www.bhelisg.com Careers 2011 Bharat Heavy Electricals Limited : Experienced Engineering Executive

[muthukalee]

Name of the organisation : BHEL Bharat Heavy Electricals Limited ( bhelisg.com )
Name of the post : Careers for Experienced Engineering Executive in 2011

RECRUITMENT OF EXPERIENCED ENGINEERING EXECUTIVES ON FIXED TENURE BASIS FOR VARIOUS PROJECT SITES OF INDUSTRIAL SYSTEMS GROUP, BANGALORE

BHEL, India’s Premier Navaratna Engineering Organization provides world class products and services for the core sectors of Indian economy viz., Power Generation & Transmission, Industry, Transportation, Oil and Gas, Renewable Energy, Defence etc. It has a wide network of 15 Manufacturing Divisions, 4 Power Sector Regional Centres, 8 Service Centres, 15 Regional Offices and a large number of project sites spread across all over India and abroad .

Number of Vacancies : 20
Civil - 10
Mechanical - 5
Electrical or Electronics - 5

Upper Age Limit : 33 years as on 01.10.2011 with minimum 1 year post qualification relevant work experience.

Educational Qualification :
Bachelors Degree in Engineering/ Technology in CIVIL from a recognized University / Institute with minimum 60% marks in aggregate of all the years / semesters for Gen/OBC/and 50% marks in aggregate for SC/ST candidates
Bachelors degree in Engineering / Technology in MECHANICAL or equivalent disciplines(#) from a recognized University / Institute with minimum 60% marks in aggregate of all the years / semesters for Gen/OBC/and 50% marks in aggregate for SC/ST candidates
Bachelors degree in Engineering/Technology in ELECTRICAL / ELECTRONICS or equivalent disciplines(#)from a recognized University / Institute with minimum 60% marks in aggregate of all the years / semesters for Gen/OBC/and 50% marks in aggregate for SC/ST candidates

How to Apply :
1. The submission of application will be online only through our website www.bhelisg.com or http://careers.bhel.in
2. A non-refundable Bank Demand Draft for Rs.200/- (Rupees two hundred only) drawn in favour of BHEL, ISG payable at Bangalore is to be enclosed. Candidates are advised to write their name and position on the reverse side of the Demand Draft. However, SC/ST and Physically Challenged candidates are exempted from paying the processing fee. Candidates are advised to keep the Demand Draft ready before filling the online application, since details like DD Number, Drawee Bank and Branch are to be furnished in the application.
3. Our recruitment website www.bhelisg.com. & http://careers.bhel.in will provide necessary details regarding how to apply, general instructions, last date of submission of applications, requisite Formats to be downloaded, etc.
4. Duly filled-in and signed application form downloaded from our website www.bhelisg.com or http://careers.bhel.in with requisite documents enclosed including Demand Draft and a photograph pasted are to be sent to The Addl.General Manager (HR), BHEL/Industrial Systems Group, Prof. CNR Rao Circle, IISc (PO), PB No.1249, Malleswaram, Bangalore – 560 012 so as to reach latest by 12.11.2011 and from far flung areas by 19.11.2011.BHEL is not responsible for any postal loss/ postal delay in receipt of applications.
5. Post & Function applied for should be superscribed on the envelope carrying the above documents

IMPORTANT DATES :
Commencement of Online Submission of Applications 14.10.2011
Closing of Online Submission of Applications 05.11.2011
Last date for receipt of filled-in and signed application form at BHEL, ISG, Bangalore 12.11.2011
Last date for receipt of filled-in and signed application form at BHEL, ISG, Bangalore from far flung areas 19.11.2011

More Details : http://www.bhelisg.com/job_openings.html

***************
General Instructions :
This is information on BHEL Bharat Heavy Electricals Limited Recruitment 2011 / Vacancies / Careers / to be filled, for the post of Experienced Engineering Executive.
If you are looking for jobs / career in BHEL Bharat Heavy Electricals Limited, you have to apply by downloading the application form given in the link above.
Full details of recruitment in BHEL Bharat Heavy Electricals Limited can be had from the detailed advertisement link as given above.
You can also visit the careers page of BHEL Bharat Heavy Electricals Limited to know more about the selection procedure, latest results, other jobs vacancy requirements etc.
Please ensure that you apply before the last date as all government recruitment procedures adhere a strict policy on this.
***************

[Guest-IJT]

Name : sohan lal shrama
Email : sohan.sukhwal AT gmail.com
Designation / Skillset : assitt.engr,electrical

Resume :

Objective :
To work at a challenging position in a professional organization.Seeking a challenging environment that encourages continuous learning, increased responsibilities with time, and hence stimulates professional & personal growth.
Professional profile :
An Electrical Engineering professional with sound technical and functional understanding of textile industry Engineering department Utility ,spinning and weaving machines, well versed with all the technical and feasibility aspects of textile equipments.
Educational Qualification :
Qualification Year Board/University % Division
Secondary* With
Maths ‘D’ 2004 Board of Sec.Edu.Raj.Ajmer 64.17 First
Polytechnic Diploma** In (Electrical Engineering) 2007 Board of Tech.Edu.Jodhpur Raj. 69.72 First
*Secondary from Govt.Sec. Sec.School Sadas, Chittor-Garh (Raj.)
**Diploma from Govt. Polytechnic College Pali (Raj)
Industrial experience :
* From May-2008– Present : B S L LTD.BHILWARA, Rajasthan as an Assistant Engineer

Technical JOB Responsibilities :
* Looking after Electrical maintenance of 26000 spindles of wool and PV.
* Looking after electrical substation maintenance(HT&LT Panels and line)m/C’s brake down of spinning division.
NATURE OF WORK :
To attend the break down & maintance of Air compressors, Water pumps, Cooling Towers, Humidification plant, D.G sets, Boiler, Spinning Machine, weaving looms and other textile industry equipments & maintance & change over work of LT panels.
Special Achievement :
Timely Erect The VORTEX Spg. Likely BLOW ROOM & CARDING LC 300 & LC 303, DRAW FRAME LD2 & LAXMI REATER, MURATEC VORTEX M/C’S With together to M/C’s Service Engineer on Electrical Side.

Declaration :
I,The undersigned, here by state that all the information state above is true to the best of my knowledge.
Date :…………………….
Place :…………………….
(Sohan Lal Sharma)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4386430
Date & Time : 19th Jul 2011 3:26 AM (UTC)
IP Address : 59.90.74.70
Browser Info : Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1)
Predicted Country []: India

[Guest]

CURRICULUM VITA
Mohamed Ashraf.KT
mohamedashrafkt AT gmail.com
Objectives
To prove my full potential skills and to grow with the organization to work sincerely wherever I work unto your fullest satisfaction and all my capabilities must continuously be acquired, sharpened and used for the organization purpose.
Educational qualification : S.S.L.C with 71% in 2002-2003(Board of Public
Examinations, Kerala State
: HSE with 65% marks in 2005 (State Council of
Educational Research and Training (SCERT)
Kerala
Professional qualification : B-Tech Electrical & Electronics Engineering
with first class.
Computer Proficiency
Project Software : Ms Project, MS Office
OS Platform : Windows 98, XP/Vista Windows 7
Programming Languages : C, MATLAB
Auto Cad : Auto Cad 2011
CARRIER FOCUS
Looking for challenging and competitive position with a well organized institution having ample scope for career development as a
Electrical Engineer
Personal Skills
Comprehensive problem solving abilities, excellent verbal and written communication skills, ability to deal with people diplomatically, willingness to learn team facilitator hard worker
Group project
Distribution Automation in 11KV feeder at Trivandrum city. Completed at Power house Trivandrum
PROFESSIONAL EXPERIENCE
Tenure : From September 2010 onwards
Company : M/S Powertech Trading and Electrical Cont L.L.C
Designation : Electrical Engineer
JOB DESCRIPTION

- Estimating and costing, monitoring the project and Supervising the HT and MV installation and electrification of industries &multi storied buildings.
- Co-ordinate engineering departments on all aspects during the development of works and confirming the design with requirements
- Supervise, monitor and direct as applicable the activities of subordinates and sub-contractors, issuing proper technical specification to technicians.
PROJECT HANDLING
- Complete electrification work for NOORA Lime company
New 6.6 KV Substations in R.A.K,UAE.
- J-10 New Distribution System for gulf pharmaceutical industries RAK,UAE.
- Complete MEP Quantity Estimation & Preparing the BOQ for AEGEAN OIL TERMINAL CORPORATION New tank farm in Fujairah UAE.
- Co ordination of Electrical & Instrumentation work in Star cement factory RAK UAE.
- 33 KV Cable Testing in FEWA Substations.
- Working as an Electrical Engineer in the AEGEAN OIL TERMINAL CORPORATION New tank farm in Fujairah UAE

[Guest]

Resume for the post of Manager QC & Projects
Name : D. Swaminathan
Qualification : Chartered Mechanical Engineer through Institution of Engineers
(India) Calcutta
Master of Business Administration (MBA)
IRCA – Lead auditor ISO 9000-2008 QMS

NDT Qualification Level II in RT/UT/MPT/PT/VT/ Special Training obtained
For Mass Spectrometer Helium leak deduction system of
both positive/vacuum methods for Exchangers, vessels and
other critical pressure equipments/pipelines/valves.
Professional Membership Member Institution of Engineers (India)
Member Indian Institute of Welding (India)

Contact detail Emil : dswami54 AT gmail.com

SKILLS AND EXPERTISE ( More than 25 years in various type of industries)
- Vendor source inspection and Expediting of all equipments like Column, Pressure Vessels, Heat Exchanger,
Air cooled Exchangers , Fired Heaters , HRSG and Package Boilers which includes Raw material checks up
to final inspection. Periodic visits carried out for expediting of all high value core equipments and report to
all Department managers such as Project, Purchase, Site managers, QC managers.
, Calibration checks of Instrumentation Items like Pressure, Temperature , Level, Orifice Meters
with Flow Transmitter with Hart Protocol, (4-20 MA outputs) , Sound knowledge in Explosion Proof
Enclosures and type certifications.
Inspection of Rotating equipments like Centrifugal Pumps, Compressor, turbines, Fans, Motors with
relevant Performance test code and API standards which includes review ITP, Witness of all critical
points, such as Material checks, Hydro test, Balancing of rotors, spin tests, Performance test as per American
std PTC test codes/ Project specification..

Inspection of all type manual operated valves like Gate, globe, Check, Ball as per API standards.
Complete FAT of Control Valves as per standard & project spec. Witnessing all Pre qualification
Regular Inspection of GRE/GRP- RTR Piping / Pipe fittings as per ISO 14692 for sea water desalination
and chlorination plants, capable of carrying out vendor survey “Expediting” of all Project orders to ensure
timely receipt of the materials.

Complete QA/QC activities Construction site of Oil and Gas, Power Plant both Gas & Steam Turbines,
Boiler, Gas turbine erection, Desalination plants. Capable of working with multiple discipline like Civil,
Mechanical, Instrumentation . Familiar with erection of static, rotating equipments and alignments, Field
Erection of Storage Tanks according to API 650 & API 620 ( Down Stream Segment Tank) Refrigeration
and low temperature liquid Hydro carbon Tanks, Piping Fabrication and Installation as per Isometric & P&ID
of CS/SS/Non-ferrous pipe Control of PWHT, NDT, Installation of FRP/GRP/GRV/GRE/ RTR piping
fabrication for Electro-Chlorination plant, preparation Test packages, Hydro test, re-instatement, Preparation
of punch-list & closing hand over to commissioning.
Welding knowledge of Ni base Alloys, Exotic material of Titanium, Tantalum and Zirconium. and familiar
with SMAW TIG/GMAW/SAW/FCAW/ Fusion welding technique (without filler wire), and cladding methods of various material combinations .Preparation of WPS/PQR and other related welding inspection documents .
Knowledge in Design of Pressure Vessel, Shell and Tube Exchangers, Air fin Coolers as per ASME Section VIII Division 1. Review of design documents from Code ware, PV Elite, HTRI, and Thermal design. Review Vessel calculations with ASME/PD 5500/Project/other code Specifications and comments / approve both calculations and Drawings.
Capable of review TBE vendor recommendation of all Rotating Equipments such as Centrifugal pumps, Steam turbine, Compressors, Fans according to the International standards such as API and also Project requirement and preparation of comparison statement and recommendations.
Carried out Maintenance Inspection/Shut Down Inspection of Refinery, Power plant, Petro chemicals according To API 510, & 570 and complete Inspection of vessels, Heat exchangers, Column, Air cooled exchangers and and provide recommendation.
Experience Details
A) Name of the company : Abudhabi Gas Company ( GASCO) Habshan Project.
Position Held : Inspection Engineer
Nature of Job : Employed as Client Inspection Engineer for Flue Gas extraction Project inspection
of Additional piping of Large Dia 56” – Tie in with existing system , coordination
with EPC contractors of CCC Abudhabi and Hyundai/Punj Lloyd. In service
examination of Vessels,Heat exchangers as per API 510. Integrity check of HRSG
Package Boilers – Repair of tubes, Hydro test & safety valve Certification.

Period of Employment : Feb and March 2011 – 2 months

B) Name of the company : Saudi Kayan Petro chemical Company Al Jubail, Saudi Arabia
( A unit of SABIC group of company)
Position Held : Inspection Engineer Rotating Equipment. PMT Department.
Nature of Job : Complete QC activities of Rotating equipments such as Gas Compressor, Centrifugal
Pumps, Turbines and related accessories, Fans for Boilers, Fan for Air cooled Heat
Exchangers, which includes Civil foundation clearance, Installation of equipments,
Alignment, Grouting clearance, solo run test, coupling alignment, sample feed
Trial run, Hot alignment, etc. Controlling all rotating equipment erection of Olefin
Polypropylene, HDPE, EO&EG, Phenolics, plants and coordinating with leading
EPC Construction group such as KBR, Samsung, CTCI, Delim, and Flour. All
Activities performed according to API 686. In addition to, FAT witnessing of all
Rotating equipments at vendor shop and ensure design requirements and approvals.

Period of employment : June 2009 to August 2010.
C) Name of the company : Consolidated Contractors International LLC Abudhabi.( One of the EPC
contractors in Gulf region)
Position Held : Senior Inspection Engineer ( Vendor )
EPC Project Handled : a) Al Khafji FDP Joint operation ( A joint venture project of Saudi
Aramco and Kuwait Oil Company.
b) Khafji Crude oil Project – Client Saudi Armaco
c) Qatar Petroleum Ras laffan Water cooling project Phase 1&2
Nature of job : Vendor source inspection control(International) such as “ Chair person of Pre
Inspection meeting, approval of all procedures, welding book such as WPS/PQR/
Weld maps. ITP approvals and Expediting of high value equipments. Witnessing
Of all critical inspection points and provide final clearance for dispatch to site.
Deputed Six months at South Korea to carryout inspection and expediting activities
Controlling around 16 high value equipment suppliers.

Some details of the equipment and vendor Ref where inspection was carried out.
1. S&T Corporation Changwon- Air cooled Heat exchanger of 144 bundle Assembly of CS/SS
A203E Materials and tubes with Fan, Motors, Structures .
2. Daebong Acrotec Ltd Ulsan - 54 Pressure vessel of CS/A203E.
3. Hyundai Industrial Machinery Gyuon;ju Pohang : Pipe Rack Structural , Equipment Platforms
Total tonnage Fabrication appro 2500 T/Month
4) 3Z corporation Lubricated Plug valves from 2”to 24”of both CS&SS
5) Samwoo KJS Ltd (changwon) Gate/Globe/Check valves of CS/LCS/SS – 2”24” -750 Nos

6) Hyundai RB Hysco API 5L SAW pipe from 24”to 44”size -18.000 M
7) Hyundai Valves Ltd Gimhe Gate/Globe/Check from ½”to 24” size -875 nos

8) John Pickle Middle East Kuwait – Inspection of Pressure vessel of high wall thickness (110 mm)
( Division of Kuwait pipes and 9 No and 3 No of 35 Meter column with 70 Tray support
Oil company. Safat.Kuwait) made out of A 203E & Low Alloy Steels

9) FBM-KNM Jebel Ali (Dubai) - Heat exchanger with floating head design and Kettle type
design with A 203E/SS316 material – 14 No.
10) Virgo Valves & Controls Ltd – Both soft seated and metal seated ball valves range from
(Pune) 0.75 to 20” size of floating /trunion mounted. Qty- 830.
Valve with Pneumatic Actuators / 24V DC supply with solenoid
with P/I converters .Total qty – 184 from 1” size to 16”.
11) Saudi Pumps Ltd (Riyad) -Centrifugal pumps for water and critical services qty – 36 nos
Carried out from Raw materials checks to shop trail run test.

Period of employment : 1-8-2007 to 31-4-2009
D) Name of the Company : Consolidated Contractors International LLC OMAN ( One of the EPC contractors
in Gulf Region.

Position Held : Inspection Engineer
EPC project Handled : Oman Refinery Company Muscat a Unit of PDO
Nature of Job : Vendor source inspection control and expediting of high value equipments such as
Storage tanks, Pressure vessels, Heat Exchangers, Air cooled Exchangers, Pumps
Valves and controlling around 32 vendors in India, Gulf Region, Italy, Japan etc.
Some details of the equipment and vendor Ref as below where inspection was carried out :
* NPCC–Abudhabi –Total 5 columns (U stamped ) Low Alloy with PWHT 60 row internal
tray supports
* FBM HUDSON (Jebel Ali Dubai) : Total 6 Heat exchangers (U stamped)
* MIS Sharjah - 9 critical pressure vessel with HIC+Clad+PWHT requirements (U stamped)
* Born Canada (GMMOS- Dubai) – Fired Heater package with coil, stack, transition-5 units
* ISGEC India - Low alloy high pressure reactors & Heat Exchangers.
* Vijay Tank – Sharjah - Fabrication of Four big storage tanks of 25 x 30 H.
* Godrej & Boyce : Total 27 heat exchangers of various material like SS316,LAS (U Stamped)
* GEI-Hamman &Pahrapur Cooling Towers - Fin Fan Coolers – Total 26 module (U stamped)
* Fisher/Control – Control valves more than 250 installations range from 1”to 12” size.
* Various Valve Manufacturers : Inspection carried out from ½” to 24” valves Qty ( 3000 nos)
* Sulzer Pumps : Performance testing of Centrifugal pumps
Period of employment : 1-9-2005 to 31-6-2007
E) Name of the company : Lahoud Engineering Company LLC Dubai
Position Held : QA/QC Head
Project Detail ; a) Erection of combined cycle power plant of 2 x 130 MW Gas turbine +
Erection of HRSG Boiler + Steam turbine + Transformers at Jabil Ali Dubai.
Project by GE/Alstom/Mott Macdonald
b) Erection of 1 x 130 MW power plant Boiler + Steam turbine + transformer and
Desalination Plant at Dubai Electricity and Water Authority Jebel Ali. Dubai
Project by Hyundai Heavy Engineering/ Areva
Nature of Job : Civil foundation clearance, equipment erection , grouting clearance, Piping
Fabrication both at yard/site erection , NDT, check with P&ID, Hydro test
Re-instatement, Punch list preparation. Punch list closing. Pump erection, Pump
alignments , installation of all instrumentation panels, Coordination with client
inspection authority and carried out all pre commissioning and post
commissioning activities.
Period of employment : 2-1-2004 to 31-5-2005
F) Name of the Company : Saudi Aramco Riyad Refinery Saudi Arabia
Position Held : Plant Inspection Engineer
Nature of Job : QA /QC of erection of Equipments and piping , pumps, for capacity expansion
And modification project.
Period of Employment : 1-9-2003 to 20-12-2003.
G) Name of the Company : Kevenar Power Gas Limited Mumbai ( EPC consultant for Petro Chemical)
Position Held : TPI Inspection Engineer for Southern Region
Nature of Job : Vendor source inspection at southern region four states controlling around 32
vendors
Period of Employment : 1-12-2002 to 31-7-2003
30-12-1998 to 31-7-1999.
H) Name of the company : Titannium Tantalum Products Limited ( Manufacturing unit of pressure vessel
Heat exchangers, Pumps, cathodic protection made out of exotic materials such
As Titanium, Tantalum, Zirconium, Ni base alloys)
Position Held : QA/QC Manager and MR of ISO QMS
Nature of Job : All day to day QA/QC activities and complete control of ISO activities such as
Chair person of Management Review meeting,
Plan and scheduling internal audits
Customer Complaint preventive action and improvement
Period of Employment : 1-8-2000 to 15-11-2002
F) Name of the Company : Reliance Petroleum Ltd (Jam Nagar)
Employed through Alphine Inspection Services Chennai

Position Held : Inspection Engineer (Vendor & Construction)
Period of Employment : 1-10-1999 to 30-6-2000
I) Name of the Company ; Switzer Instruments Limited ( Manufacturer of Instrumentation Items such as
Pressure switch, temp switch, flow, level switches for all process plants, Power
Plants)
Position Held : Senior Manager Plant operation
Period of Employment : 1-8-1994 to 26-12-1998
J) Name of the Company : Tuflin India Limited & Fisher control Ltd ( Units of Sanmar Engineering
Corporation)
1) Employed as Quality Engineer (Vendor ), Co ordinate with vendor for
Development of valve body, bonnet , plug , All Inspection carried out
For initial production and clearance for bulk production. Carried out
Regular visits and follow up of all orders and timely receipt of material. All Inspection are carried out at vendor premises. Development of valve parts carried out through Sand mould castings, Investment process and forgings.

Position Held : Executive Manager
Period of employment : 16-6-1882 to 1-8-1994
Capabilities:
- Carrying out company Audits according to ISO QMS of Core equipment manufacturing plants such as Pressure vessels, Heat exchangers, Boilers, Pumps, Compressors, Turbine, Fired Heaters.
- All types of Material standard specification as per ASME section IIA,IIB and consumables IIC (AWS SFA 5.1-5.30) and Preparation Review of WPS/PQR/WPQ documents as per
Section IX and Familiar with AWS D.1.1 Structural welding code and API/ANSI standards.
- Familiar with all Welding Methods like SMAW, SAW, TIG, FCAW, GMAW and review relevant WPS/PQR welding documents for different materials combination and dissimilar
- Materials, Witness and Approval of New WPS/PQR as per relevant standard.
- Knowledge in ASME Section VIII Div I and PD 5500, all inspection stages of approvals of pressure vessel, Column and heat exchangers as per TEMA/API 660. Sound knowledge in Inspection and approval of Low alloy steel , Hydrogen service and also H2S service vessels as per project documents.
- Witnessing performance of Centrifugal Pumps/ Vertical Pumps , Review Assembly with
Motor/Mechanical Seals/Gland Packing, and subsequent Leak testing after final assembly,
Flow and Efficiency calculation and draw performance curve as per API-610. In addition
to pump erection/coupling alignment as per specification.
- Sound knowledge in inspection of all types of Valves /Control Valves/ Safety Relief Valves
Emergency Shut Down Valves with Control Instrumentation as per API. 598/600..609 6D, Familiar with ANSI B16.5/B16.10 dimensional standard, Leak standard ANSI/FCI-70.2 . Valve construction for Sour service (MR-01-75) Hydro test/ Seat leak test/both in Ambient
And Sub-Zero Temperature test. Verification of design document of control valves, performance with all Instruments, Safety relief valve ‘POP” test witness and certification as per code.

- Knowledge in NACE standards of MR-0175, MR-0284 (HIC) and inspection methods approvals.

- Knowledge in Exotic material fabrication technique of Titanium/Tantalum/Zirconium/Duplex
stainless steel, Ni base alloys Copper and Aluminum.
- Knowledge in piping fabrication both yard/site/ erection/support fabrication as per ASME B31.3

- Knowledge in Painting inspection grit blasting standard , inspection of roughness coating material
checks/ DFT examination of different stages and approvals.
- Sound knowledge in carryout/witness of high sensitive Helium Leak Testing of pressure
vessels, Heat Exchangers (Tube sheet to Tube joints) ,and high pressure pipelines joints to
ensure Zero point leaking in PPM level.

[Guest]

RESUME
Srinivasulu
Email : vshsrinu AT gmail.com

CAREER OBJECTIVE
To achieve a challenging position in Software Development with state-of-the-art Technology where my analytical, problem in solving and application orientation skills can be put in for the successful completion of any given project and work sincerely to keep up the reputation of the organization.
CAREER SUMMARY
- Ability to learn new technologies in quick time.
- Ability to work in team towards team goals.
ACADAMIC PROFILE
Year degree/ institution Aggregate %
2007 – 2011 B.TECH (Electrical& Electronics Engg ) 67.61
J.N.T University, Anantapur

2005 – 2007 Board of Intermediate Education 69.10
2004 – 2005 SSC [10th Class] 66.75
COMPUTER SKILLS
Group Software Tools/Technologies
Programming Languages : C,WindowsXP/2007
.
¬PROJECT WORK- Graduation
Title : zero voltage electronic loads based on a z-source converter and energy recycling
Project Description :
The project proposes two high-efficiency energy recycling zero-voltage electronic loads (E Ls) based on a Z-source converter.
The proposed circuits can operate as an ideal current source, which enables the operation of the zero-input voltage.
By utilizing the energy recycling methods, the test is realized with no waste of energy