CV Samples For Engineers

[muthukalee]

Following is a CV Samples For Engineers

CURRICULUM VITAE
Name :
Contact Details :
Address :
E-mail :
Phone Number :

CAREER OBJECTIVE :
To maximize my skills for benefit of the company & my career by working hard to achieve a high position at my workplace, accepting every challenge and producing appreciable results.

ACADEMIC PROFILE :
S No. Examination Institute Board/ University % scored
1. B.Tech (Mechanical.Engg.) institute of technology and management, Up to 7th semester 62.1
2 DIPLOMA (Mechanical.Engg.) Govt. Polytechnic S.B.T.E 71.75
3. 12th Sr. Sec. School CBSE 63.8
4. 10th Sr. Sec. School, CBSE 74.8

PROJECT WORK :
Title : STUDY AND THE EFFECT OF PROCESS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF HSS DURING EDM PROCESS.
Duration : 24th January, 2011to April, 2011
Tool : Electric Discharge Machine
Worked as : Team Coordinator.

EXPERIENCE :
Working as an Asst. Maint. Engineer, with AAA PVT LTD. 100, Industrial Area, From DEC. 2009 to Till Date.
Profile : Company (Rolling Mill) is engaged in the manufacturing of steel TMT bars of 8mm,10mm,12mm,16mm,20mm,25mm,32mm and steel round of 5mm and 7mm.and also Company manufactures S.S.Flats of various sizes for leaf springs For Automobile Sectors. And flats for fabrication purpose i.e. domestic use.
Job Profile :
Ability to manage Production Department related to project.
Production knowledge of Hot Rolling.
A go – getter armed with strong commitment confidence and good communication skills a born leader who appreciates taking initiatives and challenges.
Ability to handle Maintenance Deptt.
Ability to maintain house keeping and other 5’S tools.

PROFESSIONAL TRAINING :
6 week training from xxx & Stamping Pvt.Ltd, in quality department 2nd year .
6week training from yyy Pvt. Ltd. in production & quality 3rd year.
Handling the instruments like vernier caliper, micrometer, height guage.
Handling the instrument like bore guage, snap guage, air ring gauge,dial guage, plating thickness tester, roughness tester,brinel hardness tester.
Knowledge about 7 quality control tools, general drawing.

PROFESSIONAL PROFICIENCY :
Knowledge of AutoCAD

HOBBIES :
Playing volley ball
Listening music, Muscular exercise

STRENGTHS :
Good Team coordinator, Industrious
Co-operative, quick to learn, sincere and hard working.

ADDITIONAL INFORMATION :
Field of interest : Quality Control, Production, R&D.
Location Preference : Any Where in DELHI NCR.
Regular blood donator.

PERSONAL PROFILE :
Date Of Birth : ------
Marital Status : ----------
Languages Known : --------
Nationality : --------

DECLARATION :
I consider myself familiar with Mechanical Engineering Aspects. I am also confident of my ability to work in a team. I hereby declare that the information given above is true to the best of my knowledge & belief.

Place : ---------
Date : ----------

[Guest-IJT]

Name : SANTHOSH KUMAR
Email : santhoshkumar092004 AT yahoo.co.in
Designation / Skillset : sr.engineer
MYSELF SANTHOSH KUIMAR I DONE DIPLOMA IN TOOL & DIE MAKING ,HAVING TOTAL 7 YEARS EXPERIENCE IN MANUFACTURING AND MAINTAINING OF PRESSURE DIE CASTING DIES.

Resume :

Seeking managerial assignments in Tool Room Operations with a growth oriented organization
________________________________________
Executive Summary
- Diploma in Tool & Die Making with 7 years experience in Tool manufacturing, tool maintainence,Tooling Solutions & Development, Quality Assurance, ,Process Enhancement and Man Management.
- PRESENTLY WORKING IN JAYA HIND INDUSTRIES LTD ,PUNE AS AN ENGINEER IN DIE MAINTAINENCE(PDC)DEPT IN OFFICERS CADRE(GRADE 05)
- Expertise in planning & controlling the tooling solutions & development operations. Skills in conceptualizing and effecting process initiatives to enhance efficiency and productivity.
- Possess sound knowledge in making and maintaining of all types of plastic moulds, die casting tools, press tools, jigs and fixtures.
- Gained knowledge about quality system like 5S and TPM.
- Strong ability to read/ interpret engineering drawings with proficiency in designing & developing new tooling in conformance to pre-defined technical specifications.
- An effective communicator with excellent relationship management skills and strong analytical, problem solving & organizational abilities. Possess a flexible & detail oriented attitude.
________________________________________
Areas of Exposure
Tool Design & Development
- Conducting specification study, quotation enquiry study & finalization, vendor selection & finalization, schedule for development, first sample approval, tool modification and final part approval.
- Reviewing the engineering / design changes & resolving quality related problems associated with design.
- Ascertaining requirements of material for new product development activities in the tool room, die maintenance & interfacing with vendors for cost effective, timely sourcing of quality material.
- Troubleshooting all technical problems; conducting various trails & inspections to ensure that tooling developed are in compliance with pre-set technical specifications.
- Modifying the existing equipment to meet new requirement.
- Establishing the manufacturing process in-house/ out-side at vendor end.
________________________________________Professional Experience
JAYA HIND INDUSTRIES LTD 17 JAN 2011
DIE MAINTAINENCE ENGINEER IN PDC DEPT AT OFFICERS CADRE (GRADE 05)
Accountabilities :
- Following up, planning & assembly of stand by dies. And taking quick decision for break down dies &solving problem in minimum time.
Major Projects Undertaken :
- FORD DV 4 CYLINDER BLOCK (FORD) - RUNNING IN B3200 TON MACHINE
- FORD DV 5 BED PLATE (FORD)-RUNNING IN B2200 TON MACHINE
- CUMMINS DRIP PAN(CUMMINS)-RUNNING IN B1600 TON MACHINE
- MUL VERSA OIL PAN(MARUTI UDYOG LTD)-RUNNING IN IDRA1450TON MACHINE
Aurangabad Electricals Ltd., Aurangabad APR2005 –JAN2011
Senior Engineer Tool Room
Accountabilities :
- Following up, planning & assembly of PDC,MOULD Components of various automobile and electronic component.
Highlights :
- Successfully manufactured Die Casting Die for the company's prestigious project CRANK CASE (1600ton) for Lombardini 15LD 400 engines. Recognised by the company for following up and manufacturing the product.
- Bagged the Merit Award at May 2006.
Major Projects Undertaken :
- Crank Case (Piaggio)
- Master Cylinder (Hero Honda)
- Foot Brake Valve (Knor Bremse)
- Bracket Hanger (Delphi)
- Bearing Frame (Tata)
- Oil Pan (OMR, Italy)
- GEN COVER (BAJAJ)
Kenpoly Engineering Industries, Mangalore Aug’04-Apr’05
TOOL&DIE MAKER
Major Projects Undertaken :
- Pipe connector for Molex.
- For various types of handhold items like bucket, jug & mugs.
Hitech Dies & Tools, Mysore Aug’03-Jul’04
Trainee Tool & Die Maker
Major Projects Undertaken :
- Manufacturing extrusion die of door hinge for Jindal Aluminium.
- Blow mould of pet bottle for Sai Agro.
________________________________________
Academic Credentials
2004 Diploma in Tool & Die Making from GT&TC, Mangalore with 76.00% (Mould, Diecasting, Press tools making, and related theories, Heat treatment, Tool Room Practice-Estimation and Costing)
________________________________________
CAD Proficiency : AutoCAD R14 & 2000 and CATIA V5R16
________________________________________
Academic Project
Project : Manufacturing of 8-cavity plastic mould for bottle cap
Organisation : Hitech Dies & Tools, Mysore
Client : Sai Agro Irrigation Equipment

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4436880
Date & Time : 2nd Aug 2011 1:53 PM (UTC)
IP Address : 115.252.100.77
Browser Info : Mozilla/5.0 (Windows NT 5.1; rv:5.0) Gecko/20100101 Firefox/5.0
Predicted Country []: India