Inox India Ltd Baroda Vadodara : Piping Design Engineer

[mskavi]

Inox India Ltd
http://www.inoxindia.com

Company Profile
INOX INDIA LTD. is a leading cryogenic engineering company, manufacturing vacuum insulated cryogenic tanks and associated equipment. It also undertakes contracts in the field of cryogenic engineering for supply of equipment on turnkey basis. The company is certified under ISO 9001 and has also obtained U stamp (ASME).

Senior Piping Design Engineer(Very Very Urgent-Baroda)
Experience: 5 - 8 Years
Location: Vadodara/Baroda

Job Description
Process Flow Diagram
System P & ID For Storage Tank
Plot Plan
Equipment Layout
Schematic piping Layout
Piping Support Detail

Desired Candidate Profile
Candidate should be B.E(Mech)with piping design exp.

Upload your resume here: http://www.inoxindia.com/Test/Job_HR.htm

Address:
Inox India Limited
ABS Tower, 4th Floor,
Old Padra Road,
Vadodara 390 007
Gujarat, India.

Tel :+91 (265) 305 6100 / 234 3125 / 234 3123 / 234 3124 / 234 3226
Fax : +91 (265) 233 3398 / 234 1449

[Guest]

To,
HR Manager
Inox India,
Baroda

Post Required: -
SR. DESIGN ENGINEER / MANAGER Pr. & Storage Vessels.
3+ Year Exp in CAD/CAM as a Sr Design Engineer/Manager.

Respected Sir/Mam
Good Morning,

Thank you for giving me your imperative time. I hope today you have pleasing day & doing well.

I am NIMESH SONI, Done my Masters in Mechanical (Cryogenic) Engineering from L.D. College of Engineering ‘Gujarat University’ in Ahmedabad, India. My Dissertation/Project work in M.E. Study is by Experimental and ANSYS analysis for “Pulse Tube Refrigerator/Cryocooler”. Till this days I have got Distinction and through out result from my Cryogenic (M.E.) examinations. My C.V. (Biodata) is in attachment.

My aim is to join my hands to your company and make my future with your company growth.

So, after your conformation I can join you As Soon As Possible.

• Previous Salary as a Design/Project Head
Before two years when M.E. Study is not started: - 2, 50,000/- INRs. CTC PER ANNUAL

• Expected Salary: - As your company policy. Salary is not big stuff for Suitable post / Work Satisfaction.

I'll waiting for your healthy reply.

Should you need any assistance, please let me know.

I would like, look forward to hear from you soon.

Thanks & regards,

MR. NIMESH SONI
M.E. MECH. ENGG.
soninimeshk@gmail.com
soninimeshk@ymail.com
soninimeshk@skype.com

[Guest]

Curriculum Vitae
.
HARSHIKESH VAGHELA UK (M)
E-mail : harshikesh_vaghela AT yahoo.com
Career Objective :
To create footwork in the area of design where I can apply my skills to the best use and which provides me with an opportunity to assimilate more knowledge.
Profile :
1 Proficiency in study piping required for Equipment and piping Layout.
2 Pipe Rack Study and prepare loading data.
3 Tank farm – Equipment and Piping Layout.
4 Distillation Column – Equipment and Piping Layout.
5 Proficient in preparing Piping Material Specification, Valves and Special Parts Data Sheet.
6 Proficient in Pressure Calculation as per ASME B 31.3 like Pipe Thickness, Reinforcement Pad, Miter Bend.
7 Familiar with ASME, API, BS, IS Codes & Standards.
8 Preparing Tendering MTO, Bulk MTO and Final MTO.
9 Overview of CEASSER.
10 Good knowledge of BENTLY AUTO PIPELINE.
11 Familiar with Plot Plan development.
12 Review of PFDs, P&IDs and Vendor Data Drawing.
Educational Qualification :
Piping Engineering : Graduation course in piping Engineering from CAD STAR SOLUTAIONS PVT. LTD., Vadodara, Gujarat, INDIA.
Qualification : Diploma in Mechanical engineering from NIRMA UNIVERSITY OF SCIENCE AND TECHNOLOGY, AHMEDABAD,Gujarat, INDIA in JuLY-2OO7 with 60.00 %.
Presently studying in UNIVERSITY OF HERTFORDSHIRE, United kingdom, and BENG. (HONS.) MECHANICAL Engineering, 3nd yr

Technical skills
Auto-CAD, PRO-PLANT VR., MS-Office, Windows OS, CAD & CAM, and Internet.MATLAB/Simulink : Engineering Equation Solver, Basic Programming: Machining and CNC operations.
Industrial Exposure :
1 NIRMA Ltd,Savli,Vadodara,Gujrat, India. (FOR 6 MONTHS)
Item : Manufacturing of LAB. (Linear Alkyl Benzene)
Involvement : Site visit, Basic Design, Proposal preparation, Estimation, Drawings and Calculations preparation
2 Meghdoot pumps. Ltd, Ahmedabad ,Gujrat,India.(FOR 6 MONTHS)
Item : Meghdoot pumps. Ltd.
Involvement : Design and detail engineering, Preparation of Drawings and Calculations.
Experience Summary :
2 years Total Experience in piping & Equipment field
Previous Employer :
Company Name : ZEPPLINE GROUP- INDIA. Vadodara , Gujarat , India.
Time Period : Since November.-2007 to Jun-2009
Responsibility during projects
- Assigned the tasks of preparing piping drawings with bill of materials , layouts, isometric and 3D graphic presentation.
- Prepare advance bill of material.
- Responsible for providing guidance to Auto Plant operators and solves technical issues
- Handled the tasks of preparing drawing package for construction piping service under the instructions of project managers
- Assigned the responsibilities of project filing and maintaining organized project books
- Responsible for beta testing and downloading from FTP site of drawings
- Performed other related tasks as required
Project completed for tie point measurement and pipeline routing :
1) COMPANY NAME : RELIANCE INDUSTRIES LIMITED , HAZIRA,INDIA
PROJECT : (A) M.A.H (MA HYDROLYSIS PLANT)
(B) S.H. RECOVERY
2) COMPANY NAME : GUJARAT CHEMICAL PORT TERMINAL COMPANY LTD.,INDIA
PROJECT : PROPYLENE OXIDE STORAGE & TRANSPORTATION FACILITY.
3) COMPANY NAME : APOLLO TRYES LTD. , Vadodara,INDIA
PROJECT : OTR AND PCR EXPANSION
Synopsis :
- Pleasing personality, Creative mind set.
- Quick learner and easily adaptable to new technologies.
- Excellent team player skills.
- Maintaining diplomatic relations with contractor.
Areas of Interest :
- To gain a complete knowledge and application of technical principles, theories and concepts in the concerned field
- To contribute my best to meet the goals and objectives of the organization

[Guest]

RESUME
Sandeep M. Meghani
E-mail : sandeep.meghani86 AT gmail.com

Discipline Bachelor in Mechanical Engineering.
EDUCATIONAL DETAIL :
Exam. Board/Uni. Year of Passing Grade Percentage (%)
B.M.E RGTU., Bhopal 2011 First Class 66.66%
(Detailed %age of semester wise are given at end of resume)
D.M.E T.E.B., Gandhinagar 2006 First Class 63.08%
S.S.C. G.S.E.B., Gandhinagar 2001 Distinction 73.86 %
COMPUTER KNOWLEDGE :
Computer Skill : Introduction to Computer, MS Office.
Technical Skill : AutoCAD, Pro-E, SOLID work
Completed from : CADD centre , INDORE
TECHNICAL QUALIFICATION :
Course Nature of Contents Institute
NON DESTRUCTIVE TESING (NDT) - RADIOGRAPHY TEST (RT)
- ULTRA SONIC TEST (UT)
- MAGNETIC PARTICLE TESTING (MPT)
- DYE PENETRATE TESTING (DPT) BAGCHI INSTITUTE OF NDT
AT JAMNAGAR
EXPERICENCE :
TOTAL EXPERICENCE : 2 YEAR , After Completion of Diploma mechanical Engg.

NAME OF COMPANY Reliance Industries Ltd., Jamnagar.
DURATION From 20.04.2007 to 20.06.2008
JOB TYPE Structural, Piping & tank and ancillary work.
JOB PROFILE

Worked as Engineer (QA/QC), being engaged in Quality Management Department. (QMD)
Maintaining Services are as follows :
- Inspection of Welded Joint, DPT, MPT of Welded Joint of UG/AG pipeline
- Computerized Documentation
- Inspection of Hydro Test, Holyday Test, Lick Test of UG Pipeline
- Qualify Welder by Welder Qualification Test.
- Supervision on Contractor QC Activity
- Observation on Repair, %age for each Pipe-Welder
- Quality Surveillance during Day and Night Shift
NAME OF COMPANY SPIM ENGINEERING PVT. LTD At Hazira (Essar Contruction Ltd.), Surat
DURATION From 05.06.2006 to 15.04.2007
JOB TYPE Structural
JOB PROFILE

I had worked as an Execution Engineer at abovementioned Company, involving in Fabrication, Quality Control Job.
Functional as well as descriptive details as follows :
- Offering Inspection Report
- Daily Inspection Report
- Weld Visual Report
- Report of Ultrasonic, Radiographic and Dye Penetrate Test.
- WPS & PQR Reports
- Welder’s Qualification Report
- Routine Functional Progress Report to Superior and Concerned Authorities.
B.M.E SEMESTER WISE RESULTS :
Semester III IV V VI VII VIII
%age 44.10% 56.90% 54.00% 64.30% 70.30% 78.30%
Year/Pass Dec-2009 May-2009 Dec-2010 May-2010 Dec-2011 May-2011

[Guest]

CURRICULUM VITAE
SANKET VIJAY NIKAM
E-mail : sanket2889nikam AT gmail.com

CAREER OBJECTIVE
To be associated with a progressive organization which can provide me with a dynamic work sphere to extract my inherent skills as a Professional, use and develop my aptitude to further the organization’s objectives and also attain my career targets in the progress.
EDUCATION
Examination Percentage Passing year Institute
Board/University
PGD IN PIPING ENGG 72.15 % DEC2011 SUVIDYA INSTITUED
B.E MECHANICAL 63.73 % MAY2011 MUMBAI
PIPING SKILL
- Pipe wall thickness calculation.
- Preparing Nozzle orientations for horizontal and vertical equipments
- Selecting the sizes and materials based on ASME, ASTM Standards.
- Preparing final General Arrangement Drawings and Equipment location drawing.
- Modeling the Equipments & Instruments from Vendor detail documents.
- Preparing Material take off.
- Preparation of equipment as per general arrangement drawings and updating equipment modeling.
- Preparations of initial pipe rack span calculation.
- Well versed with ASME 31.3 Codes and standards.
- Fabrication of loops
- Knowledge of piping basic material
- Preparation of piping ISO drawings.
EXTRA CURRICULAR ACTIVITIES & ACHIEVEMENTS
1. Participated in Jr. College Chess competition and win Silver Medal two times.
2. Participated in Jr. College T.T competition and win Champion trophy.
3. Participated in college Chess competition and win Silver Medal.
4. Participated in college T.T competition and win Silver Medal.
5. Event organizer in college annual day functions and other technical events.
6. Complete the Civil Defense Course.
INTERESTED ACTIVITIES & HOBBIES
- Playing Chess, Table-Tennis and cricket.
- To drive different Bikes,Cars.

DECLARATION
I consider myself familiar with ‘MECHANICAL’ Aspects. I am also confident of my ability to work in a team.
I hereby declare that the information furnished above is true to the best of my knowledge.
Date :
Place : ULHASNAGAR (Maharashtra)
(SANKET VIJAY NIKAM)

[Guest]

Dear sir,
please find job for me related to pipeline.
Thanks&Regards,
Satyendra kumar chaurasia

[Unregistered]

Objective :
Seeking a challenging and a rewarding job in the field of piping to apply my valuable knowledge in the company's growth.

Profile :
I have completed piping design engineering in Suvidhya Institute of Technology – Mumbai.

Technical Skill :
** Proficient in Piping design Engineering in Oil and Gas sector.
** In depth knowledge of Code for Piping, ASME 31.3, ASME 31.1, ASTM, ANSI, API standards and applies these requirements on projects.
** Proficient in Pump Piping, Mechanical Data Sheet, Instrument Hook-up (Level Gauge, Level Transmitter),

Tank Equipment Layout :
** Basic Knowledge of Distillation column.
** Proficient in Pipe thickness calculation, Miter Bend calculations, Branching table.
** Proficient in making MTO and Piping Material Specification.
** Pursuing depth knowledge of PDMS (3D Modeling), AutoCAD.
** Profound knowledge of isometric designing and conceptual designing.

Project Activities :
** To shine in the field of conceptual designing and Piping modeling
** To acquire more practical knowledge in ASME codes of Pipes, valves and tubes
** Profcient in Isometric, MTO,P& ID,PMS ( Piping Material Specification )

Career Work Experience :
Sunrise Engineering Solution Pvt. Ltd.
( From June 2010 to July 2011 , I have worked After Diploma In Mechanical Engineering )

One of the leading EPC company, globally recognized in the field of Refinery, Petrochemicals, Oil & Gas Projects.
Nature Of Work :
** According to ASTM and ASME B31.3 , ASME B31.1 related following all standard.
** Piping layouts in (Auto CAD software) Large bore and Small bore piping.
** Isometric drawings (Piping)
** Equipment drawing layout.
** Preparing Support drawing, and Piping BOM.
** I have also knowledge of Pipe Thickness calculation , Mitre bend calculation ,Preparing Branch table, making MTO with code standards.
** I have work on Different Assembly and preparing MTO on this.

Fresher Project Report :
DESIGN AND MODELING OF WIND TURBINE :
June 2015 – Present
** I have work on project title “DESIGN AND MODELING OF WIND TURBINE” during Degree final year.
** To the Aim of the project is to reduce the swipe area of wind turbine with the used of analytical method as well as also used of Modeling software.
Training Report :
** I have also done Vocational Training at SIEMENS LTD during period of June 2014.
Achievement & Participation :
** Won 1st prize in Quiz Competition, Technical festival of Sigma Institute of Engineering And Technology.
** Won 1st prize in a one minute to win event at Sigma Institute of Engineering And Technology.
** Won 2st prize in chess event Sigma Institute of Engineering And Technology.
** Secured RUNNER UP position in crazy cricket event at Sigma Institute of Engineering And Technology.
** Participated in gaming zone Technical festival of Sigma Institute of Engineering And Technology.

Educational Qualification :
Board / University | Class | Year of Passing | Percentage (%) :
G.S.E.B S.S.C March - 2007 76.62 %
M.S.University F.Y Diploma in Mechanical Engineer First semester 61.66%
M.S.University F.Y Diploma in Mechanical Engineer Second semester 57.17%
M.S.University S.Y.Diploma in Mechanical Engineer Third semester 61.14%
M.S.University S.Y.Diploma in Mechanical Engineer Fourth semester 57.06 %
M.S.University T.Y.Diploma in Mechanical Engineer Fifth semester 66.50%
M.S.University T.Y.Diploma in Mechanical Engineer Six semester 64.00%
Gujarat Technical University Bachelor of Mechanical Engineer First semester 7.86 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Second semester 7.76 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Third semester 8.23 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Fourth semester 8.29 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Fifth semester 6.97 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Six semester 6.97 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Seven semester 7.65 SPI
Gujarat Technical University Bachelor of Mechanical Engineer Eight semester 8.10 SPI

Declaration :
I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Date :
(PRADIP SUTARIYA)