-
October 13th, 2011, 03:12 PM
Post Count Number #1
www.gicofindia.com Recruitment 2011 General Insurance Corporation Of India : Specialist Officer
Name of the organisation : General Insurance Corporation Of India ( gicofindia.com )
Name of the post : Recruitment for Specialist Officer in 2011
GENERAL INSURANCE CORPORATION OF INDIA
(A wholly owned Government of India Company)
RECRUITMENT OF SPECIALIST OFFICERS
GIC Re, the 'Indian Reinsurer' and 14th largest Reinsurance Company in the world fully owned by Government of India with the network in India and abroad is looking for Young, Energetic Graduates / Post Graduates with Brilliant Academic record in the disciplines mentioned below to fill-in the positions of 50 Specialist Officers in the cadre of Assistant Managers (Scale-I) to be based in its offices in India and abroad and will be liable to be posted anywhere in India as well as abroad as per the requirement of the Corporation.
The details of vacancies are as follows :
INSURANCE GLI 10
MARINE ENGINEERING MRE 2
AERONAUTICAL ENGINEERING AVE 2
CHEMICAL ENGINEERING CME 2
MECHANICAL/ ELECTRICAL ENGINEERING MEE 2
RESEARCH & DEVELOPMENT RSD 2
MEDICAL MED 1
MARKETING MRT 2
ENTERPRISE RISK MANAGEMENT ERM 2
INFORMATION TECHNOLOGY (Software) ITS 3
INFORMATION TECHNOLOGY (Hardware)ITH 2
FINANCE / ACCOUNTS FAC 11
HUMAN RESOURCE DEVELOPMENT HRD 3
LEGAL LGL 3
CIVIL ENGINEERING CVE 2
PUBLICITY PBL 1
Total : 50
Age Criteria : Age (As on 30.09.2011)
Minimum age : 21 years.
Maximum age : 30 years
How to apply :
Candidates satisfying the eligibility conditions have to apply through online registration system of GIC Re i.e. www.epostonline.in/GIC
Online submission of the applications will be allowed on the website between 15TH OCTOBER’2011 to 5TH NOVEMBER 2011. No other means/mode of application shall be accepted.
Non refundable Crossed demand draft of Rs. 500/- as Processing and Examination fees. (Rupees Five Hundred Only) by means of an A/c Payee Demand Draft in favour of “GENERAL INSURANCE CORPORATION OF INDIA”, payable at Mumbai, which is not refundable. (Candidates belonging to SC/ST category and PH (OH) candidates and the employees of GIC and GIPSA Member Companies are exempted from the fees).
Please send your Registration Slips with DD and other supportive documents by ORDINARY POST / SPEED POST so as to reach latest by 14th NOVEMBER’2011 to The Advertiser-GIC Re, Post Bag No 99, G P O KOLKATA, KOLKATA-700001, super scribing the Envelope as “APPLICATION FOR THE POST OF ASSISTANT MANAGER ( SPECIALIST ) IN GIC Re”. (Please indicate the Stream /Discipline for which you have applied also)
Enclose attested copies of the :
(i) HSC Certificate showing Date of Birth,
(ii) Degree / PG Certificates and Mark Sheets,
(iii) Certificate regarding prescribed professional training,
(iv) Caste Certificate
(v) Disability Certificate wherever applicable
(vi) Ex-Servicemen Release Order wherever applicable
(vii) Evidence of Domicile for the period from 1.1.1980 to 15.8.1985 in the case of Assam State Residents (for age relaxation purpose).
IMPORTANT DATES ( Tentative ) :
Commencement of online registration of applications by candidates 15th October’2011
Last date for Online Registration 5th November’2011
Last date for accepting registration slips with required documents by post 14th November’2011
Intimation to candidates regarding Downloading of admit cards by sms/email latest by 25th November’2011
Tentative Date of Written Test 4th December’2011
Tentative Date for commencement of Group Discussion / Interview Last week of December 2011
Tentative Date for joining the Corporation on induction training programme First week of February 2012
More Details : http://gicofindia.com/Downloads/GIC_Re-Recruitment.pdf
***************
General Instructions :
This is information on General Insurance Corporation Of India Recruitment 2011 / Vacancies / Careers / to be filled, for the post of Specialist Officer.
If you are looking for jobs / career in General Insurance Corporation Of India , you have to apply by downloading the application form given in the link above.
Full details of recruitment in General Insurance Corporation Of India can be had from the detailed advertisement link as given above.
You can also visit the careers page of General Insurance Corporation Of India to know more about the selection procedure, latest results, other jobs vacancy requirements etc.
Please ensure that you apply before the last date as all government recruitment procedures adhere a strict policy on this.
***************
-
October 14th, 2011, 10:01 AM
Post Count Number #2
IJT addict
Name : krishna kumar
Email : vikadakavi89 AT gmail.com
Designation / Skillset : AERONAUTICAL ENGINEERING, DIPLOMA IN MECHANICAL ENGINEERING
Seeking a job in design engineering
Resume :
OBJECTIVE :
To secure a challenging position in an organization where I can effectively contribute my skills for the organization’s growth and to perform the best in the task assigned.
EDUCATIONAL QUALIFICATION :
Bachelor of Engineering
(Aeronautics) 2011 Noorul Islam College of Engineering, Thuckalay
(Anna University, Tirunelveli) 68%
Diploma 2008 V.S.V.N. Polytechnic College, Virudhunagar. 92.7%
X 2005 K.V.S. Higher Secondary school, Virudhunagar.
73.8%
COMPUTER SKILLS :
- Auto CAD,
- Fortran
- Microsoft Office : MS Word, MS PowerPoint.
- Operating System : Linux, Windows 98, XP.
IMPLANT TRAINING :
SL.NO. NAME OF THE INDUSTRY TRAINING DAYS NATURE OF TRAINING
1 Sankar Automobiles Pvt. Ltd., (Specialist in Tractor) Virudhunagar. 21 days Die Casting,
CNC Training
2 Meraind Die Casting Pvt. Ltd, Chennai 10 days Die Casting,
CNC Training
3 Balaji Die Casting Pvt. Ltd, Chennai. 30 days CNC, HMC, VMC, TRSM Center Training.
PROJECTS UNDERTAKEN :
HIGH SPEED HEAT TRANSFER ESTIMATION IN WING PROFILE :
The aim of this project is to estimate the heat flux in any given wing geometry profile by using the FORTRAN language in CFD. This program is aimed to calculate the heat flux of the flight type that can fly in any particular altitude and Mach number; and also the transient aerodynamic heating and the surface temperatures at supersonic speeds. Firstly, the wing-geometry is specified as a series of sections consisting of a rounded leading edge, followed by conical and flat portions. At specified points on this wing-profile, the heat transfer rate is estimated, using engineering approximations. During the ascent flight, the altitude and Mach number change continuously and the basic free stream properties like pressure, temperature, density as well as enthalpy also changes which lead to a time varying heat flux. These above properties are calculated by means of interpolation technique. These comparisons show that the values predicted using in the program are in good agreement with measured surface temperatures and measure heat transfer coefficients.
GUIDED BY :
Dr. R.BALU M.S., Ph.D.
(Former Head of Aerodynamic and Research Division,
Vikram Sarabhai Space Centre (VSSC), Trivandrum),
Professor, Noorul Islam College of Engineering, Kumaracoil, Kanyakumari Dist.
ACADEMIC ACHIEVEMENTS :
Presented a Research Paper on “Aerospace Materials and Structures” at National level Technical Symposium held by Infant Jesus College of Engineering, Keelavallanadu in association with Anna University, Tirunelveli on 21st March 2009.
- Detailed study about the materials used in Aerospace applications..
- Suggestion for efficient usage on materials in Aerospace.
Participated in Annual Tech and Astro Fest ‘Workshop on RC Aircraft’ conducted by Indian Institute of Space Science and Technology (ISRO) held at Valiamala on 4-6th March 2011.
- Detailed study about the basic concepts of Aircraft Design.
- Calculation for designing the aircraft parts.
EXTRA –CURRICULAR ACTIVITIES
- Worked as an ISTE Member in College Level.
- Good Team Hockey Player in College Level.
CO-CURRICULAR ACTIVITES :
- Winner up in School, District and Divisional level in Hockey.
- Runner up in Inter polytechnic College level in Hockey
- Winner up in Throw ball and Sat Ball Throw in School Level.
INTERESTS AND ACTIVITIES :
- Animation ,Design
- Drawing, Driving
- Listening to Music.
I hereby declare that the above information is true to the best of my knowledge.
Place : Virudhunagar
Date : P.Krishna Kumar
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4380692
Date & Time : 17th Jul 2011 1:38 PM (UTC)
IP Address : 115.117.241.205
Browser Info : Mozilla/5.0 (Windows NT 6.1; rv:5.0) Gecko/20100101 Firefox/5.0
Predicted Country : India
-
October 19th, 2011, 06:12 PM
Post Count Number #3
Curriculum Vitae
Curriculum Vitae
Ekta Mehta
Email : ektamehta1988 AT gmail.com
Brand Statement
Seeking a position as a management professional where my communication skills coupled with the study of Psychology to understand human behaviour and now with a `management degree that equips me to face the challenges in the new emerging globalized business scenario successfully and contribute to the organization where I work.
Work Experience
- June 2011- September 2011 : Assistant Sales Manager,
Shree Uma Plastic Industries Pvt. Ltd.
Jodhpur.
- Job Responsibilities :
- Engaged in manufacturing, printing and packaging material, having customers all over the country.
- Promoting sales of products- customer order acquisition, follow-up and delivery
- Corrections to be made in the sample designs
- Responsible for arranging transportation, keeping a record of the dispatch details and assessing the grievances of the clients, if any.
- Managing various administrative works related to labour and reporting to the Managing Director.
- July 2010-November 2010 : Information Analyst (News Abstractor),
Centre for Monitoring Indian Economy,
Udai Infotainment Ltd.
Jodhpur.
The Centre for Monitoring Indian Economy (CMIE) is an independent economic think-tank headquartered in Mumbai, India. They provide information solutions in the form of databases and research reports. They have built the largest database on the Indian economy and companies.
- Job Responsibilities :
- To abstract the News related to the business houses and banks from various business newspapers viz The Hindu, The Financial Express, The Economic Times, The Hindustan Times, Business Standard among others.
- Rewriting on average 45-50 news articles and uploading the same on CMIE website on daily basis.
- More than 900 news abstracts have been published.
Academic Profile
Degree/Class Year Specialization University/Board Name of the Institution/School Percentage (%)
M.B.A 2010 Human Resource and Marketing (Dual specialization) Jodhpur National University (J.N.U) Jodhpur National University (J.N.U) 70.84% (Aggregate)
B.A. 2008 1)English Literature, 2) Psychology 3) Sociology. Jai Narain Vyas University, Jodhpur .(J.N.V.U) Kamla Nehru college, Jodhpur. (K.N.Hall) 63% (Aggregate)
XII (Arts) 2005 1)English Literature 2) Political Science 3) History. Rajasthan Board (R.B.S.E) Saint Patrick’s Vidya Bhawan, Jodhpur 62%
Training/ Projects/ Workshops
- Undergone a vigorous training at IDBI Fortis Life Insurance Company Ltd., Jaipur from 16 June to 31 July 2009 under the expert guidance of Mrs. Anuja Singhal (Sr. Agency Manager) and worked on the project titled “Analysis of Recruitment Process and Customer Investment Patterns in Insurance Sector”
.
- Worked on a project titled “Purchasing with Anxiety : A Study with Special Reference to Urban Women” at Post Graduate level. (M.B.A). It included an indepth study to find how anxiety can be a motivating factor for urban woman thereby enhancing happiness.
- Worked on several projects at graduate level (B.A.) :
- Verbal Test of Intelligence
- Maudsely Personality Inventory for Personality Test.
- Anxiety Assessment Test.
- Vocational Interest Record Test.
- IQ Test for measuring performance study of habits and attitude.
- Attended a workshop on “Entrepreneurship in Business and Event Management” conducted by K.T.M in association with Bits Pilani dated 24th and 25th Feb.09.
Personal Skills
- Fast paced, quick learner, versatile, self motivated, diligent with good inter personal skills.
- My real strength is my attention to detail. I pride myself on my reputation for following through and meeting deadlines. When I commit to doing something, I make sure it gets done, and on time.
Industrial Visit
- Visited industries (March10th-17th2010) like Parle Products Pvt. Ltd, Mahanand Dairy and Bisleri in Mumbai.
Extra Mural Activities
- Participated in cultural activities both at school and college level.
- Participated in English essay writing competitions at school level.
-
November 5th, 2011, 11:34 AM
Post Count Number #4
mechanical engineer
I complete my BE in 2010 and nw i am working as a quality engineer in byd electronics for the past 1 yr
-
November 8th, 2011, 04:44 PM
Post Count Number #5
the capital of india is delhi . the red fort is also located in delhi