper

Skills :
(Proficiency : Advanced - Highly experienced; Intermediate - Familiar with all the basic functionalities; Beginner - Just started using or learning the skill)
Skill Years Proficiency :
3D MODELING & DRAFTING >5 Advanced
Designing, Drafting & Detailing IN CAD >5 Advanced
AUTO CAD >5 Advanced
STRUCTURAL ENGINEER 5 Advanced
PDMS 2 Intermediate
X-STEEL 1 Beginner

Languages :
(Proficiency : 0=Poor - 10=Excellent)
Language Spoken Written
English 10 10
Hindi 10 10
Tamil 10 10

Personal Particulars & Preferences :
Date of Birth : 8 March 1973
Nationality : India
Gender : Male
Possess Own Transport : Yes

Summary :
A wide experience in Engineering Drawings in Civil, Structural, Mechanical, Electrical, Piping, Instrumentation and Architectural drawings, Eight years of overseas working experience engaged as a CAD ENGINEER in Oil & Gas, Offshore and Telecommunication Sector.
Designing, Drafting & Detailing in CADD and checking experience that includes supervision, training, field surveying, estimating, conceptual layout, detailed piping design, pipe supports, 3D modeling, fabrication drawings, material take-off, and troubleshooting in the field for construction
Seriously looking for a challenging career to suit my qualification & experience. Willing to relocate worldwide for a long or short term contract or a Permanent Position.

List Of Experience :
Overall Sixteen Years of extensive work experience in Engineering Sector. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.
Engaged as a Draftsman (Structural, P & ID) for the COOGEE-Montara Venture Project (FPSO) with Tanker Pacific Offshore Terminals Pte Ltd at (JSPL) Jurong Shipyard, in Singapore.
Have Working Experience to Prepare Structural dwgs, Shop dwgs, and Fabrication dwgs for Offshore Self Elevating Drilling Unit, FPSO & FSO for the PETRONAS CARIGALI Project, as a Draftsman (Structural) with Apecs Offshore Pte Ltd (SWIBER HOLDINGS LIMITED) in Singapore.
Have working experience to prepare 3D model (structural dwgs) for TRAM, EISR Module & Helideck for Well Head Platform for the OMV- Clough Maari Project, Singapore.
Engaged as a Senior CAD Draftsman for the installation of steel plant. To do drafting for Civil Foundation design, Structural design, Equipment design for the Steel Mill plant in NATANZ STEEL INDUSTRIAL COPORATION, Iran with FEROSTEEL ENGINEERING SDN BHD, Malaysia.
Worked as a CAD Draughtsman with Glass Fibre Reinforced Concrete (M) Sdn Bhd for Architectural & Structural works in Selangor Darul Ehsan, Malaysia.
Engaged as a Civil & Structural CAD Draughtsman (used Auto CAD 2000, 2002LT version, 2004, & Intel CAD, version release 12, 14) with Vytel Asia (A division of Leighton Contractors (M) Sdn Bhd) for MAXIS BTS 225 OpticalFibre Telecommunication Project, in Kuala Lumpur, Malaysia.
Have Extensive experience in drafting as a Junior Draughtsman used ArchiCAD 3.3, in an Architectural firm, Madurai.
Over all Eight years of working experience in Power plants, Chemical Plants, Steel Plants, Cement Plants & high rise building construction sites engaged as Multidiscipline Role (See in Detail- s) with Larsen and Toubro Ltd, ECC Construction Group, India.
Extensive work experience in execution of High-Rise Building work.
Knowledge and working experience in construction of cement silo (slip form technique) in Larsen and Toubro Ltd, ECC Construction Group. India.
Listed below the working experience in preparation of bills, bar bending schedule, plans, drawings, layout and estimating quantities
At First I started my career as a Technical Apprentice in housing development board, Madurai, Tamil nadu. India

Education :
Diploma in Civil Engineering from State Board of Technical Education and Training, Madras.
(Course finished on 1991 April, at K.L.Nagaswamy Memorial Polytechnic, Madurai.)
Diploma in Computer Aided Designing and Draughting
Certificate course in STAAD Pro,
Certificate training course on Autodesk INVENTOR
Diploma in Office Automation (Ms Word, Ms Excel & PowerPoint presentation)

Technical skills set:
Operating System: Windows XP, Vista
Packages:
Expert - AutoCAD 2004, 2006, 2007, 2008, ArchiCAD 3.3, MS Word, Excel & Power Point
Intermediate - PDMS 11.6, Autodesk INVENTOR Release 2008, Micro Station, X-Steel

DETAIL- S OF EXPERIENCE:
Employer Name : Tanker Pacific Offshore Terminals Pvt Ltd
Role : Draftsman (P&ID, Structural)
Period : 24/07/2007 to 30/06/2008
Responsibilities : Prepare Structural Dwgs & P&ID Dwgs for FPSO Topside
Duties & Responsibility:
To do the modification of P& ID drawings, to prepare construction drawings for the conversion & demolition works in P&ID, Prepare structural Drawings for FPSO & prepare fabrication & shop dwgs for the flare boom, small bore pipe supports, Cable tray supports. To do the amendments & updates drawings for Cargo Oil & water ballast system, Aux. Sea Cool water, Sea water lift system, sewage treatment system, Bilge & Ballast system for the FPSO-tanker conversion, update the Isometric dwgs of piping layouts. To take measurements on board site & preparing As-Built dwgs for P&ID & Structural Modification in CAD, & To do 3d structural modification in PDMS. Perform actual design and drafting works (such as Boiler-Piping and Supports, Boiler Casing, Ductings and other heavy structure and machinery parts), Plan, schedule and control all activities of the group, Check all detail design drawings before submitting for approval Prepare tender documents and preliminary design

Employer Name : Apecs Offshore Pte Ltd, (Swiber Group) & Address Asia Pacific Engineering Consulting & Services
Role : Draftsman (Structural)
Period : 18/05/2006 to 10/07/2007
Responsibilities : Preparing Structural Dwgs , 3D Modeling,
Supervise and Train CAD personnel.
Duties & Responsibility:
Preparing 3D structural modeling for FPSO- SWIBER Conquest, Preparing 2D drawings, sketches, shop drawings, structural drawings & fabrication drawings for Self Elevating drilling Unit, Jack up Barge, accommodation barge, Preparing 2D & 3D drawings for installation sequence of Mid Water Arch, Making 3D modeling & perspective views for spud can designs, Making drawings of SPM (Single Point Mooring) for FPSO & Tug Boats as per Lead Project Engineer- s (Mooring) Instruction, Preparing & modification of 2d structural drawings for hull (SWIBER-Conquest) as per design engineers calculation & instruction.
Making 3D structural model for Helideck, TRAM & EISR Module for Well Head Platform for the OMV-Marri Clough Project, Preparing 2d structural dwgs for fabrication of TRAM (Temporary Refuge & Accommodation Module) & EISR (E & I Switch Room) as per instruction of the Design Consultant.

Employer Name : Fero Steel Engineering Sdn Bhd
Role : CAD Engineer (Team Leader)
Period : 24/10/2005 to 04/04/2006
Responsibilities : Prepared Civil, structural, Mechanical & Electrical Drawings copy from the original drawings & update the technical data- s, & To Reproduce the design for the site execution work.
Responsibilities & duties
To make the drawings from the civil foundations, So target the job & give up the schedule to the clients, feed back to the site engineers as well as the contractors for execution work, making transmittal drawings & attend the meetings with clients & contractors, Make weekly progress, etc., All the old drawings was made up of at 1973 in France & German language, So We update the Technical data- s in CAD, We Redesigned, analysis, & modify the design requirements for the execution, Produce Foundation layout, Sections for Ladle turret, tundish, Continuous Casting machine, CCM Foundation, CCM Buildings etc.,

Employer Name : Glass Fibre Reinforced Concrete (M) Sdn Bhd
Role : CAD Draughtsman
Period : 01/10/2003 to 4/09/2005
Responsibilities : Prepared Architectural Tender drawings, structural sketches
Responsibilities & duties :
To make detailed drawings from preliminary survey sketches & specification given by Architectural & structural lead design engineers, to do the Cost analysis for every project, to make work schedules, etc, Prepare standard drawings for civil & structural as per IS Standard specification code, making construction drawings & as built drawings. Prepare a detailed plans, section, elevations & workshop drawings for fabrication, make 3D modules used by CAD (2004, 2002 & 2000), etc,
Worked as a Cad Draughtsman with a team of six CAD technicians, & making decisions in execution of structural & architectural works, received a good incentives & increments for the quality output.

Employer Name : Vytel Asia
Project Title : maxis BTS 225
Client : maxis Telecommunication
Nature of work : CAD drawings, Sketches
Consulting Engineers : DE Perunding Sdn Bhd, Malaysia.
Role : CAD Draughtsman (Civil & Structural)
Period : 17/06/2002 to 20/08/2003(contract basis)
Responsibility : Preparing Structural, Construction & As built dwgs for Telecommunication base stn infrastructure within schedule period
Description of the Project :
Maxis are the one of the leading communication private limited in Malaysia. This project deals with the installation of the telecommunication base station infrastructure, We tie-up a team,(team size was built up by 3 lead design engineers, each lead engineer have 5 cad technicians) meet the deadlines to prepare the Structural drawings, construction drawings, site sketches, which we made drawings through by the pre-implementation survey report from our site-coordinates. Cabin cable ladder layouts, equipment & lightning layouts, earthing & power supply layouts, cabin internal & external elevations, minimast foundation & structural detail drawings, M-cell arena foundation detail drawings and general notes. Then finally we prepared the as built drawings from the actual site measurement. These are all survey reports, data- s we have got from our site co-ordinates with the maxis peoples from time to time through by faxes, phones & emails.
In this project, I was engaged as a Civil, Structural & Instrumentation CAD Technician\Draughtsman for a Long term contract period, I have gained a good knowledge in preparation of tender drawings, as built drawings, standard drawings & shop drawings, got a good achievements in production of drawings & learn speed with shortcut keys in the AutoCAD 2000.
Project Title : Meenakshi Mission Hospital and Research Centre
Location : lake area, melur road, Madurai - 625 017, Tamil nadu.

Employer Name : Hospitality Architects
Role : Junior Draughtsman
Period : From October 2000 to December 2001
Responsibility : Preparing Structural Dwgs & electrical layouts.
Employer Name : Larsen and Toubro Ltd, Ecc Construction Group
Mount Poonamalle Road, Manapakkam, Chennai - 600 089,
Tamil nadu, India.

I was worked a long period in this construction Group engaged as a Civil Engineer, Assistant Planning Engineer, and Site supervisor in different major project works detailed as given below :
Project Title : Tidel Park (Information Technology Park)
Location : # 7, C.P.T Road, Taramani, Chennai-600 113.
Employer : Larsen and Toubro Ltd, Ecc Construction Group
Consulting engineers 1 : TATA Consulting Engineers Limited
Consulting Engineers 2 : M/S Hyundai Co., South Korea.
Role : Civil Supervisor
Period : From October 1999 to April 2000

Project Title : Gujarat Cement Plant Phase -I
Location : Village: Kovaya, Taluka: Rajula, Dist: Amreli, Ahmedabad, Gujarat.
Client : Larsen and Toubro Ltd, (own plant)
Employer Name : Larsen and Toubro Ltd, Ecc Construction Group
Consulting engineers : Larsen and Toubro Ltd, (Group two)
Role : Civil Supervisor
Period : From 20th september1999 to 12th october1999

Project Title : Haldia Petro Chemical
Location : Village: Durgachak, Dist: Midnapore, Haldia, West Bengal.
Client : Haldia Petro Chemicals Ltd.,
Employer : Larsen and Toubro Ltd, Ecc Construction Group
Consulting engineers 1 : Engineers India Limited
Consulting engineers 2 : Daelim Engineering Corporation, South Korea.
Consulting engineers 3 : Toyo Engineering Limited, Japan
Role : Civil Engineer
Period : From 6th April 1998 to 5th August 1999

Project Title : Sponge Iron Plant
Client : Nippon Denro Ispat Ltd
Employer : Larsen and Toubro Ltd, Ecc Construction Group
Consulting engineers : Symsons Consulting Engineers, Russia.
Role : Assistant planning Engineer (Contract Basis)
Period : From 16th June 1995 to 15th December 1996.

Project Title : Thermal Power plant And Cooling Tower (250 X 2 MHz)
Client : Calcutta Electric Supply Corporation
Employer : Larsen and Toubro Ltd, Ecc Construction Group
Consulting engineers : Engineers India Limited,
Role : Technical Assistant (Nominal Muster Role)
Period : From 28th November 1994 to 29th April 1995

[Guest]

Mr.Pravin Kane
Email id : kane_pravin AT yahoo.co.in

Objective :
Seeking middle level assignments Autocad drafting a growth oriented organization.

Professional Synopsis :
Total Experience 12 years
- Well versed with knowledge of Mechanical.
- Knowledge of Autocad 14, Autocad 2008 & Microstation

Organization Experience :
July 2009 to 2013 Siemens Ltd. Airoli, Navi Mumbai
As a Cad Designer
Key Deliverable s :
- Draw accurate Isometric’s from Autocad & Microstation (Bently) 2005
- Working on Autocad Converting Into Isometric & Desiging
- Working on All Railway projects for Route Relay Interlock (RRI)

Highlights :-
- Worked in 'Siemens Ltd' for RRI Project Drawings, Relay rack
- erectiondruwings with Auto cad 2005 & Micro station 2005, for 3 years.
- Worked in Isp at Ind. Ltd. For Project for 2 years.
Meqa Meditex Ltd . For Macmar (Maleshiya ) Project. For 3 years
Reliance ind. Ltd. For project PSF & PFY plant. For 3 years

Worked on Project :
To Design the Electric Layout of Mechi. Isometric & Layout under project.
July 2009 - present 2012 SIEMENS LTD. Airoli, Navi Mumbai
As Draughtsman
Preparing all concerned Electrical drawing which in clued Panvel wiring diagram Indication & operating Panvel, Route plan for all Railway signaling accessories
May 2007 - June 2009 Aurovision Pvt. Ltd. Worli Mumbai
As cad executive
April 2002 - May 2007 Dalal Joshi & Associates. Fort Mumbai
As cad executive (civil)
Jan 2001 - Feb 2002 Ispat ind. Ltd. Wadkhal (Pen)
As Draughtsman
Aug 1997 - Dec 2000 Siemens Ltd. Worli Mumbai

As - Draughtsman
Key Deliverable s :
Preparing all concerned Electrical drawing which in clued Panvel wiring diagram Indication & operating Panvel, Route plan for all Railway signaling accessories
Nov 1993 - April 1996 Meqa Meditex Ltd. Tabja

As Draughtsman
Key Deliverable s :
Draw accurate Isometric Drawings of mach mar (Maleshiya ) Project.
May 1988 - Aug 1990 Reliance ind. Ltd. Patalgaga(Rasayani)
Pst & PFY plants Drawings Tracing equipments layouts, with ISO. Standards.

Qualifications :
Passed autocad R-14 & 2000 in year 2003 Livicon Computer Training,panvel.
Passed mech.d’man with 2nd class in thakercy ITI, matunga, year 1987.
Passed H.S.C.Examination from Mumbai board
Passed S.S.C.Examination from Mumbai board

Personal Details :
1) Date of Birth : 28th December 1966.
2) Age & Sex : 47, Male.
3) Nationality : Indian
4) Hobbies & interest : To Listing Music,playing badminton,cricket
5) Language Known : English,Hindi & Marathi.

Date :- 014.02.2013