www.hckrecruitment.nic.in Recruitment 2011 High Court of Kerala : Assistant

[muthukalee]

Name of the organisation : High Court Of Kerala ( hckrecruitment.nic.in )
Name of the post : Recruitment for Assistant in 2011

Applications are invited from qualified Indian citizens belonging to the following reservation group of communities in the State of Kerala for appointment to the No Candidate Available(NCA) vacancies in the post of ASSISTANT in the High Court of Kerala. Candidates shall apply online through the websites "hckrecruitment.nic.in" or "highcourtofkerala.nic.in". After applying online the candidate should take a system generated printout of the online application on A4 size paper, duly sign it, paste passport size photograph(taken within the last six months) at the place indicated and sign across it and send it along with Demand Draft to the High Court by post. No other means/modes ofapplication will be accepted. The sites will be open from 11 a.m. on 28-9-2011 to 4.30 p.m. on 11-11-2011. The last date for receipt of system generated printout of the online application is 4.30 p.m. on 21-11-2011.

Name of post : - ASSISTANT

Scale of pay : - 7990-12930(Prerevised)

Number of Vacancies : Scheduled Tribes - 2(Two), Scheduled Caste converts to Christianity - 2(Two).

Age limit : Scheduled Tribe candidates should have been born between 02-01-1971 and 01-01-1993(both days inclusive). Scheduled Caste converts to Christianity candidates should have been born between 02-01-1973 and 01-01-1993(both days inclusive).

Qualification : Bachelors Degree in the first or second class or equivalent grade, with a minimum of 50% marks for optional subjects OR Masters Degree OR Law Degree, awarded or recognised by any of the Universities in Kerala. In the case of Scheduled Tribes candidates, graduates with third class are also qualified to apply.

Desirable : Knowledge in computer operations.

Application Fee : `200/-. Scheduled Tribes and Unemployed Physically Handicapped candidates are exempted from payment of application fees. Scheduled Caste converts to Christianity candidates who apply for both the NCA vacancies and the regular vacancies need to take only one Demand Draft.

How to apply :-
The candidates (other than ST/Unemployed Physically Handicapped) should have their Demand Draft for `200/-ready before applying online as the Demand Draft details are required to be entered in the online application. The DD should not be dated before 28-9-2011 and after 11-11-2011. The candidates should write their name and address on the reverse of the Demand Draft and send it along with the system generated printout of the online application. Fees remitted in any other form will not be accepted.

The envelope containing the system generated printout of the online application bearing candidate's signature and photograph affixed on it and the Demand Draft shall be superscribed "Printout of the online application for the post of ASSISTANT(NCA Vacancies)" and sent to
"THE REGISTRAR GENERAL,
HIGH COURT OF KERALA,
ERNAKULAM, KOCHI-682 031".

More Details : http://www.hckrecruitment.nic.in/ass...TIFICATION.pdf

***************
General Instructions :
This is information on High Court Of Kerala Recruitment 2011 / Vacancies / Careers / to be filled, for the post of Assistant.
If you are looking for jobs / career in High Court Of Kerala, you have to apply by downloading the application form given in the link above.
Full details of recruitment in High Court Of Kerala can be had from the detailed advertisement link as given above.
You can also visit the careers page of High Court Of Kerala to know more about the selection procedure, latest results, other jobs vacancy requirements etc.
Please ensure that you apply before the last date as all government recruitment procedures adhere a strict policy on this.
***************

[Guest-IJT]

Name : Arul
Email : arulmech87 AT gmail.com
Designation / Skillset : Assistant Manager/Methoding for casting,casting simulation
Dear Sir,
I am an experienced Engineering professional who can offer significant abilities in the areas of production
(Methoding of casting, Moulding, Core shop , Fettling and Quality control ).
I am skilled in working with technical teams to provide information and solutions to potential and existing issues. I have directed teams, departments, and familiar with all managerial functions, including training and scheduling.
I am an effective organizer and planner. My outgoing and friendly nature allows me to interact well with other staff members at all levels. I am able to bring down the gap and also like a bridge between technical and non-technical persons.
I am sending herewith the details required by you can give an idea of my potential for making a worthwhile contribution to your company for appointment to the above captioned subject post. I do hope that merit and experience will meet with your approval and now awaiting to hear from you.
Thanking you in anticipation.
Faithfully yours
Arul Pandiyan

Resume :
Arul pandiyan.K
Mechanical Engineer (METHODING FOR CASTING, MODELLING -CATIAV5 ,NX7.5,CASTING SIMULATION ENGG)
SNAPSHOT
- 1+ years of experience in the METHODING FOR CASTING, CATIA V5,NX7.5, designer and casting simulation software ADSTEFAN, Z-CAST.
- Extensive experience in CATIA V5,NX7.5 & ADSTEFAN (Advanced Solidification Technology for Foundry Aided by Numerical Simulation), Z-CAST Software.
- Having good knowledge in METHODING OF CASTING process.
- Expertise in sand casting, shell casting, HPDC, LPDC, investment casting, simulation process.
- CAD/CAE tools include ADSTEFAN,Z-CAST ,UG NX7.5, CATIA V5 (part modelling drafting assembly sheet Mattel), and AutoCAD.
- Good customer interaction and demonstration about software to the customer, give the complete solution of casting process to the customer.
ACADEMICS
BE- Mechanical Engineering (Paavai Engineering College) Anna University Chennai in 2010 with 65%
HSC – Govt. Hr Sec School (TN-State board) 78%
SSLC- Little Flower Hr Sec School(TN-State board)86%
TECHNICAL PROFICIENCY
FOUNDRY KNOWLEDGE SOFTWARE SKILLS
Methoding of casting MODELLING CASTING FORGING CNC MS-OFFICE
Modelling the runner design as per practical Catia V5 ADSTEFAN AFDEX V-CNC GOOD KNOWLEDGE IN EXCEL
Pattern shop knowledge UG NX7.5 Z-CAST WORD
Casting inspection AUTOCAD POWER POINT PRESENTATION
Fettling, Moulding shop
Achievements in foundry
- Successfully did the pattern inspection for Spiner.com from Askar Microns Pvt Ltd in Mysore & reduce 5mm padding in the core box & reduce the fettling work.
- Pattern Inspection of Cholas turbo machinery & did the Methoding(steel casting 3 tonnes) with 58% of yield.
- Shanthi gears - pattern marking & mounting
- Hindustan turbo machinery pattern inspection & Casting Inspection..
- Made the thermocole pattern for Donobat group (castings)- Column ,Saddle, Ram ,Column base & casting inspection.
- Successfully did the thermocole pattern inspection for RDM Engg fly wheel castings(steel) & gave modelling,methoding & ADSTEFAN with 65 % yield.
- Successfully did the modelling , Methoding, Simulation done by ADSTEFAN with 80% yield (CI) for Radial Bearing, Housing( BHEL Hyderabad)
CAREER HIGHLIGHTS :
Bhuwalka Casting & Forging Pvt Ltd Assistant manager Feb 2011 in till date
Dhio R&E Pvt. Ltd - Bangalore Product Engineer July 2010 to Jan 2011 in Z-Cast
ProSIM R&D Pvt. Ltd. -Bangalore Trainee Engineer March 2010 to June 2010 in ADSTEFAN
March 2010 to still now
Responsibilities : - Methoding for casting, Design the Runner as Per practical.
- Casting Inspection , Pattern Inspection,
- Casting Simulation - ADSTEFAN
- Customer interaction and demonstration of Z-CAST,
- Performing modelling design calculations of casting component with CATIA V5,
UG NX7.5.
- Providing technical support to customer.
PROJECT PROFILE
Casting Simulation : Customer facing in foundry some shrinkage porosity problem with initial component design. The initial design has modelled in PRO-E, Catia V5. That initial component has performed in ADSTEFAN casting simulation software. The results were analysed and the customer has provided with the feedback regarding shrinkage porosities areas of the casting. We analysed the component and done more simulation find the solution.
Onsite job : Roots casting –Coimbatore ,Sand fits- Coimbatore, Shanthi Gears- Coimbatore, JRE Valves & Pumps Coimbatore,
ArunaAlloys-Madurai etc.
Seminars on CAE : Conducted seminars in Bangalore, Chennai, Coimbatore and Hyderabad
On casting simulation software’s (Z-CAST).
Feb2010 to July2010
Growth Path :
Final year project and training in ADSTEFAN.
- Performed application development activities, which includes casting Simulation, CATIA Design, Development of component & Methoding of casting process
- Managed project solution and demonstrated communication skills during requirements gathering
And design implementation phases.
- Performed feasibility study and understand on various casting process, estimated effort & scheduled development activities For Improvement, and involved in roll-out planning.
Additional Skills :
Languages : English, Tamil, and Kannada.
Interests : Reading, Playing chess, Cricket, football.

Place : Bangalore Yours Sincerely
Date : Arul Pandiyan.K
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4650032
Date & Time : 24th Sep 2011 12:53 PM (UTC)
IP Address : 182.72.150.178
Browser Info : Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.186 Safari/535.1
Predicted Country : India

[muhsina]

CURRICULA VITAE
Name : MUHSINA.K.
Educational Qualification
1) Academical : S.S.L.C
Plus Two
BSc Maths
MSc Maths (Result Waiting)
2) Technical : ITI - Drafts Man Civil