Resume Objective For Electrical Engineer

[muthukalee]

Following is a Resume Objective For Electrical Engineer

CURRICULUM VITAE
Name :
Contact Details :
Address :
E-mail :
Phone Number :

CAREER OBJECTIVE :
To work in a challenging environment demanding all my skills and efforts to contribute to the development of organization and myself with impressive performance.

ACADEMIC QUALIFICATION :
• Completed B.E ELECTRICAL & ELECTRONICS ENGINEERING with an aggregate of 71%
• Completed Higher Secondary Course with an aggregate of 81% marks
• Completed Matriculation Exam with an aggregate of 87% marks

WORKING EXPERIENCE :
• Working in Electrical maintenance department from 29.07.2010 to till date.
• 1010 KVA DG set handling.
• 2500 KVA Transformer, Buchholz relay, circuit breaker maintenance.

COMPUTER SKILLS :
Languages : Basics in C & C++
Packages : Auto-CAD

FIELD OF INTEREST :
Electrical Machines
Power Electronics

CO-CURRICULAR ACTIVITIES :
Have participated workshop on “MODERN TRENDS IN ENHANCED ENERGY SUPERVISION” during September 2010.
Have participated in ORGANIZING COMMITTEE for SPARK2K11-a National level technical symposium.

ACHIEVEMENTS :
Got taluk rank in 10th (English & Tamil)
Won prizes in volleyball at school zone.

PROJECT WORK :
POWER FACTOR CORRECTION OF SINGLE PHASE BOOST PRE-REGULATOR
PROJECT DESCRIPTION : Boost converter is used for stepping up the input voltage.This method is used for maintaining the input power factor constant.If the load is varied, the output voltage varies,which causes a change in the input power factor.To maintain the input power factor constant,the value of the output voltage is kept constant by varying the switching frequency of the switching device.

HOBBIES :
Playing Cricket & listening the music.

STRENGTH :
Hard work.
Self-confidence.

PERSONAL PROFILE :
Date of Birth : -------
Languages Known : ----------
Marital Status : ----------
Nationality : ----------

DECLARATION :
I do here by declare that all the information stated above is true to the best of my knowledge and belief.

PLACE : ----------
DATE : ----------

[Guest-IJT]

Name : Prashant dhuri
Email : prashantdhuri84 AT gmail.com
Designation / Skillset : Senior Electrical Engg

Resume :

Objective :
To explore myself fully & realize my potential in engg. & Manufacturing, where in my technical skills & experience is asset to the dynamic business needs.

Education :
Name of School / College Board / Univ Year of Passing Certificate Result
% :
Khopoli Polytechnic,Khopoli.. Mumbai university. 2006
Dip. Elect.Engg.
(DEE) 54 %
J.C.Mahindra Memorial School. Mumbai university 2002
S.S.C 65.46 %

PROFESSIONAL EXPERIENCE :
NRB BEARINGS LIMITED : An Bearings manufacturing unit located at 2nd Pokhran road, Thane.
Tenure : Working from Feb 7th 2011 till date
Designation : Sr.Engineer, Maintenance.
Machines Handled :
- Grinding m/cs ( Thrufeed,HBM,Rimaco)
- Press m/cs ( LBM 16t & 63t, Godreg 16t,40t& 100t , Rigimax )
- Maintainance of electrical m/c such as AC/DC motors, HT/LT panels, circuit breakers, Gen 500kva & 320kva.
Job Responsibilities in NRB BEARINGS LIMITED :
1. Break-down maintenance : Effectively handling Break-down maintenance of m/cs with focus on reducing MTTR.
2. Preventive Maintenance : Scheduling & executing monthly and quarterly preventive maintenance. Co-ordinating with Production Dept. for the scheduled preventive plan.
3. Predictive Maintenance : Predictive maintenance is done by analysing the breakdown reports of the critical m/c during P.M. The maintenance of the m/c is then undertaken by co-ordinating with the production department.
4. Spare Planning : Spare planning for all maintenance activities is carried out in Oracle. This includes, indenting of materials, giving material requisition and stock checking.
5. Cost control activity : - Close monitoring of hydraulic oil consumption and reducing the consumption. Spare part indigenes for imported spares. Power cost reduction.

VE COMMERCIAL VEHICLES LIMITED :(A Volvo Group and Eicher Motors joint venture): An Automobile Gear Manufacturing unit located at Manpada, Thane.
Tenure : Working from Octomber 2007 till Feb 2011.
Designation : Sr.Engineer, Maintenance (L5)
Machines Handled :
- Gleason gear cutting m/c (608 R/F, 610 U., 22 generator, 116 R/F)
- Hobbing m/c (Cooper Pfauter, HMT, Cleaveland,)
- Shaping m/c (Lorenz, SRI 180, Demm)
- Cylindrical grinding m/c (HMT, Fortuna, WMW, Toss)
- Bore grinding m/c (Linder, Nova, WMW, Jung,)
- CNC m/c- (Hobbing, shaving, bore grinding, cyl.grinding, Gleason lapper)

Job Responsibilities in EICHER ENGINEERING COMPONENTS :
1. Break-down maintenance : Effectively handling Break-down maintenance of m/cs with focus on reducing MTTR.
2. Preventive Maintenance : Scheduling & executing monthly and quarterly preventive maintenance. Co-ordinating with Production Dept. for the scheduled preventive plan.
3. Predictive Maintenance : Predictive maintenance is done by analysing the breakdown reports of the critical m/c during P.M. The maintenance of the m/c is then undertaken by co-ordinating with the production department.
4. Spare Planning : Spare planning for all maintenance activities is carried out in SAP R/3. This includes, indenting of materials, giving material requisition and stock checking.
5. SAP PM Module : Competent in operating this module which monitors all the activities of the department. (e.g. Breakdown maintenance, Spare part planning, costing of spares used in individual equipment etc.)
6. ISO/TS 16949 :2002- Active contribution in implementation and documentation of TS.
7. Cost control activity : - Close monitoring of hydraulic oil consumption and reducing the consumption. Spare part indigenes for imported spares. Power cost reduction.
8. Apart from the electrical breakdowns, I am also handling Mechanical & Hydraulics breakdowns.

THYSSEN KRUP ELECTRICAL STTEL PVT LTD. :
Worked in thyssen krup electrical steel pvt ltd in E lectrical power & maintainance dept.
For 1 year ( from June 2006 to may 2007)
JOB PROFILE :
1. Handling manpower to carry out breakdown & preventive maintainance.
2. Maintainance of electrical m/c such as Transformer , AC/DC motors,220 kv substation, HT/LT panels, circuit breakers , battery chargers.
3. Job planning in shift.

OTHER QUALIFICATION :
PLC- Programming logic control.
COMPUTER KNOWLEDGE :
OPERATING : DOS,Windows 2000/xp/2003 server
OFFICE SUITS : MSOffice 2003.
DATA BASE : Ms Access.

SAFETY COURSES :
EFA : Elementry First Aids.
FF : Fire Fighting.

Strength/Growth :
1 Hard working, self motivated, result oriented & having ability to learn & implement newer technologies quickly & efficiently.
2 Capable of adapting to changing environments.
Enjoy working as a team & strong believer in teamwork for organizational growth.

DATE OF BIRTH : 24/10/1985 MARITAL STATUS: Unmarried.
Present Salary Drawn : Rs. 2.8 Lac per annum.
Expected Salary : Rs. 4 Lac per annum.
DATE :-
PLACE :-

[Guest]

C.mohankumar [DEEE]
Address : palacode, dharmapuri
e_mail id :mohan111eee AT gmail.com.

MY PROJECT
Power saver cum securit alert system,
Date of birth: 29.071994.
Age: 19
Sex : male