www.rttchyd.bsnl.co.in Regional Telecom Training Centre Hyderabad : BSNL Certified GSM RF Engineer Training

[muthukalee]

Name Of The Training Institute : Regional Telecom Training Centre

Location Of The Training Institute : Hyderabad

BSNL Certified RF Engineer :
The telecom sector has a huge demand for the trained and qualified engineers specializing in mobile telecommunications. The rationales behind this are as follows:
1. Indian telecom industry has around 13 mobile service providers now with more than 598.78 million mobile connections Industry is witnessing this kind of bullish growth over an year.
2. Rollout of 3G networks by the Indian telecom operators are in full swing
3. Expansion of mobile telecom networks is also taking place in Middle Eastern countries, Africa, etc.
4. There is a dearth of trained and qualified mobile telecom engineers in India, Middle East, Africa and Asia Pacific Region.

In order to fill up this growing demand of qualified professionals, BSNL, a fully owned Government of India company, is launching a certification-training program in GSM RF engineering at Regional Telecom Training Centre, Gachibowli, Hyderabad-32, India. The details of this course are as follows:

Course Name : BSNL Certified RF Engineer
BSNL Certified RF Engineer. The course will commence from 08th July -2013.

Course Duration :
1. One Month (Four weeks) of theoretical and practical training in Regional Telecom Training Centre Plus
2. One week Hands on practice on RF Planning Tool, Drive Test Tool etc., in the surrounding locations of the Regional Telecom Training Centre, Gachibowli, Hyderabad.

Course Highlights :
1. A Unique industry oriented academic initiative
2. Lectures from subject matter experts
3. Interaction from industry experts
4. Industrial oriented training
5. Different from present conventional teaching methods
6. Lectures and Practical in a ratio of 1:1
7. Participants will become job ready from the day one after the training
8. Practical hands-on on BTS Installation/ RF Optimization / Drive test tools
9. RF Planning Aspects / Planning tool Overview.

Who Can Apply :
1. Candidates who have completed Graduation in engineering in the disciplines of ECE / ETM or M.Sc .(Electronics).
2. Candidates should have at least 50% of academic marks in their engineering course.

How to Apply:
Download the registration form the site. Duly submit the same to the address mentioned under contacts/ correspondence along with the Registration Fee. (Follow any one of the Modes of Payment given below). Confirmation mail will be sent on receipt of application.

Course Fee : (Non BSNL Indian Candidates)
Registration Fee: Rs.200 + Service Tax (12.36%) [Non-Refundable] i.e. `. 225/-
Course Fee: Rs.18, 000 + Service Tax (12.36%) [Non-Refundable] i.e. `. 20,225/-
Mode of Payment: Payment of registration and course fees can be made in any of the three following modes

Documents to be submitted :
1.Duly Filled Application Form along with Photo Affixed on it.
2.One Stamp/ Passport Size Photo (Write The Name, on backside of Photo).
3.Photo & Address proof Xerox (Driving License, PAN, Ration card, Voter ID etc.)
4.B.Tech / M.Tech Certificate Xerox

Important Dates :
Registrations commence on: 17th June - 2013
Registrations close on: 3rd July - 2013
Payment of Course fee: up to 5th July - 2013
Course Commencement: 8th July - 2013
Course duration in RTTC: 8th July - 2013 – 2nd August - 2013
Field training at RTTC, Gachibowli: 5th August - 2013 to 8th August - 2013

Address for Communication :
Principal,
Regional Telecom Training Centre (RTTC),
Bharat Sanchar Nigam Limited (BSNL),
Gachibowli,
Hyderabad-500032.
Website : www.rttchyd.bsnl.co.in

Email Address: bdrttc@bsnl.co.in

[Guest]

CURRICULUM VITAE
KRISHNA REVATHI.K,
Email :revathi.krosuri8 AT gmail.com

OBJECTIVE :
Intend to build a career which helps me to explore myself fully and realize my potential. Willing to work as a key player in challenging and creative environment. To secure a challenging job in an organization, where my skills could be utilized and shared, for the growth of the organization and myself.
EDUCATIONAL QUALIFICATIONS :

ACADEMIC PROFILE :
S.No Qualification Year of Passing University/Board Percentage Obtained
1 B.Tech
(ECE) 20004_08 JNT University
Sri vasavi engg college (SVEC) 57.11%
2 Diploma
(ECE) 2001_04 Govt polytechnic for women kakinada 56.54%
3 S.S.C 1998-99 Board of Secondary Education, sree sree educational society, eluru. A.P 67%
SOFTWARE PROFICIENCY :
- Programming Languages : C,MATLAB
- Plat form : windows xp.
- Tools : MS-Office
ACHIVEMENTS :
- NATIONAL LEVEL PAPER PRESENTATION -2008
- One of the technical committee members on ‘VASAVI TECH
FEST 2K7’ paper presentations at my college.
- Participated mat lab & simulation workshop in our College at tadepalligudem.
EXTRA-CURRICULAR ACTIVITIES :
- Participated in the School level throw ball and kho-kho competitions.
- I won the NCC (national cadet corps) ‘B’ and ‘C’ certificates under the
authority of Ministry of Defence, Government of India.

Project :
Done a project on “A TWO STAGE CHARACTER SEGMENTATION
TECHNIQUE FOR PRINTED TELUGU TEXT” using MATLAB.
Relevant Skills : 1).Self Confidence & self motivation.
2).Flexible and adoptable in any working conditions.
3).Hard working & Helping nature.
4).Good leadership qualities.
EXPERIENCE : no experience.

DECLARATION
I here by declare that the above furnished information is true
and correct to the best of my knowledge and belief.
PLACE : HYDERABAD (KRISHNA REVATHI K).

[Guest]

RESUME
TABREZ AHMED
Email :- tabrez7901 AT gmail.com
OBJECTIVE :
To secure a job in the IT industry where I can utilise my knowledge for the organisation’s growth.
ACADEMIC SUMMARY :
- B.Tech in Electronics and Communication Engineering (2008 to 2012) From SSJ Engineering College Affiliated to JNTU Hyderabad with 61 % .
- Board Of Intermediate Education Andhra Pradesh in March 2008 with 92.8%.
- Board Of Secondary Education Andhra Pradesh in March 2006 with 80%.
TECHNICAL SKILLS :
Operating Systems : Windows xp/vista/7, windows server2003/2008.
Languages : C
Packages : Ms-Office
Tools : Keil u-Vision,Embedded ‘C’,Express PCB
Technical knowledge :-got trained in MCITP zoom technologies.
PROJECT WORK :-
Title : Authenticated And Access Control System For Device Using Smart Card Technology.
Organisation : Krest Technologies.
Technology : Smart card
Duration : 4 Months.
Description : The main objective of this project is Authenticated device control system which is implemented using smart card. This project is designed around a Microcontroller which forms the Control unit of the project. A smart card is used as an authentication for device control. According to this project the person who wants to access a device needs to carry his Smart Card with him. Whenever he wants to access the device, he needs to insert his smart card into the smart card Reader.
The hardware involved in the project is Microcontroller, Power supply, Smart Card, Smart Card Reader, Card Reader Driver and Devices to be controlled. This project finds its place in places where one wants to provide authentication over device control.
Hardware Components Used :
- Micro controller
- Smart card Reader
- Card Driver
- Appliances
- Power supply
Software Tools Used :
- Keil u-Vision
- Embedded ‘C’
- Express PCB
Declaration :
I here by declare that all the above mentioned details are true and genuine to the best of my knowledge.
Date : 19/6/2012 TABREZ AHMED
signature

[Guest]

CURRICULUM VITAE
M.MANOHAR
- : manimudiraj434 AT gmail.com
CAREER OBJECTIVE
To be associated with an esteemed organization that provides me an opportunity to show my skills, improve my knowledge with latest trends and to be a part of team that works dynamically and efficiently towards growth of the organization and satisfactory thereof.
COURSE INSTITUTION AFFILIATED TO YEAR PERCENTAGE
B. Tech NOVA COLLEGE OF ENGINEERING AND TECHNOLOGY JAWAHARLALNEHRU TECHNOLOGICAL UNIVERSITY 2009-2012 72.3%
INTERMEDIATE R.D JUNIOR COLLEGE BOARD OF INTERMEDIATE EDUCATION 2006-2008 89.5%
S.S.C PRATHIBHA VIDYA MANDIR HIGH SCHOOL SSC 2005-2006 82.8%
EXPERIENCE AND PROJECTS :

PROJECT 1 : MEMS MOUSE USING RF TECHNOLOGY
Environment : EMBEDED SYSTEM.
DESCRIPTION :
Microelectromechanical or microelectromechanical systems) is the technology of very small mechanical devices driven by electricity and it merges at the nano scale into NEMS
(nanoelectromechanical systems) and nanotechnology.
The main aim of this project is to display the hand movement using MEMS using RF. The MEMS will be fixed to the hand. Whenever the hand moves in any direction, the mechanical movement of the hand will be recognized by MEMS. MEMS converts this mechanical hand movement into equivalent electrical signals and sends it to the microcontroller. The microcontroller receives this and transmits the data to the RF transmitter. The RF transmitter finally transmits the data into air. At the receiver side, the RF receiver receives the data and passes to the PC for display.
PROJECT 2 : ELECTRONIC EYE WITH SECURITY DIAL UP SYSTEM
Environment : EMBEDED SYSTEM WITH MICRO CONTROLLER.
DESCRIPTION :
The main aim of this project is security giving to home or office or building etc.So here security is a primary concern inthis project.This is by using different sensors.And givin this information to the owner by a phone call.
In this security dial up system in the home we use different sensors to ditect the actions like fire alarm,unauthorised acess,wall breaking etc.When the sensors detect any of this unwanted actions it gives the signal to the micro controller.Then microcontroller send a signal to triggering circuit to activate the phone call to the required person number which is already saved.

SKILL SET :
Operating System : MS-Dos, Windows98, 2000, XP, VISTA.
Office application : All MS-Office Applications.
Technical Skills : C,C++,JAVA
Packages : MSoffice2003- Office2007.
EXTRA CURRICULAR ACTIVITY
- Presented paper on “RED TOCTON” in Nova College of Engineering And Technology Hyderabad .
- Presented paper on “HOME SECURITY DEVOLPMENT SYSTEM” in Nova College of Engineering And Technology Jangareddygudem.
Professional Competencies
- Team approach to meet challenges
- Innovative attitude to problem solving
- Aiming at excellence in work through self motivation
Personal Competencies
- Work effectively with diverse groups of people
- Fast Learner. Adapt well to changes and pressures in the workplace
- Friendly with an upbeat attitude
- Ambitious hardworking and committed to excellence
- Committed to deadlines and schedules
- Honest, Sincere and a Hard Worker with a high level of integrity
DECLARATION
I consider myself familiar with above mentioned Aspects. I am also confident of my ability to work in a team. I hereby declare that the information furnished above is true to the best of my knowledge.
Signature : M.MANOHAR.

[Guest]

M.R.satyanarayana
ramasatyanarayana.eee AT gmail.com

Objective :
To be employed with an organization which will offer me opportunities to learn and enhance my skills; as also provide adequate scope to contribute in a highly positive manner to the organization.

Qualification :
Course Board/University Institution Batch Aggregate
B.Tech (Electrical and Electronics ) Jawaharlal Nehru Technological University (J.N.T.U.H) HYDERABAD. Dr. paul Raj Engineering College 2008-2012 73%
Intermediate Board Of Intermediate Triveni Junior College 2006-2008 89.9%
SSC BoardOf Secondary Z.P.H.S Dummugudem 2004-2005 86.8%

Technical Skills :
Programming Languages : Basics of C
Operating Systems Worked On : Microsoft word,MS excel
Tools Used : MAT Lab.

Strength :
- High motivation and positive attitude, quick learner & a self-starter.
- Comprehensive problem solving ability.
- Ability to multitask with equal focus on all areas
- Highly conscious about quality.

Project undertaken :
SYNOPSIS : In this project we can easily reduce the ripple current of a fuel cell by the simulation using matlab software ,the ripple current is reduced for a sigle- phase isolated converter using dc active filter with a center tap which improves the performance and life time of the fuel cell.

Achievements :
- Stood 1st in 10th class.
- Stood 1st in debate and essay writing held in school
- Participated workshop on robotics

Declaration :
I here by declare that all the above information furnished by me is true to the best of my knowledge.
Date :
Place :
(Satyanarayana.M.R)

[Guest]

BOKAM.DEEPAKKISHORE
E-Mail :deepakkishoreb77 AT gmail.com
kishore.deepu AT ymail.com

ACADAMIC QUALIFICATIONS
Qualification Name of the Institution University / Board Year of Passing Percentage
Graduation (B. Tech ,I.T) B BonamVenkataChalamayya Institute of Technology and science Amalapuram J.N.T.U Kakinada 2012 57.42
Intermediate Sri Chaitanya Junior Kalasala Kakinada Board of Intermediate Education 2008 58.4
SSC LEMS School Peddapuram Board of Secondary Education 2006 65
TECHNICAL SKILLS
Packages : MicroSoft office 2003/2007/2010.
Programming Languages : C, JAVA.
Database tools : Oracle10g, MySQL (beginning).
Web Technologies : HTML, XML, JavaScript, JSP, PHP, Flash (beginning).
Photo editing tool : Photoshop (beginning).
PROJECT PROFILE
Miniproject : CITY INFORMATION SYSTEM
Description : This is a web based project .In this user can register and login then see the information about the cities. In this administrator can update all information about the cities.
Role : One of the members that can do updating of all the information about the cities.
Main project : AUTOMATIC DISCOVERY OF PERSONAL NAME ALIAS FROM WEB
Description : This is a IEEE project which is related to data mining can be used for mining the data from web that can be used for generating the ranking and the aliasing names of web for easy searching by use this we can got the MRR(Mean Reciprocal rate) is up to 0.67 is solved.
PAPER PRESENTATIONS
- Given a Paper presentation on Emine : A Novel web mining approach in torque2k11 conducted by Godavari Institute of Engineering and Technology in Rajahmundry on March2011.
- Given Poster presentation on Natural Resources in torque2k11 conducted by Godavari Institute of Engineering and Technology in Rajahmundry on March2011.
EXTRA CURRICULAR ACTIVITIES
- Stood 2nd in Kho-Kho in school level competitions
- Collecting some interesting technologies and computer related shortcuts that are printed
in special edition of EENADU paper.
- Page Making(paper designs)
- stood 2nd price in class for collecting money to old age homes for old people conducted by
“Help Age India”
HOBBIES
- Playing shuttle, Playing Carroms.
- Internet Browsing.
- NewsPaper Reading.
Place : Rajahmundry
Date : (B.Deepakkishore)

[Guest]

I am a student of b.tech. 3rd year(electronics & communication) from avanthi's engneering collage visakhaptnam it's jntuk approve college. I want to do my summer training. I have no idea. What i do? Please help me.

[Unregistered]

Where is this telecom rf training going to be held on online or what?

[Unregistered]

3rd year engineering students will apply for the training

[Unregistered]

MCA students will apply for the training

[Unregistered]

sir i have completed degree may i learn this course to settle in a job

[Unregistered]

I need all the details for training
Education qualification & how can I go to next level?

[Unregistered]

I have completed degree. May I learn this course to settle in a job?